Printer Officejet 7612: 7612 problems

Similar Questions

• OfficeJet 7612: Margins printer Officejet 7612

  I have purposely left for info OS 'unknown', because I have this same question if I use my Mac, my Windows machines, or simply walk over to the machine and copy something.

  The minimum margins announced for this printer are something like 1/8 "without going without borders.  No matter what I print, I get approximately 5/8 "high and low and 1/2" on the sides.  I have this same problem when copying, that is simply built into the machine - no computer involved.  If I try to copy both side on a single sheet of double-sided sheets, it crops out of the margins to adapt to these ridiculously high default settings.

  I searched through the forums and found many others have this problem.  The son always look like this:

  Q: I have a problem with my margins.

  A: go to the tab 'Advanced' in the printer driver, then select "Minimize margins".

  Q: How do I do that?  I can't find this option anywhere...

  A:

  Q: Hello?  I still need an answer...

  A:

  Does anyone actually have a solution to this?  Or is HP just to admit that their big, fancy, expensive printer large format is just a big pile of uselessness of big margin?

  UPDATE:
  
  To try to solve this problem, HP went up to sell me a replacement printer reduced at a reduced price, even if mine was out of warranty. Their thinking was that I had a defective hardware. Unfortunately, new printer = identical questions.
  
  In the end, they admitted that margin problems are directly related to the duplex unit. Their duplexer requires, apparently, a LOT of paper to hang on to MUCH - in my opinion, possibly a lot and a half. I studied other brands and found that most of them have this same problem.
  
  Most of them...
  
  I finally found that printer large format of brother did a duplexer that keeps the small margin when you work 2 faces. So, I own one of these now - works great.
  
  I have been a fervent and loyal HP - ite for literally decades. It saddens me that they let slip until the brother surpassed them - but that's what I found. I hope that HP will turn around and stop to accept half-solutions such as 'negotiable' - but in the meantime, the only way to solve my problem was to jump brands...

• Printer Officejet 7612: scanning Officejet 7612

  When I put something to scan, it scans the entire page. So I have to manipulate away. The old HP printer I had would be size of the element for you instead of showing initially as a full page. It's 8.5 x 11, is what you would get. If it was 3 x 5, it's what you'd get. Is this normal for this printer. You always have to be scanned, and then crop to the size and rescan for the correct size?

  Hello

  Thank you for using the forum.

  You can actually set the page size of the document to be scanned.  (as shown). You can also click on "Automatic East" auto Guide document.

  

  For tips on using your AiO printer, do check out the following video:

  Scanning several Photos on HP AiO Printers (2015)

  https://goo.GL/Um22VK

  Thank you!

  Please click on the "Bravo Thumbs up" If this has helped you and 'Accept as solution' If this helped solved your problem.

• HP Officejet 7612: Problems scanning with Officejet 7612

  I try to scan at 600 dpi in my scaner but is not working, it say something about a connection problem.

  When I install it all first it kind a work, he said: the thing a problem conection but done analysis anyway.

  I can scan at 300 dpi, no problem, but I really need of the 600 dpi or at least 400 dpi, which is not an option.

  Anyway to fix this?

  Hello @Barberi, thank you very much for your answer.

  It looks like a problem with the drivers on your computer. Follow the instructions below to completely uninstall the current drivers and reinstall the MAC OS 10.11 drivers.

  • Click on 'Search' in the Dock.
  • In the menu bar, click OK, click Applications, and then open the HP or Hewlett-Packard.
  • If the HP uninstaller program is located in the folder, double-click it, and then follow the on-screen instructions to uninstall the software.
  • If the HP uninstaller program is not in the folder, go to the next step.
  • Click and drag the HP or Hewlett-Packard folder to the trash icon in the Dock.
  • In the menu bar, click OK, click go to folder, type/Library/Printers, and then click OK. The Printers folder opens.
  • Click and drag the HP or Hewlett-Packard folder to the trash icon in the Dock.
    Restart the Mac.
  • Right-click or Ctrl + click on the trash icon, then select Empty trash.
  • Then go to http://hp.care/2cyaSUh and download the MAC 10.11 drivers and install them on your computer.
  • So try and scan using the new scan application installed with the drivers.

  Let me know how it goes!

  See you soon

  Please click on "acceptable Solution" on the post that solves your problem to help others to find the solution. To show appreciation my help, please click "Thumbs Up icon" below!

• Gray printing Officejet Pro K550 problems

  Hello.

  I use a HP Officejet Pro K550 (STD) as well as a new Acer Veriton PC, equipped of Windows 7 Professional 64-bit O.S.

  For normal printing, up to today, it works well, but they are a couple of days, instead, if I print an image, by selecting the "Gray Scale" - high quality option in the printer properties, everything that fate, causing printed in RED scale!

  If instead, I select 'Gray Scale - only black ink', it prints normally.

  What is going on?

  The cartridges are always at the right level (Black XL just replaced) and even after using the utility Scan Doctor, it seems everything is OK... but this isn't reallly so OK.

  What can you tell me?

  I have to print several copies in the next few days and wouldn't no more free time, paper and inks...

