printer does not consistantly wake from sleep when the file is sent

Similar Questions

• my computer would not wake from sleep when the cover iclose & open again?

  When I close the lid on my computer & open it again, the computer does not wake up, it shows just a black screen!

  Hi George,.

  From the description of the problem, it seems that the computer would not wake from sleep when you close the lid and open it again. I understand the inconvenience.

  Let us, try to perform the following methods and check if it helps.

  Method 1: Run the troubleshooter of power

  Open the troubleshooter of power

  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  For more information, connect to:

  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  Method 2: Troubleshoot wake the computer from sleep mode

  http://support.Microsoft.com/kb/266283

  Method 3: Update Chipset drivers

  Download and install the latest version of drivers for chipset for the computer on the computer manufacturer site and check if you are faced with the same question.

  Method 4: Run the BIOS update

  I would say as you perform the update of the BIOS by contacting the manufacturer of the computer, check if it helps.

  Important: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you

• Laptop Dell Studio 1555 w / Vista does not wake from sleep when the lid is open.

  I have a laptop Dell Studio 1555 with Vista Premium 64-bit. Until last night, the laptop would run mode standby when I closed the lid and woke up when I opened the cover later. Yesterday I was downloading photos from a Canon camera via USB. I close the lid when I did. When I went to open the cover later the laptop screen remained in black and white. The power button is lit, but the only way I can get to meet is to hold the power button until it turns off completely, and then restart the laptop. A difference when the lid is closed, I think the power button will blink and turn off slowly while he was really in sleep. He remains on all the time now when the lid is closed. I tried to go into power management and put the laptop from sliding when the lid is closed, but has not made a difference.

  Run the system restore and choose a restore point created just before the problem occurred. Steve Winograd, MS - MVP (Windows desktop experience)

• Creative cloud does not start starting system even when the option to do so.

  Creative cloud does not start starting system even when the option to do so.

  This is an open forum, not Adobe support... Click below to contact Adobe staff for help

  While the forums are open 24/7 you can't contact Adobe support at any time

  Chat support: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Fingerprint reader not working not not upon awakening from sleep for the windows login

  Hello
  I have a new T540P with a validity fingerprint reader.

  About 80% of the time, the fingerprint reader does not meet the windows login screen after the wake up the computer from sleep mode. It works 100% of the time when starting from a stop position, however. Once connected, it also works 100% of the time. The question arises when you log in to windows.

  I tried many things

  -uninstallation/installation of the device in the Device Manager and finger print manager pro software

  -prints of setting through two fingerprint Manager software pro (lenovo) OR through the windows built in options of the control panel of the fingerprints

  -disabling "allow windows to turn off this device to save power" in Device Manager.

  Thus, I must say that I have an another T540P I ordered as a replacement. Both models encounter the same problem.

  Is it a matter of broad platform affecting all models of T540P? It's frusterating.

  
  

• Safari does not load pages after sleep in the active window

  Please note: I'm French, so what you read is not perfect. Thank you.

  Hi everyone, it has been so long that I tried to solve my problem on Safari.

  Let me explain what happens: when I wake my Mac, some site not loading, including Youtube, Facebook and Google until I

  -Close the Safari window and open a new

  -Wait at least a minute or two

  -Spam the shortcut for refresh up to what a "page not found" error.

  I tried all explained in this or other forums and do these things:

  -Reinstall the operating system (but keeping my data)

  -Restore with a Time Capsule

  -Open the terminal and type these commands:

  -Fixed permissions and owner

  sudo find ~ $TMPDIR... - exec chflags h nouchg, nouappnd, noschg, nosappnd {} - exec chown () $UID h - exec chmod + rw {} + - exec chmod () n h ++ - type d - exec chmod h + x {} + 2 > & -.

  -Reset Safari

  MV ~/Library/Safari ~/Desktop/Safari-'date + %Y %hour %m %d ' %s; RM - Rf ~/Library/Caches/Apple\-\ Safari\---------Safari\ Extensions\ Gallery; RM - Rf ~/Library/Caches/Metadata/Safari; RM - Rf ~ / Library/Caches/com.apple.Safari; RM - Rf ~ / Library/Caches/com.apple.WebKit.PluginProcess; RM - Rf ~ / Library/Cookies/Cookies.binarycookies; RM - Rf ~/Library/Preferences/Apple\-\ Safari\---------Safari\ Extensions\ Gallery; RM - Rf ~ / Library/Preferences/com.apple.Safari.LSSharedFileList.plist; RM - Rf ~ / Library/Preferences/com.apple.Safari.RSS.plist; RM - Rf ~ / Library/Preferences/com.apple.Safari.plist; RM - Rf ~ / Library/Preferences/com.apple.WebFoundation.plist; RM - Rf ~ / Library/Preferences/com.apple.WebKit.PluginHost.plist; RM - Rf ~ / Library/Preferences/com.apple.WebKit.PluginProcess.plist; RM - Rf ~/Library/PubSub/Database; RM - Rf ~/Library/Saved\ Application\ State/com.apple.Safari.savedState

