Problem in Configuration of Hyperion FDM load balance...

Similar Questions

• Configuration of AppsTier (CFP, load balancing) of nodes R12 Multi with RAC 2 nodes

  Dear all,
  
  I installed and configured applications R12 with Oracle RAC 2 nodes. (APP1, DB1 and DB2).
  
  Now, I need to add a layer of application (APP2) to configure high availability, balancing load and PCP.
  
  So, I cloned (adcfgclone.pl appsTier) application for APP2 layer (not shared, the two file systems are different). When I run the application it doesn't knot APP2 App1, more more simultaneous manager works only on a node (can be due to APPLCSF does not point to the mounting NFS share folder), although I've defined managers primary school-children also.
  
  If I run the autoconfiguration of APP1 application service will only work on APP1 and even if I do for APP2, then application works with APP2. I need to have configuration CFP, balancing the load (via DNS if possible) and the high availabllity for the Application tier.
  
  When I start the application, it will start OPMN and APPS Listener on the nodes, but simultaneous manager does not start on both, to a single node.
  
  Is this requires having both APPS name of the node is the same?
  
  Thank you very much
  
  Ravi Purbia
  
  Published by: Purbia delighted on June 9, 2009 18:04
  
  Published by: Purbia delighted on June 9, 2009 18:05
  
  Published by: Purbia delighted on June 9, 2009 18:07

  Ravi,

  If I run the autoconfiguration of APP1 application service will only work on APP1 and even if I do for APP2, then application works with APP2.

  Most likely, it's something with the profile option values, then run utility adchkcfg to get an html report that lists all files and profile options that change when you run AutoConfig on each node.

  I need to have configuration CFP, balancing the load (via DNS if possible) and the high availabllity for the Application tier.

  For load balancing, you must perform the steps according to the guidelines of this document.

  Note: 380489.1 - using Load-balance with Oracle E-Business Suite Release 12
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=380489.1

  For the installation of the CFP, please see:

  Note: 388577.1 - using Load-balance with Oracle E-Business Suite Release 12
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=388577.1

  When I start the application, it will start OPMN and APPS Listener on the nodes, but simultaneous manager does not start on both, to a single node.

  Any errors in the log file of CM?

  Is this requires having both APPS name of the node is the same?

  It is not necessary.

  Kind regards
  Hussein

• Hyperion 11.1.2.1 load balancing

  Hi all

  We intend to set up load with 11.1.2.1 balancing version.

  Server1 - Foundation, planning, Reporting

  Server2 - Foundation, planning, Reporting

  Server3 - HFM and FDM

  Server4 - HFM and FDM

  Server5 - database, Essbase (linux)

  Previously, we planning but load balancing has ever done foundation, hfm and fdm load balancing. So, need some suggestions before you start this process.

  For planning, we have installed planning (Server1 and Server2). In weblogic, we got 2 managed servers Planning0 and planning of the depenses1.

  By default the Round robin method, taken in load balancing.

  But the case of Foundation also, can we follow same process?

  can we use weblogic even serever1 only for all servers or can we install 2 servers weblogic 2 servers (server1, server2), where we plan to install Foundation?

  Thank you

  Mady

  You follow the same process you did for planning, weblogic will be installed by default on all servers, you can use the same domain server and weblogic administrator.

  Run the server configuration web foundation once completed.

  See you soon

  John

• VPN3000 Load Balancing - synchronization of the Configuration

  I have found information on the configuration of hubs for load-balancing and realized that. I can't find any information on how the Member devices keep their configurations in sync. Is it automatic or is it necessary to update all members manually when changes are made?

  Dennis,

  Automatic synchronization of the configuration on the hubs is not possible. You must manually synchronize the configs.

  See you soon

  Gilbert

  Rate this post if it helps

• vCO 5.5 high availability / load balancer configuration

  I do a planning for a new deployment of vCO 5.5 and I would like to take advantage of the new features for high availability, but documentation seems to be a little lacking in Department of load balancer. I hope someone knows the answers to the following questions using zero in on possible configurations for load balancing options:

  Calls to instances of vCO they state or can I use a setting of type stateless round robin for the configuration of lb or what do I need to support sessions?

  Is there a health control end point which I can query the load balancer to automatically remove service instances in a configuration active / active failure? If there isn't a specific is a good audit can be done to create a service to act as a health check?

  Did he already works with a configuration similar and willing to share their experiences?

  Hello

  You can read the following article which explains how to configure Nginx as the load balancer. I hope it's useful.

  VMware KB: Nginx Configuration load lalancing software VMware vCenter Orchestrator 5.5

  Kind regards

  Radostin

• Console Proxy doesn't work is not behind the edge load balancer

  I have a strange problem. I set up a load balancer with vShield Edge. Behind the load balancer, I have two cells vCloud. The Web interface works very well for users, but trying to connect a VMRC to view remote screen it displays 'connection' and then the session is disconnected.

  Then I stop the first cell and users can establish a VMRC connection again. When I activate the first cell once again, the web interface continues to work, but not the proxy of the console. Then I stop the second cell and now elements of the console working again.

  Any tips?

