Print gets scrambled to the top of the screen down, I look at a selected site?

Similar Questions

• Everything I print gets stuck in the queue, but the document is printed

  ORIGINAL TITLE: Spooler

  I installed a printer on a pc windows 7 64. Everything I print gets stuck in the queue, but the document is printed. The printer is on the network, I tried to restart the spooler and erased the record of the spooler, but perisisted of the question, given that the document gets stuck, no other agency will be able to print, remove the paper and print again to print but the file gets stuck again on the queue. I tried to change the IP address, but the same thing happened. Can someone help me?

  Hi, Omorguz,

  Printer brand and model, if you please.

  Start > run > type services.msc

  Press enter

  Scroll down to print spooler

  Select stop

  Let Windows stop the spooler

  Control Panel > printers and Faxes folder

  Right-click on the printer icon, then select open

  If you see pending orders in the queue, select the

  Click file > cancel all Documents

  If a job shows the deletion, but never finished, open the command prompt window

  Start > run > type cmd

  Press Ok

  Enter Net Stop Spooler

  Press enter

  Wait for the DOS window opens and is

  Open the command prompt window

  Type Net Start Spooler

  Press enter

  If that does not cancel the print job:

  Your directory of spools Windows XP is located at

  C:\WINDOWS\SYSTEM32\SPOOL\PRINTERS

  It will usually contain files like these:

  FP00008
  FP00008. SHD

  There are two files for each remaining print job.  Just delete these and restart the computer.  Your queue should now be provisioned.

  If you are printing over a network, and the queue is not clear after the above steps:

  Go to the computer that has the shared printer connected and perform steps 1 & 2 above.

  If this does not work, then go to the computer when he was sent to the printing of the task and perform the steps 1 & 2 on this computer.

  Run chkdsk

  Start > run > type CMD

  Press Ok

  Type C: chkdsk/r/f

  Press enter

  You will receive a message re: volume must be locked and you want to start scanning reboot?  Press y and press enter

  Type Exit to close the CMD window

  Restart the computer for the scan at startup

  This will check the integrity of your data on the hard drive of computer as well as find and fix errors that could corrupt your data or program files.

  I even recommend that you uninstall the printer and when you are done uninstalling, restart computer.

  When you reinstall the printer, reinstall it using the compatibility mode

  How to install a hardware device using the compatibility mode driver.

  http://social.technet.Microsoft.com/forums/en-us/w7itprohardware/thread/80cae5ee-dc98-4A2F-8284-a1ab826059b7

  It works on Windows 7 Professional, comprehensive and business - Windows XP Mode - it's free

  It's the best of both worlds: the new Windows XP Mode allows you to run Windows XP older right on your Windows 7 desktop business software.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-XP-mode

  e FAQ or choose a link from the top of this page.

• I recently accidentally dropped my laptop and now whenever I try to turn it on, it gets frozen on the screen with the logo of "starting windows."

  * Original title: start Windows 7

  I recently accidentally dropped my laptop and now whenever I try to turn it on, it gets frozen on the screen with the logo of "starting windows." When it disappears, the screen just goes black and nothing else happens. Logins appear not at all. I also tried to run in safe mode and safe mode with networking mode, but it has not loaded yet even to the windows splash screen. I ran Startup Repair 3 times now and he has not yet fixed my problem. I was wondering if it might have been damaged in the fall.

  Probably yes it is damaged in the case otherwise he would start.

• Print a string to the screen without using textfield

  Hello

  I want to print 100 channels on the screen, each chain contains one or two characters.

  There is no equivalent drawText. Is to create 100 textfield intensive resouce.

  Is there a solution?

  Perhaps this message on the conversion of bitmap of the text images will help you.

• Get blackheads on the screen when it is on some websites, slow stutter sometimes when viewing pictures etc.

  Hello I'm going to have some weird problems with my Mozilla firefox to the end, getting black dots on the screen when on websites, as a DS "http://www.komplett.se/k/ki.aspx?sku=635503" when I click on the image of the screen and stay there by clicking on back I have blackheads after like 10 click on max.

  http://I39.Tinypic.com/2dnion.jpg

  Often and is very enoying overall, I use firefox for years and love it, but at the moment I have to use Chrome to get stuff to work. It is above all this shit with blackheads. Another thing that was my Battlelog didn't show my hollow friends online but firefox which solved I think with reinstall it (done a reinstall and formatted the computer but the problem with the points is still there).

