Problem at startup of lightroom 4.3

Similar Questions

• Satellite A300-1 b 9 and WXP - cable sound problem at startup

  I desided to "downgrade" from Windows Vista to WXP Pro sindows.
  So, I installed WXP and everything, updated and everything!
  * http://img141.imageshack.us/img141/6448/47371216zy9.jpg

  But I had a wired audio problem at startup:
  "Cannot not be able to control the Volume.
  I downloaded a driver called:
  driver audio Realtek High definition
  I still don't have the same "error" starting :/

  I tried several different audio driver, but I still get the message!
  and what ever I don't... I get this noise... When you boot a computer and then push a lot of buttons...
  a noise comes loke "OOOT" :/
  boring terrifingly.

  Please, anyhelp would be much appreciated.

  Thanks for the comments!

• I'm alert saying 'there is problem at startup msijmm32.dll' every time I restart my computer.

  Dear team,

  I'm alert saying ' there is problem at startup msijmm32.dll' every time I restart my computer.
  Please suggest to solve the same.

  Thank you

  Hello

  1. are you able to start your computer successfully?

  2. what was the recent change in hardware or software performed on the computer before the question?

  If you receive an error for "msijmm32.dll", it's a Trojan infection masquerading as a system file.

  If you receive an error message about 'msimg32.dll' is a correspondent for desktop applications and transparent bits in Windows system file.

  Please follow the links below to hep the problem.

  Method 1

  If you are able to boot to your desktop, please run a virus scan that the file 'msijmm32.dll' is a known infection.

  Please scan the computer for infections by using the links below.

  Reference link:- http://www.microsoft.com/security/pc-security/default.aspx#Safety-products-and-scans

  Microsoft antivirus software: -.

  http://www.Microsoft.com/security/PC-security/malware.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2

  If you are not able to boot to the desktop normally, and then start your computer in safe mode with network and follow method 1

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Note: Only internet wired connection will work in safe mode with network, if there must be procedures for troubleshooting which requires the content of the internet, then please download the content in normal mode and pass t safe mode, in the case of a wired connection, please connect a cable directly.

  Method 3

  If you are facing the error for the dll file msimg32.dll, try re-record it manually in safe mode or in normal mode.

  a. click on start
  b. type term (right click and run as administrator)
  c. type regsvr32 msimg32.dll and press enter

  Also run a scan of system files Checker

  Run a System File Checker tool

  http://support.Microsoft.com/kb/929833

  I hope this helps.

• I have a problem with Adobe Photoshop Lightroom CC. I installed Lightroom CC on my 10 x 64 windows and I don't have this product alone, I have other Adobe products as well but I always Lightroom 6.5.1 instead of Ligtroom CC 2015.1 why?

  Hello, Sir/Madam

  I have a problem with Adobe Photoshop Lightroom CC. I installed Lightroom CC on my 10 x 64 windows and I don't have this product alone, I have other Adobe products as well but I always Lightroom 6.5.1 instead of Lightroom CC 2015.1 why? Can you help me get 2015.1 CC Lightroom?

  Thanks and greetings

  Barber Marie-Ange

  Sir, I just uninstalled the program and installed it again and my version of lightroom just changed to 2015.5.1 but others still facing this problem and I personally think that this is not a good way to solve this problem, nobody don't want to redownload the entire program for this. These open discussions, you can if you want to help them and thank you so much for guiding me.

  Dehaze cursor disappeared

• I have problems with downloading the Lightroom app! What is the location of the appropriate installation?

  I have problems with downloading the Lightroom app! I have already many programs Adobe works on my PC and I have a cloud of Adobe license. But now, with the installation of Lightroom, I get the following error:

  Exit code: 7

  Please see specific errors below for troubleshooting. For example, ERROR: DF014...

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 1 Error (s)

  -Payload: Adobe Lightroom 6.0.0.0 {8048A5DF-8A70-5BE1-954B-E0FDE1BD0D0D}.

  ERROR: DF014: unable to create the symbolic link to ' \\XC-DC-01\Users\Patricia\... \Desktop\Adobe Lightroom.lnk "(Seq 6641).

  When I go to the solution, then it says: rerun the installation. Select a different installation location.

  
  

  But I tried to select all the other folders on my computer for the last two weeks and it still not working? Update other programs is not a problem, then I don't understand what goes wrong? What is the location of the appropriate installation? Why it changed on my computer?

