pro pad printing

Similar Questions

• Mac Book Pro is printing 50 copies

  Hello

  My MacBook Pro is printing 50 copies for each print on kyocera 5551ci. Is there a solution for this problem?

  Your post is rather incomplete, we have no idea of how the device is connected, the version of Mac OS X installed, what you have tried troubleshooting, etc... To be more specific, right now all I can suggest is to reset the printing system and then reconnect the printer and then repeat the test.

• Problem with the HP Officejet Pro 8500 printer: clean the print heads each time it is turned on

  Hello everyone,

  the printer HP all-in-one Officejet Pro 8500 (A909a - product n. CB022A) clean the print heads whenever I turn it on. This problem affects any HP Officejet Pro 8500 printer, it is not a problem only of this one I bought. It is a boring bug and annoying because each power clean print heads on involves two bad disadvantages:

  1. waste of ink (each heads cleaning process consumes little ink);
  2. too much time (2-3 minutes) to prepare the printer after plugging.

  I upgraded my printer with the latest firmware available on the HP site (firmware ver. DLM1FN1006BR), but the bug is still present.

  At this point, I ask:

  1. There is a way (or procedure) to disable automatic cleaning this useless to all power on?
  2. Can we communicate with the HP engineers or tell me how to contact directly one of them to indicate the bug and request a new firmware updated?

  Please don't tell me to leave the printer on all the time or that the printheads to each cleaning power is normal behavior! Where then are power and ink savings claimed for this printer model?

  I hope that a solution to this problem. Thanks in advance to everyone will help me!

  Maintenance when the printer is turned on is normal and is required to keep the printheads in good health (not blocked). See here for more information.

  With respect to energy savings, the printer automatically goes to low power mode when the don't feel not for awhile.  It is not necessary turn the unit on to save energy.

• OfficeJet Pro 8610: print legal size document

  Is it possible to print a document on legal size paper on the Officejet Pro 8610 printer?  If so, how can I do or where can I find instructions?  I need to print an excel document and may take up to print, but do not know how to load the paper.  The tray is too small.

  @jaztenor

  Theuser's Guide (Chapter 2, Page 24) explains how to extend the tray for legal size paper.

  NOTE: To load legal-size paper, press the blue latch located bottom left of the status bar of entry and
  Deploy the status bar.

  

  Printing preferences to specify the printer paper that you use.

  Paper size and Media Type:

  Control Panel > display icon > devices and printers > click on your printer >

  Printing preferences > paper/quality tab

  Reference, suggestions and examples:

  Printing options

  

  According to the program / browser you use present it the print job, you can reach the printing preferences in preview before printing.

  Example - Firefox:

  Browser > file > (click) Print > properties (open printing preferences)
  

  Reference, suggestions and examples:

  Manage the print with preview output before printing

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• HP LaserJet Pro P1102 printer: download the software

  Please, I want the driver for my printer "HP LaserJet Pro P1102 printer" because it does not work on my macpro os x10.10 and when I opened the tab pilot Web site recognize my version software and everything's fine, then I click on update, and nothing happens.

  I need the driver to install, or everything that was supposed to let my printer works on this laptop

  Thank you

  Hi @mohamedashraf,

  I see that you have any questions, get the drivers for the printer. I'd love to help you.

  You need to run Apple updates to install the drivers for the printer.

  Here is a document with the steps to set up the printer on Yosemite.

  Update the HP printers - installing a Mac printer driver by using the Apple software.

  You have the Laserjet P1102 or Laserjet P1102w?  How can I find my model number or product number?

  How is the printer connected? (USB / wireless)

  If you appreciate my efforts, please click on the button below the thumbs up.
  
  If there is anything else I can help you, let me know. Thank you.

• OfficeJet Pro 8600: Printer offline and HP Support for Windows 10 don't come upward

  I'm trying to scan pictures to my computer.  Have upgraded to windows 10. My printer is connected wifi.  I bring the printer in Control Panel, set up my printer and it says printer is offline.  Indications are no good they do not appear to be implemented for users windows 10. When I try to go to the hp support for windows 10, I have just a white screen.  I am very frustrated.  I can print to the printer, but he won't let me not scan to the computer, and that's what I need.

  Hi @Procats,

  Welcome to the HP Forums!

  I understand that you cannot scan on Windows 10, with your HP Officejet Pro 8600 printer. I'm happy to discuss this issue scan for you!

  Please, try the following steps:

  Check the connection of the printer on the network and troubleshoot any problems with the printer, router, installation or connection.

• OfficeJet pro 8600 printer-how to make this program work and installation?

  I have problems printing. I wonder how to ste it to the top and do work.

  Moved from feedback

  Original title; printer Officejet pro 8600

  Hi David,

  1. what operating system is installed?

  2. what security software is installed?

  You can go through the printer manual to know how to set up the printer and make it work.

  You can also refer to these items and check if that helps.

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-setup-e-g-Windows-8/How-do-I-install-printer-software-on-HP-OfficeJet-Pro-8600/TD-p/1123283

  http://h30434.www3.HP.com/T5/forums/SearchPage/tab/message?filter=labels%2Clocation&location=Forum-Board%3AInstall&q=OfficeJet+Pro+8600+printer

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• OfficeJet pro 8000: Officejet pro 8000 prints the part of the document

  Have a problem with both networking Officejet pro 8000's. If you print a paginated document 4, printing two pages and stops, then 2 minutes he feeds a white sheet of paper in the printer, the printer hangs then error light on, who need to power cycle to restart. The network is in a school, unused printers for a few weeks, before now, they both work as it should.

