Primary DG not sending arc in standby mode

Similar Questions

• Toshiba 32LV933G does not start - only in standby mode

  I'm looking for a dump of memory (SPI Winbond 25Q64FVSIG U7).
  TV all the time on standby and will not start.

  Try to disconnect all the cables and remove it from the socket.
  Wait a while, and then connect it again in power.
  In case this is not enough, you need to contact a technician to check the hardware of televisions. I hope that the warranty is still valid

• A satellite series will not automatically enter hibernation/standby mode

  This feature to work on my laptop, but at the time (maybe 6 months), he started this problem. I don't remember any significant incident they coincide at the beginning of this problem. The computer will enter either of these modes and works fine if I manually turn them, but I can't put it so that they enter these modes automatically after a period of time. I tried to change controls for both the Toshiba utility and Panel options screensaver standard windows, but neither worked for a while. Any ideas?

  An application may be preventing the laptop to enter the Hibernate?

  I remember that PowerDVD did this on my laptop, so close all applications you can, then try again.

  If you have no luck, you may need to run the recovery to reinstall Windows.

  Also try a BIOS update.

• Added tablespace in the primary but not reflective mode standby

  Hello

  We have databases main and backup(Oracle 11 g R2) with "STANDBY_FILE_MANAGMENT", set to AUTO.

  However, the tablespace is not is created automatically standby if we add one in elementary school.

  What could be the reason? How to solve this?

  Thank you

  RH_DBA

  If STANDBY_FILE_MANAGMENT' set to AUTO, then it should create a file of data in standby mode - have you seen a mistake in the alerts log.. ?

  Also check the process of recovery on dataguard

  What you got for the below... ?

  Select the sequence #, process, status from v$ managed_standby;

  If already datafile is already added in the primary and not added to sleep then goes down with method

  1. stop the recovery

  2 alter system set STANDBY_FILE_MANAGEMENT = MANUAL;

  3 alter database create datafile...

  4 alter system set STANDBY_FILE_MANAGEMENT = AUTO;

  5 restart the recovery

• DataGuard - primary not applying not newspapers in standby mode

  Having a problem applying newspapers of the day before, apparently is not setup correctly. I'm sure I'm missing something simple here, but would like any encoding or help. Thanks in advance.
  
  Background:
  
  Primary: CDPMTSB (Single Stand alone)
  Standby: CDPMT (RAC)
  
  Error message on primary (Journal of alerts):
  
  Errors in the /data/oracle/app/oracle/diag/rdbms/cdpmtsb/CDPMTSB/trace/CDPMTSB_arc6_9571.trc file:
  ORA-16014: 3 log sequence # 4071 not archived, no available destinations
  ORA-00312: threads of 3 2 online newspaper: "+ FRA_DG_01/cdpmtsb/onlinelog/group_3.291.799379949".
  ARCH: Archiving error occurred on a closed thread. Continuous archiver
  CDPMTSB ORACLE instance - error check-in. Continuous archiver.
  Mon 19 Nov 19:54:24 2012
  Changing destination 4 remotely at the local level during the journal archives #: sequence 3 #: 4071 thread #: 2
  Changing destination 4 remotely at the local level during the journal archives #: sequence 3 #: 4071 thread #: 2
  ARC6: LGWR is actively archiving destination LOG_ARCHIVE_DEST_2
  ARC6: Journal of archiving rejected (thread 2 sequence 4071) to the host 'CDPMT '.
  Errors in the /data/oracle/app/oracle/diag/rdbms/cdpmtsb/CDPMTSB/trace/CDPMTSB_arc6_9571.trc file:
  ORA-16401: archivelog rejected by RFS
  Errors in the /data/oracle/app/oracle/diag/rdbms/cdpmtsb/CDPMTSB/trace/CDPMTSB_arc6_9571.trc file:
  ORA-16014: 3 log sequence # 4071 not archived, no available destinations
  ORA-00312: threads of 3 2 online newspaper: "+ FRA_DG_01/cdpmtsb/onlinelog/group_3.291.799379949".
  ARCH: Archiving error occurred on a closed thread. Continuous archiver
  CDPMTSB ORACLE instance - error check-in. Continuous archiver.
  Mon 19 Nov 19:59:24 2012
  Changing destination 4 remotely at the local level during the journal archives #: sequence 3 #: 4071 thread #: 2
  Changing destination 4 remotely at the local level during the journal archives #: sequence 3 #: 4071 thread #: 2
  ARC6: LGWR is actively archiving destination LOG_ARCHIVE_DEST_2
  ARC6: Journal of archiving rejected (thread 2 sequence 4071) to the host 'CDPMT '.
  Errors in the /data/oracle/app/oracle/diag/rdbms/cdpmtsb/CDPMTSB/trace/CDPMTSB_arc6_9571.trc file:
  ORA-16401: archivelog rejected by RFS
  Errors in the /data/oracle/app/oracle/diag/rdbms/cdpmtsb/CDPMTSB/trace/CDPMTSB_arc6_9571.trc file:
  ORA-16014: 3 log sequence # 4071 not archived, no available destinations
  ORA-00312: threads of 3 2 online newspaper: "+ FRA_DG_01/cdpmtsb/onlinelog/group_3.291.799379949".
  ARCH: Archiving error occurred on a closed thread. Continuous archiver
  CDPMTSB ORACLE instance - error check-in. Continuous archiver.
  Mon 19 Nov 20:00 2012
  Errors in the /data/oracle/app/oracle/diag/rdbms/cdpmtsb/CDPMTSB/trace/CDPMTSB_j001_17473.trc file:
  ORA-12012: error on auto work 72620
  ORA-06502: PL/SQL: digital or value error: character of number conversion error
  ORA-06512: at "CD_ADMIN. UTDCD_SURVEY_PKG", line 4926
  
