Print in indesign?

Similar Questions

• HP Photosmart 7280 C: Jam printer when printing from InDesign

  I seem to be able to print anything, except when a print to InDesign file. When I try, I get a paper jam?

  Hello

  You use a different type of paper to print with InDesign? The program itself can cause the paper jam, but maybe the settings or the paper you are using are the cause of the problem. I often print on thicker or InDesign photo paper and usually just put a sheet in the printer at a time to help with jams and paper pick up questions.

  Please report parameters and the type of paper you are using to help find a solution. Thank you!

• Hello world! I try to print my indesign booklet in pdf format, however, is greyed out in the SETTINGS of the PRINTER to set the CUSTOM PAGES.

  Hi everyone! I try to print my indesign booklet in pdf format, however, I have the option to in the SETTINGS of the PRINTER to set the CUSTOM PAGES is grayed out. I already tried to use the Acrobat 9 PPD here: https://forums.adobe.com/message/5819369#5819369, but still it does not work. I chose the PostScript file and in the next menu, the new preset, I downloaded does not work. When I export to PDF, all my bleed, colour, cultures etc information is lost. What could I do it wrong? Help, please. I use Windows 10, Indesign CC.

  As mentioned, you don't do this correctly.

  (1) you ask your printer if it has specific requirements for a PDF file.

  (2) If you do not have this, choose export using Adobe PDF export.

  3) select from the list of presets, PDF/X-1a

  (4) in the subsequent dialog box tick Pages (not Spreads)

  (5) under the tab printers and bleeds, select Use background settings lost document.

  Pass the PDF file to the printer, as Bob mentioned that printers will make the taxation.

• Print my Indesign file content (black & graphic text semi transparent) on a grey T-shirt

  If I want to print my Indesign file content (black & graphic text semi transparent) on a gray t-shirt, the "white" background of the Indesign file print under white or transparent? Since I want the background to be transparent, there are special Indesign settings needed to get there? Suggestions appreciated.

  Unless you have added a white spot, it will be transparent.

• When I open a new document for print in indesign, which is the default document PPI?

  When I open a new document for print in indesign, which is the default document PPI?

  There is no such association resolution level file in InDesign. The elements of your InDesign layout retain their respective characteristics; a 72 DPI raster image can coexist with a 300 ppi raster image and a 150 ppi raster image, as well as resolution independent vector graphics and text; and they all remain exactly as they are, independently of each other with respect to the resolution.

• Transparent bitmaps have a discoloration during printing. InDesign

  It must be something simple, and I'm sorry if it is.  I have to be using the terms wrong when searching, I'm not a professional printing.  I thank in advance for any help, you may be able to provide.  I am at a loss.

  Whenever I have add a bitmap, or a png, tiff gif, which has a transparent background, I can't place it on other objects.  Whenever I do, the alpha channel prints as a slightly different color.  There is no indication on the screen, but if I print via InDesign or Acrobat after the converting to PDF a box appears.

  In the case this morning, I need to add a round stamp on a color fills the rectangle.  I tried the seal as a TIFF, png and the Native PSD.  There is only one layer, the round stamp.  I used "place" to place the object in InDesign and everything seems fine.  Here's what it looks like after export to PDF.  In Photoshop there is no color difference at all on the gray background when I took a screenshot.

  

  When I print the image, this is what I get. On some printers, the effect is not so bad, but still present.

  

  I worked around this problem forever, usually, I just change the design, so I need to ride anything, but is really limited.

  Any suggestions? I'm on a Windows 7 computer running InDesign and Photoshop 5.5.

  http://InDesignSecrets.com/eliminating-YDB-yucky-discolored-box-syndrome.Ph

  p

• Print quality poor on the logos of the bitmap when printing from InDesign

  We have a Mac studio. One of them prints this indesign document well, the quality of bitmap images appears as it does on the screen.

  On all other Macs on the same printer, print the logos of the bitmap on the same document with a really poor quality.