  Can you help me with a solution? Thank you!

  Hello

  Please see Exit Code 7 Installing and errors ' Exit Code: 6 "," Exit Code: 7 "|"» CC, CS6, CS5.5

  Hope that helps!

  Kind regards

  Sheena

• Why Lightroom CC will not download Nikon D610 photos, the same problem, I got with lightroom 3 and told me that I had to upgrade.

  Why Lightroom CC will not download Nikon D610 photos, the same problem, I got with lightroom 3 and said to upgrade?

  Make sure you sort the display you are looking at instead of file name recording time. It is in the context menu with a small sign of a to z just below images. Make sure also that you have no active filters.

• Having problems to download Photoshop/Lightroom to Windows Vista.

  I have a Dell computer; Windows Vista
  I get a message saying that my system does not support this download (or something like that).
  I'm not savvy in computer science. Could someone help me please? I would be grateful!
  From what I can tell, I have 450 GB of space with 300 GB available free of charge. Who help me?
  Thank you!

  [go to Re: having problems to download Photoshop/Lightroom on Windows Vista. to continue the discussion...] MOD]

  your computer operating system is not compatible with the latest versions of the adobe programs.

• My problem is to synchronize Lightroom 4 with 11 elements.

  I have another computer with Lightroom 4 and 10 elements and there is no problem to run from Lightroom to elements. I almost tried everything and spent several hours to find a solution. My two computers are new HP Pavillion and Windows 7. What should I do?

  You can try using the link below & I hope it would be helful to you!

  http://www.Photoshopelementsuser.com/HTML/integrate-Lightroom-with-elements/

  Florian

• Problems during startup and disc.sys blue screen

  I got hard to start that a 32-bit Vista computer does not move in front of the black screen, sometimes there is a blinking underscore, or the mobile mouse pointer. Usually I restart with ctrl-alt-del and it works, it takes sometimes a few tries.

  It also seems to start normally when I go out in the inside installation disc, when he's not here it hangs in checking dmi pool Data given, when he asked me to "press any key" If there is a disc inside.

  This happens only when the CD player is first in the boot order, so I change to hard first push which does not start again.

  If someone has encountered this?

  If I get to the connection, everything works very well afterwards.

  I was going to repair the installation disc, but it's moving before the Microsoft corporation at startup loading bar.

  Then, I got a blue screen PAGE_FAULT_IN_NON_PAGED_AREA with Codes and * disk.sys with address

  I tried CHKDSK and last good known Configuration, but nothing helped.

  In addition, it was after I reinstalled from the cd of installation about five days ago everything worked as well the first two days... the only problems I had were with the installation of updates, after I finally installed successfully, it's when, startup problems began.

  Any experience or advice appreciated!

  JMP

  You have two questions.

  1 - associated WRkrn.sys Webroot for Webroot SecureAnywhere I would remove it

  2-drive hardware problem.

  I remove Webroot and go the HD manufacturer download their utility check HD and run it.

  

• Problem at startup with Vista - hang at crcdisk.sys - green bar still there

  Hello

  I have a big problem and I'm not able to find a problem.

  My laptop (Lifebook, Fujitsu A6200) always hang at startup when the green bar with the windows logo is moving (I restarted after 3 hours).

  When I starts in Mode safe, it hangs on CRCDISK. SYS. I left it run for 2 hours and it restarted somewhere in this period.

  I tried the Drivers and applications of restore disc that came with my laptop and it never found problems. I ran the startup of more than 8 hours repair and the balance sheet was not finished.

  I plugged my hard drive on another PC so I can access my data correctly, it is not a hard drive problem.

  I have not installed any application or any new hardware in the weeks before the problem appeared with the exception of the automatic updates of Windows. I don't think that the problem is a hardware problem.

  If possible, I don't want to reinstall windows.

  Thanks for your help!

  Chris

  Hi Chris,

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Step 2: Use system recovery tools to fix the problem, to access system recovery tools. To do this, follow the steps mentioned in the link below:

  How to access the System Recovery Options menu?

  See also the link below

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-system-repairs-from-the-Windows-recovery-environment-from-Windows-Vista-inside-out

  (a) System Restore: put the computer to an earlier point in time when the computer was working fine.

  (b) order to access Windows Recovery: run the disk check to repair bad sectors on the hard disk.

  At the command prompt, type chkdsk /f and then press ENTER.

