Printer will not uninstall

Similar Questions

• E-all-in-one HPOfficejet 8600Pro printer will not now speak to iMac since updates Driver & Maverick

  I just bought a new HP printer and set up on my iMac to print. After a LOT of messing around FINALLY got it works, BUT a day later upgrades arrived to update my iOS X 10.9.3 with a simultaneous upgrade of the software driver for the printer. I duly installed at once – but now, regardless of what I do the printer will not work. The computer can be seen as it is showing ink etc. levels and said he printed and I can print test pages, but it has not allowed me to print from Word, Excel, Web or PDF!  I tried to uninstall the printer drivers and reinstall those of the HP Web, which I suppose would be the 'old' - but still no luck. I need this job and am close to tears - any help would be appreciated. I also tried deleting and reinstalling Office for Mac... NB it prints beautifully and effortlessly to my husband's PC.

  Welcome to the LAG54 forums,

  I saw your post about not being able to use the printer completely after a few updates. I will do my best to help you with this!

  First, try the following steps:

  1. Mac OS X: how to reset the printing system
  2. Repair disk permissions
  3. Restart your computer
  4. Add the printer: full function and driver-OS X 10.9 Mavericks software

  I hope that does the trick! Let me know the results!

  Have a great Tuesday

• Brother HL-2240 printer will not print after installing Windows.

  original title: MS upgrade on Windows XP

  Help, please.  I installed the recent update of MS for XP and now brother HL-2240 printer will not print.

  KB982670 seems to have something to do with .NET Framework 4 Client Profile.  This update or Windows PowerShell have been updated "critical", then maybe you didn't need to get.  However, it's water under the bridge now.

  When you open the print queue, are shown print jobs as stuck there?  Just to make sure that the queue is cleaned, do the following:

  Open a command prompt window (start > run > cmd > OK)
  Type each of the following commands in the command prompt window and press ENTER after each line

  • net stop spooler
  • del "% windir%\system32\spool\PRINTERS\*.*" {answer Y when prompted}
  • net start spooler
  • output

  It's really only a shot in the water, but he could help and can not hurt to completely uninstall and reinstall the printer.  Follow the directions here: http://www.coribright.com/windows/Article_One.htm

  Get the complete installation package here: http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/dlf/000000/004500/dlf004515.html?reg=us&c=us&lang=en&prod=hl2240_us_eu&type2=1&os=7&flang=4&dlid=dlf004515

• Dell Inspiron 7520: Printer will not print multiple pages after upgrade to Windows 10

  I have upgraded to Windows 10 and now my HP printer will not print multiple pages. The printer is set to print documents from the spool. Thanks for any help!

  I uninstalled everything related to my HP printer (in the Device Manager: printers and print queues) and searched my computer for everything related to my HP printer and deleted stuff also. Then I reinstalled the drivers and software from the HP website. I have updated Java also (I have no idea how much this has to do with my impression). I have my printer is off and unplugged for one minute before Relighting. I restarted my computer and now it seems to be printing normally. Praise the LORD!

• Printer will not be installed.

  3520e HP printer will not installed yet is the scanner.  Whenever we turn off the computer, the printer seems to uninstall but the scanner remains functional.  I tried the troubleshooter without result.  Help!

  Wired or wireless?  What OS?  Please explain in detail your troubleshooting steps.

• I use Windows 7, I downloaded Firefox 17 it will not load I'll uninstall and it will not uninstall. When trying to go to a website I cant load xpcom gt

  I use Windows 7, I downloaded Firefox 17 it will not load I'll uninstall and it will not uninstall. When I use Thunderbird I try to go to a web site and get the error could not load xpcom.

  How can I uninstall this mess and start again?

  Go to www.getfirefox.com and download Firefox 24 (do not use Firefox 17 not supported) and install it.

• Printer will not connect via USB

  HP lj1022 printer will not connect not not via the USB port after the installation of the new driver upgrade hp lj1020/1022 for Windows 7 (64-bit). Driver seems to install properly until the moment where he is asked to connect the USB cable. Then he hangs up. HP lj 1020 printer appears in the display to the dashboard as the default printer. Computer recognizes the printer as hp printer lj1022 but in another "device not specified Panel when and only when the printer is on and the USB cable is connected." When printing, nothing ever comes from queue.

  Diagnosis is only that something is stuck in the queue and remove the task from the queue, but does not. Diagnostic shows no problem.

  The lj1022 printer accepts data from two other computers, as well on Windows xP and using the same cables. Three other USB ports have been tested on the new Windows 7 computer without results. The USB ports on the Windows 7 computer accept keyboards, mouse and flash memories wireless dongle without problem. The Windows 7 computer also sends data to a printer wireless with no problems.

  Hi Rmhodgson,

  Run the following utility below.

  http://support.HP.com/us-en/document/c02073861

• HP Officejet 6500 a: printer will not connect to the wireless network.

  I got this HP printer for a while and it worked fine.  Our old router is out and we had to get a new one.  Installed perfectly and printer continued to work properly.  The password for the router was ridiculous, that's why I changed it to something much more simple to remember.  Since then, my printer will not connect to wireless internet.  I have a ~ and reinstalled the printer but still have the same problem.  I thought maybe to try the former password would, but who does not work either.

  Anyone has any ideas that might help before chuck it and go and get a new one altogether?

  Thank you.

  Easy things first.  Turn off the router and the printer.  Turn on the router and wait 3 minutes.  Turn on the printer and see if it connects to your router.  Status?

  If no joy, temporarily disable all security in the router.  Now try to connect the printer to your SSID not guaranteed without password.  Status now?

