Printer detects problems

Similar Questions

• Printer installation problem. Watch is printers and fax machines, but does not print

  I had to move my printers due to a collapse of the motherboard.   I moved my HP DeskJet 710C from a computer (under XP SP3, through LPT1:, where he was part of a network home and works very well) to another computer, also under XP SP3 on the same network, but who doesn't have a printer port.   I replace the cable with a USB printer and I tried to install if via a port USB001 printer.   The machine seems to install the printer (manually - it is not automatically find) and it shows in the printers and Faxes folder.   However, it does not print.   Any document disappears into the other, is not listed as a document to print, but it does not reach the printer.    I did everything I can find listed on the HP web site and run the FixIt program nothing works.   A search for network printers, are looking for a printer, provides a list, of which some are listed as invalid.   I think that I had uninstalled to printers to my computer until I tried to install this printer.   Now, I wonder if these "invalid" entries are mucking up of my installation.   How can I remove 'Invalid printer' names in my list of installed printers.   It seems in any simple way.

  I have my sure others must have had similar problems, but I can't find it on the net.

  Any help would be welcome.

  Thank you

  writing in the new message: * e-mail address is removed from the privacy... *

  Thank you, Tom,.

  I have found no useful HP support. They seem to only want to buy a new printer, but if I can't install my old I'll be able to install a new one? Or > when you think that you download using them, you actually download scanning for the third-party driver software, which has then finds all kinds of driver problems > and wants you to pay to get them replaced or updated.

  This isn't HP; That's the scammers try to sell you anything for an exorbitant price.

  As the computer receives automatic updates from Microsoft and works well otherwise, I do not trust software that detects problems everywhere in my machine. Or am I > stupid? Or is it driver/driver scanner software update that you can trust?

  Most of the pilot sites is not trustworthy. I used Device Doctor and found useful. There no drivers to download IIRC; It just tells you that drivers must update and where to find them. Here is an article on this subject (and no, that Thomas is not me):
  http://mintywhite.com/software-reviews/maintenance-software/device-doctor-totally-free/

  I'm still a little worried about 'Invalid printer' entries in my system network and feel that if I could get rid of them, I could make progress. When I try > print (via USB connection) my wireless network camera flashes with enthusiasm, typical activity out via the wireless network. The file is certainly went > somewhere, because it is more listed as a document to print.

  What printer you put as a default? This should be where the printed document (Word of the device - expected :-)).

  SC Tom

• HP Officejet Pro 6830, model 6: print head problems

  Have an Officejet Pro 6830, model 6835.  Error message received saying this printer had print head problem.  Also the error code oxc19a0020.  Troubleshoot-carried out every day to solve the problem without success.  Reset, change cartridges, activated and deactivated (including source) and nothing has worked.  Bought on 23/04/15.  Only three months old.  Help!

  Hi, I would advise to call HP support immediately about this, as it is likely that you will need a replacement printer.

  Can you please let me know how you go?

  Thank you

  Ciara

  

• J4580 print cartridge problem: [Tri-Color] refer to the device Documentation

  Well, I'm starting to feel like I knew better, buy another HP printer after dismal luck with two all-in-one before.

  My J4580 already gives me headaches after only 6 or more months of use.

  The unit refuses to print, declaring "print cartridge problem: [Tri-Color] refer to device Documentation to troubleshoot."  Nothing in the help documentation.  The Habs is always 90% full.  Sometimes pulling the Habs and placing back in crazy wil it restarting.  When it restarts, it prints perfectly.

  I tried the ubiquitous "clean the contacts" and other instructions help generic that I saw, but those who were without help.  The "Solution Center (Yes, good)" appears and all ithas is a link to buy more ink (!).

  Someone has an idea?  I'm about to throw it through the window of stores office, given that I can't throw it out the window of HP.

  Thank you!

  Yes * I know * and I'm sorry that I forgot to come back here.  I had a major system crash and I had to reinstall a lot of drivers for my multimedia player, GPS, and printer (!).  As this occurs, the device did not return this error - touch wood.

• Printing printer F2480 problem

  Hello

  I am using HP Deskjet F2480 and problem on printing. I used the HP Print and Scan Doctor 4.6 software to diagnose the problem.

  The printing result is as below:

  

  The words, black gradient and the black lines are having to "shadow".

  I hope someone can guide me how to solve this problem.

  Thank you.

  Hi @noname9,

  Welcome to the HP Forums!