  Now, type chkdsk /r , and then press ENTER.

  Note: CHKDSK would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  (c) run the Windows Memory Diagnostic tool

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• BIG problem - the startup information is missing

  Hi, I tried to install windows vista on my computer and I don't have time. Currently, my C drive is fully formatted, I have no OS and cannot start all discs, I get bootmgr is missing error.

  By pressing F2, F11 or F8 does not work because I still got the message "bootmgr is missing".

  Is it possible to get at least the computer so I can try to fix it?

  ·       Do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like:http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not resolve the problem, try the following:

  To run the Bootrec.exe tool, you must start Windows RE. To do this, follow these steps: (you need an Installation of Vista disc to do that)

  1. put the Windows Vista installation disc in the disc drive, and then start the computer.

  2. press a key when you are prompted.

  3. Select a language, a time, a currency, a keyboard or an input method, and then clickNext.

  4. click onrepair your computer.

  5. click on the operating system that you want to repair, and then clickNext.

  6. in theSystem Recovery Options dialog box, click command prompt.

  7 TypeBootrec.exe and press ENTER.

  Note If rebuilding the BCD does not resolve the startup problem, you can export and delete the BCD, and then run this option again. In doing so, you ensure that the BCD is completely rebuilt. To do this, type the following commands at the command prompt Windows RE:

  ·       bcdedit/export C:\BCD_Backup

  ·       c:

  ·       Boot CD

  ·       BCD attrib s h - r

  ·       Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  If you do not have the disk, try EasyBCDhttp://neosmart.net/dl.php?id=1 and see if that helps the problem.

  Good luck and I hope this helps!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Problem at startup error: [.] ShellClassInfo] LocalizedResourceName=@%Systemroot%system32 shell32.dll - 21787

  Original title: problem when starting

  Hello. Whenever I connect to my laptop, a notebook always appear in the office showing a message-

  [. ShellClassInfo]

  Shell32.dll LocalizedResourceName=@%Systemroot%system32-21787

  What does that mean? I'll do my laptop freeze. I can not even access the Task Manager by pressing Ctrl + Alt + Delete.

  I restart the laptop but the message still appears, and then it will freeze again. I can't use my laptop because it's only 3 - months old.

  Someone can help me. Please, I beg you. Surely, I'd appreciate any help. Thank you.

  Hello

  Thanks for posting your query to the Microsoft forum. I will definitely help you with this.

  This problem may occur if the following conditions are met:

  • A Desktop.ini file exists in one or more of the following folders, where drive is the drive on which Windows is installed:
    • drive: \Documents and Settings\All Users\Menu Menu\Programs\Startup
    • drive: \Documents and Settings\All Users\Menu run\programs
    • drive: \Documents and Settings\All Users Menu

  Method 1: Delete the Desktop.ini file

  1. Start Windows Explorer.
  2. On the Tools menu, click Folder Options, and then click the view tab.
  3. In the area of Advanced settings , click on to disable the Hide extensions for known file types check box and the check box that Hide protected operating system files (if they are not already turned off), and then click OK.
  4. Delete all occurrences of the Desktop.ini file that contains the lines described earlier in the "Symptoms" section of this article. To do:
     • Locate each of the following folders, right-click the Desktop.ini file, (if the file exists in that folder), and then click Open:
       • drive: \Documents and Settings\All Users\Menu Menu\Programs\Startup
       • drive: \Documents and Settings\All Users\Menu run\programs
       • drive: \Documents and Settings\All Users Menu

       where drive is the drive on which Windows is installed.

     • Verify that the file contains the following lines:

       [.ShellClassInfo]
       LocalizedResourceName=@%SystemRoot%\system32\shell32.dll,-21787
       

       If the file contains these lines, right-click the file, click Removeand then click Yes when you are prompted to confirm the deletion.

  5. Restart your computer and verify that the problem is resolved.

  Method 2: Use the (Msconfig.exe) System Configuration utility to disable the startup item

  1. Press Windows + R keyboard a type of execution.
  2. In the Open box, type msconfig, and click OK.
  3. Click the Startup tab.
  4. Clear the check box next to any Office entered into the column of the startup item that are referred to as common startup in the location column and can be found in one of the following locations (as indicated in the command column):
     • drive: \Documents and Settings\All Users\Menu Menu\Programs\Startup
     • drive: \Documents and Settings\All Users\Menu run\programs
     • drive: \Documents and Settings\All Users Menu
  5. Click OK to quit the System Configuration utility.
  6. Restart your computer and verify that the problem is resolved.

