Printing-Officejet 6500 problem

Similar Questions

• My printer officejet 6500 E709n is locked.

  my printer officejet 6500 E709n is locked.  He has a job in Quebec that has been

  in the process of deletion and frozen.  What should I do?

  Hi, you can restart the computer it must clear the print queue.

• color printing with hp officejet 6500 problem has more

  Unable to get the printer (hp officejet 6500 a plus) to print in color.  Impossible to copy in color

  Hello

  ·         What exactly happen when printing?

  ·         Were you able to print earlier?

  ·         Have you checked the color cartridge to check if it is empty?

  You can view the following items and check that it works.

  Printed colors may not match the colors on the screen

  http://support.Microsoft.com/kb/282897

   

  Resources for the resolution of the printer in Windows XP problems

  http://support.Microsoft.com/kb/308028

  Let us know if that helps.

• Printer Officejet 6500 E710n-z of printing error problem?

  For the printer HP Officejet 6500 E710n-z all-in-One series

  Linksys - Cisco router wireless

  Operating system: Vista

  Desktop

  When I try to print it just says: error?

  My old router crashed so I replaced it with a new Linksys E2500 (Cisco) Advanced Dual-Band N Router.  I used to use a wired connection to my router to the printer, but it would not connect with the new router.  So I uninstalled the printer and reinstalled as wireless.  The router and the printer, use the same IP address.  I can see the printer & when I go to print anything, it's in the list of printers.  But after clicking OK in the print page, nothing happens & when I check the State printer through the Panel of order status says "error"?

  Any ideas/help would be greatly appreciated...

  Thanks for the reply!  I finally got to work.  I'm not sure of what really was the problem, but I ended up uninstalling twice and then put it back and he finally found.

• Scanning with Officejet 6500 problems

  My Officejet 6500 printer will scan only from my computer when there is a usb cable attached. Remove the cable, no sweeping. FRO the last 2 weeks in HP Smart people have been scratching their collective heads trying to solve the problem. Is there anyone else with this problem. Maybe we could all have a collective scratch! 2 weeks of my life on this Arghhhhhhhhhhhhhh

  Dear Scratchmyhead,
  
  I have the same problem with the same printer.
  Indeed, it is the error through the programming of the two-way communication via Wifi.

  There is error on HP sid, and they do not have a solution.
  There is a simple solution which is somewhat tidious, but it allows you can scan to receive ink levels wireless and wireless.
  On your printer, go to;
  Configuration > network > view network summary > discovers wireless

  On this page, you will see your printers IP address. Write this down (or remember).
  Return to your computer, open a new tab in a web browser. (IE, Firefox, Chrome, etc.)
  Enter your printer's IP address in the URL bar.
  It takes you to a page that says:

  "Officejet 6500 E710n-z.

  It's your "Built-in Web server" printers

  If your printer is connected to your network correctly, you should see;
  
  Status: loan

  The estimated ink levels: *.

• Printer Officejet 6500

  I have a HP Officejet 6500 wireless and after I replaced a black cartridge yesterday he came and said put paper then and we say an incompatible prinhead.  I have the cleaned than the printhead according to the information, but it looks like it is still not working.  I only use HP products and this printer is about 3 1/2 years.  This is the General lifecycle for this printer.  I am very disappointed and probably will find it cheaper to buy a new.  I searched the site, but I am unable to find the cost of the print head.  Someone at - it ideas

  There is a document, it seems that you both have done most of the, that helps them solve a problem of print quality.  The document can be accessed here.

  As you both are probably off warranty, based on the information provided, then we have a few options at this point.

  (1) we can try the workaround provided by Bob_Headrick in this thread.

  (2) you can buy a new printhead for the HP parts store using the product number CN643a.  Currently, it sells for about US $ $70.

  (3) you may look into buying a new printer.  Be sure to call the HP Technical Support on the upgrade program where you can buy a reconditioned model printer newest, with guaranteed full factory, at a reduced rate.

