Printer all-in-one Officejet 6500 has

Similar Questions

• Can't find model number, installation instructions for the unit duplex for printer all-in-one Officejet 6110

  MY friend gave me a duplex unit to another printer 6100 series he had. We thought that it would be compatible. The HP site says that my all-in-one OfficeJet 6110 can use a duplexer, but that's all he says: no model number and no installation instruction.  Does anyone have any info or suggestions? I can't know just by looking at my printer.  (The duplexer No. FPU is C9101A).

  Thank you!

  To install the duplexer, you must remove the rear blankpanel of your OJ 6110.  The rear panel will be approximately 9 "wide and 4" high with two s tab that can be moved together in the output panel.  Snap the duplexer in place once it is removed.  Make sure that it is oriented correctly, the label must be on the bottom.  Use large buttons on the ends of the duplex unit to release the duplexer if it is to be removed or moved.

  With the duplex unit installed, you will need to configure it so that it is recognized by the driver.  See the post here for more information on activation of the duplexer.

• Officejet 5610: Printer all-in-one Officejet 5610 laptop

  Until yesterday, I had the printer all-in-one HP Officejet 5610 installed on my PC (Windows 7). Now he's disappeared! When I try to install a new driver, it seems to download and install, but I'm not and it does not appear in devices and printers.

  Hi @Casona,

  Welcome to the Forums of HP Support! I see by your post that the printer does not appear the window devices and printers, even after reinstalling the software. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I would say to restore your computer to an earlier time when everything worked correctly, System Restore for Windows 7

  Please let me know the results and if there is anything else I can help you. Thank you.

• printer all-in-one Officejet 4620

  Looks like the 4620 printer has the same problem of restart with most everone. -That someone has a fix for this problem

  Hello dennis1938

  I understand you are having problems restarting your HP Officejet 4620. I want to offer my help in this case. The first thing I want you to do, would be for you to follow the steps in the HP Support document: The HP printer will not start up, or answer. Once you have the printer started, I would make sure that you have updated the firmware of the printer. You did not post what operating system you are running on your computer, but you can get the update of the firmware via the page HP Officejet 4620 e-all-in-one of the printer drivers . It is enough to select your operating system from the drop-down list box and click on 'Next' once that refreshing the page just scroll down and click "Firmware". Click Download and follow the instructions to ensure that you are running the latest version of the software for the printer.

  This should solve your problem with your printer. Thanks for posting this topic on the Forums of HP. Have a great day!

• Of Scanner all-in-one Officejet 6500 problems

  Hello

  I have a brand new Officejet 6500 that prints, faxes and copies without fault.  It is connected wireless to two different computers.  However, for the life of me, I can't scanner at work - and the errors are the same on both computers.  No matter what I do, the scanner software opens and begins to work, but the scanner itself doesn't do anything (no noise, nothing) and eventually I get message and error that says "Scanner Error" with a bunch of steps to try to fix.  I tried ALL the steps, restart the software, reset the printer, unplug, re - connect, re-boot and even re - install the software - still nothing.  Once I even put in place via a USB cable just to make sure it wasn't a wireless issue, and is not; I had all the same mistakes.  I spent two hours on the phone with HP tech support and after changing a bunch of firewall and other security settings, still nothing.  I don't have anythign fancy; just Windows XP, Windows Firewall, McAfee Suite.  Any idea what could possibly be the cause of the errors of the parser and why there is no communication between the computer and the scanner?

  After countless hours to suck his soul troubleshooting with alleged HP 'Technical Support', at least I managed to reduce this problem down myself and find a solution that works.  I found that the problem of scanning don't occurs if the printer OR the computer is connected to the wireless network.

  The solution is to TURN the wireless RADIO and connect to your network via an ethernet cable.  Then try to scan with a computer that is connected to the network via an ethernet cable.  Note that this will NOT work if each connection - printer to the router - or computer to the router is connected wireless; It takes the two connecitons via an ethernet cable.

  This is obviously a software problem that HP does not and will never be resolved.  So, if there is no way to connect your AIO to your router with an ethernet cable (for example, if the priter is in another room), you're SOL and should probably try another printer that HP will never solve this problem.