  Journal Alerts in mode ensures:
  
  ORA-16401: archivelog rejected by RFS
  Mon 19 Nov 19:32:15 2012
  RFS [6]: assigned to the RFS 4248 process
  RFS [6]: identified the type of database such as 'physical' standby: customer is ARCH pid 9561
  Mon 19 Nov 19:32:22 2012
  RFS [1]: Journal selected 6 for thread 1 sequence 4073 dbid 1629723947 branch of the 769881773
  Mon 19 Nov 19:32:22 2012
  Archived journal 1097 extra for each sequence 1-4072 0x62e7f5cf dest ID thread entry 1:
  Archived journal 1098 extra for each sequence 1-4072 0x62e7f5cf dest ID thread entry 3:
  Mon 19 Nov 19:34:23 2012
  Errors in the /opt/app/oracle/diag/rdbms/cdpmt/CDPMT1/trace/CDPMT1_rfs_24994.trc file:
  ORA-16401: archivelog rejected by RFS
  Mon 19 Nov 19:38:12 2012
  RFS [1]: Journal selected 5 for thread 1 sequence 4074 dbid 1629723947 branch of the 769881773
  Mon 19 Nov 19:38:12 2012
  Archived journal 1099 extra for each sequence 1-4073 0x62e7f5cf dest ID thread entry 1:
  Archived journal 1100 extra for each sequence 1-4073 0x62e7f5cf dest ID thread entry 3:
  Mon 19 Nov 19:39:23 2012
  Errors in the /opt/app/oracle/diag/rdbms/cdpmt/CDPMT1/trace/CDPMT1_rfs_24994.trc file:
  ORA-16401: archivelog rejected by RFS
  Mon 19 Nov 19:44:24 2012
  Errors in the /opt/app/oracle/diag/rdbms/cdpmt/CDPMT1/trace/CDPMT1_rfs_24994.trc file:
  ORA-16401: archivelog rejected by RFS
  Mon 19 Nov 19:49:24 2012
  Errors in the /opt/app/oracle/diag/rdbms/cdpmt/CDPMT1/trace/CDPMT1_rfs_24994.trc file:
  ORA-16401: archivelog rejected by RFS
  Mon 19 Nov 19:54:24 2012
  Errors in the /opt/app/oracle/diag/rdbms/cdpmt/CDPMT1/trace/CDPMT1_rfs_24994.trc file:
  ORA-16401: archivelog rejected by RFS
  Mon 19 Nov 19:59:24 2012
  Errors in the /opt/app/oracle/diag/rdbms/cdpmt/CDPMT1/trace/CDPMT1_rfs_24994.trc file:
  ORA-16401: archivelog rejected by RFS
  
  
  Primary parameters:
  
