"Print cartridge failed" message on HP C5550 after installation of Mac Snow Leopard

Similar Questions

• 'All settings' menu inactive/gray on HPC5550 after upgrade Mac Snow Leopard

  I've just updated for Mac OS X 10.5.8 to 10.6.7 and cannot print.  I get "Printer cartridge failure" messages whenever I try to print.  I only use the black ink cartridge and let the empty color cartridge slot, which never seemed a question before.

  If you are using snow leopard and have the HP software before Snow Leopard (either from a CD not marked as compatible with 10.6 or you recently upgraded to Snow Leopard and had the software HP on your Mac before you upgrade - even if you made a standard from the old software uninstaller or installed new software on top of it) , you must uninstall the software using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall< scrubber="">
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Now run a software update.

  Finally, download and install the "Full Featured" driver and software from the "Support & drivers" link at the top of this page.

• Incompatible print cartridge error message

  Below you can find a video on setting a cartridge print Incompatible error message in an Officejet J4680 printer. The steps it will show you how to do the following procedures.

  1. Remove and inspect the cartridges

  2. how to clean cartridges and what materials to use for this process.

  3. replace the cartridge

  4. printing in the mode back.

  The stages of care cartridge will work on all printers that have the HPI cartridges.  IPH cartridges are those who come in all black and tri-color and have no individual cyan, magenta, and yellow colors. This is also true when the video talking about printing in backup mode as some printers with cartridges IPH are able to print in rescue mode when a cartridge is missing from the printer.

  I hope the community finds this video to be useful.

• I need to reinstall my Linux Mint, therfore also Thunderbird. How can I save the addresses and all my messages (copy and again after installation Thunderbird)

  I need to reinstall my Linux Mint 17 companion, therfore also Thunderbird. How can I save the addresses and all my messages (copy and again after Thunderbird installation)?

  You will need to backup your Thunderbird profile.
  _ http://KB.mozillazine.org/Thunderbird: _FAQs_:_Backing_Up_and_Restoring #Manually_back_up_the_profile

• OfficeJet Pro 8000 - is no longer prints borderless print after upgrade - Tiger for the Mac Snow Leopard

  Mac OS X 10.6.8

  HP Officejet pro 8000 A809

  Wireless

  HP Photosmart Studio v. 9.7.4

  After upgrading from Tiger to Snow Leopard I lost the ability to print without MARGINS - until that time, that I had no problem.

  I use HP Photosmart Studio to print, but get the same error every time: "the selected printer supports the paperwork without borders. If you print, will serve the maximum printable area of the current paper size.

  I downloaded the most current driver after that I improved and I was able to print in general - when I try to select borderless printing it tells me that this printer does not support. I was able to print without margins using Creative Suite Indesign and printing of this app--but have lost the functionality of the HP Photosmart Studio is really a drag - since I have to do all sorts of adjustments to do workaround printing.

  Is it possible to upgrade Photosmart Studio? or re-start it? I'm lost and need help.

  Thank you

  If you always reminants of the HP software meant for 10.4, you must uninstall the software by using the "scrubber".  If you have already uninstalled, reinstall from the CD, then:

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall< scrubber="">
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Now run a software update.

  Finally, download and install the "Full Featured" driver and software from the "Support & drivers" link at the top of this page.

• The editor does not open after 11 items is transferred from Mac Snow Leopard OS 10.10.2 Yosemite

  I've been running Photoshop elements on a Mac with OS 10.6.8 11 (Snow Leopard). I just got a new Mac with the latest OS X (OS 10.10.2,"limited Yosemite). I transferred all my files on the new computer using the Migration Wizard.

  PES 11 seems to install properly and the organizer opens OK, except that I get a message saying "some online services are not available" and her asking if I want to continue without them. However when I try to open the editor it opens, instead I get two error messages, first "among application components are missing from the Application directory, please reinstall the application", then "a required application library failed to open and the product cannot continue. Please reinstall the application '.

  My questions are - should I just do a reinstall from the original disk? If so, should I do a complete uninstall of 11 items first? If I do a reinstall, will I lose all the changes, the version sets or something else?

  I had said that I should be able to simply transfer via the PES 11, with the original product key only. Will there be incompatibilities between 11 PES and the latest version of Yosemite?