• Printer Officejet 6500 misses the beginning of photography on thick photo paper

  I have an all-in-one officejet 6500 (E709a). My office is running Win7. I felt for a year or two and initially he printed on paper photo well, but he does NO more.

  I use a kirkland photo paper, professional glossy inkjet paper, and it says on the box of paper in that it is 69 lb 255 g/m2, 10.4 mil 8.5x11. From what I could read in the HP specifications, 255 g/m2 is supported (I think I saw it supports up to 260 or above), but has not seen a specification for the thickness. In any case, at the beginning, when it was new - it worked. Now, it's bad causign.

  \When I print a pidcture, say printing full page and I remplir fill in the printer menu, select "printing photos with white frame" the size of the paper, mentio0n it of "another photo book" and ask for the 'best' quality, and I put a (also tried to put more) page, sometimes it won't pull the paper in all, and sometimes it starts pulling on the paper after the head already done a few scans which means that the image loses almost a full inch of his debut.

  What can I do? of course, work with plain paper I have no problem, and if I go to 'best' to normal, my success rate is improving but is still far from perfect.

  Y at - it cleaning to do? some rolls must be replaced? or what? It is VERY frustrating that the printer cannot handle these quality papers as it should!

  Help...

  Thank you

  Arik

  Try troublshoooting not on this page.

• Of Scanner all-in-one Officejet 6500 problems

  Hello

  I have a brand new Officejet 6500 that prints, faxes and copies without fault.  It is connected wireless to two different computers.  However, for the life of me, I can't scanner at work - and the errors are the same on both computers.  No matter what I do, the scanner software opens and begins to work, but the scanner itself doesn't do anything (no noise, nothing) and eventually I get message and error that says "Scanner Error" with a bunch of steps to try to fix.  I tried ALL the steps, restart the software, reset the printer, unplug, re - connect, re-boot and even re - install the software - still nothing.  Once I even put in place via a USB cable just to make sure it wasn't a wireless issue, and is not; I had all the same mistakes.  I spent two hours on the phone with HP tech support and after changing a bunch of firewall and other security settings, still nothing.  I don't have anythign fancy; just Windows XP, Windows Firewall, McAfee Suite.  Any idea what could possibly be the cause of the errors of the parser and why there is no communication between the computer and the scanner?

  After countless hours to suck his soul troubleshooting with alleged HP 'Technical Support', at least I managed to reduce this problem down myself and find a solution that works.  I found that the problem of scanning don't occurs if the printer OR the computer is connected to the wireless network.

  The solution is to TURN the wireless RADIO and connect to your network via an ethernet cable.  Then try to scan with a computer that is connected to the network via an ethernet cable.  Note that this will NOT work if each connection - printer to the router - or computer to the router is connected wireless; It takes the two connecitons via an ethernet cable.

  This is obviously a software problem that HP does not and will never be resolved.  So, if there is no way to connect your AIO to your router with an ethernet cable (for example, if the priter is in another room), you're SOL and should probably try another printer that HP will never solve this problem.

• HP printer Officejet 6500 a Plus

  I bought a new printer and want to get rid of my old printer (HP Officejet 6500 a Plus).  My question is: is there any reader of memory in the printer I'm tossing or is it just just to throw it away?

  Hello
  
  Thank you for using the HP forum.

  You can restore the default printer.

  Theres no hard drive on the PC but if you don't save any number of fax on this subject, you may want to delete that.

  Usually, we cut the strip of coding, break the glass of the scanner and cut other visible wires before disposing of it so that the printer is "beyond economic repair" for anyone who can pick it up.

  Hope that helps.

• HP Officejet 6500 a: HP printer Officejet 6500 a is inactive and will not print

  I have a HP Officejet 6500 has everything in a printer.  I recently moved to a new home, so new wireless IP address, I think that I have configured correctly according to the directives of the printed Test page.  I also have a key USB connected to print, as I hardline so when in my office for heavy work. The printer says inactive, and I can't print.

  You're welcome, I'm glad that's settled.

