Presario V5002ea random reboot and scrambled screen

Similar Questions

• Random reboots and freezes on end 2009 27 "iMac

  iMac (27-inch, late 2009)

  Intel Core i7 2.8 GHz

  8 GB 1067 MHz DDR3

  ATI Radeon HD 4850 512 MB

  Random freezes usually when Safari is running but not always - Random reboot to gray screen - multiple messages indicating problem with function sleep-wake

  I have;

  Re-installed OS 10.11.4 several times

  Erased the hard drive completely by booting from a USB key

  Run the system for several days without any migrated data or no additional program outside the standard OS X installed programs.

  Reset the PRAM

  Unfortunately, I can't start diagnosis Apple when restarting.

  I perform diagnostic tests according to the Linc Davis post with the results posted to the pastebin. See the link below.

  Random freezes and...

  Thank you and very grateful for any input...

  You seem to be dealing with a hardware failure.

  Do a 'genius' one appointment at an Apple Store, or select another authorized service provider. You may need to leave the machine there for several days.

  Back up the data on the internal disks before you turn on your computer to anyone. There are ways to back up a computer that is not fully functional - ask if you need advice.

  If privacy is a concern, delete the partitions of data with the ability to write zeros * (do it only if you have at least two backups complete, independent, and you know how to restore on a blank disc from any one of them.) Do not delete the recovery partition, if it is present.

  Keep your confidential data safe during the repair of the equipment

  Apple recommends that you remove permission to a device in the iTunes store before serving.

  * One SSD has no need to be set to zero.

• Random reboots and crashes with WUDFRd failed to load of the device

  I get random reboots and falls down and receive check the event viewer I see this -.

  event 219, kernel-PnP

  The driver failed to load unit WpdBusEnumRoot\UMB\2 \Driver\WUDFRd & 37c186b & 0 & STORAGE #VOLUME # _____? _USBSTOR #DISK & VEN_USB2. 0 & PROD_CARDREADER_CF & REV_0100 #606569746801 & 0 #.

  well if anyone knows what it is?

  Your problem is unlikely to be associated with the event ID: 219, which warns a driver did not load. In fact the driver load a few moments later and the portable device then works.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode.

  Please download and share with everyone copies of your System log and journal of the Application (two files) of your event to your OneDrive Viewer and post a link here.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do the same for the application log. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

  General remarks on event viewer
  http://www.gerryscomputertips.co.UK/syserrors5.htm

• ThinkPad Yoga 14 random reboots and keyboard stop

  I am a Yoga Thinkpad 14, which was purchased on January 6, 2016, Lenovo. The thinkpad is still under warranty. Lately, I've known random interruptions and blockages of the keyboard. I'm just browsing as usual. It was very well but is not a problem. I get 3-4 stops per day. The battery is under voltage, and it does not matter if the power cord is connected or not. It is not a problem of sleep or the issue of closing lid. It is stopping or blocking, and I don't know when he's going to do. I ran the diagnostics LSC and everything was fine. No error code. I think this could be a hardware problem as no new software or hardware was loaded and it was OK for 6 months so far. Can I submit a service request, but before that, are there any suggestions?

  The problem was that it was intermittent. I couldn't replicate the application myself. They had the laptop for a day. They ran a huge list of diagnoses and nothing came. So I think that it is more beneficial for them to replace the card. I can't blame them for not to isolate the problem. I sent the laptop in Tuesday. Get it back on Friday. So if yours is still under warranty, I would go in that direction. However most probably they will return the drive to stock up. I so copy all my data off in advance. Easy enough to do with a drive hard dock

• HP Pavilion dv7t-6100: switch to ATI RADEON video card. Hang, reboot, and white screen.

  Hello.

  I was using my laptop as usual, and like many other times I have tried to swich for High Performance video card.  At this time, Windows crashes; So I had to press the power button a few seconds until the computer turns off.

