Printer will not connect to color cartridge

Similar Questions

• Printer will not connect via USB

  HP lj1022 printer will not connect not not via the USB port after the installation of the new driver upgrade hp lj1020/1022 for Windows 7 (64-bit). Driver seems to install properly until the moment where he is asked to connect the USB cable. Then he hangs up. HP lj 1020 printer appears in the display to the dashboard as the default printer. Computer recognizes the printer as hp printer lj1022 but in another "device not specified Panel when and only when the printer is on and the USB cable is connected." When printing, nothing ever comes from queue.

  Diagnosis is only that something is stuck in the queue and remove the task from the queue, but does not. Diagnostic shows no problem.

  The lj1022 printer accepts data from two other computers, as well on Windows xP and using the same cables. Three other USB ports have been tested on the new Windows 7 computer without results. The USB ports on the Windows 7 computer accept keyboards, mouse and flash memories wireless dongle without problem. The Windows 7 computer also sends data to a printer wireless with no problems.

  Hi Rmhodgson,

  Run the following utility below.

  http://support.HP.com/us-en/document/c02073861

• HP Officejet 6500 a: printer will not connect to the wireless network.

  I got this HP printer for a while and it worked fine.  Our old router is out and we had to get a new one.  Installed perfectly and printer continued to work properly.  The password for the router was ridiculous, that's why I changed it to something much more simple to remember.  Since then, my printer will not connect to wireless internet.  I have a ~ and reinstalled the printer but still have the same problem.  I thought maybe to try the former password would, but who does not work either.

  Anyone has any ideas that might help before chuck it and go and get a new one altogether?

  Thank you.

  Easy things first.  Turn off the router and the printer.  Turn on the router and wait 3 minutes.  Turn on the printer and see if it connects to your router.  Status?

  If no joy, temporarily disable all security in the router.  Now try to connect the printer to your SSID not guaranteed without password.  Status now?

  If OK, go back and add WPA2-AES with your simple password.  Status now?

• Lexmark printer will not connect to the router

  Original title: HELP

  I switched to Fios and now have a new modem/router and I don't know how to get my Lexmark printer to recognize. How can I solve this problem?

  Hello

  Thanks for posting the question in the Microsoft Community!

  The Lexmark printer will not connect to the router/modem.

  Because the problem is with the Lexmark printer cannot connect to the router, I suggest contact you the Lexmark support team in order to get help with this question.

  You can try to get help on the site:

  http://support.Lexmark.com/index?page=productSelection&channel=supportAndDownloads&locale=en&UserLocale=en_US

  If you need any help or if you encounter problems with Windows in the future, let us know and we would be happy to help you.

• HP deskjet 2540: HP 2540 printer will not connect to new router

  Hi, we just changed internet service providers and the printer will not connect to the new router, our HP laptop computer presents the printer in the list of network devices / wireless, but will not accept the password of network to the router when I ask him to connect. Makes me crazy! I have re-installed software etc. to connect the drive and make me anywhere I hope someone can help!

  Dave.

  Replacement/change your wireless router, try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

  Make sure that your router is set to a fixed channel wireless as the 1, 6 or 11, never 'auto '.  Try channel 1 first and then the other one at a time.  Make sure that the printer and the router are spaced at least 5 feet.

  However, if you have a gateway device (modem + router), all gateway devices are terrible for connectivity and wireless performance.   If this does not work, suggest you put this bridge in full bridge mode device and install your own router of high quality that YOU have full control over.

• Adobe CreatePDF Desktop Printer will not connect

  I tried to print a document online and a my computer word document. Whenever it says my Adobe CreatePDF Desktop Printer will not connect. Help

  Hi anthonyr,.

  The CreatePDF desktop printer has been removed, that's why you are unable to use it. If you wish, you can remove it by following the instructions in this document: Remove create Adobe PDF Desktop printer.

  Best,

  Sara

• V525W printer will not connect wireless

  I just moved and had to change my ISP.  Now, my V525W printer which was working fine, will not connect wireless.

