Print email on photosmart 3310 problem

Similar Questions

• unble to print wireless hp photosmart 3310

  I'm trying to print wireless HP Photsmart 3310. Print job goes to the print queue, but does not print. When I check Windows printer and peripheral, it has a tick, saying that the printer is ready.  I've set up Wifi with precision which gives the correct password.

  Hi pranwala,

  Thanks for letting me know.

  Verify that the IP address listed for the printer on the computer see if it is correct.

  Go to start, devices and printers, right-click the printer and click left on printer properties, select the ports tab click on configure port and check the IP address of the printer.

  If the IP address is not the same thing as the printers, then proceed as follows:

  Go to start, devices and printers, right click on the printer, go to the printer properties, select the ports tab, select new port, click the TCP/IP addresses standard, next, type the IP address, then finished.

  Make sure that the printer is offline by right-clicking the printer, see whats printing, click printer at the top of the screen, make sure you use printer offline is not checked. If it's click to uncheck.

  Test the printer.

  If you still have problems then I download and run the printing and scanning doctor as it may solve the problem

  automatically. Find and fix common printer problems using the tools of diagnosis HP for Windows.

  Thank you.

• Printing with the Photosmart 5514 problem!

  I have a Photosmart 5514 and have just started using it and I probably did something wrong as a beginner and I need help to solve the problem.
  How can I remove printing pending to be executed? I don't know why there is a print job in the queue and when I put in the book, nothing happens.

  Thank you very much

  Jeff

  I'd take a glance on the document below it will show you how to remove jobs from the queue.

  Click here for the document.

  Let me know how it goes.

• Printing with a Photosmart B209a problems

  I have a Photosmart printer that I bought a year ago. It is wireless capable, but at the time I bought it, I didn't have a laptop. Now I do. I tried to install on my wireless several times, but still, it happens at some point and did not finish. Any suggestions?

  I'll be here until 9 am cst tell me when you get this

• Printing with Macbook Photosmart wireless problem

  I'm not sure if anyone can help, Im a beginner and not very technical so be sweet/patient.

  I bought a HP Photosmart B110, that allows to print wirelessly to a network for my son who just went to College. It has a Macbook and all seemed well with the implementation and test pages printed with all the "Passes" while trying to find the printer on the network no printer showed. I added manually the printer even if the instructions have not really cover how to do this with a variety of menu options such as the LPD, HPJet and intellectual property. I went down the road to intellectual property and were able to get a test page to print, but whenever I try to print a document or scan something I get an error despite initially seeming fine. To do this, what you expect on the first ' print page 1, Page 2, etc. ", but a yellow triangle appears on the printer icon and a message" network host 172.xx.xx.xx is busy will retry in 20 seconds...» 30 dry etc."the Mac can see the printer on the network of the United Utilities to print all come showing the use of ink etc (and as mentioned printed the test page) but I'm really stuck on why I can't get a document to print, can someone point me in the right direction please.

  I do not large companies such as universities allow individuals to add devices to their network, such as printers.  If they allow to connect, it may be that they do not manage the data circulating on the printer.

  In addition, it is a bit dangerous to add a printer to a vast network that anyone can print on it at any time.

  I recommend this printer connected to the computer via USB.

• Printing Emails

  I have a new printer a Kodak. When I try to print emails, I have two problems. The only way to print the entire width of the email is to use the tiny footprint that is not readable, otherwise the list of contacts obscures the right side of the email. Two, when I print only the first page of the e-mail is printed even if the value of the order to print all pages.

  Can be useful to know what webmail services you use, another user of that service may be able to help with the details of this service.

  Is there a button print or a printer button ready on the email page?
  
  That should help you to print only the content of the e-mail, without the navigation menu of sites currently printing on the left side, and allow Firefox to wrap the email and do not cut off the right side of the page.

• HP Photosmart 3310 printer. Problem with new cartridges hp 363 original.

