Printer HP model CN216B B2109: error 0xc19a0020 B2109 HP all in one PhotosmartPlus

Similar Questions

• HP C7280 All in One printer: HP Scan of the error using HP C7280 all-in-one printer

  I was scanning documents successfully until recently.  I use a Mac with OS X 10.7.5 and receive the following error message when you use HP Scan.

  Cannot perform the analysis because another program has control of the HP imaging device. Try the following steps. After each step, try to scan the image.

  -Restart the program.

  -Close all programs that might be using the device.

  -Restart the computer.

  I tried to download several drivers without success.

  Any help would be greatly appreciated.

  Hello @kellycc,

  Welcome to the Forums of HP Support! I see when you try to scan with your HP Photosmart C7280 with your Mac running the 10.7 operating system, you get an error "cannot perform the analysis because another program has control of the HP imaging device. Try the following steps. After each step, try to scan the image.'.

  Complete the following steps:

  Scrub / uninstall

  • Open the Applications folder > folder HP or Hewlett Packard > Uninstall HP
  • Click continue, click on one of the printers in the list.
  • * Only perform this step if you have not all other HP printers. Hold down the command, Option , and command, while now the three buttons.
  • Click on Uninstall.

  Reset the printing system

  1. click on the Apple icon ( ), then click on System Preferences.

  2. in the hardware section, click Print & Fax/scanning. The Print & Fax/scanning dialog box opens.

  3. make a right click (or Ctrl + click) in the left panel and then click on reset printing system...

  4. click on OK to confirm the reset.

  5 type the name and the correct password.

  6. click OK to reset the printing system. The Print & Fax dialog box shows any selected printer

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol...

  Repair disk permissions

  1. on the Dock, click Applications, then utilities.

  2. double-click click disk utility.

  3. highlight your hard drive / partition on the left (by default this is "Macintosh HD").

  4. click on the button to repair disk permissions at the bottom of the window.

  5. once the repair is complete, restart the computer.

  Restart the printer. Now, you will need to install the printer driver using the Apple updates. Click on the link below and follow the instructions on the screen:

  Installation of your printer driver HP and software for Mac OS X

  I hope this helps, please let me know the result!

  Thank you

• Printing problems of Notebook PC G72 for Officejet J6480 all-in-one

  Unable to print on my Officejet J6480 HP printer all in one of my G72 Notebook PC.  Do not know what is happening, I could possibly print incorrect setting.  But I was able to print before.

  Hello

  · What is the operating system installed on the computer?

  · You receive an error message or error code when you try to print?

  · This occurs when you try to print with a particular application?

  Try the steps listed in the link below: printer in Windows problems: http://windows.microsoft.com/en-US/windows/help/printer-problems-in-windows

• Errors in recovery of all-in-one 23-b320 0xe0ef001e and 0 x 80070057 to install new

  I'm really stuck.  I just got a refurbished all-in-one 23-b320 with Windows 8 pre loaded.  Everything worked fine for the first 4 hours.  I applied all the patches from MS and then started the Windows 8.1 update.  23% completed, the hung process.  After 16 hours of no progress, I turned off the desktop computer.  Enter into recovery mode via the Bios, I expected to be able to recover.  The recovery process has failed.

  My next attempt was to have the recovery discs, I've created since a new b320-23 who was also preloaded with Windows 8, but I had updated to Windows 8. 1. the recovery discs are the Windows 8 of his recovery partition.  I used the Recovery Manager to create the floppy disks and Windows has reported that they have been created successfully and verified.  Yes, I have 2 identical models of the all-in-one - 2 parents and it's easier when they both the same pc.  I thought I could use one for the other difficulty.

  The problem is the recovery discs to throw an error halfway recovery - 0xe0ef001e.

  After looking through the forums, I started with a 8.1 Windows installation disc, entered mode to 'Fix the computer', troubleshooting, command-line and use own diskpart and convert a GPT.  Then I went back on the discs of recovery and got the same error.

  Then I thought that maybe I could install Windows 8.1 charges against this record since I've only wiped out all partitions with the clean command and had put in place a new set of partitions.  Once installed, then perhaps the recovery disks would work.  Well, I can get the Windows 8.1 installation to work either.  When I select the partition to install on, he pointed out that "were leaving the disk selected for installation are not in the recommended order.  I proceed and error - 0 x 80070057.

  I deleted the partitions with diskpart own and then tried to allow installation to.  Same result.  When the windows setup program creates the partitions, it throws the same error on the order of the partition and the same error when I say "still".