• Printer all-in-one Officejet 5510v

  My HP Officejet 5510v all-in-one printer fails to print from my computer, with an error message indicating that there is a jam. I tried to delete but cannot find any paper jam or carriage jam. I can scan, copy without problem. I can not even go to the "setup" button and type in 1 4 and print a test without problem page. But whenever I try to print something from my computer, I always get the error message. What can I try to fix this problem? Thank you, Tim

  Because the hardware seems to work fine, not related a jam, the software may need to be uninstalled and reinstalled. I would like to just give a try.

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=32745&tmp_task=useCategory&cc=us&DLC=en&lang=en&LC=en&product=311261

• Printer all-in-one HP 6500

  Thinking of buying a HP 6500 all-in-one printer, but cannot tell if you can lift the cover to make copies.  Can someone let me know?

  Thank you!

• Printer all-in-one screen display has changed from his usual display of a broader look "safe mode".

  When I click on the all-in-one printer, it happens on my monitor screen different than what it allows.  Now, it seems that it is in "safe mode" and I'm not able to use its features as before.  Why is this happening and how can I get this back to its original state?

  Hi Doris Workman,.

  1. What is the brand and model of the printer?
  2. are you referring to the computer screen or the printer?
  3. what function you are trying to use?
  4. don't you make changes to the computer before the show?

  If you are referring to the screen on the All in one printer, then I suggest you to contact the manufacture of the printer.

  Provide more information to help you best.

• Printer all-in-one Officejet J6480 prints the document leaves "error sent to printer" message in what.

  I have an officejet 6480 connected wireless that I print from a connected computer eithernet running Windows 8. When I print a document from various (Notepad, adobe, outrlook, etc.), the document print OK, but I find myself with a message in Quebec under the State that says "error - sent to the printer. 8/2 is listed under pagesand I print a two-page document. I ran HPSSdr and it shows errors found and it erases Quebec, but the next time that I print, I have the same problem. The printer is connected to an Actiontec PK5000 without wire/eithernet DSL modem/router. It's a router securred with a WEP password. When I do a test print from the HP software it erases OK, but she let the other message in the what. I also ran SFC/scannow, which did not find any problem.

  The problem seems to have corrected itself. I did a system restore to before the updates required and still had the problem. I reinstalled the updates that have been deleted and the problem seems to have disappeared. I had to turn and then turn the WiFi printers because I received a message to unavailable printer. After all what it seems to work now.

• How to fix a carriage jam on a printer all-in-one Officejet 6700 Premium

  Never get a carriage jam and can't get it figured out? Here is a video and a document that can help you solve the problem.

  Many times transportation jams came from a piece of paper crashes and the transport again slams the paper and cannot go completely backwards. The video shows how you can get a jam and a few steps to get to the jam and fix it.

  http://www.YouTube.com/watch?v=nV59MGyoIcQ

  Another useful source might be this document below. It has the same steps, but it can also be useful.

  http://support.HP.com/us-en/document/c03079130

  Hope this helps let me know if you have other questions about a carriage jam.

• Why my HPavillion keep crashing when I try to print using my HP Officejet 6500 has more using the USB connection?

  I tried to update the driver, but couldn't.

  Hello

  1. do you receive any error messages?

  2 have you made any changes to the computer before the show?

  3. who is the operating system installed on the computer?

  4. is this problem limited only when connecting the printer via USB?

  5. what happens when you try to update the driver?

  Run the Fixit and perform the steps mentioned in the article:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  I suggest you provide more information about the issue so that we can better help you.

  I hope this helps.

• How to print from my ipad to the officejet 6500 has more?

  I read that there may be something else than necessary. I want to print directly to the Officejet 6500 has more. Apple said ths is an Air Print printer able to do this. I don't take this monster out of the box until I know he will do what I want without a lot of trouble. Thank you.

  OK, so you were talking about requiring the update.  It is difficult to say that all depends on if it came with the new firmware or not.  It is not really relevant, however, because it will be updated as soon as Web Services.  This process takes a few minutes.  There is no computer necessary for the update of the firmware as long as the printer has internet access (which is directly connected to a router via ethernet or wireless).  Yes, a connection ad hoc, you will be able to print from the iPad, but you can use its 3 G connection instead of through your router.  It can only support a single WiFi also.  Go ahead and set up the printer and keep me posted on what happens.