  -Fix permissions with the inbuilt system tool

  sudo/usr/libexec/repair_packages - repair - standard-pkgs - volume.

  -Log in as a guest

  -Start in safe mode

  -Switch to recovery mode and put something else in the window "resetpassword.

  -Remove all apple leaves me with the GUI (cookies, cache, etc.)

  -Mess with network settings, but it's obviously very well because other programs have no problem for example. Chrome, Firefox, Mail, Push notifications...

  -Uninstall all extensions safari

  -Unplug my micro sd card and reboot (which is constantly plugged into my mac)

  I am so angry with my computer because I paid 1.5 k for a computer that is not able to make the task easier for a modern computer. Even a €50 computer has embedded software that can handle a resume from sleep without having to restart the entire software... Imagine if you had to do it on your iPhone, you will eventually get a refund within a week or less because it is not normal in 2015 to have this kind of problem. I hope that I have no problem with safari on my 6s and I don't plan to spend my browser because Safari is part of the Apple ecosystem and have the perfect sync and battery management.

  So I need to get this fixed a problem and I really need your help because a lot of people had this problem on the internet, but NEVER seen someone who explained how it happened is the correction of a problem. My Mac running the latest version of the software which is 11.2 starting today.

  Here is a video of the problem:

  https://www.YouTube.com/watch?v=AjfAlkKEVsc

  And some examples of the threads on the internet, I found the same problem:

  Safari does not work after the mode 'sleep'. Apple support communities

  Safari doesn´t supported pages after waking up

  Safari does not load page after waking up

  Facebook doesn't "work" after the awakening from the sleep - MacNN Forums

  Corruption Safari       See post by Linc Davis

• CD/dvd drive does not work - it is recognized when the computer starts, and it is listed in the Device Manager?

  I am running Vista Home Premium on a laptop Compaq Presario F700. It is listed in the list of computers of readers, it is listed in Device Manager. The lites drive that the computer boots so I know it is detected. When you run itunes or media player the player does not open. When I push the drive button it will not open. It opens with a paperclip in the exit hole. It cannot read a CD or a DVD. None of the media players even recognize there is a disc in the drive. I tried to run fixit, but it would not drive either. I tried restoring from a previous backup, without change.

  Hello

  Check / settings (BIOS/CMOS) often F2 so watch the screen as it starts - place CD/DVD
  1st in the boot order (remember to put it at the time where the fact).

  Then put in a DVD to boot Windows and see if the driver works.

  If it doesn't then it's a hardware problem.

  =======================================

  If the drive has worked in the test above, that these can help:

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• ComboBox does not display an element selected when the masking

  Hi all

  I have a combobox in the layer that lies beneath the mask (layer mask). It does not display an element selected in particular in the chrome browser (version 14)

  When click the combobox drops down and display items, but when making the specific item selected, it does not appear.

  Please help me solve this problem

  Vishal parekh

  Embed your fonts of textField comboboxes.

• WordPad is not opening a .rtf girl when the file is double clicked.

  Windows XP Service pack 3: My Wordpad will directly open a file .rtf given from "Open file" in the Wordpad program but after setting the default file options in the control panel and then double-click the file .rtf even, I get... "the file xx.rtf is not a valid Win32 application."  Any suggestions?

  Hi Ray,

  We will do a right-click on the RTF file and select Open with, select Wordpad and check if you get the error message.
   
  You can also try to define Wordpad as default option "choose default program" and check.

  a. right click on the RTF file, click Open with to choose the program you want.

  b. point to Open withand then click Choose program to choose the program you want.

  c. the Open with dialog box appears. Use one of the following methods to select the program you want to use for this file type:

  d. in the list of programs , click the program you want to use.

  e. click Browse, find and then click the program you want to use, and then click Open.

  f. click look for the appropriate program on the Web to browse the Internet for the program that you want to use.

  g. Click to select the check box for always use the selected program to open this kind of file if it is not selected.

  h. click OK.

