Problem printing with HP Photosmart 7520

Similar Questions

• Problems scanning with HP Photosmart 7520 and HP Deskjet 2450

  I could have sworn I posted this earlier, but I can't. I have problems with scanning for computer with my 7520 and 2540. The scan of the computer does not work.  On the 7520 when I try to scan a document to your computer in PDF format, it works. When I scan in JPG format, I get errors. "The"Move Finder items"action has encountered an error" and "no connection" appears." I have two printers installed wireless and wired hard. Cable installation the "Scan to Computer" is enabled but does not work. On the wireless (Hello), it says "Scan to computer" is not enabled. Scan the small icon on the bottom of my screen does not have an option of the printer to use. This shows just the 7520. The only way I can scan almost anything with the 2540 is through the Web site. The strange thing is. I have a laptop wireless hung in the living room and I have no problem analysis to the computer with both printers. Just my office's problems. How can I fix?

  A power failure may cause problems. We had a power outage yesterday in my area.

  Helen

  Hi @Helen

  I'm glad to hear that they are working together again.

  It seems that you may have an option "detect the separate components' selected somewhere in the settings.

  Let's take a peek into the HP Scan for this feature, and if find you it clear.

  I just checked a Mac I have access to and I found a setting that would do the same thing that "detect the separate elements", it is called point limits and is located in the culture section. If your article harvest limits element selected, change it to zero.

  The parameter you want may depend on the Mac version you are running. If you can't find the options I identified above, let me know what version of mac you have, I'll do some additional research to find the solution!

  Since we have not fixed the first problem, think about scoring the post that solved the problem like "Accept as Solution" if others in the community can find the solution easily. Thank you.

  I can't wait to hear back on your part.

• Problems printing with HP Photosmart Plus 209 PDF documents has

  Sometimes, when I try to print PDF documents, one or two sheets will print then the printer will just stop.  It turns on and the message window says something like "to avoid damage, use the button 'on' close ' my husband has this same printer and the same thing happens.  I am running Windows 7, Vista, he is a candidate.  Is there a solution?

  Note that this does not occur with each PDF, some.  I was not able to find a common denominator between those who print correctly without any problem and those who are not.

  Thank you!!!

  Get a copy of Foxit a free PDF reader and try to print.

• Problem printing with Xerox printer

  In my new computer with Windows 7 Professional, I installed a Xerox Phaser 7750 DN. drivers of the printer that DVD is installed. I have no problem printing with fran to Word documents, Excel and Photoshop, but when I print from Indesign and PDF only half of the A4 document is printed. How can I solve this problem?

  Try the Global Print Driver (second link) on this page...

• Printing with Macbook Photosmart wireless problem

  I'm not sure if anyone can help, Im a beginner and not very technical so be sweet/patient.

  I bought a HP Photosmart B110, that allows to print wirelessly to a network for my son who just went to College. It has a Macbook and all seemed well with the implementation and test pages printed with all the "Passes" while trying to find the printer on the network no printer showed. I added manually the printer even if the instructions have not really cover how to do this with a variety of menu options such as the LPD, HPJet and intellectual property. I went down the road to intellectual property and were able to get a test page to print, but whenever I try to print a document or scan something I get an error despite initially seeming fine. To do this, what you expect on the first ' print page 1, Page 2, etc. ", but a yellow triangle appears on the printer icon and a message" network host 172.xx.xx.xx is busy will retry in 20 seconds...» 30 dry etc."the Mac can see the printer on the network of the United Utilities to print all come showing the use of ink etc (and as mentioned printed the test page) but I'm really stuck on why I can't get a document to print, can someone point me in the right direction please.

  I do not large companies such as universities allow individuals to add devices to their network, such as printers.  If they allow to connect, it may be that they do not manage the data circulating on the printer.

  In addition, it is a bit dangerous to add a printer to a vast network that anyone can print on it at any time.

  I recommend this printer connected to the computer via USB.

• Photosmart 7520: Printer Wifi connectivity Photosmart 7520

  This printer works well in a small office environment with a Wi - Fi connection.  It has been moved to a home office a piece.  The printer is installed with a wireless connection and works immediately after installation.  An attempt to print after the computer went to sleep or stopped the error message "Cannot communicate with the printer" appears and the impression is not accomplished.  By using the wizard to set up printer on the printer screen, the wireless LAN is located and displayed.  After entering the password, the printer is operational and print all documents in the print queue.  I uninstalled the printer driver, deleted all files associated with HP and reinstalled the latest full driver twice.  No change, the printer works for this session and then connect not when subsequent attempts unless the wireless Installation procedure is complete.

