Prob. installation with orig. Intel WiFi5100 @ U450

Similar Questions

• Vista starts is no longer with my Intel core 2 duo processor.

  I am unable to start my Vista Home premium PC using my Intel core 2 duo processor. Initially, my PC came with an Intel P4 - 641, which I've upgraded to a processor E4700 Intel core 2 duo. I had no problem with the upgrade for four years until recently where it would not start.  I get the message to repair windows. I tried to repair and restore the windows are done everything to nothing. I even bought a new hard drive and a different processor - core 2 duo Intel E6600. Only when I re inserted the P4 would normally start from the PC to the top. I tried to install the firmware for vista reliability update: KB936357 to solve problems of stability with Intel core 2 duo processor. But the installer tells me that the update is not applicable, because I am running a P4. Please help as I really want to turn the core 2 duo on my system. I already installed the latest version of the bios available for my system.

  Read the section of files of dump for more information on what these files are made up of: http://support.microsoft.com/kb/315263

• I have a Pavilion 15 t b1000 with a intel 13chipset downgrade to windows 7

  I have a Pavillion b1000 15 t with a intel 13chipset and the need for this downgrade from Windows 8 to 7 is a set of guidelines for this computer to downgrade

  WARNING *.

  HP does not recommend installing Windows 7 on a computer comes with Windows 8, and it will support the installation of Windows 7. HP cannot provide the drivers for Windows 7 and the appropriate drivers are not available for the hardware in the computer. In addition, Windows 7 can not take in charge some of the hardware or software designed for the computer.

  Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

  Your computer does not have Microsoft's Downgrade rights and you must buy a copy of Windows 7 with a valid Microsoft COA and product key.

  The screenshots below is from a laptop HP 15 t-j100... options and the configuration on your computer screens may differ.

  You will need to DISABLE "Secure Boot" and ENABLE "Legacy Support" in the "Configuration of the BIOS start-up secure" on the settings page similar to what is shown below, until you try to install Windows 7.

  

  After you save the changes, the computer will ask you to confirm the changes... Accept the changes by typing the four digit code and press the ENTER"" key.

  

  If you install Windows 7 from a USB and see a message of "load a driver - a required CD/DVD drive device is missing", it's because as 'System Configuration' > 'Config USB3.0 in pre-start' is set to 'Enabled '. This should be set to 'Auto', if this option is available.

  

  In addition, as the factory hard drive is partitioned as TPG, you must start using the internal CD/DVD UEFI or UEFI-Key/key USB to install Windows on a GPT-partitioned disk. Turn on or restart the computer and press "F9" or "ESC", then "F9" when prompted. Select the source of boot UEFI you use and you press "ENTER".

  

  I suggest using Windows 7 SP1 for the best installation experience. If you need Windows SP1, see 'How to install Windows 7 without the disc' to download and create your own disc of Windows 7 SP1. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please download the Windows 7 USB/DVD download tool to create a Windows 7 SP1 USB Flash drive. Please note that some computers may not recognize a valid active UEFI USB Flash drive if it is formatted in NTFS and may require only a FAT32 formatted USB Flash drive. You should be able to make a FAT32 formatted Windows 7 installation USB Flash drive using Rufus, UNetbootin, Universal USB Installeror WiNToBootic. I like Rufus, because it contains options for 'Plan of GPT partition for UEFI computer' and 'FAT32'.

  From the top...

  Download f6flpy-x 64.zip, extract the files/folders and place it on a USB Flash drive.

  (1) turn on the computer and immediately start typing the key "ESC".

  (2) when the MENU is displayed, press "F10".

  3) navigate the BIOS to the "System Configuration", 'USB 3.0 pré-OS Config' and the value 'Auto '.

  4) navigate the BIOS to the "System Configuration", "Startup Options" and "Secure Boot" the value 'Legacy Support' the value "Enabled" and "Disabled"

  5) press "F10" and click "YES" to "Exit Saving Changes".

  (6) computer should restart and display "Change of operating system startup Mode"... type the four digit code, then press "ENTER".

  (7) let Windows 8 boot to the top and put the Windows 7 SP1media in the drive to DVD or a USB port, then logout / stop.

  (8) to turn on the computer and immediately start typing the key "ESC".

  (9) when the MENU is displayed, press the key "F9" and then select the correct boot UEFI source (CD/DVD drive internal, USB drive, CD/DVD, USB Flash drive, etc.). ... Press any key to start the CD/DVD, if prompted.

  (10) select "Language", "time / currency ' and 'Keyboard' settings and then click"Next ".

  11) click on 'install now '... Check "Accept terms" and click "next". Click on "Custom (Advanced)".

  (12) you may need to provide Intel SATA/RAID drivers at the moment...  Insert the USB Flash drive with drivers Intel SATA\RAID previously extracted.

  (13) follow all instructions and meet the need. Enter the Windows 7 key when asked.

