Printer J4680 all-in-one

Similar Questions

• J4680 ALL IN ONE: POWER PRINT; UNABLE TO FAX OR SCAN CONNECTED WIRELESS.

  ERROR MESSAGE CONSTANTLY ERROR 358

  Hey @GS44,

  Welcome to the Forums of HP's Support.

  I understand that you encounter some issues an error message when scanning for your Officejet J4680 all-in-One printer to your computer Mac OSX 10.11. I can help you with that, but I'll need to know if you see the message on your computer or a printer. I also need to know what program you want to scan to. and if you are able to make a copy of the façade. Once I know that I will be better able to help you.

• OFFICEJET J4680 ALL IN ONE PRINTER does not print after installing Windows 7

  THIS HAPPENED MORE THAN A MONTH. I STARTED WITH WINDOWS VISTA. HP SUPPORT ADVISED LATER FOR THIS WINDOWS 7 WORKS BETTER FOR MY PRINTER. NOW I HAVE INSTALLED WINDOW 7 AND I GOT THE PHONE SUPPORT TO GO ON MY COMPUTER AND SET IT UP. EVERYTHING WORKED AS SUPPOSED, PRINTING, SCANNING. THE NEXT DAY I TRIED TO PRINT SOMETHING AND I WENT BACK TO SQUARE ONE. The SCREEN LIITLE ON THE PRINT JOB CAME AND SAID THAT the PRINTER does NOT PRINT. I WENT TO THE HP SOLUTION CENTER AND A NOTE SAID THAT THE PRINTER IS DISCONNECTED. I RETURNED AND COPIED MY NETWORK CONFIG. AND THE WIRELESS TEST. EVERYTHING IS RUNNING WELL HUNG OF THE PRINTER. THE DEFAULT PRINTER IN THE RIGHT IMAGE. THE ONLY THING I NOTICED WAS IN THE PORT AREA. UNDER THE WINDOW VISTA, I GOT TWO PORTS. ONE WAS FOR THE PRINTER AND OTHER FAX. WHEN THE HP PRINTER HAS BEEN REINSTALLED, I DON'T KNOW IF IT STARTED WITH ONLY ONE PORT. THE PORT IS ENABLED BY IT AND HAS THE FAX FROM WORD TO THE END ON WINDOWS VISTA, BOTH PORTS HAVE THE SAME INFORMATION, EXCEPT A EU FAX OF WORD AT THE END ANY HELP ON WHAT SE PAST.

  I JUST INSTALL WINDOW 7, MY OFFICEJET J4680 ALL IN ONE PRINTER. NOW IT WON'T PRINT. THE DAY BEFORE, IT WORKED.

  Hey 123 problems,.

  You will need to go to the HP website to download the latest software/drivers for your printer on Windows 7:

  http://h10025.www1.HP.com/ewfrf/wc/product?product=3692888&LC=en&cc=us&DLC=en&lang=en&cc=us

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Printers HP j4680 all-in-one: report of transmission J4680

  I have a HP j4680 all-in-one printer and am running Windows 7.  I no longer receive the audit reports of transmission when I send a fax.  I received of these reports, but for some reason any printer no longer prints this form after the fax is sent.

  Hello @Basha2,

  Welcome to the HP Forums!

  I hope you have a pleasant experience here.

  I want to help you with the confirmation report of fax on printer all-in-one HP Officejet J4680.

  I don't know why it would stop printing. Did you do any sort of reset of the printer? Or make changes to your configuration? Either way, here are the steps to make sure that it is turned on:

  1. On the Panel of your printer, tap the Setup button (it looks like a key).
  2. Press the right arrow until you see print the report to the screen. Press OK.
  3. Press the right arrow until you see Fax of Confirmation on the screen. Press OK.
  4. Press OK when you see IT, on the screen.

  I hope this helps!

  

• How can I scan multiple pages to a PDF on HP Officejet J4680 all-in-one?

  I have a printer HP officejet J4680 all-in-one was given to our non-profit organization.  How can I use this to scan multiple pages to a PDF file and send it to?

  Hello

  Form of the document refer to the article on the digitization of several single-file pages.

  http://support.HP.com/us-en/document/c03476857

• J4680 All in One

  I'm unable to install the software and drivers complete for my J4680 all in one. My operating system is Windows 64-bit of 8.1. I tried muttiple ways to install including printing and scanning doctor. I pass the download and Extraction... but nothing to show for it. I also get an error message indicating that the system does not find this file. And that ends my installation as well. Thank you

  Hello
  Follow the steps below and check if it solves the problem:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Never select and confirm by clicking the button turn off.

  Now, try to reinstall the HP software and check if the installation goes as planned.

  If the problem persists, continue following the steps below:

  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7. run the installation file and check all difference.

  If the problem persists, restart your PC and launch the installation program once more.