  I see that the words, black gradient and black lines have a 'ghost' with your HP Deskjet F2480 effect. I'm happy to help you!

  I suggest to go through the steps in this guide, HP Deskjet F2400 all-in-One Printer Series - troubleshooting print quality problems.

  I hope it's useful!

• print head problem Officejet 8500 has

  Hello

  I just replaced all my ink cartridges, and still it tells me that there is a printhead problem; the message says to replace the printhead to resume printing.

  Didn't I do it when I changed the ink cartridges?  Visual instructions on the printer seems to show a slightly different model of what I, and the print head seems to be separate.  It does not have to be the case in my model.  Anyway, the instructions also say press the button 'change print head' in the main menu, I can not even to the main menu but it is stuck on the message "print head problem".

  I'd appreciate some advice on how to proceed!

  Thanks in advance!

  

  This picture help?

• Print head problem

  Hello

  I followed the instructions for print head problem for my HP Officejet Pro 6830. However when I tyr to connect a job I get the text next message "this product is is more served by HP." You can search for possible solutions on this Web site. »

  What can I do else?

  @Anniepannie17, try this url.

  http://WWW8.HP.com/au/en/contact-HP/phone-assist.html

• HP C5180: Printer color problems

  I have a HP C5180 printer and printing color is messed up. My black watch diagnosis page than black, yellow-green with yellow strips, Lt Cyan shows as a dark cyan, cyan is white, Lt Magenta is dark blue, Magenta is Lt. blue. Anyone know how to fix this... I changed the printer cartirdges... the same problem. I cleaned the print heads. several times and followed the suggestions on the tech support pages. I would not only use this printer as a black and white printer.

  Hey @TomTwist,

  Welcome to the Forums of HP Support!

  I would like to help you today to solve print quality problems you are having with your HP Photosmart C5180 all-in-One Printer. Because you have already replaced the ink cartridges and clean the printhead several times nothing is done, there is a good chance to have a defective print head. The print head is what reads the cartridge and puts ink on the page. On your print head template system is a non-replaceable part. Therefore, should that do not pass part a replacement of the entire unit would be necessary. However, I would like to go through the following steps to conveniently solve this problem of quality.

  I won't make you run any printhead more clean. The rule is usually 2 or 3 clean makes no difference at all, don't make a fourth because when you clean the printhead system it uses ink in order to rinse the ink system. If 2 or 3 clean make no difference that you're just wasting if you run a clean more.

  Step 1: Calibrate the colors:

  1. open the printer Toolbox: HP Solution Center. This should be on the desktop of your computer.

  2. If you have more than one printer installed, be sure to select the correct printer tab in the HP Solution Center

  3. click on settings

  4. click on print settings.

  5. click on printer Toolbox.

  6. on the device Services tab, click color to calibrate, and then follow the instructions on the screen. The procedure takes about two minutes and requires two sheets of paper.

  Source: The printed colors are not colors should

  If the problem persists, please continue to the next step.

  Step 2: Align the print head:

  1. click on HP Solution Center's on your desktop

  2. click on settings.

  3. click on print settings

  4. click on printer Toolbox.

  5. on the tab Services of device the printer, Toolbox, click align the print cartridges, and then follow the instructions on the screen.

  Source: Streaks or lines in the printed Image

  Please test print once these two steps have been taken. If the issue of quality still persists, because you have already replaced your cartridges the next step would be a replacement of the entire unit.

  If you want to explore additional options available for your printer, I suggest you contact the Technical Support queue by phone.

  HP Technical Support can be reached at the: 1800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  Good luck!

• HP Officejet 4500 print cartridge problem

  After you install the new black ink cartridge, error message came: 'print cartridge problem [Black]. Refer to the documentation for the device to get out of trouble. »

  I removed the cartridge and reinsert. Same message. Unplug the printer, then turn it off. When turned on again, the same message.

  Thank you, Jason, for your support.  Lesson: stick to what worked before, for example, 901 XL ink cartridge, as opposed to 901.

  Sidney

• Photosmart B109 question - display message print head problem cannot be removed

  Hi all, I just bought a used B109 printer/scanner, and I can't get rid of the message on the display screen.

  I bought the unit knowing he had a problem with Printhead and am waiting for a new print head, but the problem is, the language of unity has been defined in Czech by the former owner, and I want to change it to English. However, the process to change the language (press on high righ, middle left and bottom left buttons and the display screen) will not work because the display shows the message print head problem, and I can't get rid of the message.