  Thanks for any guidance,

  Nick

  You can never, never, never transfer any installed version of the EP on any platform. You should always install from scratch on a new machine. Trying to to, you have made more work for yourself. You must download and run this:

  Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

  that won't seem to do anything, but is a necessary step to break the links within the program. Then you can go to and manually remove everything related to the PSE that you can find, not only Applications, but also your username > library > Preferences and the library at the top level of your hard drive > application support > adobe. You go to these places manually; Spotlight will not help you with this type of research.

  Then, you can reinstall your original media or from the download here:

  Download Photoshop Elements products | 10, 11, 12, 13

• HP officejet 7580 print cartridge error message

  I have a HP officejet printer 7580 all-in-one with the error message "the following ink cartridges appear to be missing or damaged. Magenta (M) "I followed the instructions on the HP site troubleshooting, first changing the magenta cartridge, clean the electrical contacts on the print head, then replace the printhead and I still get the same error message.» I then removed the cartridge yellow and still only had the same error message about the magenta cartridge, even after restarting the printer. In my view, that it must be a problem with the software or the chip of the computer on the printer itself. Someone at - it suggestions for me?

  Looks like you did a lot of troubleshooting for the cartridge error number.  The areas of print head and cartridge are separated in the OJ series L7580 printer, so the effect print head not this error.  The error comes from the electrical contact with the cartridge in question, appears magenta of the post.

  Follow the steps described in the document, found here, to solve the problem and determine if the error comes from the cartridge or the electrical system internal printer.

  I hope this helps.

• HP Deskjet D1320 align the print cartridges fail

  Hello

  So I recently broke my printer to work on a couple projects.  The old cartridges is dead, so I bought brand new and installed today.  When installing the latest software of HP printer, the alignment will fail.  Step by step:

  (1) Center of Solutions HP Open

  (2) open Toolbox

  (3) device Services tab

  (4) align the ink cartridges

  (5) align the

  However, after click on align, * nothing *.  It's as if the part of the alignment of the software was not installed.  I * can print * very well, but alignment doesn't matter.   I can also print a page of test very well.

  I also did the standard troubleshooting: remove and reinstall the cartridges, restart the printer, unplug the printer, reinstall the software.  * Nothing works.* again, it is as if the part of the alignment of the software was not installed.

  So what can I do to solve the problem of alignment?

  Thank you

  Drogan

  PS OS: Windows 7 Ultimate 64 bit SP1.  Connection: USB

  You are right.  It's a good general practice to align the printer when new cartridges are installed, but it is not mandatory.  Alignment is made for purposes of printing quality.  On this printer, the print head is part of the ink cartridge.  When a new cartridge is seated, it may or may not be in alignment.  It looks like your cartridges are in alignment.

  You could try to shut down your computer (not a reset) and do a Hard Reset of the printer as described in the following link.  Click here  After you restart the computer, is there a difference?

  If not, and the print quality is good, I recommend you skip the alignment.  If you want to be able to make an adjustment, you could try to do a complete uninstall of the printer software and download and install the drivers from hp.com.  Click here

• Remove and check color HP PSC 1610 printer cartridge error message.

  Original title: remove and check color cartridge

  My printer HP PSC 1610 rpet 'Remove and check color cartridge'. After that, I press 'ok' and the message still appears. What is the problem with the printer? Thank you.

  Hey cobra10,

  Fortunately, there is an article by HP Knowledge Base that talks about this problem. Please follow the solution provided in the article below to solve the problem.

  Remove it and check [color / black / photo] error message appears on the screen of control of product and the product does not print.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The HP printer cartridge error message

  When I try to replace an ink cartridge in my printer Officejet 6500 wireless, I keep getitng an error message that the cartridge is damaged or missing. I tried another insering and got the exact same message. I can't get my printer to accept the cartridge. The cartridge is in perfect condition.

  What exactly is the error message?   Click on the appropriate link below.

  The "print head problem" or "Print head seems to be missing or corrupt" error

  Message "Ink cartridge problem" on the product

• How to solve the Message "Incompatible print cartridge".

  Hello everyone

  Have you ever received the message "Incompatible print cartridge"? This may be caused by defective cartridges, dirty cartridge contacts, or by using the wrong cartridges for your printer or the region. If you get this message after moving to another country and using a different HP ink you will need to call HP support and ask them to explain how to change the region of your printer.

