problem copying a3 on the officejet 7500 a

Similar Questions

• Can you see the ink levels Eprint Center for the OfficeJet 7500 a/E910

  You can monitor the eprint Center ink levels for the OfficeJet 7500 a/E910?

  Hello Deborah,

  To answer your question, you are not able to check the ink of ePrint Center levels. The only thing you can do in ePrint Center is to monitor the status of your print jobs you send via ePrint and monitor the connection status of your printer for the recent servers ePrint.

• LaserJet Pro 400 M451dn: Problems copying documents from the printer scanner

  I use a Mark II of Canon Canoscan 9000F scanner to scan documents and copy them into the HP LaserJet Pro 400 451dn color laser printer.  I use the 'Copy' button on the front of the scanner function.  When a color or photo document is scanned this way the red and blue colors are reversed when it comes to the printer off.

  Both the scanner and the printer work perfectly in all other situations.

  Somehow the red and blue colors are to be swapped when a document goes to the scanner to the printer.

  I called the Support Canon technique and they told me that they have never heard of this problem and have never had it reported before.  When you use the "Copy" button function there is no setting that can be done. The scanner copy what he sees.

  So why the red and blue are exchanged on the printer?

  Teknishun

  What happens if you scan the document itself to the computer and then print the scanned copy? If it is ok, then the question must be the scanner software which sends the document to the printer and has nothing to do with the printer. Sorry, but it's a hot issue.

• How can I copy Photos from an Officejet 7500 a card inserted in the printer to the computer?

  I have a HP 7500 a all-in-one Officejet.  I have an SD card with photos on it is inserted into the slot of the printer.  I'm under 64-bit Windows.

  I can only view pictures and print on the printer.  It won't let me transfer photos from the printer to the computer.

  All other HP printers I had always let me use the SD card as a mass storage device and I could transfer files back using file manager in Windows.

  What I am doing wrong?

  Thanks for your help.

  Hello

  Yes, you can do so by mapping the SD card as a network storage device. Please follow the instructions below:

  http://support.HP.com/us-en/document/c00149194

  Kind regards.

• Problems copying files on the external drive via Windows Explorer (Windows 7)

  I have intermittent problems, but that gets worse when you try to copy files/folders on external HD or a Memory Stick via the Explorer W. It happens more often with major issues and seems just to lock up with little or no reproduction has been made.

  Is this a known error I hope be solved via W update?

  Is there an another wau to copy is not using the Explorer W?

  Thank you, in advance, for any advice.

  Run a disk error check on all players used to ensure there is no format/disk etc. on the disc error. It find or correct errors?

  If the check has not helped, then re-create the Explorer copy problem, then some time after, open the event viewer, as shown below.

  When "Event Viewer" is open, click on "top of viewer (local) event progresses in the window and"summer event of the administration"in the central panel, is there 'critical' or 'errors' contained in the last hour?" If so, what are they?

  Open the event - viewer http://Windows.Microsoft.com/en-us/Windows/Open-event-viewer#1TC=Windows-7

  If there is nothing wise of the error listed then as a test, try to start as a "clean boot". The problem then? Don't leave as a minimum, just boot it use for a test and return to the normal start thereafter.

• the command "hp printer assistant" in the software officejet 7500 is not running.

  When I try to run the Officejet 7500 software, the "HP printer Assistant" command does not run when I click or double-click it.  The other 3 commands run normally. This has happened the first or second time I tried to use the software to check ink levels.  I tried ninstalling and reinstall the software without success.

  The system is Pavilion g6-1A30US laptop, Windows 7 Home Premium.

  Hello

  Uninstall the software by clicking Start > programs > HP > HP Officejet 7500 > Uninstall.

  Download and install the latest version of the software below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-109374-2&cc=us&DLC=en&LC=en&OS=4062&product=4083652&sw_lang=

  I think you should see options like scanning and fax options now.

  Shlomi

• OfficeJet 7500 has E910: error scanner E910 Win7 Officejet 7500 has "not detected any computer" & Doc printer/Scanner has no help

  I just moved my printer/copier/scanner/fax, E910 Officejet 7500 has on one side of my office to another.  In the process the power and USB cables have been disconnected.  Same USB cable as before, connected to the same port on the computer.<3 meters="">

  Re-installed software CD.   Downloaded updates.  Several files in the HP folder are displayed with today's date, so clearly that something happened with the update.

  Printer is now recognized and will display the files on the computer.

  Photocopier creates copies.

  ... Scanner not scan.

  When a document is placed in the tray sheet or on the glass, "no computer detected" error message is displayed on the HP device.  [Note: this computer can send commands successfully, if clear communication goes]

  On the computer, when the devices are searched and displayed, the HP device appears with any other printers/Fax.  Scanner is not mentioned here - but when the details are drilled for, said that it's in the category 'printers, scanners '.

  Googling suggested tool print and scan doctor, so I went to that and downloaded.  When you click on it to run it, it says that (paraphrase) some files are missing, wants to download them (value 121 mB). So, I click Yes or then, or whatever, and it brings them.  Notice I just do a full install and updates downloaded, that more can he want?