  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  log_archive_config string DG_CONFIG = (CDPMT, CDPMTSB)
  Log_archive_dest chain
  Log_archive_dest_1 string LOCATION = USE_DB_RECOVERY_FILE_
  DEST = (ONLINE_LOGFIL VALID_FOR
  ES, ALL_ROLES) DB_UNIQUE_NAME = C
  DPMTSB
  LOG_ARCHIVE_DEST_10 string
  LOG_ARCHIVE_DEST_2 SERVICE string = CDPMT VALID_FOR = (ONLIN
  E_LOGFILES, PRIMARY_ROLE) DB_UN
  IQUE_NAME = CDPMT
  location of string log_archive_dest_3 = "+ FRA_DG_01/cdpmtsb/s".
  tandbylog', valid_for is (STANDB
  Y_LOGFILE, STANDBY_ROLE)
  log_archive_dest_4 string
  log_archive_dest_5 string
  log_archive_dest_6 string
  log_archive_dest_7 string
  log_archive_dest_8 string
  log_archive_dest_9 string
  allow the chain of log_archive_dest_state_1
  allow the chain of log_archive_dest_state_10
  LOG_ARCHIVE_DEST_STATE_2 string ENABLE
  log_archive_dest_state_3 string ENABLE
  Reporter of the log_archive_dest_state_4 chain
  allow the chain of log_archive_dest_state_5
  allow the chain of log_archive_dest_state_6
  allow the chain of log_archive_dest_state_7
  allow the chain of log_archive_dest_state_8
  allow the chain of log_archive_dest_state_9
  log_archive_duplex_dest string
  log_archive_format string %t_%s_%r.dbf
  log_archive_local_first Boolean TRUE
  log_archive_max_processes integer 7
  log_archive_min_succeed_dest integer 2
  log_archive_start boolean FALSE
  log_archive_trace integer 0
  
  
  
  Sleep settings:
  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------- -----------
  log_archive_config string dg_config = (CDPMT, CD PMTSB)
  Log_archive_dest chain
  location of string Log_archive_dest_1 = USE_DB_RE COVERY_FILE «»
  Dest", valid_for is (ALL_LOGFIL
  ES, ALL_ROLES)
  LOG_ARCHIVE_DEST_10 string
  chain of LOG_ARCHIVE_DEST_2 SERVICE = cdpmtsb LGW R ASYNC VAL
  ID_FOR = (ONLINE_LOGF ISLANDS, PRIMAR
  SOUL DB_UNIQUE_N Y_ROLE) = cdpmtsb
  log_archive_dest_3 string LOCATION = + FRA_DG_01/CDPMT/STAN
  DBYLOG VALID_FOR = (STANDBY_LOG
  
  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------- -----------
  FILES, STANDBY_ROLE) DB_UNIQUE_
  NAME = CDPMT
  log_archive_dest_4 string
  log_archive_dest_5 string
  log_archive_dest_6 string
  log_archive_dest_7 string
  log_archive_dest_8 string
  log_archive_dest_9 string
  log_archive_dest_state_1 string ENABLE
  allow the chain of log_archive_dest_state_10
  LOG_ARCHIVE_DEST_STATE_2 string ENABLE
  
  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------- -----------
  allow the chain of log_archive_dest_state_3
  allow the chain of log_archive_dest_state_4
  allow the chain of log_archive_dest_state_5
  allow the chain of log_archive_dest_state_6
  allow the chain of log_archive_dest_state_7
  allow the chain of log_archive_dest_state_8
  allow the chain of log_archive_dest_state_9
  log_archive_duplex_dest string
  log_archive_format string %t_%s_%r.dbf
  log_archive_local_first Boolean TRUE
  log_archive_max_processes integer 30
  
  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------- -----------
  log_archive_min_succeed_dest integer 1
  log_archive_start boolean FALSE
  log_archive_trace integer 0
  SQL > show parameter log_ar
  
  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  log_archive_config string dg_config = (CDPMT, CDPMTSB)
  Log_archive_dest chain
  location of string Log_archive_dest_1 = 'USE_DB_RECOVERY_FILE. '
  Dest", valid_for is (ALL_LOGFIL
  ES, ALL_ROLES)
  LOG_ARCHIVE_DEST_10 string
  chain of LOG_ARCHIVE_DEST_2 SERVICE = cdpmtsb LGWR ASYNC VAL
  ID_FOR = (ONLINE_LOGFILES, PRIMAR
  DB_UNIQUE_NAME Y_ROLE) = cdpmtsb
  log_archive_dest_3 string LOCATION = + FRA_DG_01/CDPMT/STAN
  DBYLOG VALID_FOR = (STANDBY_LOG
  
