Problem after last update

Similar Questions

• my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work

  my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  Once iTunes to work properly, you should be able to fix your device.

  TT2

• AutoFill does not work after last update 3-6-3

  AutoFill does not work after last update 3-6-3

  is after update

  See control if Firefox automatically fills in forms

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).
  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

• my super USB does not work after last update OS EL Capitan

  my super USB does not work after last update os el capitan

  Hi viral_02,

  The resources below provides a few for the SuperDrive USB troubleshooting steps.  Click on the link to see all the possible symptoms and solutions, including resetting the system management controller.

  Get help with the SuperDrive slot on your Mac computer loading

  If the problem persists, Contact Apple or an provider of services authorized Apple, or make an appointment with an Apple Retail Store additional diagnosis, evaluation, or service.

  Take care

• Windows 7 - problems after Windows updates

  When Windows Update 17 new "updates", it due to my new HP computer to not connect to internet.  I talked to HP two hours Monday, 18th and thought we had set.  But the updated Windows Update during the night and the next day he couldn't connect to the internet.  Two hours with HP and finally the gal thought it would be better if I have the option of not accepting updates, or accept only updates Windows or HP.  I did today and do not connect to the internet.  Whenever I have to restore to October 16, which is the last time, he did not work properly.  Help, please!  Thank you...

  Have you tried running the resolution of Internet connection problems after these updates?

  Click Start, type: Troubleshooting

  Press enter on your keyboard

  Do a search for Internet connection

  Double-click the Internet connection problems and follow the wizard to display on.

  Using Windows - Management, configuration, and troubleshooting updates
  http://www.windowslive.com/connect/post/59e9b812-d92c-4dc7-B53C-c1a9ee5bcaf3

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• LaserJet 3050 stopped printing after last update 1st OCT 14

  LaserJet 3050 stopped printing after last update 1st OCT 14.

  Work status displays "Printing" but watch then "Waiting for printer to become available" and prints ever.

  Tried the usual power out voltage/power on both computers & printer.

  iMac with OS 10.9.5

  Thanks for any help.

  Darrell

  P.S. This thread has been moved to printers - LaserJet Macintosh compatible products. Forum Moderator - HP

  Printer started working today.

  I deleted my printers HP3050, removed cable printer, stop computer and printer.

  restarted printer and computer, reinstalled cable and now the printer works normally.

• After opening a PDF file in Acrobat 9 Pro, I get error "Suite Product Activation necessary...". ', this after last update of Windows 10

  After opening a PDF file in Acrobat 9 Pro, I get error "Suite Product Activation necessary...". ', this after last update of Windows 10 - what is a solution?

  Hi patsyf58769691,

  Acrobat 9 is not compatible with Windows 10, but give it a try error "Serial number." incorrect Acrobat 9 | CS4.

  Kind regards
  Nicos

• Z10 Z10 bb after last update blackBerry problem

  The only thing that bothers me after the last updat 10.3.1.1779, is that whenever I have I opened the phone, the screen is big, so I had to hit at full speed to make it smaller in order to get to the place where I want to go. Y at - it a setting that I can change so that the main screen or any screen remains normal size even after that my phone goes into sleep mode?

  Thank you

  Go to the accessibility settings and disable magnifier.

• persistent problems after an update

  Hello

  I hope you can help here

  I have an iMac on El Capitan 10.11.5

  The last update I was last Saturday morning.

  Beware... I'm not very familiar with the technical aspects of Mac (this is why I chose Apple!). And I'm french (bad English).

  I have some questions:

  -impossible to do a restore with the time Capsule (I have all the frames with the story, but a few 'restore' button stays grey

  -my external hard drive (USB) turns off without reason

  -You cannot have a Time Capsule backup since last Saturday (my Time capsule stuff is on my external hard drive)

  Walt, I tried:

  -Restart the Mac

  -throw backup time capsule of 2014 in the trash (ongoing)

  -clean backups Time Machine as 'ongoing'

  -Cannot use the disk repair tool to try to fix my drive time capsule

  I'm sure that you will need more information so don't ask!

  Thanks in advance

  Hello. Have you tried restarting your Mac in Safe Mode?