  Then, when I turned it on:

  -Anything on the screen (on the screen of the computer laptop and external monitor)

  -Cannot access BIOS

  -No boot sequence (operating system does not)

  -Led is ON (without LEDs + turn signals)

  -Keyboard unresponsive (caps lock led for instance does not change when I press on it)

  I tried several suggestions "base" that I found on the Internet with no luck:

  -Unplug the power cable, remove the battery

  -Remove the battery from the BIOS, RAM, HARD drive

  -Press the on switch / off 60 seconds

  So I guess something is dead here.  Could it be that the RADEON card no longer works?

  When the computer is turned on, what card uses by default?

  Is it possible (not through BIOS, not through OS) to specify to use the integrated graphics card Intel? Removing the RADEON card (is that even possible)?

  Thanks in advance.

  Hi @fedecris,

  Thank you for the update. Q0F7E4-5R7894-MFH14K-403 P 03 error code indicates a failure of the memory module. Please see the guide to maintenance and maintenance for recommended replacements. (the link is in my post above) Note Chapter 3, page 31, paragraph 23.

• Reboot and black screen

  Three or four times a day, I get a black screen and restart my computer.  This makes it especially when I'm home, but today it also is at work on a more sophisticated network.  Any suggestions?

  What year MBP and what operating system are you running? If you were to go to newspapers system and post a screen shot of the most recent stop who could help. In the meantime, try this. http://Reinout.vanrees.org/weblog/2015/01/06/MacBook-Pro-black-screen.htm

• Major problem with artifacts, reboots and black screens.

  1 HP m7790y

  2 Vista 32 bit

  3. no error message or the BSOD.

  4. no changes have been made recently.

  For about a month now, sometimes my computer shows a bunch of objects on the screen and the visuals will not change, but I think that my keyboard and mouse always work. I can do CTRL + ALT + DELETE and that the screen appears with no artifact, but as soon as I get by, artifacts return and the escape sequence does not work yet. If I have a video course or music, I hear a little, but then it gets screwed up. Then my computer is doing something akin to fade, but it is not. The GPU of the fan stops going, the screen goes black, and only the power light on my pc is on. Most of the time I have to press the power button and then turn back on again. Sometimes it restarts itself and shows a screen asking me how I want to start up.

  I used the HP Hardware Diagnostic tools and tested everything, but there is no errors for what it is. I can even play video games for long periods of time very well (Rome: Total War, The Walking Dead, Mass Effect 3, Company of Heroes). If the problem will occur, sometimes in the first 5 to 10 minutes of me having the computer. I've used Furmark with stress tests and there is no problem.

  I found another card that is the same model and use. Everything has been working fine (except for some BS that I won't get into ati catalyst graphics).

  Thank you very much for your help!

• Computer goes down to start-ups, blank screens, random reboots after the installation of Service Pack 3.

  Original title: problems since "Upgrade" from XP SP2 to SP3.

  I missed experience boot-ups, blank screens, random reboots and having to reboot several times to get my home page & then Office to appear since I updated to XP SP2 to SP3 - a Microsoft again found a solution to this bug or should I use the system restore and go back to SP2?

  Hi Gary,.

  You receive an error message or code when the computer does not start?

  It would be possible that Service Pack 3 is not installed correctly.

  (a) I suggest to uninstall Service Pack 3 from your computer.

  How to remove Windows XP Service Pack 3 from your computer

  (b) you can manually download & install Service pack 3 from this link and check if the problem persists.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4&displaylang=en

  
  Note: system requirements to install Windows XP SP3

  
  Reference: Learn how to install Windows XP Service Pack 3 (SP3)

  Hope the helps of information.

  Please post back and we do know.

• Y at - it virus? -Causing blue screens and random reboots

  Y at - it of viruses out there that are affecting the computers and blue screens and random reboots of the origin?

  There is, but your problems could be caused by other issues too,

  Tell us the information on your computer and we give information about the problem.

  you do something specific when you get the blue screen?

  you have anti-virus (what kind)

  did you install any software/hardware recently?

  a good way to fix a wide variety of pc problems is to run a chkdsk

  1. Hold the windows key
  2. Press R
  3. in the box that opens type of command, press enter
  4. type the following echo Y | CHKDSK C: /r
  5. Restart the computer

  It will scan your hard drive for errors that can be caused by being improprley stop, as when the death bluse screen occurs.