  I've seen mention of other partitioning tools but have not been able to use all (like kill disk) because they seem to start in DOS and for some reason I can't seem the all-in-one to start in as simple as back soming.  The only things I was able to boot from (with Secure Boot off) are:

  (1) the recovery disks

  (2) disk Windows Installer of 8.1

  (3) Ubuntu 14.04

  All of these are TPG bootable images.  BIOS do not find anything that is not gpt, so anything with the old MBR does not appear in the list of bootable devices.  I tried several different disks from older systems, and none are recognized.

  Note: I discover that I had not enabled support legacy of boot in the bios to have activated it year am now able to boot DOS.  I'll try some of the other tools suggested as a drive to kill.

  I ran through all the diagnostics BIOS and no error found in one of these tests.

  Any suggestions or is this time now to ship to HP for repair or replace?

  Resolved by reinstalling the HDD to the SATA cable and replace the SATA cable to the motherboard.  The cable for the connection to the motherboard was a little loose in the socket.  Once this has been done and the computer back together, the recovery disks works beautifully and restored the image.

• Before left SS USB not detected & gt; Model: 20-a220l & gt; Series of PC all-in-one HP Pavillion 20

  Dear concerned

  My PC: Model: 20-a220l > HP Pavillion all-in - one PC series 20,.

  Operating system: WIndows 7

  AV - SS USB not detected by any modem or USB key left right back side - USB 2.0 work.

  Rgds/Khalili

  Hello:

  You can have a TI USB controller.  See if this driver USB3 works...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-104401-1&cc=us&DLC=en&LC=en&OS=4063&product=5192630&sw_lang=

  If this driver does not work either, please complete the following steps so I can know what model USB3 controller motherboard in your PC is using.

  Go to Device Manager, find the other devices category, then click on the USB controller needing drivers.

  Then click on the Details tab in the upper part of the window USB controller.

  Now, you see a drop-down list of property and it is set by default to the Description of the unit.

  Drop down on it and select the second item in the list (Hardware ID).

  After the first string of characters you see in the window.

• Cannot print from the site Microsoft Learning with my Kodak all-in-One printer

  Yes, I use an all in one Kodak printer that seems to work correctly.  However, while I am online on the Microsoft Learning site and try printing the glossary of words in the definitions, it seems that the learning site does not allow me to print the glossary.  The notes I take can be printed as well as other parts of training modules.  In addition, there is another issue that may or may not be related to the printing problem.  When the printer is turned on and I get ready to print a small icon in the lower right corner of the screen tells to disconnect me the USB device safely.  Also, I followed the instructions and disconnect the printer, but warnings continue to appear every time I have to restart the printer.  Thanks for any input into my problem.  Stephen

  * original title - problem with printing, maybe not printer friendly Version *.

  Hello

  · What happens when you try to print?

  · It affects all print jobs, or is the concern from Internet Explorer?

  · Were there any changes made on the computer before the show?

  If this is a recent problem, you can try to perform the system restore and restore the computer to the date it was working fine. For steps see: how to restore Windows XP to a previous state: http://support.microsoft.com/kb/306084

• Error of 4500 HP all-in-one wireless Wep

  I installed the printer HP 4500 all-in-one wireless.  He acknowledges the Apple network and then ask to for the WEP key.  I enter this code and it says invalid WEP.  It is not the wrong password... Help!

  If you are using Snow Leopard or Lion and you have the HP software before Snow Leopard (either from a CD not marked as compatible with 10.6 or you recently upgraded to Snow Leopard or Lion and had the software HP on your Mac before you upgrade - even if you made a standard from the old software uninstaller or installed new software on top of it) , you must uninstall the software by using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall< this="" is="" the="" scrubber="" option,="" there="" is="" no="" button="" labeled="">
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Now reset the printing system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• Unable to get double printing to work. new HP Officejet 6500 has e-all-in-one.

  Impossible to get double print to work after you have installed the duplexer to my new HP Officejet 6500 has e-all-in-one.  I can't find where I can change to double-sided printing in the soft ware.

  ShlomiL wrote:

  This is false,

  You should contact the dept store as was provided with misleading information.

  Below you find the accessories compatible with the Officejet 6500 a.

  As you can find in the list, the duplex accessory is suitable only for HP Officejet 6500 a more e - AiO - E710n:

  http://support.HP.com/us-en/document/c02492482

  Kind regards

  Shlomi

  Thank you very much

  Ron

• Why can't print with my photo on my photosmart tray 6520 all-in-one printer

  I haqve never been able to print photos from my photo on my photosmart printer tray all in one.  How can I do?

  Tounsiiaa, but he still pulls paper from the main paper tray but prints in the center of the page.

• Mac pro book recognizes the printer, but not the scanner on my Photosmart C4280 all-in-One.

  Buy a new mac book pro.  Apple Store has transferred all my apps from my old mac pro book to my new.  Now my new laptop does not recognize my scanner, but he acknowledges the of my Photosmart all-in-One printer.  What should I do? Thank you.