  I installed Java again and tried most things like disable the hardware accelerator but I always get the question, I thought it was my new graphics card but I had no such problems the first day (R9 280 X ASUS). I think it was the next day or 2 days after I upgraded to 8.1 pro (since then reinstalled as said to get pure), and I had these points.

  I almost sent my card back to the seller, but such that she feels right now its something with Mozilla Firefox because it happens that he (not in IE or Chrome) and never in the game in any game so far. Help!

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  If what happens after installing a new graphic display card while there might be a problem with this graphics card or with the drivers.

  Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) as a test to see if that helps.

• How can I increase the print size letters on the screen

  Sometimes, printing characters are too small and I need to increase the size (%) before printing a form

  The size of the font displayed on the screen does not directly affect the font of the printed size. The screen size is affected by the change of the Page or Zoom the text Zoom level. The print font size depends on the scale as shown in layout or preview before printing.

  File > Layout Page or file > print preview
  
  100% is the normal setting - it change that you find necessary

• Trackpad of MacBook Pro gets stuck and the screen freezes with pink and yellow lines

  So I'm really frustrated. I got my Macbook pro less than a year ago and Ive already had to get a bunch of replaced parts. I got my computer fixed as 3-4 weeks ago and they had to replace a lot of things (can't remember not what it was, but they had to remove all of the computer and replace some things that have been associated with the battery power /). Recently my computer did this weird thing where the screen freezes and pixelated pink and yellow lines will take right on the screen. In addition, the trackpad will be just stuck and I have to turn off my computer and turn it back on so that everything works. Someone at - he heard about something like that? I thought that maybe when I had my computer repaired they didn't replace not all properly? I did a check of the hardware on my computer (self-control an Apple recommended prior to an appointment at the Genius Bar) and he said that everything was going well. This poll looks like a hardware problem? Could this be a virus? Someone hack into my computer? I don't know, I'm just worried and frustrated :/

  Thank you!

  Photographing display abnormalities and make an appointment at an Apple store genius bar.  You are still in the warranty period and you have the properly repaired MBP.

  Ciao

• Office Jet 4632 only print what is on the screen (Web Pages)

  Hi all.   New to the Forum.

  I have a new 4632 Jet Office hooked up to a Samsung RV 511 computer laptop running Windows 7 via a USB cable.

  The laptop is a Stock machine.

  For some reason when I try to print from the Web, it shows only what is on the screen, rather than print all web pages.

  It does if I try Google Chrome or Internet Explorer.

  My old Windows XP with an all-in-one HP machine automatically prints all pages.  If you only want to print some texts, you can highlight and print only that.  Not so with this machine.

  Any help would be greatly appreciated.

  Thanks, Pete

  Hello Pete and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you are having problems printing.  I would try to help.

  I would say uninstalling the software of the printer.

  Once it is uninstalled, I suggest you put your system in clean boot mode in the configuration of Microsoft.  You can do this by following this document: How to perform a clean boot in Windows.

  Once the computer is in clean boot mode, I would suggest to reinstall the HP printer install wizard for Windows.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• How can I get rid of the screen which is in safe MOde?

  When I turn everything on the my computer, go to my desktop and a black screen appears with the 4 corners with lettering safe mode, I'm still able to see all my icons, but my problems, the screen on safe mode, how do I get rid of this? Thank you.

  Hello

  . What exactly happens when you try to connect to a Normal mode?

  Please follow the steps and the link:

  Method 1:

  To completely turn off Safe Mode and return to the Normal Mode:

  a. click on the Start button in the lower left corner in Mode safe mode, and then select turn off computer, select restart from the context menu.

  b. place your finger on the key F8 as the computer stops and restarts. As soon as it starts to boot the system, start pressing F8 repeatedly.

  c. stop pressing F8 when you see a menu of options appear on the screen. This is the start menu. Select the Normal Mode in the start menu either hit the number next to the Normal Mode or by using the arrow keys to select Normal Mode and then pressing "Enter".

  d. waiting for start in Normal Mode.

  Method 2:

  a. close all running programs and open windows if you are back on the desktop.

  b. click on the Start button.

  (c) in the search box of the Start Menu, type in msconfig and press enter on your keyboard.

  d. the System Configuration utility will open and click on the Startup tab.

  e. you will now boot options. UNCHECK the box labeled Start secure

  f. press the apply button and then press the OK button.

  g. will now present you a prompt indicating that you must restart the computer to apply the change.