• Satellite Pro 6000 freezes and the screen is weird random pattern

  Hello

  I recently bought a SP6000 second-hand advertised as having "graphics problems". After 10 minutes or use the laptop freezes and the screen has a strange random pattern all acorss it. The speakers are also a strange hum. I have to stop the laptop and restart.

  I've updated the bios and drivers for card video from the toshiba site, but he always does. Can anyone help?

  Hello

  It's not easy to say why this problem occurs. You have purchased a second hand unit. It is possible that your device has a hardware malfunction, but I can't give you an answer why it is happening. I suppose that temperature increases after 10 min of use.
  Maybe this could be a problem. It could also be a fault of the motherboard. But these are just suggestions. In my opinion, you should ask the service for detailed information.

• How can I fix a black and white screen on the air from my iPad? I rebooted it and ran the last updated IOS 9.2 on it. It is stuck and won't return to the color. All other functions work except this.

  How can I fix a black and white screen on the air from my iPad? I rebooted it and ran the last updated IOS 9.2 on it. It is stuck and won't return to the color. All other functions work except this.

  Have you checked the settings > General > accessibility > greyscale > power off.

  If this does not work ty settings > General > accessibility > zoom > on. Triple, tap the screen with three fingers. Tap choose filter. Click None. Triple, tap the screen to get rid of the menu zoom. If you have enabled greyscale in zoom you can disable it in zoom.

• Compaq presario beep and black screen

  Compaq presario sr5450 desktop stop with beep .the beepis on 17 seconds and off for 10 seconds. Ichanged power supplys but still the same beep and black screen

  Hello

  "beep" codes normally indicate a hardware problem / failure.

  Go to your computer manufacturer's website and look at the specifications of your PC to see what BIOS you have

  Then read this on the 'beep' error codes to try to see what failed:

  http://www.computerhope.com/beep.htm

  http://www.pchell.com/hardware/beepcodes.shtml

  http://pcsupport.about.com/od/nonworkingcomponent/HT/beepcodestb.htm

  If you are unable to determine the hardware problem yourself, contact the manufacturer if under warranty.

  If it is not under warranty, find a good repair shop premises to take.

  Here are the Codes of BIOS "beep" for an HP machine and the reasons why:

  "BIOS Beep Codes.

  http://h10010.www1.HP.com/ewfrf/wc/document?DocName=c02222922&cc=us&destPage=document&LC=en&tmp_docname=c02222922

  See you soon.

• When we turn the or after mode 'sleep' my motherboard will load but then nothing else... White screen. If I reboot and select Safe mode it loads. If I reboot in safe mode then everything works. Windows loads, everything works.

  When I turn on my PC or after mode 'sleep' my motherboard will load but then nothing else... White screen.  If I reboot and select Safe mode it loads. If I reboot in safe mode then everything works. Windows loads, everything works.

  I have this pc for 3 years.  My system was full of unused and unwanted programs, so I rebooted to Vista, deletted all my old files that Vista had moved into the "old." This is when I started having this disorder.

  (I made this process more yet to see if it would help with no luck)

  My first thoughts were video driver... downloaded the new drivers 3 times.  scanned all the other drivers for updates ect. nothing seems to help...

  Anyone have any ideas?

  Thank you

  Dave

  I have

  I was able to download these files.  Rthl64.sys point - one component of your network cable in pictures device driver memory.  Interestingly, the dates of the 2006 pilot (Rtlh64.sys my Sep 26 07:20:23 2006 (45190CF7)), so it's most likely your problem.  Follow these steps:

  -Download a new copy of the software/drivers on the website of Realtek here: http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=7&PFid=10&Level=3&Conn=2

  -Uninstall the current software/drivers on your system

  -Install the newly downloaded drivers

  -Monitor for more BSOD

  Here is a summary of the BSOD:

  BSOD BUGCHECK SUMMARY

  By: 6002.18267.amd64fre.vistasp2_gdr.100608 - 0458
  The debugging session: 16:23:07.947 Sun 31 Oct 2010 (UTC - 05:00)
  System Uptime: 0 days 13:18:38.380
  WARNING: Unable to verify timestamp for Rtlh64.sys
  ERROR: Module load completed but symbols can be loaded for Rtlh64.sys
  Probably caused by: Rtlh64.sys
  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  BUGCHECK_STR: 0X9F
  Nom_processus: System
  Code 0000009F error checking
  Fffffa80 00000000 00000003' arguments'03de3a30 fffffa80 '05bf1050 fffffa80' 072dc010
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  By: 6002.18267.amd64fre.vistasp2_gdr.100608 - 0458
  The debugging session: 22:49:49.007 sat 30 Oct 2010 (UTC - 05:00)
  System Uptime: 0 days 5:12:31.440
  WARNING: Unable to verify timestamp for Rtlh64.sys
  ERROR: Module load completed but symbols can be loaded for Rtlh64.sys
  Probably caused by: Rtlh64.sys
  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  BUGCHECK_STR: 0X9F
  Nom_processus: System
  Code 0000009F error checking
  Fffffa80 00000000 00000003' arguments'03def060 fffffa80 '05bdf050 fffffa80' 04aeb2d0
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  By: 6001.18000.amd64fre.longhorn_rtm.080118 - 1840
  The debugging session: 21:48:58.144 Wed Oct 27 2010 (UTC - 05:00)
  System Uptime: 0 days 9:49:32.487
  WARNING: Unable to verify timestamp for Rtlh64.sys
  ERROR: Module load completed but symbols can be loaded for Rtlh64.sys
  Probably caused by: Rtlh64.sys
  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  BUGCHECK_STR: 0X9F
  Nom_processus: System
  Code 0000009F error checking
  Fffffa80 00000000 00000003' arguments'03a1ca30 fffffa80 '05-99050 fffffa80' 039c8c60
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``

  -John ( http://www.carrona.org/index.html )

• Random buttons and now the screen is tense! Help!

  Help, please!  One of my friends thought he was being funny keys at random, multiple at once, when I told him not to do so.  He pushed the buttons especially on the right side and part of the middle.  I don't know if it was a specific button or a little push at the same time that caused my screen to go wide.  Now, the screen looks stretched.  There is nothing in the settings, I found that it will change back and I don't know exactly what buttons were pushed to get there.  I really need help.  I'm horrible with computers and nothing on the web has been able to help me, YET!  I hope that someone out there knows the answer or is willing to help me understand.

  Wednesday, January 21, 2015 23:12:23 + 0000, DesperateForComputerHelp wrote:

  Help, please!  One of my friends thought he was being funny keys at random, multiple at once, when I told him not to do so.  He pushed the buttons especially on the right side and part of the middle.  I don't know if it was a specific button or a little push at the same time that caused my screen to go wide.  Now, the screen looks stretched.  There is nothing in the settings, I found that it will change back and I don't know exactly what buttons were pushed to get there.  I really need help.  I'm horrible with computers and nothing on the web has been able to help me, YET!  I hope that someone out there knows the answer or is willing to help me understand.

  Right-click on the desktop and choose screen resolution. Choose it
  the default for your screen, as resolution its documentation says you.

  And don't let ever your 'friend' near your computer again.

• HP m9500z is crushed, able to reboot and restore, now no start HP screen, just hangs

  HP m9500z is crushed, able to reboot and restore, now no start HP screen, just hangs. After disconnecting the power for several hours, I was able to get the system running, ran scans disk for errors, no problem.  a few minutes after vista is that it crashed again.  When you restart the fans launched full speed, no start hp at the start screen, nothing.  I tried to reset the CMOS using the jumper trick, nothing.  removed the battery, nothing.  I even tried the blind stuff, I have seen suggested, as pressing F10 for 8 seconds, etc..  during one of the last times before that it's totally off I ran the diagnostic of the system BIOS, everything was fine.  I think I have a corrupted bios.  Any ideas? Could be a motherboard fried, but I hope that its not so bad.  Product num nh836av-aba.

  From your description, I would unplug the video card and the video shipped by train.  The specifications of your mb should be these: http://support.hp.com/us-en/document/c01635688

  Please make sure you have an esd protection and immerse in your unit without first physically disconnect power to the wall outlet