  I have a same printer bought in the same place at the same time and worked in the same office as the above printer OK.  That 7520 does not connect to the wireless network after the appropriate network is displayed and the password is entered.  The print doctor shows a communication problem but has no solution.  All other wireless devices, including computers used in this location connect you and operate without problem.

  It of a problem inherent in the 7520 series or is there another procedure that may correct the problem?

  Hello

  Thank you for using the HP Forums.

  Can you try using a TCP/IP port?

  Creating a TCP IP port

  1. print a Configuration Page to get the printer IPv4 address (you can also tap on the icon wireless on the front panel of your printer to obtain the IP address)
  2. on your PC, go to the Panel control, devices and printers, right-click the printer and on the left, click printer properties, select the Ports tab.
  3. click Add Port, select the Port TCP/IP Standard, then New Port and follow the instructions in the wizard.
  4. Enter the IP address of the printer.

  This video resource will show you how do:

  Create & port use TCP IP

  Note that you can ALWAYS go back to the original port the HP software installed by selecting the HP port on the Ports tab (in the properties of the printer)

  Let us know if it works

• Problems Printing with LR 5.6 HP

  I just upgraded to LR5.6 on your laptop Windows 8.1.

  I have printing problems printing to a HP Photosmart C309G printer. I've already printed successfully to this printer from LR4 running on a Vista laptop.

  The questions that I have are as follows: -.

  1. When I try to change the page orientation in Page layout, it makes no difference to the orientation of the image.
  2. Once I have setup the printer settings in the printer dialogue and send it to the printer to print on paper of format A4; LR said that it renders the image; He finished then the printer pulls the paper through but does not print anything. I tried different settings without success. However, if I change the size of 10 x 15 cm prints OK.

  I'm completely confused as to how to proceed, because I have no printing problem printing from MS Office and Adobe Photoshop Elements products.

  Any help would be accepted with gratitude.

  Thank you

  Peter

  Managed to solve the problem. Somehow the driver for the printer had been installed twice, was originally a kind of conflict. I deleted the duplicate driver and everything now works as expected.

• e print setup for Photosmart 7520 cannot the printer code to generate

  New printer HP Photosmart 7520 - ePrint does not work as I can not web services to activate.  I also cannot the printer to generate the code for the printer to add it on the web

  Hi Teresa77,

  I see you are trying to reproduce the web services page.  The 7520 Photosmart doesn't have the option to print the page of information on the printer itself.

  Try the following steps.

  1 obtain the IP address of your printer

  a. This can be done by pressing the icon on the printer wireless.

  2. Enter the printer's IP address in a browser.

  3. Select the Web Services tab.

  4. on the left side, select print information Page.

  Let me know how it goes.

• Problem printing with HP OFFICEJET PRO8500A PREMIUM

  I have to print certain documents yesterday, disappeared for a few hours and pick up where I left off.  When I went to print my document following that nothing happened.  He entered in the queue of the printer but would not print and I don't have the error messages.  Everything seems normal.  I'm so frustrated that I left it for today and still no luck.  I turned off printer and computer then again hoping that would work.  Disconnected and plugged.  At this point, I don't know what else to do except call this 'thing' in my frustration.  Help!    I have a laptop that printed fine.  What the devil.

  Hi cj727,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  Sorry to hear you are having problems printing from the computer. If I can better help you, please answer with an operating system that you are running.

  Operating system Windows am I running?

  Mac OS X: how to find which Mac OS X Version is on my computer?

  If you are actually using a Windows operating system, you can try to run the HP print and Scan Doctor.

  Please let me know if I can offer assistance more.

  Thanks for your time.

• OfficeJet 4630: Problem printing with Officejet 4630

  I just replaced an OJ4620, who was not black printing, with a new OJ4630.  I am now having a problem with the OJ4630.

  It prints text most very well, but does not always print the Abobe reader messages.  I tried to install a printer driver for the 9800 without great success.  It seems that sometimes it will print the pages of Adobe, but most of the time will not.  I feel guest, and when I click on print, it does not appear that the message arrives at the printer.  The machine will then lock up and I'll have to reboot the system.  The thing that puzzles me is that sometimes the feeling will pass, but it doesn't seem to be a reason that I can understand why it happens.

  I never had this problem with the 4620, but he feels now.

  I have Adobe X and when I check the updates on the site, I thought there is not everything.