  When I try to reinstall the printer, the program stops after I connect the USB "put in place by cable".  The CONTINUE button dark rest.

  I tried every suggstion I find on the Board for more than three hours and still not get this piece of junk to work.

  I have an all-in-one Dell XPS running Windows 7 machine.

  Can someone please?

  Rick,

  After a few "cooling off" days, I decided to TANOE this problem again and it seems that I finally work!

  I went in the menu on the printer and restore the default settings.  I always had the same problem with the Installation of the Dell program I went into the Windows 7 Control Panel and clicked on "Add a wireless device to the network."  He immediately recognized the printer and I followed the steps until the light green enabled WiFi fixed.   Then, I went through the installation of Dell again and was able to print, scan, etc.

  Thanks again,

  Tom

• HP 5530 Envy: Would print not; Software reinstalled now printer will not connect

  I printed 2 pages of a document and another need.  When I went back to try to print again, it got stuck and would not take the step to go to HP ePrint.  I tried 2 other times.  Then I cancelled all print jobs 3 and tried to print something different.  Jobs canceled is stuck trying to cancel, and the other document would not print.

  I checked the edits and reinstalled the printer software.  Then I unplugged the printer, and it wouldn't reconnect.

  I uninstalled the software, reinstalled, printer does not connect.

  Restarted the computer, printer does not have to connect.

  I had this problem before, but not for a while.  I guess it's a problem with Windows 10.  I was going to make the resolution of the problems, but it is configured for Windows 8.1.

  I ended up going to the support page for my printer, so the link that you sent in step 3 of solution 1.  I looked through the help desk, but they do not have my problem.  Then, from there, I stopped using these steps and went to the software and drivers link to see if something was missing.  It shows all of the software I have access to, but it is not very clear from this first page on what I actually need to add.  I downloaded the HP Printer Wizard and follow these steps, and now my problem is solved.  However, at the end of step 2, he said that if my printer was connected to the radio, I should stop troubleshooting.

  As I said before, it was not a matter of my printer is not not on my wireless connection.  When I double click the icon of the printer front and selected 'add a new printer' he would not this process.  The wireless never disconnected.  The rest of my computer just not see it.  While I was with the installation wizard, he says that most of the drivers were there but some elements were not, so that solved the problem.

  Thank you for your help.  Although not exactly what I asked, you still have the page that solved my problem.

• Printer will not connect, do not accept access code

  Hello

  I have a HP Officejet 4500 G510n-z.  We have been connected to a wireless network, then moved. We kept our same cable service, etc.  I tried to print from the same computer, but you get the status message that the printer is not connected.  The wireless light is on, I have turned off the power to the printer and the router, on again.  I have checked my router password and have tried several times to enter every other option password we have, but still not wrong password message.  I have Windows Vista and do not know what else to try.  Is there a way to completely circumvent the password option?  Thank you very much!

  Thanks for getting back to me. I have check the router password. I decided to uninstall/reinstall the printer and it is fine now.

• Dell968w printer will not connect to the network.

  It drives me crazy.

  I recently had to change the security key on my DLink router
  But this printer is not connecting
  How do I change or update the connection for the printer wireless?

  Thanks, I'm set. He was simply not connect to router because I changed the security key.

• printer will work if the color cartridges are ink

  I have an Officejet 4620. My computer says all the ink cartridges are out of ink. I can always print in black. I need to replace the color cartridges?   The printer uses individual cartridges for red, blue and yellow cartridges. Color will be printed in blue and yellow only, so I guess there is little color left.

  I usually do not need color copies and I have another Copier.

  Hello @Connsu,

  Welcome to the Forums of HP Support!

  I would like to help you today with your color cartridge application today. Because your printer uses four cartridges: HP 564 black, HP 564 Cyan, Magenta 564 HP and HP 564 yellow, if one or all of these color cartridges are exhausted replace them to continue using the printer. Your HP Officejets ink system is designed to print when have all ink cartridges. A little ink in each cartridge is used for maintenance and maintenance tasks completed by your printer to keep the print head system in your printer in good working order.

