Printing is enabled in the application example

Similar Questions

• I'm scanning in legal size docs. with my printer/scan/fax. The application of fax scan in windows 7 does not show an option to paper size for legal-size paper.

  I have a new HP with Windows 7.  I'm scanning in legal size docs. with my printer/scan/fax.  The application of fax scan in windows 7 does not show an option to paper size for legal-size paper.  I could do this on my old XP computer.  Microsoft forgot add parameters of legal size in this application?

  Hello notnewbee,

  Thanks for posting on the Microsoft answers Forum.

  You do not give the model of your printer/scanner/fax machine so I can't direct you to the website of the manufacturer of specifc. However, I would
  you go to the website of the manufacturer of your printer and download the latest drivers for Windows 7. Sometimes, if you use a driver that is not intended for your operating system, then your device can operate and install, but some features may not work.

  If they do not have an updated driver, then try the compatibility mode for Windows XP and see if your printer will work correctly.
  The information below will show you how you can make older programs run on Windows 7 here.

  If please reply back and let us know if this helps solve your problem or if you still need help.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I bought a plan of the student, but he is not be enabled in the application.

  So bassically.

  The problem is simple, try to solve it, it gave me headaches...

  So in my Adobe account, you can see that I have a Plan of the student teacher. (Photo1).

  But in my application cloud creative, you see that he has not activated (Photo2) and whenever I try to put the licensed software, it says that I don't have a license...

  But in Photo1, you can clearly see not that I have a plan of the student teacher.

  The creative cloud app is on the same email that my Adobe account.

  I tried to reinstall everything and nothing works... Please I need your help soon, because I need it for school.

  My school has already started: S

  Hello

  Please, try the steps below and see if it helps, there could be software of third parties in conflict with it:

  • Please check if you have installed browser security extensions, please disable them. (For example: AD BLOCK, Advisor to Mcafee website, toolbar of internet security etc.)
  • Disable the firewall of your machine, see Windows Firewall enable or disable - Windows help , OS x: about the application firewall - Apple Support
  • Turn off the firewall of the security program installed on the computer Internet.
  • After this sign off cloud creative app connect and disconnect activate Cloud Creative applications
  • Force quit Adobe all activity monitor processes / end of task from Task Manager in the case of windows (for example, CC, Core sync, the broker CC library, Office, Adobe, Adobe CPI, demon Adobe Crash etc..)

  MAC-

  Right-click on the icon in the Finder and select the 'Go - To' folder option.

  You will get a text box, type in the following command and then press the 'return '. ("Not to be missed ~ symbol")

  ~/Library (It will open the folder of the user's library.)

  Then go to the Application Support > Adobe > trash folder OOBE and AAM Updater folder so

  New > right-click on the icon in the Finder and select "go to" folder option. > you will get a text box, type in the following command and then press the 'return '.

  / library (It will open the library system folder.)

  Then go to the Application Support > Adobe > rename SL-STORE like SL-STORE_OLD

  WINDOWS-

  C: \ directory Users\ ------AppData\ Local\ Adobe\ trash OOBE and AAM Updater folder

  C: \ Program Data-Adobe\ rename the SL-STORE like SL-STORE_OLD

  • Empty the trash
  • Launch the creative cloud and connect to connect and disconnect activate Cloud Creative applications

  Also do this where it's a windows machine:

  (1) open Control Panel and then click on the network and Internet"" option.

  2) click on Internet options, click on the tab "connections".

  (3) in the 'Connections' tab, select 'LAN' settings, you will be able to view the LAN settings box.

  (4) check the box-"automatically detect settings" and then "uncheck" all the other boxes as "configuration Script auto use", "Use a proxy server," proxy server ", then click on the ok button."

  5) click on the "Network settings" button once again, make sure that "automatically detect settings" is the only option selected, open the LAN Properties window.

  Let us know if that helps.

  Kind regards

  Bani

• Failed to initialize the Application example in Hyperion Planning

  Hello
  
  I'm new on Essbase and Hyperion EPM system 11.1.1.1.0 and I'm trying to test the functionality of planning. I have installed and configured the EPM system, and when I run the Diagnostics of the EPM system, everything is successful unless connecting to Essbase Studio Server (which is a separate issue from another thread).
  
  I'm working with the example of planning application included with the installation. I followed the instructions given here from the blog of John Goodwin, but I encounter an error when I try to initialize the sample application. I also tried creating the application through the workspace, which is documented here. I get the same error during initialization of the sample application.
  
  I get the error message said: "failed to initialize the sample Application. See the log for more details. "Where this journal of planning? I'm running on Tomcat.
  
