Print spooler is disabled, how to turn on?

Similar Questions

• My A940 dell printer spooler is disabled. I don't have how to restart it. Please help PS I have awindows XP 32 PS my e-mail is _ @_. ___

  My A940 dell printer spooler is disabled. I don't have how to restart it. Please help PS I have awindows XP 32 PS my email is * address email is removed from the privacy *

  The people who answer questions here are, for the most part, volunteers who have no connection with Microsoft.  Ask your question every two minutes won't get you a faster response.

  Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:

  AntiMailware MalwareBytes
  SUPERAntiSpyware

  Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

  Cleaning of printers

  NOTE: If after completing step has the spooler print don't rest not always running after you launched the command "net start spooler", follow these steps

  Open a command prompt window (start > run > cmd > OK)
  Type the following line in the black command prompt window
  dependent on the spooler of sc config = RPCSS
  net start spooler

  If the spooler still will not start, you will not be able to follow all the steps in "First Article".  Instead, go to the other link and download and get and use the utility 'cleanspl' such as described here.

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.  If you have (or had) a Lexmark printer, follow the instructions on the following site before installing the new drivers, as explained in its first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

• print spooler is disabled.

  print spooler is disabled. Press services and unchecked Internet printing client, checked LPD and LPR 30 minutes later, I'm still waiting for patterns to be complete! Help

  Hello

  1. have you made changes on the computer before this problem?

  2. do you get any error code or error message?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the fixit from Microsoft Fixit article and if that helps.

  Diagnose and automatically fix problems printing and printer:

  http://support.Microsoft.com/mats/printing_problems/

  Method 2:

  Try to restart the print spooler service manually and check if it helps.

  Follow the steps to restart the print spooler service:

  a. open administrative tools by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.

  b. double-click on Services.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. right-click on the print spooler service and then click Properties.

  d. on the general tab, next to startup type, make sure that automatic is selected.

  e. If the service is not already running, under Service status, click Start and then click OK.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For reference, see the following Microsoft article.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Method 3:

  Try the steps in the following Microsoft article and check if it helps.

  Printer in Windows problems:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Hope the information is useful.

• DeskJet 3050 has J611Series: HP Print service is disabled - how to activate it?

  I'm trying to print from my Samsung Galaxy Tab S, SM-T805. Under settings: connectionsprinting, I see the HP Print Service Plugin is turned off, and by clicking on the icon displays a screen that tells me that the service is disabled. There's no obvious way to turn it on.

  When I followed a link on the same screen to download an app playstore, HP Print Service Plugin box is there, with a beat in a box to the right of the btm, but when I open it, I just see the uninstall option - not install or update, so I guess that the version I have is the latest. I actually uninstall, then reinstall, but no change.

  So, how can I activate it? WiFi is turned on, the printer is offline.

  In Applications, I select the plugin that shows the version 2.8 - 1.5.0 - 10F - 16.1.16 - 71.  Apparently, there is no button to activate it.

  If I understand well there is not a core function, and I do not wish to use the cloud at all.

  Looking for one suggests this is not an unusual problem, but I have not found a solution so far.

  Any ideas please?

  @silverman166, I'm just looking at your post and hoping that I might be able to help!

  I'm working on a Samsung Galaxy S5, Android 5.0 Lollipop so I hope that you will be able to follow the screenshots.

  As you have already mentioned you downloaded service of HP Print plugin via Google game store, so all the options at my disposal should be the same for you.

  (1) in the settings for 'Print' in the section scroll to connect and share

  (2) select the printing to HP Service Plugin

  (3) in the upper right corner, drag the glider to the right to activate the plugin.

  4) press OK

  (5) your HP Print Plugin should now be enabled.

  

  Hope this helps you activate the Plugin HP!

  M.

• 962 Printer Spooler Dell all-in-One turned off.

  When I try to print, it comes back with the spooler is turned off.

  Then I find that it does not find the printer to print.

  However, I can scan from the printer to a file and that works very well.  The fax seems to work, too.

  I have unplugged, rebooted the whole system several times.

  I inserted the original disk and reinstalled the printer thinking that a driver is missing.

  I have Windows 7 and nothing has changed so far.

  Solution?

  I suggest that you see the advice of PudgyOne in this thread of community Dell:

  http://en.community.dell.com/support-forums/peripherals/f/3528/t/19306940.aspx .

• Mac Book printer spool queue full - how do I clear?

  Regularly my B210e printer does not print.  I select my printer in system preferences - ready to print.