  Then, nothing happens.  Help HP screens suggest that he must now ask me what function I want help or ink on.  Nothing, no suggestions with little green checkmarks or advice of the error.

  So I went down there is text on what to try.  Some apply - after that the doctor Download 4 or 5 times and do the suggested software download it 4 or 5 times, somehow unnecessary.  Disconnect and reconnect the USB cord - done that, at least the print function does not disappear, but the scan did not return.  Restarted the computer and printer HP - has done that, no difference.

  This is not the first time that the scanner was not updated on the computer at the other end of the cable.  In the past and it has been a while, memory, is this activation of the analysis of the computer set the scan to life function, but I do not see this option.  The computer "HP Scan" displays an error message that the HP Officejet 7500 E910 was not found, as does the Windows Fax & Scan.

  Why, if the printer can be found, and it is in the same unit as the Scanner, the scanner will not appear?

  Telephone support HP identified the problem: no drivers.  Took about 15 minutes for a useful person straightening things.

  Note that I had uninstalled the printer and its software before re - load the software.

  As part of this process, I had identified with HP via different input strings the OS of the computer and the details of the all-in-one device model number.  So why couldn't HP identify the drivers concerned and ask them to download also?

  Anyway, for now, what I need is working.

  Detective Conan

• OfficeJet 7500 has 910: officejet 7500 a E910a

  I use Mac OSX 10.10.5 - they have more a driver that will support the officejet 7500 has 910.  Y at - it a fix for this.

  Hi @adiedrichsen,

  Welcome to the HP Forums!

  I see that you are looking for a driver for your printer HP Officejet 7500 a E910a on Mac OS X 10.10, and I'm happy to take a look for you!

  There is no full feature software and drivers available directly from HP on this printer and operating system.

  However, there is a driver by Apple which gives basic printing and scanning capabilities, you can download this driver by accessing this Web site, HP v3.1 for OS X printer drivers.

  Scanning without HP software, please see this post, Re: iMac OS X 10.9.3 Scan for iMac driver for HP OfficeJet Pro 8500 a A910a does not appear to be, by my colleague @Sunshyn2005. That applies to your printer and your operating system, as well.

  Hope that answers your question and have a nice day!

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

• OfficeJet 7500 E910 model: 0x61011bed error code

  0x6011bed error code is displayed once the printer performs an impression and to enable again the printer requires a lot of button pushes on the display of messages of 'OK '.

  I have turned off the Officejet 7500, disconnected from the power, waited a minute, deleted and reinstalled ink tanks and the print head, sucked and bluff visible dust but still cannot make the mistake go away for very long, with usually error code return after printing (print or receipt of a fax).

  I perform the extra step or need of cleanup for more than just a job printing after the error code clears?

  An additional observation: If the print job is multiple pages, once started the Officejet 7500 completes the task, but is to begin after the error code displayed is the problem.

  Hey @pauledinger,

  Thanks for getting back to me on this subject.

  Because you also get a paper jam error, you can click here to access the paper jam good troubleshooting steps. Once the support document opens just review the Solutions proposed to ensure that no paper or debris is hidden in paper path in your product. Support document also guides you through the rollers for the cleaning of the printer. Regarding a paper sensor, you can not clean the sensor itself. In addition, if the sensor is defective, it is a non-replaceable part on this model of consumption of the product. Therefore, a replacement of the entire unit would be necessary.

  After the jam troubleshooting steps, please try printing. If the error persists, can please click you here to send last programming Firmware update to your printer. The Firmware is the "brain" of your printer and control that made your printer and how your printer it. If there is a corruption in the internal programming in your printer, it can cause performance problems. Your printer must be in a State of 'ready' to 'send' to update the Firmware of the product. If your printer indicates a status of error on the Panel until the firmware update will most likely fail. Once the firmware update completed test print to see if the problem has been resolved.

  If the error state persists after checking for jams and completing the update of the Firmware a replacement of the entire unit would be the next step.

  Please let me know if the troubleshooting steps I've provided resolve this error state. Good luck!

• Printing an envelope A2 in Officejet 7500 E910

  I tried several times, in vain, to print an A2 envelope on this printer.  It will show perhaps, but I have dark lines or it will jam, which is most likely to occur.  By checking the archives, I see other printers do not support this size envelope, but there is no mention on my particular model.

  The same applies to this model or am I missing something?  If this printer is able to print an envelope of this size, is there a work-around perhaps?

  Thank you very much for any assistance, you may be able to offer.

  KJ

  Hello @KatyJean,

  Welcome to the HP Forums!

  I understand that you get problems printing A2 envelopes using the Officejet 7500 E910. I will do my best to help you! First of all, I need to know your operating system on your computer? Windows or Mac?

  Just to let you know, I'll provide the Product Specifications. Click on the supported paper handling, and then click Envelopes supported. You may have noticed the A2 if not supported.