  Click the restart button to restart your computer and check the current status of the issue.

  I hope this helps.

• utility printing and scanning on the screen?

  E525W printer, new user kit from Dell.

  Most other printing/scanning providers come with a utility to the screen to adjust scanning settings

  Reference Dell does a?  Seems strange (archaic?) having to delve into the pc driver settings to adjust those unavailable on the miniscreen of E525W,.

  silvabod,

  When you have downloaded the all-in-one color of Dell | Suite software E525w and driver it should be the Dell printer Hub program that displays the settings of the scanner.  You can click on the link below to download the drivers and the software file. You will need to configure the printer hub.

  The MFP color Dell | Pilot and more software E525w

• How can you get rid of the drop-down list such as videos in my photo folder?

  I accidentally deleted the video file in my photo folder, I thought that he would have pulled down I would be able to copy / paste this back, but he didn't. Instead it copied itself and left a drop annoying low bar in my photo folder, in which he used to let me delete it, or even hide. Help...:)

  Hello

  I guess you are referring to the drop-down list option videos list to include in the library in the photo folder.

  The option is available, even if a video file is not included in the folder.

  You can delete or copy and paste the video file to another folder.

  If you are referring to any other menu drop-down then validate a screen so that we can analyse the question better.

  Please visit the sites below:

  Take a screen capture (print your screen)

  http://Windows.Microsoft.com/en-us/Windows7/take-a-screen-capture-print-your-screen

  How i: post a screen shot on this forum?

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/how-do-i-post-a-screen-shot-on-this-forum/c86de820-C620-401c-A804-9f6337cd3053

• Impossible to get upward on the screen shortcut icons, I have them down

  I can't mount my shortcut icons on my screen, I can get to them in lower corners left & right hand and when I go to shortcuts. Want to just that they face up on the screen as usual.

  Hello

  We can refer to this article and check if that helps.

  (Overview) office: http://windows.microsoft.com/en-in/windows7/the-desktop-overview

  Thank you.

• The opening of the window to get started off the screen

  Hello

  I recently acquired a second display for my MacBook Pro, so when I have both connected displays and open Photoshop (on each screen) putting road window opens off the screen so I can't close it (see screenshot below). How can I fix it?

  Right now I have to open Photoshop with my second offline screen, close the window get started, then plug my second monitor.

  Thanks for your help in advance!

  ~ Taylor

  When you switch from Windows to the other display screens in Photoshop Photoshop close to this State Photoshop remembers where you position palette, picture windows and dialogue.  If you restart Photoshop and the other views are not available. Photoshop can open windows off the screen or partially off the screen.  At least seem be the way to a working windows.  Windows operating system provides means for moving and sizing of these windows.  Mac may also have options.

• CTRL/0 gets "worthy on the screen", but that it reverses?

  I use CS3, but I think it is the same in other versions.

  View > Fit on the screen (or Ctrl + zero) works very well.  But how you go back to the previous state?  CTRL + Z does not do

  Window > arrange > new window, set it to adjust the screen and then close when you are finished with it. If you do a lot, do an action of it.

• Computer won't start and the screen is weird looking

  After the maid left today, I noticed my computer screen on my DELL PC running Windows XP HOME Edition (service pack 2 or 3 - I don't know) seemed strange. The pixels have been weird in several areas of the screen and the cursor froze.  I tried to turn off the computer, but it will turn off, then I disconnected and finally had to hold the power switch on the CPU for a few seconds to turn it off.  When I tried to turn it back on again, it showed Windows startup to the top of page - but the screen still seemed weird - kind of out of touch.  The computer does not start.  It's just a black screen with a cursor in the middle of the screen is frozen and the mouse does not move.  I tried to push the F-8 when starting Windows screen came. He took me to a different boot options menu, but always with the print-screen out of phase. I tried a few startup options, but it just brought me back to the Windows boot screen with the logo being shifted - sort of split and strange looking.  Is it possible that my maid has done something to the computer, wiping down? Is it possible to fix this? It's never happened before. Can someone PLEASE?  Thank you

  Hi Goldie309,

  I suggest that you reset the default monitor settings using the buttons available on the computer screen and check if that helps.

  You can also connect another monitor to the computer to check if the monitor is defective.