  Thanks for the help!

  Hi robevix,

  Welcome to the Forums of HP consumer printer.

  When using gray scale - high quality, he used some color to enhance black. You can browse some general troubleshooting that might help solve the problem:

  http://support.HP.com/us-en/document/c01956550

• Printer Officejet Pro 6830: problem with printhead

  Where can I find a solution (repair or replacement) the problem with the printhead?  Call to Staples made me a call to HP and an automatic reply back to www.support, that got me nowhere.

  This is my first answer on this issue known.  Followed by replys supported.

  Read it here, as your warranty would cover the Exchange.

  More information on the trade.

• HP Officejet 7612: Also how wireless connect my laptop to my printer? (Already connected Dell desktop computer)

  I just bought a printer Officejet 7612.

  I have setup my Dell desktop (windows XP, ASUS router) with a wireless connection to the printer successfully.

  My Dell desktop computer is connected to the router via a cable ethernet ASUS.

  I thought that my laptop (Fujitsu T900, windows 7) would automatically see the printer; but it doesn't work.

  The laptop connects wireless to my ASUS router to access the Internet.

  For my laptop see the printer Officejet 7612 - do I also need to install the software suite Officejet 7612 whole on the laptop (as I already did on my desktop Dell computer)?

  Thank you once more!

  (I apologize in advance because this is probably a stupid question

  Hello @Scooby777,

  Welcome to the HP support forums.

  Certainly not a stupid question.

  The answer is: Yes, you need to install the software on all your devices.

  You can also choose to install the base drivers.

  Base drivers will give you all the features of the printer.

  If you need additional assistance, please let me know.

• Officejet 7612 paper size difference

  Hello

  Recently, I got the "Paper Size Mismatch" error on my printer Officejet 7612 large-format.

  I don't understand where that came from and impossible to find a solution to fix it. I use the same paper ~ standard 8.5 "x 11" printer paper ~ and I have always used programs. Have not changed the settings in the software I use to print and even uninstalled and reinstalled the software and drivers on the HP site.

  I have even been able to print a document today without problem, then without changing anything, tried printing the same document and got this error. There is no way to work around this error and print documents. Normally, I choose the option of the letter in the drop size of paper. But tried also to A4 and legal with the same results.

  Is someone can you please tell me if there is a fix for this. I see a lot of complaints about this error, but not a lot with this printer model.

  Thank you

  -Dean-

  I think I discovered why I get error mismatch paper size.

  I use Paint.net to edit and print images and recently installed a plugin pack for additional editing options. The instructions said to drag the .dll files in the effects folder where Paint.net is installed. I didn't have the link, but it was around this time that I started getting errors.

  I uninstalled and reinstalled Paint.net and used a good installer to add the .dll file in the program folder. I have not received the error since.

  I thought it was important to mention this for people who have been recently installed or updated a program, or use Paint.net as their image editor. Thank you all for your comments and advice.

  -Dean-

• HP Officejet 7612 pilot error issues.

  I recently bought a HP Officejet 7612 all-in-one printer and it connects to my wireless network and when plugged directly into the computer with a USB cable, the computer recognizes it as a 7610 and then windows search for drivers, unless a driver is but the printer is unable to connect to the system.  The installation disk supplied with the printer is a 7610 model.  I tried to go online to HP and download the drivers and the error message still appears. I bought a 7610 in June and the printer immediately hooked to my wireless network and working properly without any problem of driver.

  I have to the best of my knowledge through all the troubleshooting steps HP recommends at least twice with the same results.  I tried updates, patches, everything that can update the software that came with the printer so that it can connect.  Always the same result.  It can not connect through the wireless and wired, he can't download all the drivers. the wireless on the printer icon is on.  My operating system is Windows 7 Ultimate 64.

  Appreciate any help.

  Welcome to the @Learner35 forums.

  I would like to try and help you with installation problems you are having with your printer Officejet 7612 large Format and Windows 7. I have a few ideas in mind below for you! Also, the file name of the driver for the JO 7612 is OJ7610_971 - 1.exe, which is the suitable driver for your printer, just to clear the air on this.

  1. the printer uninstall: uninstalling the printer software

  2. If there is a problem of uninstalling, use this tool to uninstall: Microsoft Fix It

  3. restart your PC.

  4 run a scan on your PC: File Checker system to help to restore system files

  5 opt-out and re-registration the Microsoft Windows Installer service:
  1. click on the Start menu and type "cmd" in the search field and press ENTER.
  2 type "msiexec /Unregister" and then press ENTER.
  3. Type "msiexec/regserver" and then press ENTER.

  6. restart your PC and now perform a boot in Windows.

  7 reboot your PC once, temporarily disable your firewall and download and try the installation again:

  HP Officejet 7610 series full feature software and drivers

  I hope these steps you, help to have a wonderful Thursday

• HP officejet 7612: "There is a problem with the printer or ink system". That is the message, no error code.

  "Is there a problem with the printer or the ink system". The error message. Without error code. Original cartridges.

  HP has a center of service to Puerto Rico, where I live?