  Many 64-bit drivers for Windows 7 from the HP ENVY 15 t-j100 CTO Notebook PC drivers of Quad Edition page should work on your computer (DO NOT use any BIOS or FIRMWARE downloads). Please post (text only) Windows Device Manager "Hardware ID" all missing and/or unknown devices as shown in the example below, and we can direct you to the correct drivers.

  

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Photoshop Elements 10 will work on an iMac with an Intel Dual Core processor?

  Photoshop Elements 10 will work on an iMac with an Intel Dual Core processor?

  Yes. See the data sheet for more details.

  Mac OS

  • Multicore Intel® processor
  • Mac OS X v10.5.8 to v10.7
  • 1 GB of RAM (2 GB for HD video functions)
  • 4 GB of free space (additional space required during installation)
  • display resolution 1024 x 768
  • DVD-ROM drive
  • QuickTime 7 software required for multimedia features
  • Internet connection required for Internet-based services *.

• HP Envy H8-1423: HP Envy H8-1423 with ssd Intel 730

  
  

  Thanks for your reply.

  I tried another port but without success.

  I want to load Windows on it as the main drive for general use. The real HD Seagate is slow...

  One thing I have done is to partition the disk with window and that works, so I can see it with the file Explorer. The next step is to do with the Intel data migration tool, which is not the case at the moment...

  Gilbert

• LaserJet P1102w: Laserjet P1102w cannot activate the installation with Windows Vista 32 bit PC computer wireless

  Hello forum HP, I can use the Laserjet P1102w with USB connection on 3 different devices including a portable Apple and PC Windows Vista and Windows 7 laptop computer, but can not perform a wireless installation with the broadband internet connected wireless PC running Windows Vista 32 bit. The main message is that the computer does not find the printer even when using the USB connection. Any help would be appreciated.

  Hi @Kaiser3107,

  Welcome to the HP Support forum.

  I understand that you have a HP LaserJet Pro P1102w printer that connects three thin devices via the USB port, but you can not perform a wireless installation on a fourth device, equipped of Windows Vista 32-bit, because the PC does not detect the printer via the USB port. I would like to help with that.

  Here is a support document which includes 'USB device is not detected by Windows' which can help the issue of detection - Troubleshooting (Windows Vista) USB connections.

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• Is a Windows XP pro 32-bit is supported by the motherboard ASUS P8Z68 - V LX with an Intel i3-2000?

  Hello

  A friend will be material to an Asus P5B and E6400 Intel to an Asus ASUS P8Z68-V LX with an Intel i3-2000. The trunk will be ok? If using the same system will not work, a new install work fine with the new motherboard / processor?

  Thanks for your replies! : o).

  Hello

  What exactly is the problem that you are facing?

  Looks like ASUS P8Z68 is compatible with Windows XP; However I suggest you to contact the manufacturer of devices for compatibility.

  http://www.ASUS.com/motherboards/Intel_Socket_1155/P8Z68V_LX/#download

  http://www.Intel.com/products/processor/previousgenerationcorei3/index.htm

• Microsoft Flight Simulator 2004 installation with the 4th vista disc does not work. What should I do?

  Microsoft Flight Simulator 2004 installation with the 4th vista disc does not work.  What should I do?

  Hello

  You get no matter what error code or error message?

  There seems to be a problem with the file missing in the rear disc system. I suggest you to refer to the following Microsoft article and check if it helps.

  Flight Simulator 2004: known video issues: http://support.microsoft.com/kb/823628

  If the steps in the Microsoft article mentioned above do not help, then it would be best to ask your question in the Microsoft Game support forum.

  Microsoft Flight Simulator Games Forum: http://www.fsinsider.com/

  Or contact support for Microsoft Flight Simulator game: http://www.microsoft.com/Products/Games/FSInsider/tips/Pages/default.aspx

  Hope the information is useful.

• Blue Snowball microphone installation with adobe first elements

  Blue Snowball microphone installation with adobe elements first problem - acts as the mute

  Hi William,.

  1 - is the mic function in other Audio capture programs?

  You can try to adjust the microphone as default and check if the problem persists.

  a. right click on the volume icon in the tray and then click "recording devices".

  b. make a right click on the empty spot in the window pop up, and select "Show disabled devices" and "show disconnected devices".

  c. right click on Microphone and then click 'enable '.

  d. highlight the microphone, then choose "Set as Default Device".

  e. click apply and then click ok.

  Hope this information is useful.

• I have 2 failure windows 7 installs with 35 GB of hard drive space, but I find no windows.old file?

  I have 2 failure windows 7 installs with 35 GB of hard drive space. but I find no windows.old file?

  The first installation failed because I had a copy of counterfeit Windows 7.

  I bought another copy and installed. Then, I got a horrible virus/worm that disabled all .exe files and the fix was just beyond me!

  I installed again but did not know that the previous facility where still there.

  I tried to clean the disc, but I don't me "from previous versions of windows" to clean.

  I find no windows.old file. (Enabled hidden files)

  Only I have a disc ssd 60gig and want the missing 35gig kindly returned to use.

  Can someone help?