  Any ideas? It drives me crazy that have checked the settings of the printer, and it seems that they match the Mac to work.

  Don't think it's a thing of driver as anything other than the bitmap to print logos and all other documents very well.

  In the print options, you should also go to the poriton of "Graphics".

  Make sure it is not set to the Proxy - make sure it is set to "Subsample Optimisied" or "All".

• Printing from InDesign for Epson Stylus Photo R3000

  In InDesign CS4 when I go to print to my new Epson Stylus Photo R3000, I don't see any options necessary to select types of paper, color or black, IPR, etc. in the printing establishment of Project dialog Panel.

  However, when I use Quark I see all the options I need. Surely InDesign should have them too?

  Please can someone hepl?

  Thank you very much.

  Oh, re-read your messages earlier, you say:

  Dialog box comes under 'General' at the top by "Printer" the only option that he has 'Epson Stylus Photo R3000' which is the printer I have.

  and then separately:

  Yes, but if you hit 'printer' in InDesign all you get is a dialog box saying use of InDesign print dialog box to "avoid conflicts of impression. Then you are taken back to square one where you cannot select the printer determine color and therefore cannot choose the types of paper etc.

  Are you saying when you hit a printer you get this? :

  

  If Yes, then you have to hit the triangle I circled in green, to get to this:

  

  And you should get a whole lot of choice in the drop-down list of oval-surrounded. Some may be specific to a printer, and some cannot.

  Is not what you get? If this isn't the case, maybe you should post a screenshot.

  I'm not really convinced that the choice of the color in the InDesign print area management has much to do with what you want to accomplish. Certainly, it should not influence selection paper. for example.

• Export PDF printing from InDesign CS5

  Until last week, when exporting an InDesign CS5 document in PDF format, it was a choice of Print or Interactive. Now, there is no other choice and it assumes that the PDF is Interactive and gives to think I have change the color mode to my RGB document, which I won't do. Help!

  If the PDF (Print) option is missing file type form the drop-down list in the dialog box, see 101 troubleshooting: replace, or 'trash' preferences

• Cannot print documents InDesign CS-2

  I bought InDesign CS2 and made dozens of forms, brochures, etc. I can't print anything. I have the CD, it asks me to reinstall, I have nothing. I know this is an older program, but I need to print documents. I think that Adobe really could not give support to users who fail to comply with the latest iteration of the product.

  Help me

  MARY

  What operating system do you use CS2? It is a very old version that will work on any current computer systems.

• How to configure margins for printing from InDesign books?

  Good evening

  Please, I need help to solve this problem.

  I have created a book (made many documents - INDD files) InDesign. So far so good... I would like to print this book (he has 9 chapters, which means, 9 INDD added to this topic). However, I set each document as 'facing pages', but the margins of each page are different.

  It has:

  RIGHT - 1 centimeter

  LEFT - 1.4 cm

  INTERIOR - 2 centimeter

  OUTSIDE - 1 centimeter

  The problem is that some documents end with a right-hand page, and the following document begins with a right-hand page too (so margins become a problem because I have to send to the printer shop and margins must be accordingly). Some chapters have only a single page, so that it follows a unique page template, but I need to deal with pages...

  In order to set the margins, I created two master pages and margins applied to them.

  Then, I applied these master pages to the membership of all documents (INDD) of this book.

  Please, I need your help to solve. Thanks in advance!

  If you allow your page numbers in the book to be "continue from previous document" file, your pages will take the correct position.

  Like this:

  

• No menu item print in InDesign default menus

  Getting started with a sample document my CC (2014) newly installed InDesign and press Command + P a few times and nothing happened. Looked in the menus and no item print in the file menu.

  Checked the customization of the menu and InDesign Defaults does not list a printing function. Workspaces switched and still no appearance of printing. Daughter of disappeared.

  Don't remember reading on what one of the new features.

  At my installation of creative cloud fool you?

  MacPro 2011, OS X 10.8.5

  Fixed it:

  1 - Ran the application program uninstaller for InDesign CC 2014.

