Print photos of pc file not starting from a usb card

Similar Questions

• Satellite, L9W Click-Mini-B does not start from the USB flash key

  I have a mini click L9W - B.

  * What I'm trying to boot from a bootable USB key.

  I tried different sizes (1 GB to 32 GB), different manufacturers (without name and brand) different systems (for example. Linux distributions, rescue, antivirus, Acronis Rescue sticks), EFI sticks and non - EFI.
  All USB keys to start correctly on my computer desktop and even with my other laptop.

  * The Mini Windows 8.1 updated, the current version 1.70, in the BIOS BIOS are Secure Boot and TPM , which I've also tried a variety of combinations. The stick will be recognized in the start menu, the name of the USB device is displayed.
  I click on "USB", the Mini restarts, the reader is addressed (the LED flashes at the stick) is launched but not USB, but even once the HDD / SSD.

  If Windows starts, the key works fine. It matters little that, two USB ports, I use, or if the docking station is connected or not.
  If I restart Windows - settings - settings of PC - update / restore - restore - Enhanced start - use a device - try EFI USB Device, which is exactly the same thing happened.
  who can help?

  I hope that there are German support. -Hopefully, there are German-language support.
  If this isn't the case, please contact me.

  Message has been translated

  I don't know what is the problem here, but it turns out that it is certainly possible to boot from the memory stick bootable USB flash.

  Many users have been abele to boot from the memory stick USB external flash, but it is necessary to disable the secure in the BIOS boot option.
  Also if you want to install an unsupported UEFI system, the boot mode must be changed of UEFI in the CSM.

  by the way: it's English language community

• My C50 - B Satellite does not start from the HARD drive

  Details of the machine: -.

  Model number: PSCMLA-03F07Q
  Serial number: XE343127P

  Computer does not start from hard drive. No error message, just the start Toshiba at the end of self-test screen.

  Sometimes a reinstall of the operating system seems to correct the problem, but then he would go again, now the problem is consistent.

  I reduced the possibilities to a fault of BIOS, reasons.

  System boots from USB with no problems. Installation of operating systems is done without error. SMART hard drive data indicates a perfectly healthy hard drive. Memcheck will return no error.

  The obvious solution is to reload the BIOS, just reset it doesn't help. But that is the problem.

  1.4 BIOS update that the Australian site offers is a Windows program and the computer cannot start Windows.

  Obvious answer is to use a bootable USB key with an operating system 'live' on this issue, but all of these systems are Linux and the update of the BIOS is a Windows program. So much for smart solutions.

  Downloaded Bios version 1.7 of the European site but the iso inside the rar file is empty, 25 MB in size but nothing in there according to Linux. Tried to run his program on a Win7 64 bit computer and it returns an error that it could not find the correct iso file.

  I submitted a support request by email to Toshiba, but they believe that it could take three days to get a response, so I thought I would ask here as well. Can someone tell me please to a working copy of the latest BIOS update disk for a laptop Satelite C50 - B? Note: this model does not have a CD player so iso should be compatible with USB boot.

  See you soon,.

  Andrew.

  Hello

  From my experience that I n think that BIOS update is the final solution for you. When you set the default settings of the BIOS disk HARD appears correctly in the BIOS settings?
  HARD drive is also offered and listed as boot device when you enter in the start using F12 at startup menu?

  What happens when you start using recovery image installation created recovery USB key (I hope that you have created a)?

  Offer BIOS updates are versions of WIN and can be performed by running the Windows operating system.

• Portege R100 - does not start from CD player

  I have Toshiba Portege R100. I want to format and start all over again

  I use killdisk, excellent utility program, normally takes place the disc cd but the machine does not start from cd player, even when it is said in the bios, it says 'error of cable' & drive still works fine when the system is installed & running

  I want to remove unbuntu & just xp, thought that I would start plus-plus easy or simply to remove unbuntu?
  If remove unbuntu, how can I do this?

  Best regards, TIM

  Hey Buddy,

  If you want to have XP only, try to boot from a XP disc. You can format the drive HARD whole with XP disc that even Ubuntu is installed. I put t understand why you use another program to format the HARD drive

  Then boot from a XP disc and follow the instructions on the screen. If it doesn't work, it seems to be the material of your player to malfunction.

• CD player passes all tests but the computer does not start from cd player

  CD player passes all the tests, but the computer does not start from cd drive. entered the bios and it specifically indicate to boot from the cd drive. Windows 7 installation disc does not start. Win 7 disk works in another computer to start. Why is it not this cd player read the disc and from the win 7 installation process?

  I see this problem on systems having older IDE and SATA drives requiring firmware updates and assigned to the region 1 aka they boot from XP CD, but not DVD windows 7or media.