  Once you have finished, remember to re-enable McAfee for analysis in real-time.

  Kind regards
  Shlomi

• Re - install the software for the printer C6280 all in one... get a "file not found" error message

  you need to reinstall the software for the printer c6280 all-in-one. Downloaded the last installation on HP web site package. During the installation process I get an error message... Unable to find user/appdata/local/temp/7z256315/setup/...setup/blocksysuser...

  the 7z256315 folder does not exist on the hard disk.

  I also have a message that it cannot find PS_A10_02_software.msi.

  Windows 7, C6280 printer all-in-one. Printer is connected to the router. The desktop computer is connected via an ethernet cable, the laptop/ipad/iphone/internet radio are connected via the wireless to the router.

  I hope you can help

  Thank you

  Charlie

  Hi cberistain,

  Follow the steps below and let me know what happens?

  First step: clear temp directory

  1. Type %temp% term or search programs and files of field
  2. Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
  3. Proceed to step 2 below

  Second step: downloaded and extracted to your system:

  1 download the drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-77039-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 3645097 & sw_lang=.

  2. once the download is complete, double-click the file to extract the software.

  3. when the installation window opens, press the Cancel button to stop the installation

  4. tap folder in the race or search programs and files of field

  5. Locate and open the folder starting with 7z (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11 start the uninstall_L4

  12. once the uninstall is complete, restart the computer

  13. run disk cleanup from the tools Accessories\ system under all programs folder

  14. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know if you are able to successfully install the software and driver and are able to print and scan?

• Installation printer A920 all-in-one

  I just bought a used, refurbished OptiPlex 755 PC with Win 7 OS and am trying to install my all-in-One A920 printer. This is the printer that came with (my Dell Dimension 2400 series) desktop I bought about 7 years ago. I downloaded and installed (or so I thought) a Vista 64 bit driver I've read on the Dell website is supposed to be compatible with my Windows 7 64-bit OS. I plugged my printer and opens the file. I thought it was going to guide me through the process of setting up, but he did not. My computer recognized my printer, and he let me even in the all-in-one program. I was able to scan a document in color (but it wouldn't let me save it), I was unable to copy or print documents, and the "empty cartridge" box came up saying that black inkjet cartridges and color were empty; they are not empty because I recently replaced both cartridges. I miss any step, or not to do something in the right order? The printer does not give me a lick of problems on my Dell PC with Windows XP. I don't want to have to buy another printer, if possible, any help you can give me would be appreciated! Thank you! p.s. I have not loaded MS word on my new computer, so I wonder if this has nothing to do with the printer does not. (??)

  monksplay,

  The procedure is listed below. The OCR program, found on the disc from the printer, is required for scanning documents and fax.

  First run, delete print jobs to eliminate any print job stuck in the queue.

  Unplug the printer.

  Download and run the patch (cleaning printer utility) until it prompts you to restart your computer.

  Restart your computer. Make sure that the printer is deleted. Driver Manual printer removal

  Download the 32-bit drivers for Vista for Windows 7 32-bit or 64-bit drivers for Windows 7 64 bit Vista. Install the Vista drivers in Vista compatibility mode, you will get a message, the printer is not connected. Connect the printer at the moment (power on).

  You will find links to the patch/drivers to...

  Owners of printer inkjet all-in-one Dell A920 thread (W7)

  Don't forget the programs anti-virus and firewall will block communications.

  In the digitization, if you have the disc that came with the printer, and then insert the floppy disk to the printer and keep it from running. Go to my computer and double-click it. Locate the drive that contains the disk Dell inside. Right-click on it, left click Explore. Find the folder of the OCR. In the OCR folder, there is a folder of Abbyy. Right click on setup.exe, which is located in the folder Abbyy and left, click Run as administrator. This will install the OCR program.

  Rick

• HP psc 1210 printer v all-in-one

  I'm missing a driver for my hp psc 1210 printer v all-in-one.

  I can't print from my desktop pc to Windows 7 on my printer.

  Printer works very well to plug into the wall for printer - will make copies just fine.

  Computer added my default printer - that part is fine.

  When I try to print from the computer to the printer, I get a message saying the printer is waiting for 1 document waiting to print, but it will not be printed.

  I tried to unplug the USB cable and plug it into another USB port, but it does not work either.

  Tried the Printing Troubleshooter?
  http://Windows.Microsoft.com/en-in/Windows7/open-the-printer-Troubleshooter
  If this does not help, try this procedure by Arthur Li [MSFT]:
  Clear printer spooler files and activate the Spooler Service
  =================================
  1. click on start, type "Services.msc" (without the quotes) in the search box and press ENTER.
  2. double-click on "Printer Spooler" in the Services list.
  3. click on stop, and then click OK.
  4. click on start, type "% WINDIR%\system32\spool\printers" in the search box and press ENTER, remove all files in this folder.
  5. click on start, type "Services.msc" (without the quotes) in the search box and press ENTER.
  6 double click on "Printer Spooler" in the Services list.
  7. click on start. In the Startup Type list, make sure that "Automatic" is selected and click OK.