  If you have a Mac computer, you can create a custom within this guideline size: (3.0 to 13.0 inches) wide and (5.0 to 44.0 inches) long. I'll give you a document from HP on create paper formats in Windows 7, Windows 8, and Mac OS X.

  If you have any other questions, please let me know. Have a great day!

• OfficeJet 7500 a printers are unable to print on envelopes of standard size European

  To try to resolve the problem of HP sells printers Officejet 7500 has in Europe when they are unable to print on envelopes of European standard sizes, (they only sizes us and we cannot but american size wrapped in Europe. - in Europe, we use the European sizes) and seams that no one at HP gives a dam. They just continue to sell them knowing that they do not work. They will be a reminder of the same put an end to sell them in Europe until they fix this software.

  Hi Kyle, I am on OSX 10.8.4 and tried to pring DL and C5 envelopes, he has not had these listed in the options, I went for the custom size option and the DL, I put in 220 X 110 mm and the printer has always rejected the size of the paper (envelope). HP argues that only American sizes are available to print on this model and I should have air in the specification before buying. However, I belieave that if they sell 1, thousands of these printers in Europe then I probally won't be the only one wanting to print the address on a standard envelope. HP argues that they have not to add the software to print envelopes Europeans to the driver as they do with all their other printers because with what is a printer large format people would use it for plans etc. and not for the envelopes. It is stupid, even if you don't have it used to print a plan, then you need to always print letters and mail these letters into envelopes, reason for which only have American sizes of envelopes on printers that are sold on the European market. They say that nothing can be done and we need to get the printer to the provider. I say that someone at HP should add the European dimension of the software for the driver that the printer is capable, it is a great printer, just the driver software, he drops.

  Thank you

  Roy

• OfficeJet 7500 a take too long to start to print.

  Hello

  I recently purchased the Officejet 7500 has, for its ability to large format. Very often, after clicking 'Print' in my app Apple Pages, a very long time (several minutes) will pass like the computer "looks" for the printer. Also, as often, once she found the printer it will take a lot of time to 'connect' to the printer. Last night at 23:00, I clicked on print. This morning at 07:00 it was always "sends data to the printer." The document is a simple pagle.

  When I try to use the HP utility he also takes a lot of time to 'communicate' with the printer and just hanging there.

  This problem is not always the case. Sometimes I can print several pages without interruption, but all too often, there is a long long long time. This NEVER occurred with my previous Epson printer.

  The printer is directly connected to my Mac via the USB cable.

  Someone has an idea what could be the problem and how can I fix?

  Thank you

  Brian

  Thanks, I found this article, and it seemed to do the trick.

• Surface 2 compatible with Officejet 7500 RT

  The Officejet 7500 of large Format e910 printer is compatible with the Surface 2 RT win 8.1?

  Try to follow the instructions for RT in the document in my previous post to get the printer installed in Windows first.  The printer should be available in other applications where printing is possible. Make sure the printer is set as the default printer as well.
  Let me know if it works outside of the HP AIO App.

• Impossible to copy files to the Sansa Fuze using Windows 7 (drag and drop, or Windows Media Player)

  Hello

  Yesterday, I bought the Sansa Fuze and I have problems copying files to the device using either Windows Media Player (Sync) or Drag and Drop (Explorer).

  The symptoms are:

  (1) the device is recognized and available in Windows 7 (Series USB MSC - sorry don't have it with me right now)

  (2) took me to upgrade to the latest firmware, which has worked flawlessly

  (3) when I try to drag and drop a file on the device (I use Windows 7, 64-bit), it starts, but doesn't seem to calculate the size of the files or waiting time to download correctly.  It is followed by a slow progressive, until the computer crashes, resulting in a constant 100% of the CPU.  The only solution is a hard reboot

  (4) when you use Windows WM, the device is recognized, okay and the synchronization starts, but it then stops without reason.  Once again, the processor springs and requires a reboot

  (5) using the results 3 and 4 in 1-5 files being copied across, but not more.

  (6) I tried several albums and one album at a time, but cannot determine if that makes a difference.

  Help, please!

  See you soon,.

  Richard

  It may be a bug in Windows 7. But one thing to try is to go to the Device Manager (assuming that Windows 7 still has), uninstall the "rocket" (under USB controllers), and then run add hardware to find and reinstall the driver.

  Use the MTP with Windows Media Player mode, MSC mode without.

• Apple Max Pro: officejet 7500 not detected Mac pro

  I have a mac Pro running the new OS 10.10.1. I have been on the web for HP and connected through USB and the updated software.

  I use the wireless printer. When connected to any functional USB are available on the MAC.

  The Mac Pro sometimes will detect the fax part (where the power is off), but not the functions of printer and scanner.

  I checked the Officejet 7500 firmware and it is up to date.

  The printer is detected and works well under windows.

  Please can you help me

  Concerning

  Norman

  Hello

  I think I have it solved. I put a static IP address outside the DHCP range and the Mac pro picked up instantly.

  Thank you for your help

  Concerning

  Norman