  If, however, you have not moved and you get this message with a new cartridge or current a little troubleshooting can be made. There is an article and the youtube video to help you to solve this problem, they are two excellent tools for troubleshooting. If the steps do not resolve your problem that make sure you try a different cartridge because it helps to isolate the problem to the printer or cartridge.

  The "Incompatible cartridge", 'Incorrect print cartridge' or 'Print cartridge problem' Message disp...

  Difficulty a Message "Incompatible print cartridge" - all-in-one printer, HP Officejet J4680 range

  If anyone has any questions let me know and I'll be happy to help you. The video and the above article is for the Officejet J4680 but there is another version of the article for the other printers that can have cartridges more than just two.

• Officejet 5610 all-in-One: cartridge Error message:-see the documentation for the device to solve the problem

  I used Cartriege world genuing HP ink cartridges refills for the past 3 years.  These cartridges are about 3 months charging sine and worked very well.  I just print a page and then got the above message for the first time.  Any help?

  Thank you

  lurcher1

  Hello @lurcher1,

  Thank you for visiting the Forums from the HP Support! I see you are using cartridges refilled with your HP Officejet 5610. You have always used refilled cartridges, but now you've found a cartridge error.

  I would like you to start troubleshooting here: 'incorrect print cartridge' or 'Print Cartridge problem' message on the Panel of printer for HP Officejet 5600 all-in - One Printer Series

  You will notice Solution: use genuine HP cartridges :

  'HP recommends you to use genuine HP cartridges. HP does not guarantee the quality or reliability of cartridges HP cartridges refilled HP. If you use genuine HP, the following cartridges no could not solve your problem of print quality. »

  To get a better understanding to take a look at the documents below:

  Can I recharge the ink in my HP ink cartridge?

  &

  HP vs reloaded cartridges inkjet print cartridges

  I hope this helps, if you still get the error message after replacing authentic ink cartridges, I suggest you contact our technical support at http://support.hp.com/us-en/contact-hp. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  This is a great question other clients may also wonder; Please click the "accept as Solution" if you think that this message has helped you, or could help others. You can say thank you easily by clicking on the ' Thumbs Up ' below!

• pc2510 check right printer cartridge/no taken into charge/hourglass errors

  Hello!

  If anyone has had success resolving these errors, please let me know, even if it is intended to replace your ink cartridge. Thank you!

  Error description:

  Original problem: printer cartridge "Check right printer cartridge" error message blocks any use of the psc 2510, including analysis and noncopying functions not printable.

  Current issue: hourglass gel accompanied by sounds (alignment?) printer that stops, but message screen ahead never past hourglass...

  Summary of troubleshooting:

  I got an error saying: check the cartridge in the right store. Tried cleaning the contacts on the cartridge and printer with distilled water. When using tactics in the online tutorial, I tried unplugging the power while the printer is open. Since then, just going through hourglass and his printer, it does not advance beyond this icon screen.

  Technical customer support:

  Suggested a semi reset of # and 6 keys more disconnect and reconnect or try the new print cartridge. When asked is there something I could try before buy a new cartridge, suggested I unplug and hold button power for 10 seconds, then reconnect. (Full description of these stockings). For further research, the representative suggested an upgrade.

  Hourglass fix employed attempts of the forums:

  Tried to plug into the wall Strip vs. (Fully plugged loose connection to the brick when notice was not in all the way.) Reset the modem. No results.

  What I have tried:

  Haven't tried a new cartridge in the printer until you have exhausted all non-monetary fixes.

  Full description of troubleshooting:

  The first error: check the cartridge in the right store occurred all of a sudden after use without problem.

  The contacts on the black cartridge have been cleaned, but the error persists.

  After cutting the use for awhile, I reconnected him last night to resolve the error on the current Mac computer printer cartridge. Installation was completed successfully.

  The same error once the installation program completed.

  I performed the following:
  (1) cleaned the contacts on cartridge black print using distilled water.
  (2) disconnected the power cord (by post in the forum)
  (3) disconnected power cord and tried pressing Cancel/left arrow (by the same post in the forum)
  (4) contacts cleaned behind black printer cartridge
  (5) print cartridge black removed, closed insert machine and got error black cartridge (attempt to determine what cartridge was the problem)
  (6) even if this message appears to indicate that the black cartridge was the problem (by the article of the web support) I cleaned the contacts on and behind the cartridge color as well.