  Also check out this link:

  How to change or choose the program that starts when you double-click a file in Windows XP

  http://support.Microsoft.com/kb/307859

  I hope this helps!

• Dreamweaver does not open! Why? Click the file exe but nothing :(

  When I click the .exe dreamwever his open do not...

  Try this help article:

  Unusual behavior in Adobe Dreamweaver? Try restoring preferences.

  Nancy O.

• Printer does not not after replacing the hard drive

  Original title:

  just had new hard drive, now printer has stopped working

  printer worked perfectly, was to have the new hard drive, now the printer does not

  Hello

  1. What is the file extension of the document that you are trying to print?
  2. Have you tried the suggestion from my previous post?
  3. The problem occurs so that printing from a specific application, or it happens with all?
  4. You are able to print the test page?
   
  You can try the steps in the link below and check:
  Error message when you try to print an .xps document in Windows Vista or in Windows XP: "an error has occurred in the application you were using.
  http://support.Microsoft.com/kb/945538
  Note:
  Although article applies to Windows XP and Windows Vista, you can try the steps and check if it helps.

• (Redirected) XPS 13 Ultrabook wake from sleep!

  Hello!

  I have a Dell XPS 13 ultrabook I love, apart from a major problem. I can't seem to wake from sleep using the keyboard or the mouse. I never had this experience with a laptop before.  It is a pretty big problem, I use the XPS 13 has docked at the D3100 docking station and connected to an external monitor, keyboard, and mouse.  I keep the laptop with the screen closed and just use the external Setup - as you usually would when it is docked. Everything is fine until the device goes to sleep. If the computer is still on, but just the external monitor is turned off because the power settings, and then moving the mouse/hit the keyboard to wake the rear monitor. However, if the computer is idle (NOT put in hibernation), it nothing happens when I move the mouse or repeatedly hit the keyboard. I need to get out the ultrabook the cubby that's in, open, hit the power button, then close and replace. He gets the computer turns on again, but is incredibly annoying. As a side effect of this, all my windows get resized and my icons moved the Office because the latop temporarily switches to the built-in screen (which is at a resolution lower than my external monitor) before returning to the external display. I had the Latitude laptop for years without any problems and was disappointed with this experience. I really hope that there is some sort of fix.

  So far I have tried:

  1. connect the receiver of keyboard/mouse wireless in all USB ports on the ultrabook itself and also the dock of the D3100. No difference is made.

  2. try with a wired keyboard and wireless. No difference is made.

  3 tent to shoot to the top of the mouse/keyboard power management settings in device management and ensure "Allow device to wake the computer" is checked. Not possible, "Power management" tab appears now available in Windows 10 in the device properties window.

  Help, please!

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Bev.

• Printer does not print not complete pages.

  When I give print command, the printer (I use MS Works), the printer starts to print a page and then, after a few lines, will be offline prematurely. The printer does not turn off. It sounds the signal that the job is done and ejects the sheet of paper. Maybe 5 lines are printed until the printer ends prematurely.

  Hi Davy40,

  I understand that you are having problems with your printer only give you partial pages, but acting like it printed the entire page. I'm sorry to hear what is happening, but I will certainly do my best to help you.

  I just need to ask you some questions to help you better!

  1. what model printer work?

  2. you are working with a Windows or a Mac computer?

  3 do you get errors when trying to print?

  4. how the printer is connected to the computer? USB or wireless?

  Once I have this information, I should be able to help!

• I put a new ink jet cartridge in the printer and the printer does not work although it is switched on

  Cartridge replacement installed on a lexmark 730 printer inkjet series all the cables and connections ok but the printer does not work

  Hello

  as the poblem started when you changed the ink cartridge contact Lexmark

  http://support.Lexmark.com/index?page=home&channel=supportAndDownloads&locale=en&UserLocale=en_AU

• Printer does not print in PDF format. Does not set the printer as the default printer.

  I have windows vista 32 bit and quickbooks pro, at first we could not open quickbooks, called and had to reinstall, then the printer will print not in quickbooks. The printer does not green check mark display when you set as default printer.  We have uninstalled and reinstalled the printer it will print but not in pdf.  Also, there is a problem with updates, error 2 codes are coming and will not be installed, 646 (update of microsoft office) and 643 (update net framework)

  Hi Bobob23,

  Try the suggestions in the article below.
  http://kb2.Adobe.com/CPS/316/316508.html

  REFERENCE:

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".

  Code error '0 x 80070646', '646', or '1606' when you try to install the Office updates

  Bindu R - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.