  Is it possible to access the menu, while the print head message always?

  Oh, and is it possible to really connect with HP? Through their support just site ends with Q & A generic, that does not solve my problem as stated above... :-(

  Hello TonyW1967,

  Welcome to the HP Forums.

  In fact, you will have to wait until the new printhead is installed and clear the error before we can enter the setting menu to change the language on the printer.

  Here's the information to call the Tech Support of HP.  If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  Thanks for your time.

  See you soon,.

• printer cartridge problem, 4780

  HP 4780 Photosmart printer range;  Mac 0SX Mountain Lion operating system

  Error message: cartridge Printrer problem

  I completed all the steps my 4780 contained in customer site HP, with the exception of "Avenue" that have no troubleshooting.  The message of screen printer one message I get is 'printer cartridge problem '.  How can I get the normal menu printer on the screen?  How the problem of the cartridge can be fixed?

  Don213

  Here is a link that can help you with the "cartridge problem.

  http://support.HP.com/us-en/document/c01675471

  Let me know if you have done these steps and the results.

• Print error - "Print Cartridge problem. Refer to device documentation to troubleshoot. »

  Original title - device

  I changed the cartridges and the printer is now saying PRINT CARTRIDGE PROBLEM. REFER TO DEVICE DOCUMENTATION TO TROUBLESHOOT

  I did not have documentation, tried to solve the problems through my laptop but it cannot detact no problem.

  What should do?

  Seek assistance from the manufacturer of the printer.  They should have a copy of books online on the website of their support.

• Cannot print indicating print spooler problems

  Original title: print spooler problems

  Salvation of printing problems. Execution of troubleshooting etc. said istnt running print spooler. Does not restart when I go into administrative tools keeps of telling me error 1053. No idea how I could fix this?

  Hello

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  I suggest you follow the steps described in the links to search for a file and check the question below:

  1. What is the brand and model of the computer and the printer?

  2. did you of recent changes made to your computer?

  3. what store did you run?

  Follow the methods and check them out below:

  Method 1:

  Step 1:

  Follow the link below to run the Microsoft Fix It.

  Diagnose and automatically fix problems printing and printer:

  http://support.Microsoft.com/mats/printing_problems/

  Step 2:

  Follow the steps in the link below.

  Printer in Windows problems:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2:

  You need to check if the Printer Spooler service is started from services.msc.

  a. click Start, type services.msc in run and press ENTER.
  b. double-click the print spooler and verify that the status is set as Automatic or Manual.

  c. right-click on print spooler and click restart.

  I hope that the information above helps you.

• Print spooler problem. ERROR (0X000006BE)

  Print spooler problem.  I have a problem with the spooler to stop continuous printing.   I get this ERROR (0x000006be).   I've seen a lot of suggestion already... such as printer drivers are corrupt, need to clear the printer, etc.  I already went to SERVICES and connected so that administrator, assign the automatic print spooler, restarted the Services 50 times, etc.  Nothing works.  In response to a lot of suggestions, NOTE: I have not a printer is installed, I did not have any printer software installed, there is no DRIVER not installed appears to be damaged.  When I go to control panel > printers... There is no printer listed.  When I click on add a PRINTER, I get the message (0x000006be).  Any suggestions

  Hi Wireem,

  What is the brand and model of your printer?

  I suggest you to follow the steps and check if it helps.

  Method 1: Install the latest software and drivers for the printer from the printer manufacturer website and check if it helps.

  Method 2: You can also follow the link and run Microsoft Fix - it and check if that helps.

  Diagnose and automatically fix problems printing and printer

• HP Photosmart C6380: print head problem

  I just replaced the ink cartridges in my printer and a message pops up saying (printhead problem remove all the cartridges, then lift gray latch and printhead, and then reinstall the cartridges and print head) I did it a dozen times now, and the message is still there, what should I please

  Hi @PC21,

  Welcome to the Forums of HP Support!

  I understand that you are at the reception and the error about the print head on your printer HP Photosmart C6380. I will definitely do my best to help you.

  I would like to try the steps in this guide, the 'Print head problem' or "print head seems to be missing or corrupt" message for HP Photosmart C6300 all-in-One Printer Series.

  In addition, you can try the solution in this video. Use at your own discretion.

  Videos: 564 HP & HP 920 ink printers of the series - printhead to hot water Flush.