  When I try to create the database, following the blog of John, through the Administration > manage the database > Create, I also am getting an error on step 18 of 21: [console] verification of member formulas. The error reads as follows:
  
  com.hyperion.planning.olap.HspVerifyOutlineException: check the plan failed with the following errors:
  Error [1200497] discovered in the formula of Member for "411100" members
  Error [1200497] discovered in the formula of Member for "412100" members
  Error [1200497] discovered in the formula of Member for members "412200."
  Error [1200497] discovered in the formula of Member for "451000" members
  Error [1200497] discovered in the formula of Member to Member "501111".
  Error [1200497] discovered in the formula of Member to Member "501112".
  Error [1200497] discovered in the formula of Member to Member '501130.
  Error [1200497] discovered in the formula of Member to Member "501240".
  Error [1200497] discovered in the formula of Member to Member "501250".
  Error [1200497] discovered in the formula of Member to Member '511200.
  Error [1200497] discovered in the formula of Member to Member '511300.
  Error [1200497] discovered in the formula of Member to Member '511400.
  Error [1200497] discovered in the formula of Member to Member "511500".
  Error [1200497] discovered in the formula of Member to Member "511600".
  Error [1200497] discovered in the formula of Member to Member '511700.
  Error [1200497] discovered in the formula of Member to Member '511800.
  
  What should I do to get this application example upwards and running so I can see what he does?
  How to initialize the sample application?
  Why can't create a database correctly (without the above error), so I can then load data into the database of the Consol via the Essbase Administration Services Console? Currently, the outline in environmental assessments do not check (it gives me the same list of members of the above error messages), and so I can't load the sampleapp_data into the database. If someone saw, please help. Thank you.
  
  -Scott

  Hello

  If you remove the application, back, restart schedule, create the sample application again and initialize you should be fine, then you can return the clock to its normal state.

  You always make the changes on the side planning and when you refresh these changes will be pushed to essbase (which you can see with EAS).

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Unable to deploy the application example of planning

  Hi all
  
  I'm trying to deploy the planning application model with the help of the OBE 11.1.1.3. When I click on finish, I get an error like below:
  
  «Year error occurred while processing this page.» Check the log for details"
  
  I checked all my services are up and actually I am not able to understand the origin of trace the error information. I checked in the logs folder, but was not helpful. Please advice how to solve this problem.

  Hello

  If you are on windows, check if something is happening in the following paper:-\Hyperion\logs\services\HyS9Planning-sysout.log

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• recognition of the application via the Task Manager

  If my 2 applications are run on the server and by any means that this system locks into place... and now I want to stop only one request by the task manager then how to recognize that, as in the Task Manager I wud see only esssvr.exe for both...

  Hello

  You can do it by the process id in the go Task Manager to display the select columns, check PID.
  One way to match is looking in the essbase.log - you will see entries like
  Start the application [example] with the process id [6988]

  Try to use the microsoft process Explorer, it will identify the process much easier.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Who hide or minimize the applications on the touch screen for HP Photosmart 7525 printer?

  Although I might decide to use the apps I prefer not to look at whenever I print.  Is there a way to reduce or damp them?  They appeared after I pressed the calendar button during installation.  If I knew what would happen then, I would have avoided this button.  I know how to remove them completely.  This could be the final step.  Thank you

  Hi gdwalker100,

  I understand that you want to delete apps from your printer.  I regret that applications cannot be completely removed from the front of your printer.

• LJ m3035xs: Fastres 1200 is enabled on the printer, but not an option on PC

  I am trying to print black and white images on LJ m3035xs. It is print I only have the option of 600 x 600 which is terrible.

  For the quality of printing on the printer, FastRes 1200 is enabled. On my pc when I print images, the only available resolution is 600 x 600.   I have PCL6 universal driver.  How can I fix it?

  Have you tried the pcl5 the driver version? I would also try a PostScript driver.

• Try to install the Epson printer and scan - error msg application not compatible escndv is not compatible - I downloaded the drivers to day-help!

  Try to install the Epson printer and scan - error msg application not compatible escndv is not compatible - I downloaded the drivers to day-help!

  [Moved from the community centre of Participation]

  Try to install the Epson printer and scan - error msg application not compatible escndv is not compatible - I downloaded the drivers to day-help!

  [Moved from the community centre of Participation]

  Hello

  What version of Windows are you using?

  What is the model of the printer?

  See related thread

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/escndv-is-incompatible/a1521e27-f6dc-4c9c-B990-b98c721c74a1

  Have you tried to install the drivers using the Compatibility Mode?

• Cannot install my printer/error message-unable to create the object print dell v505, that the printer is not compatible with a polcy enabled on your computer that blocks NT 4.0 drivers (1930)

  Original title: cannot install my printer error message

  I am trying to install my printer to dell v505 from the factory disc and get this error message: failed to create the object print dell v505 printer is not compatible with a polcy enabled on your computer that blocks NT 4.0 drivers (1930)

  Any help, need a lot.