  When I type comand print screens of the printer says printing and then stops (sometimes the screen indicates the full spool area)

  get on slow printer then suppresses printing of the message and puts the printer idle.

  Called HP representatives paid for the advice has spent 7 hours run disk first aid - check & repair permissions Mac utility

  Verfied OK disc worked briefly

  Unplugged printer many times to clear.  In the past which would help - now, nothing works

  Hi nwsnobird,

  

  It's wonderful to hear!  I am very pleased that you are in service again.

  If you agree, you please mark the post with the "accepted Solution" so that others can find it?  Please and thank you.

• How can I get a print spooler for jet Office 6500 E709n

  somehow my print spooler is gone how can I get a new one, I ran the installation, diagnosis and utility and no doesn't solve the problem. I can see the printer on my wireless network but cannot print on it

  If your PRINT SPOOLER IS 'GONE', you may need to contact WINDOWS for that matter. I would check everything first well.

  What operating system do you use? If windows 7 or XP, follow these steps:

  1. click on Start Menu
  2 right click computer
  3. choose MANAGE
  4. click on Services and Applications
  5. choose the Services
  6 scroll down until you see PRINT SPOOLER, if it is there, click on it and RUN it

  IF you DO NOT SEE what LIST, you will need to communicate with WINDOWS, because you have to maybe reformat your OS, but contact them first.

  Let me know if this can help, thank you.

• Printer Spooler issues, windows 7

  I keep reading post after post on the people of issues with the printer spooler and windows 7 and its boring there is no real difficulty.

  OS: windows 7 Home premium 64-bit

  printer: lexmark prevail pro 705

  The question I have is that when I print something, the first document prints just fine and he disappears from Quebec, but if I try to start another print job hangs in the printer (Que.) If I restart the printer spooler I just send the print job will be printed by the printer, but in the windows that the new job always appears at the bottom right "" 1 to print for freddy "." If I try turn off the printer, while there is a document in the print windows that work, the printer does not stop until I stop the Printer Spooler service (by stopping or turning off my computer).

  I reinstalled the printer drivers. I deleted the files in system32/spool/printers / (after that I stopped the Printer Spooler service). I connected the printer by USB on my computer and tried to use it as a printer network through my router. I have the latest firmware for my printer. My version of windows is fully updated. The Printer Spooler service is launched at windows startup and does not crash / stops randomly unless I have stop myself.

  Any ideas? Something is suspended and his associates for the Printer Spooler service. If more details are required, please ask.

  Hello Fred,.

  I understand that you have tried to uninstall and reinstall the drivers for the printer, but try to completely remove the printer from the system and see if the problem can be solved:

  Delete the printer driver

  ===============

  1. click the Start button, type PRINTERS in the start search box and press on Enter.

  2. right click on the printer and select Remove.

  3. click on the Start button, type APPWIZ. CPL in the search box and press ENTER to launch the "programs and features".

  4. try to uninstall all printer related software and utilities.

  5 restart the computer.

  Clean the driver of the registry information:

  ================================

  Before going further, please back up the registry first.

  1. click on Start, type REGEDIT in the Start search bar and press enter.

  2. Select my computer (the root node) in the left pane, click export on the file menu, choose all under Export range, select desktop in the Save in box and type backup in file name. Click Save.

  Please Note: the backup file is on the desktop and named backup.reg. We can simply restore the registry by double-clicking the backup.reg file.

  3. click on 'Start', enter "regedit" in the search bar, and then press on 'Enter'.

  4. navigate to the following registry key by clicking on the sign PLUS (+) sign:

  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Print\Printers

  5. click on the PLUS (+) to expand printers key sign. All current printers installed on your computer are listed. Please right click on the subkey of the problematic printer inside in the left pane, click on 'Delete'.

  6. navigate to the following registry key:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Drivers\Version-3

  7. click on the PLUS (+) to expand sign 'Version 3'. All printer drivers that have been installed on your computer it will be there. Please, do a right click on the subkey of the problematic printer in in the left pane and click on "Delete".

  8. close the registry editor.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Backing up the registry
  http://Windows.Microsoft.com/en-GB/Windows/back-up-registry#1TC=Windows-7

  Clear up the driver information in Safe mode

  ====================================

  1. reboot your computer in Mode safe. To do this, restart the computer; Keep the F8 key until the Windows Startup menu appears; Select "Safe Mode"and press "Enter."

  Note: Display of in Safe Mode, your system and the Bureau will look and perform differently than in Normal Mode. It's only temporary.

  2. click on the Start button--> computer and look for the folder, remove all files in the folder.