  I live in Italy and I bought an all-in one HP Photosmart 3310 U.S.. Once the original ink cartridges were being run-out, I bought a complete set of original HP ink cartridges that are new in Italy. Now, the printer screen displays the following message: "Printer set up to use ink cartridges 02" and do not want all works. The ink cartridge, I bought was 363 (n.6 cartridges for all 70 euros!). Please let me know if there is a way to change the configuration of the printer and allow it to work with 363 cartridges instead of 02. Thanks in advance for your answer. I'm looking to pass on your instructions. Best regards. Carlo of Urso

  Of course, I can't speak for cdurso, but for my part, HP refused to help me with the reset of the region. Some representatives of the foreign customer support told me simply repeatedly that my printer was obsolete, and that I had to buy a new one. However, I found a solution very simple to my problem. I simply pulled the chip on the ink cartridge in the region that the printer has been set to, and I stuck on my new cartridge. I think that this would negate my ink level readings, but it allows me to use the printer, which now works perfectly. I just have to ignore the "expired cartridge" message I get every time I need to activate or reset it.

• All-in-one HP Photosmart 3310: 2 HP inkjet printers different... same problem

  The time which was formerly set via the network apparently to I remember ever setting the time on one or the other. Today, I noticed for the first time that both of the printer are turned off as follows:

  HP Photosmart 3310 all-in-One - Time is 19:43 locally the printer indicates 19:12 (thirty minutes slow).

  HP Photosmart Premium Fax C309a series - time is 19:43 locally the printer indicates 19:35 (slow 8 minutes).

  Two of these printers previously seemed auto-sync the time on the display panel. Is it possible that my ISP has started to block the NTP port or something?

  Hmm, no, I just connected to 0.pool.ntp.org via ntpdate on my linux machine, and he was not blocked. So it's something on these printers has gone wobbly.

  Hi @tcagle53,

  Thanks for joining the Forums of HP Support with your request for time to printer.

  I understand that you have 2 printers and a HP Photosmart 3310 HP Photosmart Premium Fax, and each printer is showing incorrect. I would like to help.

  The printer usually have the user set the time and Date when the printer is in the configuration. Sometimes things like power outages or to unplug the printer can cause time to read properly.

  You can set the time to the correct time using the printer control panel.

  To set the time on the HP Photosmart 3310 device:

  

  To set the time on the HP Photosmart Premium Fax:

  1. press on the installation program button.

  2. press the button arrow down to select Preferencesand then press OK.

  3. press the down arrow button to select the Date and timeand press OK.

  I was not aware of the printers synchronization automatically at the time of the computer, but sometimes the built-in Web server (EWS of the printer) will have a setting "Synchronize with the time on the PC" that can be selected if the printer is used on a network.

  

  Once the built-in Web server is in charge there should be a tab somewhere near the top of the window.  If you click on Date and time parameters should be able to be selected on the left side. If the sync option of the printer with the computer time is available it usually a checkbox to check before you click apply. Printer not all have this option.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• HP Photosmart 3310 all-in-one does not print print test page doe but doesn't show is not black

  I have a printer all-in-one HP Photosmart 3310 that does not correctly print a test page (print color but not black) and does not print a WORD document from my computer.  The color that should be black in the test page after CLEANING print head appears as a Purple-ish Brown, although after the PRINTER SNAP the printed page shows a short BLACK bar to the left of the five longer bars in FIVE COLORS.  The computer in use is a HP Pavilion dv7 with processor Intel Core i7-3610QM, 2.3 GHz, Ram 8. 0 GB (7.9 GB available), 64-bit and Win 7 Home Premium OS, SP1.

  After having downloaded HP Print and Scan doctor, we arrived, after a series of steps to "If the cartridges have been refilled and none is empty, try calibration of color": Open HP Solution Center (start, all programs, HP, HP Solution Center), then click on settings, settings, printer Toolbox, printing on the tab device Services, click on color to calibrate.  This procedure is NOT AVAILABLE, however, because I can't find the HP Solution Center.

  What should I try to fix this problem?  Please be specific - and please also include any recommendations for a remedy that is exactly what happens if something must be verified or checked before trying the recommended remedy.

  Since the last post, I repeated the test several in Solutions of HP.  Whenever I have repeated the procedure clean print heads, improve the quality of printing in black ink a little bit.  After several passages of this test, maybe 5 or 6 more and separated by some rest of the time, the quality of printing in black ink has reached the State that I consider finally acceptable.