  -Stop your Mac

  -Wait until your computer turns off and after that press the power button

  -Just after you hear the startup tone, press in and hold the SHIFT key

  -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

  -Once you see office, start a scan Disk Utility to detect and repair file system errors (remember to choose your primary hard drive)

  -Click on the disc to check, then, if requested to solve the problems on the repair disk

  -After that click on verify disk permissions, and then click Repair disk permissions

  -Once the process is complete, stop your Mac and turn it on again after 30 seconds

  I hope this helps!

• UEFI problem after BIOS update

  Hello

  I've recently updated the version of BIOS for the Envy 15 J049TX.

  After the windows update shows "not properly configured SecureBoot.

  Please suggest a solution

  Hi Provost,

  I'm happy to announce that I have overcome the problem of activation of the SecureBoot. I saw an option in BIOS-> setting-> 'HP Factory loading key' Boot. After I loaded the default keys to toggle SecureBoot option has become active and I was able to activate SecureBoot. I applied the last update of the BIOS and has been able to activate SecureBoot successfully after the update.

  I wanted to know if this method is safe and that there can be no other effects on the other parts of the system.

  Thank you very much for the help.

• X 61 speakers does not work after last update Thinkvantage... help please try everything

  Hi all...

  So after a Thinkpad update this morning, my speakers stopped working. Half an hour before the update, speakers worked very well. The X61did is not contact anytihng, wet, hot, or no matter what impact at this time.

  The headphone Sockets worked, even if the internal speakers have not. I tried everything: uninstall Thinkpad was last updated to see if this caused the problem. I tried to reset the audio settings, nothing. I tried updating the BIOS and got the message that my bios is already up-to-date. I tried to get a sound card driver update, but given that the helmet worked I know that it is a speaker problem. Always done, no luck. I looked at every single place for a button mute or anytinhg, and everything shows it worked fine. There is a green check mark next to the speakers in the sound menu, and when I tested them for material, he says they worked very well. It shows that they are connected to the ports. I did a system restore (which did not work until I went in the ThinkPad menu to restart the computer), and then made a quick restart working then. I tried to reset the settings of the system. I tried to go into the system bios to see if the speakers somehow got muted. So far its everything that I can think of, and everything on google I found.

  I bought the computer 3 months ago today. I would send in warranty but would like to try and attach it to the front... I don't think it's a software problem unfortunately. And I have midterms in next week otherwise I would send it. Any ideas? I can do without voiding the warranty?

  great! Have fun with your tablet.

• Apple TV (4th Gen) App store (Singapore) does not work after last update tvOS 10

  I tried a hard reset or empty everything and re-updated my Apple TV.

  However, I am always faced with the same problem to have 'white' pages or does not respond to 'Top Charts', 'Categories', 'Search' and 'purchased apps. The only page I can access will be the page 'recommended '.

  Just tried a restore through iTunes. It always behaves the same. I have also this checked the dealer NuBox apple their game demo is having the same problem as well.

  Can we all here in Singapore with the same generation of gen Apple TV 4 having this same problem after TVOS 10 updated? Would it be a bug in the new TVOS?

  I have exactly the same problem of hv too... apple told me something wrong with Apple TV Apps Store for some regions, including Singapore.   Waiting for hotfix

• HP EliteBook 850 G3: HP EliteBook 850 G3: its problems after the update of Windows 10 anniversary

  Hi people!

  After the update of Windows 10 birthday I have problems with my sound card. There are two sound cards listed by Device Manager. The first is "Conexant Audio of ISST" and the second "Intel High Definition Audio". I know not weather it was the case before the update. I just recognized it after the update when I had sound problems.

  In any case, on a sound start works on the other boot it does not work. It seems that Windows chooses the sound card, every time when it starts. Sometimes it takes the bad sound card.

  I tried to uninstall maps its and their resettlement. On the HP site, there is a driver for the Conexant map bot no driver for Intel High Definition Audio card. 10 Windows itself is not find a driver for this sound card. I also tried to reinstall the other drivers, chipset drivers for example. But unfortunately it did not help. I also tried to disable the Intel High Definition Audio, but also without success.