  Check the system restore to see how much disk space it uses:

  Click Start

  Right click on computer

  Click on properties

  Click on advanced system settings

  Click on the System Protection

  Click on configure

  Adjust the amount of disk space allocated to system restore.

  In addition, the amount of RAM you have installed, it will take more disk space for paging, hibernation, and dump files.

• I used by mistake an MSDN installation with a regular windows key disk 7.

  I used by mistake a MSDN disc with a regular key of windows 7.  I then installed a lot of things.  Now, she's back with cannot activate siimilar due to not find a DNS server or something.  Is there a way to solve this problem with a normal installation disc and not lose all the work that went into my computer's configuration?  I now have a regular installation with two legitimate keys disc.

  Thank you

  Craig

  Which edition is on the sticker on the Dell? If the Windows 7 Professional, follow these steps:

  You can also try the following:

  Click Start, right click computer

  Click on properties

  Scroll down to the Windows Activation

  Click on the link change product key

  Enter the product key located on the COA sticker at the bottom of the laptop and click next to activate via the Internet.

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  ??

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

  -----------------------

  Please note that using a KMS license, which requires that never where you install, there must be an Enterprise edition eligible installed Windows 7 (Windows XP Professional, Vista professional/Ultimate Edition or Windows 7 Professional/Ultimate Edition).

• to upgrade the bios on an hp dv4t-1400 with processor intel what file do you use in the sp48847

  I downloaded the HP website sp48847 and extract the files, but I don't know who. FD to use file.

  I have a 1400 dv4t with P7350 intel processor and bios are corrupt. It does not Flash by using the process of disconnecting the power remove the battery hold down power key B pluging and windows by pressing the power button / stop then release the keys B, button / stop and windows. It doesn't detect usb drive with any file flash bios on this subject, and I rename the file in 30F7. BIN.  At this point, I have to remove bios chip and flash with spi Flash bios I have. My only problem is that I don't know who. FD to use file.  I would be grateful if any body can help to know what file to use or a better idea altogether.

  I was told that the file 30F7F66D. FD is for 30F7F66U and AMD processor. FD is for processor intel, but I can't be sure since I have to remove and replace. I also use another computer to download these files and load on the wheel.   Dv4t-1400 does not start.

  Thanks in advance

  Dave

  Thanks again HaggisCat for more information on this problem. After a lot of research

  I found a thread that has answered my question, the 30F7F66D file. FD is for discrete graphics and the 30F7F66U.fd file for

  integrated graphics (UMA).  Just thought I would give you insight in the case where you never came across this problem.

  Thanks again for your response.

• I bought a genuine product Adobe Creative Suite 6 Design Standard about 3 years ago. After the initial installation (with serial number) applications worked well (Photoshop, Illustrator, Acrobat, etc.). However, I could only use Acrobat to a fe

  I bought a genuine product Adobe Creative Suite 6 Design Standard about 3 years ago. After the initial installation (with serial number) applications worked well (Photoshop, Illustrator, Acrobat, etc.). However, I could only use Acrobat a few weeks before the software did not react more. After this time all pdf files can be manually opened with Adobe Reader, but not with Acrobat. Because Acrobat seems to be the default program to open pdf files, nothig happens if I double click on a pdf file, or if a pdf file to be generated from a site Web etc. At the beginning, I was able to reinstall Acrobat from the CD and it would work for a few weeks yet. This has been the case for the past three years. Now, even the resettlement option no longer works and the error message "Is not a real product from Adobe" is displayed during installation. As I said, all the other parts (Illustrator, Photoshop...) work fine and I don't have a product code, serial number etc. What could be the problem and how can I solve this problem? When I uninstall Acrobat, all PDFs open automatically via the Adobe Reader software. But I need more than just to read a PDF file. Help, please!

  Hi Andreas,

  Try the fix mentioned in the KB: https://helpx.adobe.com/creative-suite/kb/acrobat-failed-launch-30-days.html

  Kind regards
  Rave

• Error occurred starting the installation with the error code '132'

  Error occurred starting the installation with the error code '132'

  Hello

  We will be happy to help you, but before that we need additional information:

  Which Adobe product you are trying to install?

  What operating system you are using the version?

  Until then we can see the links below:

  Impossible to install the illustrator of the creative cloud

  132 CC Illustrator installation error

  All adobe products install correctly EXCEPT illustrator... "Error".

• Illustrator does not recognize my GPU NVIDIA 920 M, what driver is up-to-date. Even with my Intel Graphics 5500 which is recognized, I'm not able to turn the GPU performance. What can I do?

  Illustrator does not recognize my GPU NVIDIA 920 M, what driver is up-to-date. Even with my Intel Graphics 5500 which is recognized, I'm not able to turn the GPU performance. What can I do?

  In addition, all the menus to stay for a while and then disappear. I have to be fast to all operations, including by opening a file, apply an effect or export a file.

  Images:

  

  Jonathan,

  I'm afraid that you are locked into the GPU problem, described by butz in post #13 here:

  https://forums.Adobe.com/message/7773402#7773402