  A variable that I can't rule out or rule through all this is the temperature and the humidity.  It has been a winter VERY exceptionally difficult, with a lot more than zero days and subzero temperatures.  And with that comes challenges with the indoor humidity (even if we have the whole House humidification).

  In all cases, the printer now works without problem.  And I'll post that I accept the solution most recently proposed by the HP Forum.

• Photosmart 3310 printing issue - apparently ink leaks and failures of alignment

  Hi, sorry to bother but I am facing a problem with an All - In - One Photosmart 3310.

  -I am running windows XP.

  -L' printer is connected to several for my private with band wifi LAN.

  N ' got no code error on the question

  -All used within the printer cartridges are genuine HP and photo paper was also 10 x 15 HP (the one provided with the packs of cartridges).

  -L' printer is a little over 4 years now and he has his crazy suddenly two days ago. The printer has not been moved or damaged, it simply sound suddenly started printing blue black & white text characters and ended with the ink.

  As I have already experienced similar problems with some other printers, I well as cleaning cartridges and lining up, but it has not changed anything. I finally changed all 6 white ink by new ones, but all the same. I cleaned again, tried to align, but once again, no possible way to achieve alignment. "Alignment failed" came out at this stage.

  Here are some pictures to illustrate because I tried several impressions to make sure it wasn't a short-term problem be resolved with cleaning or alignments: photo printer problem

  It should be noted that no two prints come out the same way, some are mainly blu, other yellow or green...

  At this point, I didn't Kow where to start with this problem. There seems to be a leak in the print head (assuming that the magenta) and another leak with the blue wire (it can not see on the pictures, located at the bottom of the left hand side, but could not get any pic suited because of the plastic on the printer cover.

  So, I'm wondering the following things:

  -What a sound suddenly went to the printer?

  -It worth repair?

  -How to proceed?

  Any ideas? Thanks in advance for reliable advice.

  Alignment is probably a failure because of the incorrect colors being printed on the page. The printer scans each line or section of the alignment page using a special sensor inside the printer and check all colors from ink and their bosses and investment. If one of them is not what the printer is expected to be, the alignment will fail. I don't know what film you're referring. But I don't think it matters, as the cause of the failure of the alignment is quite obvious.

  I don't think it's possible for you to do something to solve this problem. Take it to a service center would be a better option, cos they have the tools and the expertise and training to do such things.

  The upgrade process differs from one country to another. I'm not sure of European countries, but in the United States, you can call the support technology and upgrade to a new printer with similar features as yours. HP has TS lines for printers, which is very different from Smart Friend. You must pay any fees to call them and talk to them. If you are in the United States, call 1-800-474-6836 and choose Photosmart all-in-One printer as your product to be transferred to the printer Dept

• Photosmart 3310 prints random colors even when printing black

  Photosmart 3310 prints random colors in color, print and even when printing black.  This happens with photos, copies and printing documents.  I cleaned the print heads, ran the scan/repair software that says that the printer works fine. tried color calibration and these charts don't print correctly to match the place.  The first printed grid gray background with the nuances of roses square.  Printed low rack square pink dark only on white, there was no way to calibrate.  I put in all new inks (hp only of course), and the printer recognized them.  I have unplugged, rebooted, uninstalled, installed again.  Help, please!  Thank you.

  I'm sorry you are still having the problem with the printer. You can always review the HP upgrade program. This is where you can buy a printer refurbished at a reduced price, which will be accompanied by a full factory warranty. These printers will also be eligible for care pack extensions too.  The number for USA and Canada customers to call is 1-800-474-6836. I am adviser to this program so that know all the options that are available to them when we're under warranty.

• HP Photosmart Premium C309 wireless, can't print emails, but all the rest print on HP laptop

  I can print anything on my HP laptop, but I can't print emails from my wireless HP Photosmart Premium C309. What could be the cause?

  OK, the printer is connected to your router fine, so the problem is probably in your PC.

  I recommend you to uninstall the HP software (with uninstalling HP), reboot, then download the latest version of the software for your printer from the "Support & drivers" link at the top of this page.