  If OK, go back and add WPA2-AES with your simple password.  Status now?

• Firefox 4 will not uninstall

  Hello

  Something apparently is not right when Firefox 4 beta 9 installed on Firefox 4 Beta 8.

  My directories still say Beta 8, even if 9 Beta is installed, and 9 Beta will not uninstall.

  If you use Help > About updating your version of Firefox 4 beta 8, then the name of the installation folder to change. This folder name changes only if you download the full version and install this version.

  See can see the latest version of Firefox 4 via help > troubleshooting information

• After the upgrade to OS 10.11.2, Mac Mini is so slow that it can take an hour to operate and the printer will not scan.

  After the upgrade to OS 10.11.2, Mac Mini is so slow that it can take an hour to operate and the printer will not scan.

  When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

  Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

  Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• LabVIEW Terminal connects not to the EV3 EV3 software retail will be (but pilot LEGO will not uninstall)

  Windows connects successfully to the LEGO EV3 via USB or Bluetooth.

  However, the Terminal LEGO of LabVIEW 2015 do not recognize.

  I installed the software at retail EV3 for check and it * is * connect to the EV3.

  I'm trying to fix the "LEGO Mindstorms NXT x 64" driver, but it will not uninstall even if I uninstall everything of LabVIEW, including the module (input administrator rights when prompted.)

  I've been struggling with this days, and I need to connect my EV3 to teach my students LabVIEW.

  Any help is greatly appreciated! Thank you in advance.

  -Associate Professor Matthew,

  #Date: Thu, January 21, 2016 17:21:58
  #OSName: Windows 7 Enterprise Service Pack 1
  #OSVers: 6.1
  #OSBuild: 7601
  #AppName: LabVIEW
  #Version: 15.0 32 bits
  #AppKind: FDS

  
  21/01/2016 5:27:54.774 PM
  Coolish 0x00BA6193:
  c:\nimble\penguin\labview\components\mgcore\trunk\15.0\source\ThEvent.cpp(267): coolish 0x00BA6193:
  Minidump ID: 789e6f18-0e9e-4b10-8b46-c0dd7448d8d4
  $Id: //labview/components/mgcore/trunk/15.0/source/ThEvent.cpp#1 $

  We found it!

  Our IT Department has been able to dig up in the driver package and finally managed to uninstall.

  Something has been damaged and the pilot wouldn't uninstall correctly.

  This fixed the problem beautifully.

  -Matthew

• Support Assistant does not and will not uninstall

  I have HP Pavilion g series laptop running Windows 7 and used and fairly regularly updates from HP support Assistant.  Recently, whenever I try to run HP Support Assistant I get the message "HP Support Assistant has stopped working"

  When I continue and follow the link "Check online for a solution", nothing happens.

  I tried the uninstall programs and features in Control Panel, but it will not uninstall.  When the uninstall process early, I get an error message: -.

  "Error1316 a network error has occurred trying to read the file C:\Windows\Installer\HPSupportAssistant.msi.

  Uninstalling then rolls back leaving the program on the computer and it is still in the list of installed programs and features.

  Therefore, I am unable to do a clean install of HP Support Assistant. I tried to install on the version on my computer and get a message "the following file is already on your computer c:\setup\SP64126\Metro.xml you want to overwrite this file?  I click 'Yes to all' installation is over in a Flash and Assistant support still does not work. The same message reappears. A vicious circle. How can I uninstall?

  Thank you

  Hello

  What is the product number of the laptop?

  Try these,.

  Run this FixIt before performing the steps below.

  1. download the executable HPSA you product site (OR) click on the portable computer option listed here at the top right of the page.

  2 download and install 7-Zip.

  3. open 7 - Zip and browse to the executable file HP Support Assistant.

  4. right click on the OGANotifier_ENU.msi HPSA and select 7 - Zip > Archive open.

  5. a new window should open, showing a folder without a name.

  6. click on the icon of the snippet at the top of 7 - Zip.

  7. a window should open asking where you want to extract this file.

  Choose a location and name a folder to make it extracted.  For example, c:\users\username\documents\hpsa and this file without a name would be extracted from this place.

  8. in Windows, navigate to this newly extracted folder.  Click UninstallHPSA.exe, and then select run as administrator.

  Delete SP64126 C:\Setup folder if its seen here

  9. now that the uninstall program is run in administrator mode, REBOOT.

  10. once the system is back on again & loaded completely, go to the extracted folder.  Right click on setup.exe, and select run as administrator.

  11. follow the installer until you get a successful installation message.

  This would remove HP Support Assistant and reinstall it.

  Thank you

• My HP Photosmart C4100Series printer will not remove a previously requested printing package, and is now stop printing of other things. How to rectify it please?

  I was printing a document from page 52, and then discovered that I was not necessary. After printing, the printer will not remove the print request, therefore it prevents me to print other documents. How can I correct this?
  I turned off the printer, but nothing helped.

  Thank you for your help. Very useful, but I had already found the doctor of scan HP printer on the internet and it was so simple to use and also corrected the fault in a few seconds.

  However, once more, I thank very you much.

• My HP Photosmart C309g-m printer will not print after that automatic updates have been made last night.

  My HP Photosmart C309g-m printer will not print after that automatic updates have been made last night.

  What can I do?

  Printer in Windows problems: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

• MX330 printer will not print. power WiFi ok

  I CHECKED POWER and telephone lines the printer will not print, the printer is not reconigzed

  Hello

  • What version of Windows are you using?
  • What were the changes made before the problem occurred?
  • You receive an error message when printing?

  You can check these links:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  See also:

  Network printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Note: this link also means on Windows 7