• What should I buy to re - install my printer Dell all-in-One A960 Windows 8 after Windows XP?

  My printer Dell all-in-One (purchases. 2004) has stopped working.  When you try to use, sign popped up "print spooler service does not work? This has happened a month after that I switched to Windows 8.  Dell said there is no software for this printer be re-installed Windows 8 and suggested that I buy a different printer.

  I don't think that Dell should have the last word.  Any advice?  Can I buy drivers, other software?

  Thanks for your information.

  I suggest to try this:

  (1) unplug the printer from the power point

  (2) connect one end of the USB cable to the printer (if it is not already connected)

  (3) connect the other end to the machine using any free USB port

  (4) turn the printer by plugging the power plug

  (5) look at the screen to see if Windows indicates all compatible drivers

  If this does not work then try to look for Windows7 or even Windows Vista drivers and then install. However, make sure that these drivers are from the DELL website if possible)

  Good luck and hope it works.

• J4680 all-in-one and 4315 all-in-one

  I have a 64 bit Vista Home Premium Toshiba laptop connected wireless to a HP j4685. In another part of the House, I have a Compaq F750US laptop plugged into a 4315 all-in-one.

  My understanding is that HP offer no Driver printer until January. Apparently, the driver of Windows 7 proposed in the workaround HP will work with the Compaq and 4315 since it is a wired connection. But if I read workaround, I'm out of luck with the connection between the Toshiba laptop and the j4685 wireless.

  Anyone used workaround to print/fax and photocopying? I must learn to several people to use the two computer-printer combinations. Is it easy to use for the print/fax/copy?

  Thank you.

  I don't know if the J4680 has the particularity of webscan. Try accessing embedded web page printers using his IP address and check on the left for a link named Webscan. Alternatively, download and install the complete software for the J4680 using the link below.

  Click here

• My OfficeJet J4680 all-in-One is a Clipboard

  My printer all-in-ONe Office Jet J4680 Wireless does not connect to my computer running Windows XP.

  I managed to install the driver and it appears on the Control Panel, but nothing happens when I try to print connected by USB.

  When I try to configure the wireless feature, the printer is not found by my computer.

  Using the printer configuration, it detects my network, but does not recognize the password entered correctly.

  I work diligently on these problems for days. It is more useful! I need help. Thank you, Todd

  When I run the ConvergedIO_HPcom_V3, it says that I don't have a driver who needs this update.

• HP Officejet 5740 e-All-In-One: multiple frustrations with printer e-all-in-one-hp officejet 5740.

  I have a HP Officejet 5740-e all-in-one that has all sorts of problems: periodically decides not to print documents from one of my laptops HP or Lenovo.  Do not accept ink cartridges HP Instant ink or HP ink cartridges purchased in a store.  Unable to get decent support for this HP product.  Is essentially a disposable item now?

  As far as I know that there is no user replaceable parts in these lower end home use printers. So if nine ink cartridges do not work, and seeing that the cost of the printer is less than $ 100, Yes... it's basically a Jet printer away. Wish I had better news for you.

• to re-enable the printer hp all-in-one

  I accidentally deleted my all-in-one printer to my computer by pressing the wrong button.

  How to re-enable the device plse?

  The printer in question is hp all-in-one deskjet 2050 J510 series.

  I also use Windows 8.1

  Kindly give me easy step by step instructions as I am that an old age pension at retirement cvil servant and slow on the uptake at my age.

  Thank you very much.

  JoeBuzu

  Here is a link to the complete software.

• Total number of pages printed on printer e-all-in-one-hp officejet 6700 premium do not match

  Printer model: hp officejet 6700 premium e-all-in-one

  OS: windows xp, service pack 3

  Method of connection: network

  Description of the problem: number of page do not match

  If I double click on the "hp officejet 6700" icon on my desktop.

  Then click on "view the ink level.

  Then click on the reports of the device"" tab.

  Then click on "check printing.

  The report provides: Total number of printed Pages 8159

  If I double click on the "hp officejet 6700" icon on my desktop.

  Then click on "view the ink level.

  Then click on the "devices" tab

  Then click on "printer ews home page."

  Then click on the 'Tools' tab, I see:

  Total number of pages

  6725

  Difference = 8159-6725 = 1434

  Can someone tell me why these numbers are different? They represent different totals?

  MelanieHello and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you have questions about your number of pages.  I would like to help.

  The built-in web server does not account for pages printed not across the network.  The number of printer pages all the elements. 1434 pages were not printed through the network, therefore, not counted in the SAP.

  Please let me know if you have any questions.  Thanks for posting on the HP Forums!