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• Printer Officejet 6500 E709a wire to the router via USB

  Can I connect my Officejet 6500 E709a via the USB connection to my router 9100EM Ultraline series 3 model so that it can be seen by both of my PC, which is connected directly to the router via LAN Ethernet ports? If so, what measures are necessary? At the present time, the printer is connected via USB to a PC and the other PC cannot use the printer, unless the first PC is on.

  I gave up on the online software update from HP for the Officejet 6500 E709a and removed it. So, I just use my old CD to install the printer, this time to install it as a printer wired ethernet, which worked. Thanks for trying to help.

• Printer Officejet 6500 has not detected by routers

  I have a wired network printer HP Officejet 6500 E710a-f. The printer is installed and runs on a network at another location. He has worked on Linux and Windows machines. I have moved and have tried to connect with two different routers. No router "see" the printer. The Panel Network icon is not lit. I can't put a static printer IP address as he always comes back to "automatic" and it sees "no link". Needless to say that the printer is not detected with the HP software (I used Linux and Windows 7 Pro). I can set it up as local USB printer and it seems to work fine. I rechecked the cables are good with other devices and routers 'see' other devices.

  Is there a hope for this machine or is blown networking?

  Hello

  Have you tried another Ethernet cable? is the cable may be defective.

  Other than that if happent it even with two different routers there may also be a failure of the printer Ethernet card...

• OfficeJet 6500 has more: do not print officejet 6500 has more

  Hello.

  Status: Cannot print print, web pages in eith B & W or color.  I have updated driver SW, paper, ink, connectivity, computer restarted after SW update, printer reset after SW update.

  Detail: I am able to print the test page of the HP utility without problem with color.  However, when I select an email for example, the printer takes paper and seems to be the impression (movement/noise), but is released without anything printed and no error message on the device or in the printer status window.

  Help, please.

  Hi @d1m25al

  I do not know what causes these white pages, but I'd be happy to help you.

  We will reset the printing system, repair disk permissions, add the printer using the driver and try to start a new search.

  Reset the printing system

  1. Click on the Apple icon ( ), then click on System Preferences.

• A print job in the print queue prevents the other printing printing-officejet 6500 a

  whenever I click on print I get the message print job in the print queue prevents the other printing - print

  then my printer goes offline

  I tried to re add the printer

  I tried to remove and re loading software

  I tried closing down and the fact unplugging pc and printer

  I tried the system restore

  I tried the hp scan print doc - did not help

  I tried to reset the spooler

  I tried deleating all print jobs

  I tried letting windows find my printer - it doesnot find him

  Help

  Hi katt6,

  I read your message which indicates that you receive a message "is a print job in the print queue prevents other printing of print." Please provide the detailed steps that you have already tried. I can help you.

  Try and print a self-test on the printer hardware to see if it is a hardware or software problem.

  Printing a Network Setup Page.

  Run the difficulty it Microsoft tool to see if this will help.

  Diagnose and automatically fix problems printing and printer.

  If the problem persists, continue with the steps below:

  I have provided a document of empty folder of spooling print to see if she will help solve this problem.

  How to clear the current queue in Windows Vista & Windows 7.

  Try to print again.

  Printer is on a network as follows:

  If you still have problems, and that the printer is on the network, check the Configuration Page to see if you have a valid IP address.

  If you have a valid IP address for the printer, then try and access the Web built-in to the printer server.
  Type the IP address in the address bar of your web browser. (Internet Explorer)

  Check the IP address on the computer to verify that it matches the IP address of the printer.
  Go to start, devices and printers, right click on the printer, go to the properties of the printer, some ports tab, click on configure port.
  If they don't match then close the Configure Port window and click on create a port and follow the instructions in the wizard.

• Printer OfficeJet 6500 a. failed to print

  Recognizes the paper in the upper tray but it will not move forward. Says "of paper. Prints ok from the lower plate. Have reinstalled the drivers.

  Kopper,

  This article addresses the problem you are experiencing. Give the steps a shot and let me know the results:
  http://goo.GL/NeUWY

  Good luck!