  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  FILES, STANDBY_ROLE) DB_UNIQUE_
  NAME = CDPMT
  log_archive_dest_4 string
  log_archive_dest_5 string
  log_archive_dest_6 string
  log_archive_dest_7 string
  log_archive_dest_8 string
  log_archive_dest_9 string
  log_archive_dest_state_1 string ENABLE
  allow the chain of log_archive_dest_state_10
  LOG_ARCHIVE_DEST_STATE_2 string ENABLE
  
  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  allow the chain of log_archive_dest_state_3
  allow the chain of log_archive_dest_state_4
  allow the chain of log_archive_dest_state_5
  allow the chain of log_archive_dest_state_6
  allow the chain of log_archive_dest_state_7
  allow the chain of log_archive_dest_state_8
  allow the chain of log_archive_dest_state_9
  log_archive_duplex_dest string
  log_archive_format string %t_%s_%r.dbf
  log_archive_local_first Boolean TRUE
  log_archive_max_processes integer 30
  
  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  log_archive_min_succeed_dest integer 1
  log_archive_start boolean FALSE
  log_archive_trace integer 0
  SQL >
  
  
  DGMGRL > show configuration detailed;
  
  Configuration
  Name: cdpmtqa
  Activated: YES
  Protection mode: MaxPerformance
  Databases:
  cdpmtsb - primary database
  cdpmt - physical of the standby database
  
  Fast-Start Failover: DISABLED
  
  Current situation for 'cdpmtqa ':
  WARNING: ORA-16608: one or more databases have warnings
  
  
  DGMGRL > show verbose CDPMT databases
  
  Database
  Name: cdpmt
  Role: STANDBY PHYSICS
  Activated: YES
  State of destination: apply
  Occurrence (s):
  CDPMT1
  CDPMT2 (apply the instance)
  
  Properties:
  DGConnectIdentifier = "cdpmt".
  ObserverConnectIdentifier = "
  LogXptMode = "ASYNC".
  DelayMins = '0'
  Binding = "OPTIONAL."
  MaxFailure = '0'
  MaxConnections = '1'
  ReopenSecs = "300"
  NetTimeout = "30"
  RedoCompression = "DISABLE."
  LogShipping = 'ON '.
  PreferredApplyInstance = "
  ApplyInstanceTimeout = '0'
  ApplyParallel = 'AUTO '.
  StandbyFileManagement = 'AUTO '.
  ArchiveLagTarget = '0'
  LogArchiveMaxProcesses = "4"
  LogArchiveMinSucceedDest = '1'
  DbFileNameConvert = "
  LogFileNameConvert = "
  FastStartFailoverTarget = "
  StatusReport = "(monitor).
  InconsistentProperties = "(monitor).
  InconsistentLogXptProps = "(monitor).
  SendQEntries = "(monitor).
  LogXptStatus = "(monitor).
  RecvQEntries = "(monitor).
  HostName (*)
  SidName (*)
  StaticConnectIdentifier (*)
  StandbyArchiveLocation (*)
  AlternateLocation (*)
  LogArchiveTrace (*)
  LogArchiveFormat (*)
  LatestLog (*)
  TopWaitEvents (*)
  (*) - Please check the specific instance to the value of the property
  
  Current situation for 'cdpmt ':
  WARNING: ORA-16809: several warnings detected for the database
  
  
  Any help would be really appreciated. Thank you!
  
  Published by: 972075 on November 19, 2012 15:09

  Hello;

  Given your combination of errors I could watch this:

  Creation of archive Log fails with error ORA-16014, ORA-00312 [ID 1373314.1]

  Assuming you are using FRA I would check its location:

  SQL > show parameter db_recovery

  If I remember well by default DGMGRL takes destination archive as FRA.

  Use the commands below to each place to check if the parameters change.

  DGMGRL > see the database CDPMTSB logxptstatus;
  DGMGRL > see THE base of DATA CDPMTSB InconsistentProperties;
  DGMGRL > see the CDPMTSB InconsistentLogXptProps database;

  DGMGRL > see the database CDPMT logxptstatus;
  DGMGRL > see THE base of DATA CDPMT InconsistentProperties;
  DGMGRL > see the CDPMT InconsistentLogXptProps database;

  Best regards

  mseberg

• Tablespace Temp created primary not replicated to standby mode

  Hello
  
  I configured Oracle 9i data guard recently, while doing, that I was forced to restructure primary db since maxlog files was 5, so I used backup controlfile to trace and changed the maxlogfiles to 6 and then transported the remaining steps. While I was using the trace file and restructuring of the Db, I did not notice that I missed to add the temporary file and moving it in standby mode. Yest.Day once get a team request error, that I created a new tablespace temp and logs switch made, however this tablespace temp tempfile was not copied to the standby server. Does this cause anything serious or can I do now to copy it in standby? Only the manual copy with primary db shutdown or any other means?

  standby
  SQL > SELECT NAME FROM V$ TEMPFILE;

  no selected line

  Use the commands below

  SQL > alter tablespace add tempfile ' D:\ORACLE\ORADATA\CTSOC\TEMPNEW01. DBF' size 31457280;

  If you take controlfile trace (or) metadata, you can see command DDL that too.
  Thank you.