  C:\WINDOWS\System32\Spool\Drivers\w32x86\3

  3. restart your computer in Normal Mode.

  4 Please reinstall and add printers.

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• After restarting my computer, it says to install a print spooler

  After I restarted my computer, it is said to install a print spooler, what and how are you?  I have been using this set for 4 years with no problems.

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Perform the steps mentioned below and see if it helps.

  a: go to "Start", then click on 'Control Panel'.

  b: Double-click on the icon "Add / Remove Programs" of the control panel.

  c: click the 'Add/Remove Windows components' present on the left side of the dialog box Add / Remove programs

  d: Click to select the option "other network file and Print Services" in the Windows Components Wizard.

  e: click "next," and then wait until the course ends.

  f: Restart the computer for the changes to take effect.

  g: Go to "Start", then click on ""run. " "

  h: Type "msconfig" (without the quotes) in the Run dialog box and press on ""Enter. " "

  i: Click on the ""Services " tab in the System Configuration Utility dialog box."

  j: Click to select the check box 'print spooler' below 'Service.

  k: click "apply", then ""OK. " "

  l: restart the computer.

  Hope this information helps.

• My printer is not displayed and I can not open my printer spool for repair.

  Original title: my printer is not displayed and I can not open my printer spool to fix, how do I solve this problem?

  My printer is missing, when I try to open my printer to print something I get an error message saying to restart my printer spool and I when I try to open my printer spool window is empty.  My printer isn't appearing any more, all of a sudden I can't print more.

  Hello

  1. You did any recent changes that caused the problem?
  2. What is the brand and model of the printer?
  3. What is the exact error message?

  Method 1) run the printer Troubleshooter

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Method 2: Follow the instructions in the link:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  It will be useful.

• Printer Spooler stopped working

  original title: Printer Spooler problem

  How can I fix my printer so I got the message spooler subsystem app stopped working and was closed?

  Hello

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Print Spooler service
  http://www.blackviper.com/WinVista/services/Print_Spooler.htm

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

• just installed my printer today. was working fine and then got a message error that says "print spooler is not activated" or something like that. How do I turn it on? I tried to understand for 30 minutes... Help, please!

  help to turn on print spooler

  Hello Bubbalooloo,

  Thank you for your message.  To enable the print spooler, please follow the steps below:
  Click 'Start' > right click on 'My computer' > select 'manage '.
  Click the (+) sign next to "Services and Applications" > click on "Services".
  On the right, scroll down to and double click on 'Print spooler' > set the startup type to "Automatic" > click on 'Start' > click 'Apply' > click 'OK '.
  This should not only start your spooler in this instance, but now he has to start each time you start your computer.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Print spooler not turned on do not, how do I turn it on?

  I did a search print spooler, but when I try to open it with windows search, nothing happens.  Troubleshooting repeatedly tells me that my printer does not work because it is turned off.  I tried to uninstall, but impossible to reinstall without the print spooler on.

  Type services in the start search box, press on enter.

  Go to the bottom of the list of print spooler and click on start.

• How to remove dependencies on LexBce server using Vista print spooler.

  I am installing a new Canon printer and I get the error spooler.  I uninstalled older Lexmark printers, but the print spooler service is always dependent on the LexBce server.  How can I remove the dependencies or the LexBce server?  Some would like to help... Thank you.

  Hello

  It can be fixed by removing the Lexbces dependence. To remove it properly follow the instructions.

  • Right-click on my computer , and then select Manage.
    
  • In the window, click Services and applications and click service.
  • In the list on the right search lexbce server and disable it.
  • Then, find the print spooler service. Turn off too.
  • Quit the application.
  • Now go to Start Menu > run.
    
  • In this dialog box type or copy paste the following command [ of the sc config spooler depend = RPCSS ] without brackets.
  • Click OK.

  I hope this helps.

• How to turn off filtering to connect to a printer by MAC address?

  original title: MAC address filtering?

  I'm trying to connect an hp photosmart wireless on my new computer printer, a print says that if I have active filtering by MAC address I should add to my list of devices allowed for wireless router. I am a beginner and do not MAC how to turn off the printer.?

  All devices in the world that can connect to a network has an address unique identification enter the MAC address.  (This has NOTHING to do with Apple products - although they will also have mac addresses.)

  Your printer will be on documentation and probably on the box.

  Most routers have the ability to allow only the addresses specified MAC communicate through the router.  If you do not have this filtering enabled in your router then you need do nothing.  If you have enabled mac filtering, then you must type the address of the printer in the appropriate in the router configuration page.

  There is nothing on the printer '' disable'. (sic)