  The print head is the part that the cartridges will fit. It controls the "reading" of the cartridges and put the ink on the page. If the printhead is not able to perform regular maintenance, due to depleted cartridges, there is a chance that the mechanism of the print head gets dirty. If the printhead is damaged in any way a whole unit replacement may be necessary. For more information about using ink please click here.

  In the future, if you mainly print in black from the computer, you can set your printer driver to use black ink only. Normally when you print from your computer files will be sent to your printer as "images". If your printer "thinks" it prints an image file that ink color will be used to enrich the black ink. If you don't want that to happen, you can enable grayscale printing option.

  • How to set grayscale in Windows:
  1. Click on the Start menu
  2. Click on devices and printers
  3. Right click on your printer and select Printing Options
  4. Click on features or Advanced
  5. Select the Grayscale dropdown and replace Black Ink only
  6. Click apply and OK

  If you ever want to print in color that you just open the document to print, click Properties in the print dialog box and change black ink only on OFF. This setting only will change to print one job and will return to black ink only for future jobs.

  • How to set levels of gray on Mac:
  1. In the software application, click print
  2. Select your printer
  3. Click Paper Type/quality menu
  4. Click the triangle next to Color Options
  5. In the color menu, select Grayscale or black & white
  6. Select the printing black only ink cartridge
  7. Click print

  Please let me know if the information provided solves your color cartridge problems. I look forward to hear from you!

• OfficeJet Pro 8600 more: printer will not recognize this yellow cartridge has been refilled.

  The printer would not print because the yellow cartridge was totally exhausted.  I had all the colors of three cartridges filled at Costco and reinstalled the printer.  Still not printed - he continues to say the yellow cartridge is completely empty and must be replaced.  How can I do recognize that this cartridge has been refilled?

  Replace all cartridges per HP cartridges to see if it solves your problem. If so, suspect that the reloaded cartridges were damaged by Costco.

• Want 5540: Blue light blinks and the printer will not connect wireless

  Printer has been successfully implemented and operational, but today the blue light flashes, it does not connect to our wireless and will not be the same impression with ubs. I disconnected and reconnected several times and removed and reloaded the software, but the problem persists.

  Turn off the router and the printer. Turn on the router, wait 3 min. Turn on the printer and see if it connects to the router.

• Printer will not connect via WIFI

  I'm continually offered an update for my CANON MG3250 printer, I've now had 8 in the past two months, and all were successful. Now my printer doesn't work! that is, it does not connect via WIFI, but will work on cable? All ideas/solutions please.

  Hello Nigel,

  Thank you for your response.

  I'm sorry for the late reply.

  I appreciate your time.

  I suggest you to refer to this article and check.
  Reference:
  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1

  Please keep us updated.

  Thank you

• Printer will not connect

  Time Warner gave me a new modem, and now I can not connect my printer Brother wireless network. The router is connected to my destop and I can't connect it (IP 192.168.1.1) from the desktop. However, I can login to my devices (iPhone, iPad, computer laptop). If I enter the IP 192.168.0.1, it opens my cable modem.

  Brother says that I have to reset the printer network adapter. They told me to connect an ethernet cable from the printer to the router, get an IP address from the printer, open a browser, enter the IP address and press ENTER. I got a valid IP (192.168.1.6), but the Web management screen brother does not open. IE9 says it cannot display the page and Firefox Mozilla says it has expired. Brother, says that the printer works as it should. The problem is in the router.

  My printer gateway IP is 192.168.1.1.

  Is there a way to get the printer connected?

  Howard

  P.S. I am running Vista. Old computer and old router. Probably in time to get a new computer.

  Elaine,

  Thanks for your reply. I solved this. For some reason, my network does not recognize my printer on my desk. I have connected a USB cable from the desktop computer to the printer and print. My network recognizes my printer from my laptop. My printer print wireless from my laptop. My office is eight years old, probably has something to do with it.

  Howard