• computer does not start after installing video card

  I, m new here so please bear with me.  I have a PC HP Pavilion Media Center TV (m7434n) I'm trying to replace the video card (Nvidia GeForce 6200SE with Turbo Cache) in. I am trying to replace it with a Nvidia EVGA 8400GS. I delete all the nvidia drivers, make sure that the pci-e card is used in the implementation. I have then to remove the old card and install a new one. When I try to start the computer, fans turn on but that's all.  There is nothing on the monitor.  The computer does not start. I replaced the power supply bestec 300 watts with a new antec brand 430 watt power supply.  When I reinstalled the old video card, the computer starts ok. I tried to replace the video card with an ATI Radeon HD5550 too and it's the same thing (the computer would not start), reinstall the old card and it starts up fine. Any help would be greatly appreciated.

  Gary,

  You may have a compatibility issue with the ATI HD 5550 and 2006 PC model.  I've seen other posts where ATI 5xxx video card did not work in older HP PCs.

  When you are referring to the installation of the older video card do you mean going back to the integrated video card?  Moving the video cable to the card installed?

  Install the NVIDIA 8400GS and connect the video cable. Now follow the instructions for clear the CMOS.

• most programs now get error message "could not start from this location after a mail there is session 2 nite".

  After a session 2 nites E-mail there, many programs said message error "could not start program from this location. In addition, long delays after you clicked on a link, a large display hourglass for up to several minutes. Have tried to rebuild, but I think that the problem is still there. Any suggestions?

  What is a "mail session?

  What is, "have tried to rebuild?"

  Edition with Service Pack of Windows XP _ _?

  What anti-virus application that you use, and if she slept in day?

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you pouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.  This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• Photo Viewer Windows will not start

  My windows photo viewer has recently given the error code that it wouldn't start.  I tried to solve the problem by running the sfc/scannow.  The result: protection of resources Windows found corrupt files but was unable to remedy.   The viewer still does not start.  I Systime of operating disk that accompanies it by computer, but there is a warning on the disc, saying that the resettlement will erase all data and files from the hard drive.  All of the suggestions.
  Another photo program stopped working as well as the windows photo viewer.

  We will see if there is a problem with your file system.

  Go to start / accessories / Control Panel and right click on command prompt and click Run as administrator.

  Type sfc/scannow (Note space is inmportant) and enter and let it run.  It will scan and fix some of your system files.  If all goes well it will finish without error (let us know if it ends with errors, it cannot be resolved) then try your programs and see if they work now.

  If this does not work, try a repair/upgrade to systems level by bootiing on your CD of the OS.  Here is a link to some pointers on how to do it: http://www.vistax64.com/tutorials/88236-repair-install-vista.html. If you have SP2 installed on your system, you must first uninstall it for this process to work (and then download and reinstall when it's done). It is a much more complete repair process the command sfc (and may take a few moments).  Then again your programs.  If you have still the problem is probably with the program and not with Vista - and we can work on solutions so that if it becomes necessary (or refer you to another Vista forum that specializes in installation programs).

  Good luck. I hope this helps.

• HD will not start from host organization but will be of a different MBP

  ((Two Mbit/s: 1) mid 2010 i5 model 1) Middle model i7 2011.

  From here, I will call them as "i5 and i7.

  The i7 was having starting problems. The taskbar would charge about 2/3 of the way in which it would "hang up" then the screen turns off. Unsuccessfully trying to boot in safe mode. Verbose mode would freeze as well. Tried the single user mode and run ' fsck - fy "and it made no difference. No idea how fix permissions with the utility El Capitan disk but I'm not sure it would make a difference. Doesn't it?

  I then did a backup/clone of the i7 to a new external storage disk. All programs and files are successfully transferred.

  Then I wiped the i7 with a clear three-pass and reinstalled OSX.

  Error #1) I have not test to see if the hd now Virgin began its host computer before you restore the old files.

  Error #2) I put the clone on the i7 copy using Super Duper.

  When installing the i7 to its host computer, it wouldn't boot in any mode just as before.

  * Comment: The i7 will start the i5 laptop when connected via USB in system preferences > startup disk.

  I am currently using the i7 connected to the external i5 as I type this.

  Disk utility has been run on the i7 at this point by indicating zero problems.

  Onyx has been run through all the options and check marks with no problems.

  Always the i7 will not start its host computer.

  I am very confused.

  Issues related to the:

  (1) why/how this phenomenon occur?

  (2) in making the i7 clone for external storage, if there was a hidden virus or something on the i7 origin, is the now compromised storage device?

  I read it twice and I'm still a little confused.

  When you cloned the i7, you do it from the other computer?

  I get the i7 disc starts from the i7 computer when it is connected to the outside. Is this correct?

  If the player starts in an external of the i7 box, but not in the computer the case most likely is the SATA cable to the hard drive.

  Try to replace.

  Kim

• When my laptop battery died the printer stopped working, now does not start

  The laptop screen went black, (while a print job is in progress) I plugged in and restarted the computer.  Since that time there no task sent to this printer have been achieved. I had to go back to my old HP882C just plugged into the 2side Print Setup and finished work. HP C5580 had a task that will be

  not only cancel all print always not that hell has happened?

  Hello

  I suspect that when the battery is dead, the spooler has been altered.