  Please tell me there is a solution for this problem.

  In the paper here troubleshooting steps can help resolve the printer ink system message justify Officejet 7612.

• OfficeJet 7612 - scanning in the Yosemite Mac problem

  Hello

  A few days ago, I bought an all-in-one OfficeJet 7612 and from the beginning I am not be able to scan to the computer (only to emails or usb).

  It's what I've tried and I get:

  1. Install the drivers and full software from the CD provided with the product: It appears to turn on the option scan to the computer . But whenever I try to do, a message in the iMac says: could not establish a connection with the printer.
  2. Download the last update on the HP driver support site: He always says that to computer scan cannot be enabled, and that I should download and install the latest driver.
  3. Installation using AirPrint printer: It recognizes the printer and even the fax feature, but never the scanner.

  I don't no what to do, it looks like there is no full support for my 7612 in Yosemite.

  Can anyone help me?, I'm doing something wrong?

  OK, I managed to do this work, that's what I did:

  1. Uninstall the HP driver through the uninstall program that comes with it.
  2. I deleted these two files from the: < youruserhere > /Users//Library/Preferences
  • com.apple.print.custompresets.forprinter.Officejet_7610_series.plist
  • com HP. DeviceMonitor.plist
  1. Restart the iMac (I don't know if that helped, but I did anyway).
  2. Install the printer using AirPrint.

  I deeply thank RnRMusicMan who was helping me through all this time trying to make this work.

  I hope this can help someone who found this problem too.

• HP Officejet 7612: analysis of problems after installing Windows 10

  After installing Windows (prior to Windows Vista) 10, scan documents with my HP Officejet 7612 became a hell of a job.

  Printing is no problem.

  With Webscan, I can only scan and save 1 page at a time, I can not scan several pages of the document 1 more.

  I downloaded "Extended Scan" but when I try to use this app, it says "year error occurred while scanning" without more information.

  With "HP Scan and capture" I can't scan the size of A3 paper full of documents and there seems to be no possibility to change the size of a3 paper. Maximum size is 'legal letter '.

  Same problem with "Windows Fax and scan."

  Are there other ways to recover the possibilities of full scan from my HP Officejet 7612?

  Hello
  
  Thank you for using the HP Forums.
  
  You can download and install the software COMPLETE features of HP printing for your operating system:

  The following resources will help you:
  
  HP printer install wizard for Windows
  http://ftp.HP.com/pub/softlib/software13/COL50403/MP-150580-2/hppiw.exe
  
  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.
  
  Hope that helps.

• folds of 7612-printer Officejet 11 x 17 Paper 3 "from the top when printing from my computer

  Name of product-Officejet 7612.  Operating system - OS X - Yosemite (10.10.1) for my desktop and OS X (10.6.8) for my laptop.  Problem when printing from a Mac machine in the Officejet 7612 on paper 11 x 17, it will always create a mountain/valley fold all the way across the top of the sheet about 3 "from the top.  The folds will be straight through.  Whether it's origami, it would be the perfect machine.

  When I print from the control panel of the printer (for example a printing of print quality, or something www.hpeprint.com like news or some other print it will print properly with no fold either.)

  It seems as if this in case of instructions from the computer to the printer to print, he gets in a hurry to get the document creating the folds, but when it comes to the machine itself, he picks up the paper gently.

  Any thoughts?

  Hi @Bodija ,

  I see that you have problems when printing on 11 x 17 size paper of Yosemite, but you can print the thin material and ePrint test page. I will definitely do my best to help you.

  When you print from the computer, you can print on letter-sized paper or are you just had the problem with the paper 11 x 17?

  Here is a document to clean the rolls of paper to see if that will help.

  A "Paper jam" error displays on the e-all-in-one printer large Format HP Officejet series 7610.

  Go to Solution 5: clean the rolls of paper.

  Using the full feature software drivers?

  Series 7610 Wide Format e-all-in-one-HP Officejet full feature software and drivers.

  Check the name of the driver that is installed by the printer. Make sure that it shows just the name of the printer.
  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (Officejet 7612)
  
  If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  

  

  If you still have problems with it is software related, try the following steps.

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  Try to print again.

  How the name of the printer was placed in printers and Scanners?

  If you need help, let me know.

  Have a wonderful day!
  Thank you.

• HP Officejet 7612: Printer reached its connection limit to the computer.

  Install us the printer HP Officejet 7612 for 20 computers.

  And we get the problem with the error:

  

  Please, help us, is there a limitation of this printer on the network?

  Hello

  Yes, some printers are supported up to 5 devices

  Kind regards.

• iPhone and ipad: printing from iPhone / iPad for HP OfficeJet 7612

  Just hooked up new printer HP OfficeJet 7612 to replace OfficeJet 6600. My iPhone and iPad easily prints pictures on 7612 via my wireless network but do not print anything else (emails, web pages, etc.).  This has never been a problem with the 6600. When I hit print, nothing happens. The website says that air Print will automatically work that she has done on the 6600, but not the new 7612.  What Miss me?

  Found the problem. I had to go into the settings of the printer and allow shared printing. Problem solved.