  Method 3: run Microsoft safety scanner

  I suggest you to run the Microsoft safety scanner.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Let us know if you need more assistance. We will be happy to help you.

  ________________

  Thank you best regards &,.

  Isha Soni

• Problem with colors in Lightroom (color shadows/blacks/artifacts)

  Hi, I imported just some pictures with dark places on them (shadows, night etc.)

  and in the library colors are ok, but once I'm in develop module, change the scenes dark colors and there are even darker splashes (?)

  Its ok when I click on ever but its annoying, but if I uncheck the box, dark colors are back.

  So:

  Library - ok

  Soft proofing - ok

  When I export - ok

  develop - bad spots on the part dark photos

  Photo:

  Objects on dress in develop module:

  

  And that's what it looks like in library, soft proofing and export

  

  Another example:

  http://imgur.com/a/EOtbM The first picture is developing, rest is library and never. You can see black spots on his black shirt plate and TV

  It happens with every photo, regardless of if its from my camera olympus or iPhone.

  IM using macbook air 13, all set to date.

  Thank you!

  Is that what you see? I used an adjustment layer to make it visible.

  

  These artifacts are actually in the file. I noticed metadata in the file that you are using Lightroom 5.6. You need to update it to Lightroom 5.7.1 there was a problem of color management with Lightroom 5.6 under Mac OS X Adobe fixed with 5.7. Which I documented here: Jao photo blog: bug of serious color in Mac OS 10.9 'Francs-shooters' management

  See also here for the official response from Adobe: Lightroom 5: table of ICC profiles clipped shadows under OSX | Community customer Photoshop family

• Creative cloud of 42% problem: cannot install Photoshop & Lightroom

  2 days ago, I bought creative cloud for students and tried to install photoshop, illustrator, indesign, and lightroom on my MacBook Air (13 inch, mid 2013) running OSX El Capitan (ver. 10.11.5). However, I continue to experience the problem of 42%. I click 'install' and 42%, it stops and it is the case:

  

  

  

  When I click on more information, it redirects me to a blank Web page.

  Yesterday, I downloaded creative cloud vacuum cleaner and cleaned all the adobe files. Then, I was able to successfully install illustrator. It works perfectly fine. Then I tried to install lightroom and photoshop... I came across the problem of 42% again.

  I have read the usual discussions and attempted to resolve the issues.

  I followed this: error download, installation or update of Adobe Creative Cloud applications

  1. I checked for app updates-problem persisted

  2. I don't think that it is a network problem since I downloaded illustrator on the same network

  3 firewall-Turned off my firewall, and the problem persisted

  4 upload the logs:

  • DLM.log for download errors - I tried ERROR and always found this: NetDBError error has occurred - 8
  • Creative cloud PDapp journal--sought the ERROR, and that's what I found: OBElib returned the error: 1
  • I also tried to analyze the product setup log main creative cloud ( /Library/Logs/Adobe/Installers)... But when I couldn't find "installers". What is a part of the problem?

  Help, please! I don't know what I can do.

  Try to install Lighroom from direct download link which should put to day then CC Office so successful. I you are able to install LR6.0/CC 2015.0 this download link after the update of 2015.6 LR6.6/CC.

  Install Photoshop Lightroom

• Problem display image in Lightroom

  I am cloud Adobe on my laptop so I have the 5.1 version of Lightroom.  I am running Windows 7 on the laptop and when I try to "develop" an image in Lightroom, the image is completely out of wack.  It seems completely solarized.   It looks good when you view the library as well as the small thumbnail in the upper left when to develop.  It will even change a little when I make adjustments.  It seems as well once I exported it somewhere, but the consultation during the preparation is unnecessary.  I tried to reset all the options display and uninstall then reinstall.   I also tried connecting my cloud Adobe on my Mac personal and had no problems with it.

  

  Any help would be appreciated.

  jrothfuss wrote:

  I am cloud Adobe on my computer laptop so I have the 5.1 version of Lightroom. I am running Windows 7 on the laptop and when I try to "develop" an image in Lightroom, the image is completely out of wack.

  Your screenshot shows LR CC 2015. In the library menu > Performance tab try to untick "CPU usage graphic."