• Archivelogs not transforing in standby mode

  Hello
  
  In dataguard parameter are configured in
  
  primary database to transfer the archivelogs as log_archive_dest_2 ='service = to_orcl
  
  and standby_file_management = auto and also created the directory structure.
  
  side database pending: standby_archive_dest = ' / u01/app/oracle/arch/orcl.
  
  
  Earphone works and also works in the tnsnames.
  
  But archivelogs transform not Eve elementary school.
  
  can you please let me know why it is like that.
  
  Thank you very much

  Vinciane wrote:
  LOG_ARCHIVE_DEST_STATE_2 = enable and log_archive_dest_2 = 'service = to_orcl'

  as this set of parameters.

  Two points must be considered in when it comes to Archives of newspapers are not shipped to standby mode:

  1. it should be:
  LOG_ARCHIVE_DEST_2 = SERVICE = MARKTEST LGWR ASYNC
  VALID_FOR = (ONLINE_LOGFILES, PRIMARY_ROLE)

  2 are you able to conn sys/pwd@stby as sysdba, if yes, it means that there are no connectivity issues; If not, this is the reason that's why newspapers are not shipped to the backup site. It is due to number with password file or something with the name of the service. Just drop it and create a new/freshpassword with the same password for both primary and standby.

  3. check if your OS username part of the ORA_DBA group.

  Concerning
  Girish Sharma

• So, if your primary is not in mode FORCE_LOGGING...

  I just noticed one of our 11.1.0.7 DBs is not in FORCE_LOGGING mode on the primary.
  
  I know the app well and she never made basic SQL without SQL * Loader, INSERT with hint, append, etc..
  
  But it made me wonder... What is the effect, if you have a physical standby DataGuard and its primary is not in FORCE_LOGGING mode and someone performs a NOLOGGING operation?
  
  There is no recovery to apply on the day before. Let's say that someone adds a table the result of an operation NOLOGGING 100 blocks. Some time on the road, they are updating some of these blocks - the standby would not be able to treat it, right? I'm curious to know what's happening or what's the practical effect.
  
  I know that the DG manual said primary shall be in FORCE_LOGGING mode.

  Dear Raindog,

  First of all, please read the following thread.

  Why FORCE_LOGGING?

  The Oracle Data Guard will not give you an error that your database is not synchronized in the alert.log file, but in reality your databases are not the same level when you talk about "synchronization."

  The FORCE_LOGGING option will force all databases to record actions in the redo log. You can either force the tablespaces to be registered or any base. In other words, you must have created the configuration of protection of data with the option FORCE_LOGGING is enabled. Just a little tip, FORCE_LOGGING was released in version 9iR2.

  Kind regards.

  Ogan

• Model # 860-180 st: computer will not go to standby mode

  I just got this computer HP, model # 860-180 st, not even a month, "sleep" mode was working fine when I got it, but now it will not enter sleep mode. I checked everything in Control Panel, power options, so I don't know what the problem is. People of the idea?

  Jay_101 wrote:
  

  Greetings,

  Also check out tips found on thissite. She aims to win 8.1 but will also help to win 10.

  First generate a report of power. This will tell you which prevents the day before.

  See you soon!

  Hello Jay_101,

  Thanks for the link, I found what was preventing the computer in standby mode. It was the srvnet thing.  This link has all the tips and trick to solve this problem.

  I owe you a lunch.

  I contacted the HP Support by phone, the call is routed to the India, where else? The guy wanted remote access to my computer, I said no way Jose. These types of support for HP in India are unnecessary. All he wanted was Remoting to my computer, since I refused he won't talk to me more.

• Satellite Pro L10 does not go on standby mode

  After a virus and reinstall all my programs and drivers etc, my computer won't now, go in standby mode.
  When you go to "turn off computer" option ensures their but is grayed out and you can not click on it.
  Power options in my Control Panel on them is not an option to set the day before to the top.