  As part of troubleshooting, I had a second error: "Print cartridge in the right store not supported."

  I noticed that the adjustment is more flexible than in the color cartridge. I inspected the box spring and cartridge for damage and found nothing. Clean the dirt, however below the contacts on the machine.

  Also, at some point during troubleshooting, I could access the menu scan but then he quickly returned to the first error message.

  (7) for each article in general support online, I tried to unplug the power, while the cover is open (as shown during the cleaning of the cartridges). This information was not in the manual that came with my camera. I was hoping that this could restore the things.

  Then I got the third mistake: a period of sounds of the printer (alignment?) followed by hourglass on the screen.

  The 2510 seems to be frozen. No buttons like cancel or menu or the button caused no response.

  I unplugged it again (this time with the lid closed) and got the same series. A period of sounds like alignment, then a stop of sounds with the hourglass stays on the screen.

  Customer Service Rep sent the following:

  E-mail 1:

  1. If the printer is on, without turning it off, unplug the power cable of this one.

  2 hold down the # and 6 set, while you hold them, plug the power cord into the printer

  3 hold the keys for about 30 seconds, then the printer tries to turn on, then release the buttons.

  4. If the printer turns off, use on the power button on the printer and follow the instructions on the screen.

  If she always comes with the same error, I ask you to try with a new black cartridge back to us with the results.

  E-mail 2:

  1. when the printer is turned on, without turning off the printer, unplug the cable it

  2. press and hold the button for 10 seconds and release it.

  3. after 1 minute, plug back power cord and try to turn on/off the unit.

  The reason why I suggested to try with a new cartridge is every time that powers printer on, he made a self-test to make sure that all hardware components that work very well, including cartridges. So if there is an error with the cartridge, the printer might freeze if it is unable to determine the cause of the problem or of the point of failure.

  E-mail 3:

  I did some research and the issue seems more likely with the hardware of the printer. [...]

  If the problem persists, get back to us with the information below for the upgrade for your printer options.

  Forums:

  Then I tried unplugging power strip to wall socket and the modem reset without result. Blue light for wireless connection is no longer on.

  Message edited by allinfun2510 on 04/05/2009 17:46

  We discovered the printer from my husband uses the same cartridges (this is also a hp) and so we have put a new cartridge in my all-in-one and it worked. It my case the error was really indicating that I have just needed to replace the cartridges (they were probably too weak or ink)

• HP Officejet 6835: Not to recognize new printer cartridges.

  Exchanged a defective HP Officejet Pro 6835 at Costco. I kept the old cartridges and Costco pulled the new printer cartridges and kept them. During the installation of the printer does not recognize the used cartridges. Error message received to use cartridges supplied with the printer configuration. Did not have them. Is gone to town & bought new HP cartridges and install. The printer took over in the same place on the installer. It does not recognize the new cartridges. What can I do? I can't start the installation program. I remove the new cartridges and reinstall them using and get the same message again. She can't get to work, so I'll have to make another 90 mile round trip to Costco to replace this printer.  Any suggestions?

  Doreen

  You will need to install cartridges for initial configuration, Costco shouldn't have removed the cartridges setup.  You can contact HP, they could send replacement cartridges setup or they may suggest that you only contact Costco.

  From a post of Sunshyn2005, contact technical support HP see the following link to create yourself a file number, then call and it can help to expedite the appeal process:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  
  File number and phone number appear, this allows to contact HP.

• OfficeJet HP5510 remove and check black print cartridge error

  Hi, my OfficeJet 5510 was printing very well. Then suddenly gave me the error "remove and check black print cartridge". The cartridge has plenty of ink. Remove and replace the cartridge. No luck. Past to another black HP cartridge. Same mistake. Any suggestions?

  Hello

  Only two suggestions for you, but they might do the trick:

  Try the troubleshooting steps as much as possible the documents below. The only step that you should ignore is to buy a new cartridge, since you just got a new.

  "Remove and check [color / black / photo] cartridge ' Error Message appears on the screen of the control panel.

  "Incorrect print cartridge" or "Print cartridge problem" message