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Print Spooler service
  http://www.blackviper.com/WinVista/services/Print_Spooler.htm

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------

  Also check with HP support and forums.

  HP support
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

• Satellite L300D - 12L does not start from CD/DVD drive

  Hello.

  I noticed a couple of threads on L3x who sometimes won't start but have a blinking cursor.
  I also have this problem with my daughter satellite.

  It occurs when there is a disc in the DVD player. The PC does not start, I get a black screen with a cursor and the DVD flashes regularly as if she is trying to determine if there is a bootable disc inserted.

  I tried several discs with similar results.
  Everything that happens the DVDRW ejects, and I have to force a shutdown, then eject the disc immediately when I start her for it boot on Vista.

  Any ideas greatly appreciated.

  Hello

  Have you tried to boot from the recovery disk Toshiba?

  Fact is if you try to install the Windows operating system on the new laptop series, you must install either the drivers SATA or you must set compatible SATA to AHCI mode in the BIOS!

  That's why check first before you would contact any ASP guy to replace the STRANGE.

  See you soon

• VM does not start from CD/DVD

  Hello

  I just finished installing Hyper-V on my windows server 2012 and I created my first VM. I try to install the operating system of the CD/DVD drive, but it does not start. It displays "Boot Failure. Restart from a proper boot device... ».

  I tried setting up another server in the same way and the virtual machine on the other server also shows the same error.

  I have the CD as first option in the BIOS to boot. I have only one CD drive on my server that I put my VM to start stand with.

  So, what could be the problem?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• "Make window film can not start because your video card does not support the required level of hardware acceleration when you make a movie in windows vista Photo Gallery

  Original title: Hello. I have usedd to make a movie using Windows vista window photo gallery. Now, I can't. could you please help me

  Hello. I used to be able to make a movie using Windows vista window photo gallery. Now, I can't. could you please help me

  That's how I did.

  Open a pictuer using the photogallery.

  I have in the photo gsllery window, click make a movie tab.

  with this click it used to drive me to another window, but no more, instead ii have a message: make movie window cannot start because your video card does not support the required level of hardware acceleration or hardware acceleration is not available

  Hello

  
  Were there any changes (hardware or software) to the computer before the show?
  
  Method 1: Optimize the hardware acceleration and check if the problem persists.
  a: Click Start > Control Panel > display
  b: click on change display settings , and then click Advanced settings
  c: click the Troubleshooting tab, and then click on change settings of
  d: make sure that the slider hardware acceleration is set to full, and then click ok.
  
  Method 2: update the video drivers and check if the problem occurs.
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Method 3: Perform the steps in the article mentioned below and see if the problem occurs.
  http://support.Microsoft.com/kb/923122
  
  Hope this information helps.

• Left without head does not start from the phone.

  Hello

  I have a problem with the part without a head.

  When I try to launch the app to Eclips, the app will be charged for phone and rotate the UI and parts without a head.

  Now if I restart the phone, headless part does not start even when I open the UI part,

  The headless part is to call the block function.

  Any idea will be very appreciated!

  Thank you!

  Your HL will start automatically in these two scenarios:
  (1) the application is installed on the device (there is no front)
  (2) the phone is restarted-> which is the magical part where your file bar - descriptor.xml is to record your target without head to call when the OS up bb.action.system.STARTED action.

  If you want your HL to be launched at the start of the user interface, you must manually call.

  Look here for an example of coding:
  https://github.com/RodgerLeblanc/HeadlessLight/BLOB/master/HeadlessLight/src/applicationui.cpp#L34-L...

• Organizing element does not start from the 12 EP welcome screen

  Organizing element refuses to boot from the first item welcome screen 12. I had the same problem with PSE12, which was solved by systematically starting from the taskbar. I failed to get the screen of welcome to PSE12. Ss12 and PSE12 parpadean normally also. I could produce a film without difficulty. Pluggable 8.1 Windows on an ACER Aspire 8920 32-bit with 4 GB of memory. Although having as bought PSE12 and ss12 together I only install ss12. Plug-in these Adobe products for several years.

  My catalogs are all in C:\Users\All Users\Adobe\Elements Organizer\Catalogs.

  Drag-VId

  A few considerations...

  1. How did you get your 12 elements Photoshop and first screens welcome of the 12 elements that set up

  First elements welcome screen

  

  2. If you open first elements 12 to the Expert workspace and click the Organizer tab at the bottom of the workspace Expert, can you open the workspace elements Organizer 12 from there? If you add multimedia/Organizer items, it works?

  3 have you tried to delete the elements Organizer 12 parameters to remedy any malfunction of the elements Organizer?

  Local disk C

  Users

  Owner

  AppData

  Roaming

  Adobe

  Elements Organizer

  12.0

  Organizer

  and in the record of the Organizer is the file psa.prf that you remove or disable. Folder Option show hidden files, folders and disks should be used to see the full path.

  Please review and then let us know of your progress.

  Thank you.

  RTA