  Well Yes, that's the proof that you have old HP software out there.  Let the Snow Leopard to install Rosetta (it should do if you say its OK).

• Do error scan from my all-in-one HP Laserjet Professional M1213nf 22.

  I get 22 scanner error when I try to copy a page using the copier function. After that, I have to restart my printer to disappear this error. I also checked the version of firmware by print config report and it says the datecode frimware is 20130211 and the version of the software is 20121108. I also used the HP Print and Scan doctor to correct the error. But nothing seems to work for me. So please help me...

  Hello

  I understand that you found a 22 scanner error.

  Perform a power reset.
  
  Press the power button to turn on the printer.
  
  With the printer, unplug the power cord at the back of the printer.
  
  Wait at least 30 seconds. Reconnect the power cord to the back of the printer.
  
  Press the power button to turn on the printer.
  
  
  
  Update the firmware on the printer. I've included the url.
  
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us & dlc = in & lang = to & lc = in & product = 4075457 &
  
  
  
  I will send you a private message with some information to take a look at.
  
  In the forum next to your handle name simply click on the envelope to see.

  Let me know if this helps.

• cartridge error HP psc 1210 all-in-one

  I replaced the cartridge from the printer, cleaned and reinserted it several times. The contacts on the cartridge air clean, and the contacts inside the printer air clean.  The results are intermittent. Of course, when I remove the color cartridge I get impression black ok. I wonder if there is probably a problem with the contacts in the printer, so that even if they are clean, contacts are not deployed. Otherwise, it's a problem of internal material just with the color circuit. Or is there a way to tell. The "check print cartridge" light flashes, it is not very revealing.

  Hello Blackjackand welcome to the Forums of HP.

  First thing I would recommend would be to remvoe the cartridges and reset the power supply.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I would also follow through the steps listed in this document on Print Cartridge errors.

  If those who do not solve your problem, I'd be suggeest contacting HP directly.  You can use this Web site for information about how to contact HP properly, based on your region: contact HP worldwide.

  Please contact the HP Forums.

• PRINTING PROBLEMS W/WINDOWS 8 ON 7515E PHOTOSMART HP ALL IN ONE PRINTER

  Since the installation of Windows 8, I got that printing problems. The good drivers have been installed on the site of HP.  It worked well at the start and all of a sudden, it doesn't. The print job is in the queue and when you look in the print dialog box, it says the printer is offline, but it shows that's it is connected to the internet and the static IP address keeps changing. The only solution is to completely uninstall the printer and reinstall it. Then it will work until the next time you have to print.

  What happens on both computers mobile home now with Windows 8.

  I can take the same document that would not print from these computers, it trouble-free printing from the computer that is running Windows XP.

  Tried the doctor to print HP (or whatever it's called) and it is nothelping to solve the problem.

  Help!

  This article should help with your error printer offline:
  http://support.HP.com/us-en/document/c02221706

  Give the steps described a try and tell us if it helps.

  Good luck!

• Mac Book Pro recognizes the printer, but not the scanner on my Photosmart C4280 all-in-One.

  I asked this question last October and it was answered and everything worked perfectly.  Now, my computer says "no scanner is selected."  I was clicking on and clicked on "reset printer", now it doesn't even brings a touch of the scanner click on!  I tried to look back on the post of October 2010 who helped me before, but the solution had me uninstall the HP application and now it is no longer in my applications.  What should I do?  I don't know if I'm explaining this very well.

  Thank you.

  We will restore the print system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• Printing pictures, 4 x 6, the IPad 2 HPC6150 All in One, Photosmartz printer wireless

  I have put in all the parameters to make this chore, but impossible to get the ferry to work. Can't get HP steps for a reason, so looking for help.

  I have no experience with printing and sharing Pro, because it is a third party application that I have not personally tested myself. What it looks like, is that you are confusing the other two applications. Both apps you mentioned are not related to what you are doing, because they don't use AirPrint. For AirPrint works, you must have Bluetooth turned off on the iPad, they both part of the same wireless network (have the same SSID) and be close to each other. Make sure that these three things are in order (rebroadcast the wireless assistant installation if needed), the power both the iPad and the printer and unplug the router. Plug the router back and when the lights to return to the normal, power back on both devices.

  Try to use this feature again.

  HP ePrint App on the other hand, it is an application that you need to open and individually to use its features internally. I might try this and see if you encounter any problems using it.

  Here's a FAQ on the ePrint with other information site: https://h30495.www3.hp.com/help

  Let me know how it goes!

  If you think that I'm being useful, a great way to show your thanks is by clicking the star under my username on each post to give me congratulations, a quick way to say thank you on the forum. In addition, you can click on the Solution below to the right of my post to show others how the problem was solved.