  Hello

   
  1. what version of Windows are you using?
  2 did you the chnages in the computer before this problem?
   
  I would suggest trying the following methods and check.
   
  Method 1: Run the fix, install the printer and check
  Diagnose and automatically fix problems printing and printer
  http://support.Microsoft.com/mats/printing_problems/
   
  Method 2:
  Error message when you try to connect to a printer in Windows Vista: "the printer driver is not compatible with a policy enabled on your computer that blocks NT 4.0 drivers.
  http://support.Microsoft.com/kb/931719
  Method 3: Install the printer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.
  http://support.Microsoft.com/kb/929135
  Note: Please, go to step 7 of the Kb to maintain the computer to normal startup.
   
  You can download the latest driver for your printer from the link below.
  http://www.Dell.com/support/drivers/us/en/04
   
   
  You can also check:
  Printer driver is not Compatible if a policy is enabled on your computer.
  http://support.Microsoft.com/kb/282011
   
  Error message when you try to connect to a printer in Windows Vista: "the printer driver is not compatible with a policy enabled on your computer that blocks NT 4.0 drivers.
  http://support.Microsoft.com/kb/931719

• Recently, I got a message saying ' not enough system resources to open the application' for example to explore or outlook express.

  ?? Resources

  My computer has been works well, but twice recently, I got a message saying ' not enough system resources to open the application' for example to explore or outlook express. Restarting it works again, but why the message?

  Hi RaymondWilson,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.

  Method 2: Perform a System Restore and check the issue persists.

• Problems with Vista OS SP2 after automatic updates: using OneCare; application of integrated keylogger HP CPU "HP SDP" made by IBM in Durham, North Carolina (?); corrupted Samsung print driver downloaded from the website of the company

  Entered possible hacker:

  1. techie OneCare WINS access - probably not unauthorized and do not believe it causes always provided a quality service, but they have had access in the past.

  2 HP technicians - have had access to my computer once - did a good job with computer crash (not sure cause), but tried to sell me more HP products when I have no money...

  3. after the technicians HP did good job with crash, started to have pop-ups keep HP application that appeared as an add-on that works without permissions on my computer. Google the name of the HP SDP application > recovered information said program is IBM in North Carolina. Called them. Nobody gives any information on the program until I got ahold of a person who gave me the phone to techie Dept. It took all day. Not have not yet contacted technology because they have closed before I could call.

  4. called HP to inquire about the search info from HP SDP. on his goal? HP said he works as a keylogger you sell stuff. But what was weird is after the system crashed and repaired, there was one day that he has opened three times in ten minutes! The behavior of the application has changed after my OS has been repaired. Then after that I indicated HP where I found information on this program, the program disappear from the list of "run without permissions" in internet options explore > manage add-ons > run without the permissions list

  5. one day, I'm working on a word document, and the printer stops abruptly, impression. No amount of turn, or by clicking 'Cancel' will get doc from the printer queue. MS literature said this could be a security issue. The printer says "printing of documents", but no printing at my end.

  This problem is compounded when I delete browsing history and try to refresh the internet Explorer. That activity seems to take pieces of the program Samsung printer with it, even if I had excellent results in the past with Samsung printers and their downloads, and I never had the damaged printer driver to exercise this activity in the past.

  If I didn't have a short term in the Court of appeal in a week, I would say it's a question of OS, or program problem, but it's as if something falls down as soon as another issue is fixed and the unusual behavior of the computer, more timing and the purpose of the brief to me 90% sure that this is a pirate or a virus the surplus of the Samsung driver deleted pieces being left on my machine after uninstall.

  Dear Karena R,.

  Thanks a lot for your excellent advice. The Techies MS OneCare fixed the popup of HP before I read your message. (I was remiss to check my email...). I'll follow the instructions you sent me and am running the OneCare security right now, online scanner that I already know an excellent and effective tool because it has repaired my MS operating system and programs after that I accidentally deleted parts of the operating system by removing a .dll file, I need or such a thing! I also wanted to thank you for the information about the object of the HP SDP pop-up window. I saved your instructions on how to remove this case, the pop up appears again. One thing I noticed is that, after removal, some keys on my keyboard don't work, and I've read that other HP users encounter the same problem with the keys on the keyboard. The keys that seem to be affected are the keys that automatically open and close the door of the CD burner. Not a problem, because it is another way to open and close the drawer. It's one that HP must improve. In regards to your advice on the printer driver you have been 'right on' new! I reinstalled the driver using my own CD (not the latest driver, but one that works!) I think that the problem with the update of the Samsung driver that I downloaded from the Web site doesn't have some kind of problem. It is very unusual for a driver to Samsung, because I got excellent results with printers Samsung and free updates downloaded from their Web site. The first Samsung printer I had worked so well, for so long as the small rubber roller that takes the paper and it feeds through the printer wore out until the printer is, literally in a 100,000 pages printed after that I bought for about $80.00 dollars! So, I went out and bought another one, and that's what I use now. The printer works fine now, except for some reason, the icon in my taskbar notification area, allow to check the printer the status of jobs, cancel or repeat printing as before. Once. from time to time, a job stuck in the queue for the printer and will not erase unless I unplug the printer from the central unit. Nor will it print. But since I reinstalled the driver, this has happened only once. With the downloaded update, it happened all the time. It is possible that my OS is misconfigured, but I started to run the routine tune ups and analyses using OneCare and unless I used to defragment. I learned that the defragmentation of the hard disk too can cause problems also. The last thing is, I think that sometimes, tiny files needed to run my OS and files other programs can be sent to my temporary folder by accident. MS still once, All_Knowing computer, somehow recognizes the files I need and pushes me to ignore them, but perhaps it does not work for non-Microsoft like Adobe programs. I will use the link in your message to run the fix with the printer driver just to see if it works. If it is not the case, I can always reinstall the driver with my CD that came with the printer. Thanks for the excellent and informative tips and forgive me if I do not respond sooner!