  What else can I try? I don't want to reinstall Windows. There must be a solution without this. Any ideas? Here's a screenshot of my device manager, perhaps it helps:

  

  If you need more information, please let me know.

  Best regards

  Ty

  I just tried this driver and I still have sound after 6 resets.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_171406_1

• Re: Satellite L500D - boot problem after BIOS update

  I downloaded the new version of BIOS (v1.4) official Toshiba site to update my computer Satellite L500D (PSLK0A - 00U009). But after the update, Windows 7 cannot start, Windows logo appears for a while then it restarts automatically. Windows then goes into repair mode. I followed the instructions on the screen to fix. But it does not work.
  When I reinstalled Windows, the computer worked fine until Windows Update told me to restart the computer. The computer dies again.

  I think that this version of BIOS has a problem. I wonder if there is a way to downgrade the BIOS to the earlier version. I found some instructions on the net to use the Phoenix recovery disk, but I have no file disk and BIOS.
  Please Please HELP, very appreciate.

  TKS

  Try to install the OS to help original Toshiba recovery image. After disabling automatic Microsoft updates to install. When you get the message about controlled initially available updates and install important updates only.

  Check it once more to see if the same thing will happen again. Display the results.

• Problems after Windows Update on Vista wireless

  It seems that other people have a similar problem, but I'll post this new...
  I've been running Windows Vista Ultimate on my Toshiba laptop for years without any problems.  Earlier this year, I started seeing issues after Windows updates.  The main problem is that after updates Windows, my wireless network is is more noticed and the wireless card (which was installed on the computer, and never had problems before) is not recognized.  I manually installed updated drivers with no luck.  The only thing that has worked is to do a system restore to a point before the updates.  The problem seems to be related to an update in general, I can't uninstall.

  I find it extremely ironic that I have no problems with Vista until Windows 7 is launched. First of all, it's the wireless card, then a problem with a driver graphics card (apparently... which seems to be fixed now) and return to the wireless card.  Should I expect to continue to have problems unless I upgrade to Windows 7?  I can't continue to spend half of my day trying to fix my computer after an update that is supposed to fix the errors, but I don't like the feeling that I am forced to upgrade.

  Hi dabaum77,

  From your post, it seems that the issue was occurring when Windows updates are installed automatically again even after the restoration of the system and that is why I suggest to restore the system again to a point before the updates and download and install Windows updates manually.

   

  Access the link below

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Follow these steps to disable the automatic updates:

   

  1. open Windows Update by clicking the Start button. In the search box, type Update, and then in the list of results, click Windows Update.

  2. in the left pane, click on change settings.

  3. under important updates, choose the option you want.

  4. under recommended updates, select the Give me recommended updates the same way I receive important updates check box, and then click OK. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  
  Reference:
  http://Windows.Microsoft.com/en-us/Windows7/turn-automatic-updating-on-or-off

  
  Install the updates one by one and check the update is causing the problem to occur. If the problem persists due to a particular update, repeat the process and refrain from settling the problem causing the update to.

  
  You can also check the update problem in Windows Update history.

   

  Follow the steps to check which day caused the issue:
   
  1. open the control panel (all items view), and click the Windows Update icon.
     
  2. click on the link to view update history.
    
  3. to view the details of a single Windows Update-
  (A) select and right-click on a Windows Update list, and then click details.
  
  (B) click on close when finished.
   
   
  You can also uninstall the update that is causing the problem to occur, although it is not recommended.
   
  1. to uninstall a Windows Update, you must go to programs and features. There are several ways to find it. One of the simplest is to use the search box on the start menu.
   

  

  2. in the programs and features, click the link updates installed.
   

  

   
  3. after a few seconds, Windows Vista will load the list of installed updates. Scroll down the page until you find the update you want to delete, select it with the mouse and then click on uninstall.
   

  

   
  4. Windows Vista will ask you to confirm that you want to uninstall the update you selected. Click Yes and the uninstall process will begin.
   

  

   
  5 depending on the size of the update, the uninstall process may take from several seconds to several minutes.
   

  

  
  6. wait for the window above will disappear and, if necessary, restart your PC. The update is now deleted.
   
  
  Aziz Nadeem - Microsoft Support