  This problem is with a laptop with free Wi - Fi. However, even 4-page document sent to another that officejet pro 8000 prints as it should, and prints as it should when sent to a photocopier.

  The network of small schools there are ten computers wired to office, after trying to print from one of them, the same problem occurs with 2 of 4 pages printing, then a white sheet, then the printer hangs. This desktop computer will also print the same document on the photocopier without problem.

  Not very well where to go with this, help please!

  Problem solved, simply wanted the new cartridges!, but what I do not understand why the part of a document of four pages would be absolutely fine print, all the colors print as they should, then stop and hang. Power cycle printer, exactly the same result. Exactly the same on both 8000 printers?

• HP OFFICE JET PRO 8610: printing problem HP OFFICE JET PRO 8610

  I have a problem with HP officejet Pro 8610 print, it prints very slow and then it stop in the middle and then print again after 3-5 seconds, it is very time consuming. I've known this for 2 weeks and this printer is brand new as 2 weeks of age. I tried to reinstall it 3 x already. I use a wireless connection to the printer, but even if you use a usb cable I still encounter this problem. Please help me with this printer.

  Hey @FICONT,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with your PC of Windows 8.1 slow printing to your Officejet Pro 8610 e-all-in-one printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once this is done, please let me know if you still have problems slow printing.

  Please let me know if that solves your problems. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP Pro B9180: HP Pro B9180 printer range

  With a defective print head problem, but when I raise the printer led to access the head, don't suppose carrage to automatically move to the left? I thought you had to press the button OK to spend, he left? I installed the new print head, but it keeps giving me this error. What a grace to help out with HP and they say that it is a hardware issue, any thoughts.

  Hi @Wig,

  Welcome to the HP Forums!

  I see that you have a printhead problem, with your HP Pro B9180 printer, and I'm happy to help you!

  Here are the steps to replace a print head:

  Replace a print head

• LaserJet Pro 400 M451nw: Laserjet Pro 400 prints documents upside down

  My Laserjet Pro 400 prints documents upside down.  This only happens when you print in black and white, and from certain applications.  Files PDF and Word documents print very well, as plain txt files and files from my accounting software, but files CorelDraw and images in Photoshop CS5 reverse print.

  If I saved a CorelDraw file in PDF format, it will print correctly, but not the native file of COR.

  From Photoshop, it makes no difference what file format I print - jpeg, tif or even a file not saved - all printed reversed if I select black and white.

  Colour printing is fine for all applications.

  Like most of my needs to print b & w, I the printer defined as it as default and just change color when the need arises, but it means I lose lots of toner if I don't remember to print in color in CorelDraw or Photoshop.  Printing an image to grayscale in color also gives the evil eye.

  Any help appreciated.

  Hello

  Try to use a PCL5 driver, which is likely to solve such a.

  First, open the control panel > devices and printers, right click on the printer and select printer properties.

  Open the Ports tab, and take note of the path selected for the printer, and then close this dialog box.

  Download and install the driver HP UPD PCL5, follow the installation by selecting the traditional model.

  Follow the wizard of printwr indicated by selecting the same port as used by the original and complete its installation driver.

  The UPD driver can be downloaded from the following link:

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=4157320&swItemId=ds_99378_6&swEnvOid=4158

  Once you have finished, try to print using the HP Universal printing PCL 5 driver and check for the difference.

  Please let me know if this can help,

  Shlomi

• HP Officejet Pro 8500 prints incorrect color photo

  My new Officejet pro 8500 prints once accuate color. But then, when I print another photo that is Lavender in color.

  I restarted. I reinstalled it. The problem still persists. What else can I try?

  Gibas

  Hello Gibas,

  Welcome to the Forums of HP Support!

  It might be possible that the poor quality of the image when printing with the 8500 is due to print heads. Given that you have uninstalled, restarted, etc it may be preferable to focus on them.

  You can try to clean the print heads, this guide will show you the correct way to clean: "the following printhead appears to be missing or corrupt" or "the following printhead has a problem" Message displays on the all-in-one.

  Let me know if this can help,

• OfficeJet pro 8600 print a single vertical black line when using the charger

  OfficeJet pro 8600 print a single vertical black line when using the charger

  Hi @realestatejeann,

  I see that you have found one black vertical line when using the ADF. With a few steps, we should be able to solve this problem.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Here is a document for the cleaning of the glass Strip and the underside of the scanner cover.

  Vertical stripes, lines or streaks on Copies, faxes or scans.

  If you need help, let me know.

  Good day!
  Thank you.

• Need Vista drivers for HP officejet pro 8550 printer

  whenever I try to load the disc, he returned with it is not compatible.

  * original title - attempts to load a wireless hp officejet pro 8550 printer *.

  Hi Gina6759,

  Please see the following link for the HP site where you can download the latest software/drivers for your printer:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?LC=en&DLC=en&cc=us&lang=en&product=3752462&

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• inside printing with HP Officejet Pro 8000 prints pages out of order

  When you print a 3 page document with my printer HP Officejet Pro A809a print 'two-sided' setting, it prints page 1 to page 3 on the back, then page 2 on a separate sheet. How can I get the printer to print documents duplex in good condition?

  Hello

  You can check the printing preferences and duplex settings, see if you can change the order in this way.

  Set printing preferences and print

  1. In the menu file printing program, click print .