  Fran

  Hi @Fran47,

  Welcome to the HP Forums!

  I see that you have a problem with your HP Officejet 4630 of printing when using Adobe Reader on Windows 7. I'm happy to help you!

  A few questions for you:

  • What happens when you make multiple copies? Copy the text or mixed Documents.
  • What happens when you print from other programs, such as Notepad. (The same issue happen?)
  • How is the printer connected? USB or wireless?

  In the meantime, I suggest to try our HP print and Scan Doctorand see if that can solve the problem for you automatically.

  Hope to hear from you soon and thank you for posting!

  "Please click the Thumbs up icon below to thank me for having responded."

• Problems receiving faxes (HP Photosmart 7520)

  I recently bought a HP Photosmart 7520 - eAll-in-one printer. I am able to send faxes but cannot receive them. When I receive a fax, this error message appears "unable to receive. I have connected the printer from the port "1 d" to my outlet for telephone service and have used a splitter to connect to my phone at home as well.

  When you receive a fax, answering the call of the printer or the home phone?

  What can I do to receive faxes properly?

  Hi nishalj,

  If the fax arrives at your Fax before it fails, this reduces the possible causes.

  Try this link.  Perform the steps 1 and 2 and then move to step 6.  The document is written for a former Photosmart model so the steps may be slightly different but you should be able to track the document.

  Special attention to the length of the telephone line cord and dispatchers.

  http://support.HP.com/us-en/document/c01633010

• Problem printing with HP Deskjet 5150

  Hello, I have a problem with my HP Deskjet 5150 color inkjet printer. A few months ago, I noticed that all the documents I want to print are printed with the left margin of the page wider than the right margin; Instead, both margins have the same width. This question concerns the documents in general, and not of documents printed with a specific software only.
  All computers that use the printer have Windows 7 as operating system. I tried to install the drivers of online support for the transition from Windows Vista to Windows 7, but the problem remains.

  What can I do?

  Thank you.

  Hi andrewshort94,

  Thank you very much!

  With this, it is certainly a problem with the hardware of the printer, and because all computers are Windows 7, there is no HP software to try other things.

  You need a Windows XP computer to install this printer to be able to access the HP Toolbox to perform alignment and things of this nature, as it was the last operating system supported the full features software. If you do not have access to a Windows XP computer, I might suggest that you start looking in getting another printer. You can call the HP Technical Support and inquire about trade and commerce program to see what kind of offers they have for you

  Hope this helps, have a nice day!

• Printing with the Photosmart 5514 problem!

  I have a Photosmart 5514 and have just started using it and I probably did something wrong as a beginner and I need help to solve the problem.
  How can I remove printing pending to be executed? I don't know why there is a print job in the queue and when I put in the book, nothing happens.

  Thank you very much

  Jeff

  I'd take a glance on the document below it will show you how to remove jobs from the queue.

  Click here for the document.

  Let me know how it goes.

• Printing with a Photosmart B209a problems

  I have a Photosmart printer that I bought a year ago. It is wireless capable, but at the time I bought it, I didn't have a laptop. Now I do. I tried to install on my wireless several times, but still, it happens at some point and did not finish. Any suggestions?

  I'll be here until 9 am cst tell me when you get this

• Flag 23: problem of scanning hp photosmart 7520: Automatic Document feeding

  My photosmart hp 7520 worked well since I got a couple of months.  I have often used the feature of the parser for a single page (or photo) both placed on the glass.  I also used it to scan several pages in a file PDF - one page at a time placed on the glass (not via the ADF because they are double sided pages).  Two days ago, I started having trouble with the scan function.  When I select Scan--> computer-->-->--> PDF Document MYPC and load a single page on glass, sometimes it allows me to analyze this page, I request to load the next page which I do but that's all.  He said that the analysis has been a success and the document is saved even if I have additional pages.  It doesn't gives me the opportunity to make more than two pages.  At other times, as soon as I put the first page on the glass and go to the scanner, it does "No preview available when you use the ADF" even if there is no paper in the ADF.  I did not any changes for the 7520 or Pavilion.  Is it a software HP 7520 glitch or hardware problem?  I tried the normal stuff of uninstalling the software and put it back, by restarting and unplugging the 7520, etc. all to nothing does not.  Same problems keep occurred.  Suggestions?  Thank you.

  Hi davedunbar,

  Thanks for your efforts in solving problems, and Yes, I'd say gives us a call to see about a replacement printer. We tried all the troubleshooting steps at this stage.

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope you enjoy your Monday