  2. I'm not creative cloud

  3 - raise creative cloud. Clicked on install InDesign CC (2014)

  4 - works now.

• Print from InDesign prints fine, but print after that exporting to PDF prints black as gray, low Image quality

  Hi all

  I have a printing problem going on with a document that I am currently trying to print.  When you export to PDF (high quality print or press quality setting, as well as to any possible color output) and then print, black my document go to the gray and the images look washed out.  This does not happen if I print directly from InDesign on my printer.  I tried to change the merger of transparent space, change the color profiles document and corresponding to export options to the options used when you print directly from ID, all without success. the document is always printed wrong when exporting to PDF first.  Any ideas why this might happen when exporting or printing to PDF, but not when you print directly from ID?  Thanks in advance for any help!

  I see.  Is there a way to ID artificially add CMY export in the same way as it does when sending to print?

  Is the destination of the document a composite digital printer or an offset press? If it is composite set your black preference for export fills and convert to RGB on export:

  

  

  In Acrobat, the two blacks will be 0. 0 | 0 RGB and will display the same

  

• Rows in table stall to print from Indesign PDF

  Tables set up in Indesign where the header is very pale and header rules are on 0.5pt white. In the main part of the table, the rules are the pale color to 0.5 pt.

  All prints OK except the white horizontal ruler in the header. Please see the image below. Is that the line under "All specific options" which is not print, prints all other lines and they are all 0.5pt wide.

  

  The missing line is less than one "cell merged so I was wondering if this could have something to do with it?" However the tables created without any merged cells could be problematic.

  The files are created in Adobe Indesign CS6 and PDF files is generated from the file. The same software and settings to run through a number of Mac but the final print has the same problem no matter where the file was generated. Please note that all white rules appear actually to fine high resolution pdf file.

  If anyone has any bright ideas that would be wonderful!

  Thank you very much

  Sorry for the delay. As I said, I hate the tables, so it took me a few stabs to find the problem.

  You have a cell style applied to the header cells that is ambiguous as the overprint on traits. Change the style specifically quit the race of overlay box UNchecked.

• your print in Indesign consultant - work with high quality images

  Hello world

  I'm very curious about the idea of what the other professionals on printing and using Indesign to print.

  I'm working on a project that, with high resolution model and produces the images together.

  Since then, I had move the elements on the layout. Model and product images are in different layers in Indesign.

  I used Indesign to combine these images together to create ads for the magazine.

  However, I was told that it would be "More SURE" to combine the images together FRIST in photoshop.

  He thinks that the process should be:

  -Having an image of flated by products and model in photoshop first

  - then bring only one image in Indesign.

  -This way he could ensure the color will be good.

  What do you think guys?

  The places I've worked in the past, didn't like that makes things.

  I want to... *. Colors are not something we couldn't control what magazine uses their own print provider.

  What is your process to make sure that the color is just when priting a combination of different high resolution tiff files?

  Thank you very much for your time and knowleage.

  Lori

  Assuming that you have some sort of color in place management, I would continue to do it the way you are.

  But let's say that you do not want to follow the advice of this man. Here's what I think.

  Assemble the models and products on a Photoshop 'page' wraps doing the very large PSD file as there can be spaces between the models and products.

  Never, never flatten this Photoshop file. It is useless and makes a very complicated workflow if you need to make changes.

  You are right about the magazine printing process takes up colors.

  You send the magazine? A PDF FILE? It is totally useless to flatten then in Photoshop.

  The art is flattened in its own way.

  I suppose also that your products and your models are close together

• Blurry images when printing from indesign

  problems with only a few images in an indesign document. all images are placed and the original files are perfectly crispy pdfs... tried to change the display but performance always appearing and feeling fuzzy? When I click f8 on the image it doesn't show any IPP to all course if it means something?

  Help, please!

  Thank you, chrissy

  It could also have something to do with the fact that I have to swap computers to print the file - I'll take all the links with me and those that are appear blurry to see if that helps reissue of links

  Bingo.