• PhotoSmart 3310 instal can't find network printer

  I have a HP Photosmart 3310 that works fine on my XP computer.  When I try to install it on the Windows 7 computer, it installs the drivers, and I can add a new network printer using the IP address.  However the HP All In One install program (AIO_CDB_FSW_Full_Win_WW_130_141) will NOT find the network printer (even with the static IP address).  The HP printer and scanner utilities can find and work (HPPDU & HPSDU).  the HP diangostic untility network works and finds the printer (HPHNDU).

  The problem is that with on Setup search the Photosmart 3310 it won't allow the solution Center HP open and use the scanner.  Can I make a shortcut on the desktop to program scanner?   Where and what is?

  I also tried to plug it into a USB cable and has not received much love from the Setup program.

  The issue of 'Imcomplete Install' returns after a day or two.  Again, this is a brand new computer with a clean installation of windows and Norton, HP, and Government issued smart card software.  Nothing weird.  The other computers in the House are fine.

  I found an alternative solution that works:

  I found a solution to the issue of scanner!  I installed the software VueScan from http://www.hamrick.com/ , the software is designed for high end photo editing, so it's a no-brainer for her to scan documents.  The free version works fine. If I wanted to the cost of the professional version of the $90 is nothing compared to the time I've wasted on getting the HP software to work.

  To resolve the problem of the printer, I installed the driver through windows and bypassed the HP software.  The only thing that miss me is now the ability to fax, but which can be performed directly from the HP Photosmart camera.

• Cannot print from MacBook Air on the Photosmart 3310 network

  My MacBook Air can connect and print via the USB port on my HP Photosmart 3310 printer, but it can not connect via the URL on the wired home network. The printer is connected to our home network and works perfectly with several other PCs, wired and wireless. Using the option of printing and scanning in system preferences, I chose the icon IP and entered the URL of the printer: http://192.168.1.10 (tried with and without the http://). Under the protococol, chose Internet Printing Protocol - IPP (also tried the other options). Use the default name (address echo). Location in the basement and selected "HP Photosmart3300 series" as being the solution of printer software.

  After the implementation of break, I get the message, "failed to make the printer on your network. " Unable to connect to ' 192.168.1.10"due to an error. You want to create the printer? "When I say yes, he creates a printer icon, but says that the printer is offline. I did, but I would like to see the information tab showing the serial number, address, etc. If communication with the printer exists, but no handshake for printing.  Any help would be greatly appreciated.

  Please contact me at [email protected].  Thank you.

  Wizdad

  Just solved the problem by downloading and installing the update of the HP v.2.14 for OS X printer drivers for http://support.apple.com/kb/dl907.
  Protocol should be "HP Jetdirect - taken." Thank you all for this forum. I should have read before posting.
  Wizdad

• Can't print emails Yahoo. Is this a Firefox problem?

  Can't print emails Yahoo. Is this a Firefox problem? I can click on print and e-mail opens in a new window, but when I click on print in the upper part of this new window it sounds right. The only other option on this window is "close this window".

  A fact used to knit before and recently stopped printing?

  To test how Firefox works no 'custom' on your system, could you experience in two minutes?

  Create a new Firefox profile

  A new profile will be your plugins installed by system (for example, Flash) and extensions (e.g., security suite toolbars), but no themes, other extensions or other customizations. It should also have databases of completely fresh settings and cool a cache folder.

  Out of Firefox and start in the profile using Start Manager > Search box (or run):

  firefox.exe -P
  

  Any time want to switch profiles, exit Firefox and return to this dialog box.

  You will click on the button create a profile. I recommend using the suggested default location (do not click the button to choose a different folder). Then launch Firefox in the new profile that you have created.

  You can get the print in the new profile dialog box?

  If so, it is probably a problem with one of your files, settings or extensions. If not, your installation of Firefox is maybe damaged. Rather than insert pages of instructions at this point, could report you on the results of the test first?

  When you return to the Profile Manager to return to your normal settings, you might be tempted to use the button to delete the profile. It's a little too easy to accidentally delete your 'real' profile, so I recommend you to resist the temptation. If you don't want to clean up later, I suggest to make a backup of all your profiles first in case something go wrong.