  Sincerely,

  E-mail address is removed from the privacy *.

• I can see the printer in the application (Photosmart C7280) but the "print" key seems to be gray

  I use the HP homeandbiz app on my iPad, the app recognizes my HP 7200 printer and seems to let me select it, but the "print" key does not work. There is a small circle, red next to the printer in the application - this important?

  Hi DaveTlp,

  It seems that the printer has been associated previously but is not currently available. Make sure that the printer is turned on, your ink levels are ok and make sure that both devices are on the same wireless network. If the problem persists, I would like to power cycle both devices and see if that helps.

• Host of the print driver for 32 bit applications has stopped working (v515w) - cannot print in addition to the test pages

  My printer is Dell v515w Red

  Currently, I can only test pages print.  When I try to print from any other application, I get this error-

  Host of the print driver for 32 bit applications has stopped working

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: splwow64.exe

  Application version: 6.1.7600.16385

  Application timestamp: 4a5bd3ca

  Fault Module name: ntdll.dll

  Fault Module Version: 6.1.7600.16559

  Timestamp of Module error: 4ba9b802

  Exception code: c0000710

  Exception offset: 000000000006e3f9

  OS version: 6.1.7600.2.0.0.768.3

  Locale ID: 1033

  Additional information 1: 3edf

  More information 2: 3edf0feac74021b377b392a0115d74c0

  Additional information 3: bf41

  Additional information 4: bf41409fee27240aa0d3cd0ee9bc9fa9

  I've updated through microsoft and dell and some solutions.

  What is a dell problem or a problem of microsoft?

  My features are-

  Studio Dell XPS 1645, Win7 64 bit, IE8

  extacy1375,

  Unplug the printer.

  Uninstall the printer.

  Restart your computer. Make sure that the printer is deleted. Driver Manual printer removal

  Download 64-bit Vista drivers and save them on your desktop. Install the drivers for Vista 64 bit in compatibility mode.

  Links to the 64 bit Vista drivers are to...

  Wireless printer Dell V515w All In One Printer - owners (RED) wire

  Rick

• Host of the print driver for 32 bit applications has stopped working. Why?

  Host of the print driver for 32-bit applications has stopped working msg apear when giving the print on my RICOH printer N/W command. Why?

  * Operating system: Windows 7 64 bit * 32 bits of MS office 2010 * Print driver 64 bit PCL6 * Adobe Acrobat Reader x.

  SPLWOW64.exe event name: BEX64

  Please give a solution.

  Hello

  (1) did you do changes on the computer before this problem?
  (2) what are the types of documents that you are not able to print?
  (3) is the issue limited only with the Microsoft Office program?
   
  Step 1: Test the problem to the boot to check if it is a question of software conflict. A clean boot to check if startup item or services to third-party application is causing this issue.
  Try to install the updates in clean boot mode, and check if the problem still persists.
  You can read the following article to put the computer in a clean boot:
  http://support.Microsoft.com/kb/929135
  Note: After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.
  Step 2: Download printer driver last OEM
   
  Step 3: Uninstall printer related software l and features

  un) go Panel.

  (b) select Uninstall a program under programs and features.

  (c) click on printer drivers , and then click Uninstall.

  (d) wait until the process of uninstallation is completed, restart the computer.

   
  Step 4: printer installation and driver when prompted then only connect printer and check if it helps.
   
  If the question is limited to Microsoft Office, I suggest to return the items listed below and check to see if they help.

  How to troubleshoot print failures in Word 2010, Word 2007 and Word 2003?

  http://support.Microsoft.com/kb/826845

  How to solve printing problems in Word 2010, Word 2007 or Word 2003?

  http://support.Microsoft.com/kb/826862

  Hope this information helps.