  BTW - what is the problem with your PC that it cannot access the internet?

• All-in-one Officejet J6480: printer Officejet J6480 on Windows 10

  I've owned a printer all-in-one Officejet J6480 for a few years.  I bought a new Lenovo computer several months that came with a free to Windows Update when 10 is which would be published.  I managed to load the J6480 software and everything worked very well, including the scanner.  When Windows 10 came out I upgraded to it and rebooted the printer software and everything worked fine.

  Then about two weeks ago, all the J6480 would do is printed.  When I tried to open the HP Solution Center to scan a document all I had was a 'ping' and the Center does not open.   So I tried to remove all the HP software and re - load.  It would be the load but not completely.  I kept getting the message that "the application you are trying to use has been blocked to open because it could damage your PC or the loss of data. This is because some applications that worked with a previous version of Windows may not work the same way with Windows 10 ".  I do not understand why it worked fine for a few months with 10 windows and now it's incompatible, unless there was an automatic upgrade (Windows 10 or HP) that is now causing the conflict.

  I've uninstalled and reinstalled the software several times but to no avail.  Can anyone suggest a solution?

  Hello

  Please check your history of updates of Windows 10 and remove/uninstall kb3132372

  Note: Microsoft is working with Adobe now:

  https://support.Microsoft.com/en-us/KB/3132372
      
  To uninstall this update, click Control Panel, click System and security, click on view installed updates in Windows Update, then select in the list of updates.

  Kind regards.

• Cannot sweep the all-in-one Officejet 4630

  Hi all - help needed please.

  Recently bought a printer all-in-one Officejet 4630 and had nothing but trouble, set-up and use it. After several attempts to put in place, everything is roughly in order, though I can't yet scan of the control on the machine Panel (I can scan only through "system preferences" under the apple icon).  Whenever I try to scan the engine control panel (and not through system preferences), using either the wireless network (Airscan or whatever it's called) or the USB cable, I have the following message on my laptop screen:

  Task is not available

  The task of "Photo (JPEG)" found on your device is not available on your system. Please select another task.

  The same thing happens if I try to scan to PDF. I use an old (c.2007 MacBook Pro) that runs the OSX10.9.5 Mavericks. Internet connectivity is not a problem because we have the right cable broadband. All I want to do is scan directly from the printer to my computer, preferably using a wireless connection. Help, please.

  Thank you

  Hi @nckbtlr and Happy Halloween!

  I'm sorry to hear about the problems you are having with your Officejet 4630. I understand that you are unable to scan from the front of the printer. I'd be happy to help you with this.

  In the spirit of Halloween, first I have to ask: what did the Mummy to tell the Agent from HP Support?    Let's wrap this case up!

  I suggest to uninstall and reinstall the software. Please follow the instructions below to complete a more comprehensive uninstall than basic uninstall. I know that these steps look long and convoluted, but I made it easy to follow and have confidence that these steps will solve the problem.

  Scrub / uninstall

  • Open the Applications folder > HP or Hewlett-Packard folder > Uninstall HP
  • Click continue, click on one of the printers in the list.
  • * Only perform this step if you have not all other HP printers.  Press and hold the Option, control and command, while now the three buttons.
    
  • Click Uninstall.

  Reset the printing system

  1. Click on the Apple icon ( ), then click on System Preferences.

• Unable to get double printing to work. new HP Officejet 6500 has e-all-in-one.

  Impossible to get double print to work after you have installed the duplexer to my new HP Officejet 6500 has e-all-in-one.  I can't find where I can change to double-sided printing in the soft ware.

  ShlomiL wrote:

  This is false,

  You should contact the dept store as was provided with misleading information.

  Below you find the accessories compatible with the Officejet 6500 a.

  As you can find in the list, the duplex accessory is suitable only for HP Officejet 6500 a more e - AiO - E710n:

  http://support.HP.com/us-en/document/c02492482

  Kind regards

  Shlomi

  Thank you very much

  Ron