  Can anyone help?

  Hello

  In my view, a Toshiba Power Saver must be preinstalled and there you should be able to enable or disable the standby or hibernation mode.

  Check it!

• PC does not go on standby mode

  Hello

  I have a strange problem with my Pavilion (Vista 64 bit): it just won't go/stay in stand-by mode.

  Whenever I go through start panel into position mode it seems to go through the process of orders-by only're - wake up' the very next second pressing strongly it's fans and check the dvd player (no matter if there is a CD-ROM/dvd-rom in it or not).

  Same thing happens whenever I'm away from the PC long enough for him to enter standby mode automatically. He tries to stand by again after a certain period of time without ever stay in stand-by.

  I had the problem since I bought the PC a few months - but having already had to return to the first person that I bought right away I didn't go through the hazzle and take the second return - once again.

  Thank you very much in advance for your help!

  Sorry for the late reply.

  The question that you mentioned usually caused if the network adapter is set to wake the computer from sleep. If you are usign an always on Internet connection then there will be a constant activity in the network card and it wakes you up the PC as soon as you put in mode 'sleep'.

  Please, check the following and verify that the settings are correct.

  -Press the Windows logo and the R button to open the control box run.

  -Type devmgmt.msc, and then click OK.

  -It will open up the Device Manager.

  -Click on + sign next to network card and right click on the name of the adapter listed.

  -Select properties, then click the power management tab.

  -If the option "Allow this device to wake up the PC" is checked, uncheck the box that and click Ok.

  Try to put the PC to sleep/wake and check if it is in "standby mode".

  I would like to know if the procedure worked. Give Kudos if it works.

• X120e bad DIMM location. System does not return from standby mode

  Hello. I have a X120e running Windows 8.1 Pro x 64.

  I just put the unit to 4 GB of ram (2 x 2) of 2 GB (1 x 2). Whenever the upper DIMM Slot is used, the system will not leave standby mode and all power, including the battery must be removed from the system so that it works normally again.

  Of interest, all the ram tested with Memtest86 +.

  If it's important the system has the e350 CPU and a 320 GB HARD drive.

  Let me know if you have any input.

  Thank you!

  Update: I've updated the BIOS from 1.16 to 1.17. The system now between and leave pending normally as it should, with the two occupied ram slots.

  Of interest, none of the BIOS settings changed after the update.

• Computer will not remain in standby mode.

  I have a computer with Windows XP, about 5 years old who often will not remain in standby mode. After 30-45 seconds it starts again and the display shows again the office.

  Does anyone have a suggestion/recommendation what to do about it?

  Thanks, any suggestions would be appreciated.

  Hello JJLinker, welcome.

  The issue is likely caused by "Wake by " settings in your power options. This gives a shot:

  1. click on START
  2. right click "My computer" and select "Properties".
  "3. click on the tab"Hardware", then select Device Manager.
  4. expand the "Network adapters" category
  5. right click on each of the devices and select "Properties".
  6. on each, go to the tab "power management."
  7 turn off the checkbox "allow this device to wake...". ' and click on 'Ok '.
  8. close all windows and restart the computer

  Let us know what happens

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When the computer remains in standby mode it will not start normally, usually ok in safe mode, but even when its up and running normally it's extremely slow.

  Original title: searchfilterhost problems

  I am running Vista family 32-bit and when the computer is left in standby mode, that it does not start normally, usually ok in mode without failure, but even if his place and it works normally is extremely slow. Having verified the use of the processor, 82 processes running anything meaningful except 50 + % is used by searchfilterhost.exe, this would cause the problem and if so how it can be cured.

  Hi Brian,.

  You have made any changes to your computer recently?

  I suggest you to follow the steps and check if it helps.

  Method 1: Follow the link and check if that helps.
  The problems of wake the computer from sleep mode

  Method 2: You can also follow the link and check if it helps.
  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista

  Method 3: Search for viruses using the Microsoft Safety Scanner and check if that helps.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 4: You can also check out the link and check if it helps.

  Ways to improve your computer's performance

  How to make a computer faster: 6 ways to speed up your PC
   

• PowerEdge T410 error: POWER: not available in standby mode

  Good afternoon!

  Has anyone caught the error described below with a PowerEdge T410?

  POWER: not available in standby mode

  Power: Off

  During this operation you tried these steps on both power supplies separately? If yes then it seems that the motherboard may have a problem.