  Gabrié

  Have a similar setup and had the same problem.  Two things to check.  Go to c:\users\\appdata\local\temp\vmware- and open the last file vmware-vmrc - xxxx.log.  Towards the end, it should tell you why it's a failure.  For me, it was a conflict of thumbprint SSL, dating back to the different SSL certificates on the cells.  Also, be sure to vCloud Director Administration-Public address you have the right audiences VCD console address specified. To resolve the inconsistency of my mark, I just created a file certificates.ks a cell and then copied on the other cell and reran the script configures.  Good luck with VMware to help.  I opened a folder for this issue 6 days ago and have yet to get any help!

  -Craig

• NIC teaming + with leaves HP VirtualConnect and Cisco load balancing

  Hello

  I configure ESX infrastructure running on the blades HP (c7000 enclosure), VirtualConnect and Cisco 3750 switches for the uplink. My network configuration is based on the HP VirtualConnnect Cookbook, scenario 11.

  On the ESX Server, I configured a vSwitch with two NICs grouped. Each card can see a different network of VirtualConnect. Each VC network has active SmartLink.

  Each network of VirtualConnect is associated with two ports on a Bay of VC. These two ports are the uplinks in Cisco 3750 switches. Cisco switches are configured in a pile, and each port associated with the VC network is configured with LACP.

  Here are the facts:

  -Each network (Host A and host B) is properly configured for the LACP Protocol, in other words, the links are shown as active/active in the VC Manager.

  -Communication of ESX is good.

  -Failover and failback function OK.

  The problem: I can't get the load balancer to work. All virtual machines use a single bear. I tried different algorithms on the server ESX (source port ID, mac, IP hash hash) and the configuration of the equivalent from Cisco.

  I have attached a diagram of the physical network, but also the setting to ports.

  What Miss me? Thank you very much

  Pablo

  Because you want to create technically not a channel in an ESX perspective, you do want to use the hash of the IP.  If ESX attempts to send traffic through the two network cards, the cisco switch should drop this package as part of its loop avoidance algorithms.  You should be able to check that out in the switch port statistics.  You should not use the switch port ID.

  Not sure about the promiscuous mode.  Who do not have any account, as far as load balancing is concerned, unless the portgroup was not properly inherit the vSwitch properties?

  -KjB

  VMware vExpert

• RAC load balancing question

  We have added a third node of a cluster with two nodes on 11/7. Before the addition, expenses (via the OS uptime command or above) on the two first nodes were included between 20 and 40. The first node was the more active of the two, rarely fall below 30, but on both charges were very high. These first two nodes have two dual core CPU with 16 GB of RAM, who have six cases of db on each. The third node has two quad core CPU and 16 GB of RAM. We added only the busiest db on the third node, so there is only a single instance. We have added the third node to all remote to connect DB files tnsnames, with LOAD_BALANCE = yes. For the first week, Sunday 11/7 to Sunday 11/14, most incoming connections were still nodes 1 and 2. Connections have been made to node 3, but not as much as we would like. However, since this last Sunday 11/14, the majority of the connections are nodes 2 and 3. Rarely a connection will node 1. We can connect directly on node 1 with no problems. Nothing has changed over the weekend and nothing has been restarted. Is something that takes a while to 'calibrate' load balancing? Is there something that we can check or change to give a more balanced load? We are new on the PAP, so we are puzzled as to why it happened this way. Any guidance or advice is greatly appreciated.

  You must configure at the level load balancing server-side.

  (1) register all instances in any listener by setting local_listener and remote_listener of init parameters
  (2) CLB_GOAL set of each service, to set the expected duration of connections ("SHORT" for the pools of connections or "LONG" for forms)
  (3) set the GOAL of each services, updated the workload expected (FLOW for batch) or TIME of SERVICE for web sessions

• TMS 14.5 and redundancy with F5 load balancing

  Hello

  I'm looking in the installation guide for TMS 14.5 to design redundancy TMS with the F5 for one of my clients. I wonder if there is any requirement of specific network for the TMS1, TMS2 and F5 must be in the same VLAN or not. My client have a TMS with TMSPE and deploy the TMS Server 2nd in different data center and will use existing F5 load balancing. They cannot have the same VLAN as a current TMS server in the new data where 2nd MSDS server will be Center. Existing F5 load balancing is also, in the VLAN different already.

  y at - there no specific review we need to take care of the redundancy?

  Thank you

  Chris

  As the TMS 14.4, TMS no longer an active/active load-balanced mode and now works as active/passive.

  You can find the details in the "Configure a redundant deployment" section of the Installation of TMS and Upgrade Guide (latest version 14.6 related).

  As long as both devices are accessible (and your F5 can route traffic to each of them according to the needs), it does not matter what VLAN, subnet or a location that each MSDS server resides on.  Information of VLAN in the guide are just one example of how it can be configured in a simple load balancing scenario.

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• Someone at - he set up the Insight Log load balancing?

  Hello

  We try to log configuration Insight in a load-balanced, and cluster configuration. After the search tirelessly for blogs, the question on this forum, or other persons who completed it and shared their installation that I found nothing. The only thing that comes close is http://sflanders.net/2014/05/01/log-insight-2-0-beta-load-balancing/ , but indicates only how it will come in a future post!

  I was going to Setup Proxy HA, but from my understanding it will not charge the way UDP traffic that newspapers Insight will want to have it transmitted information. Because we want to send more, otherwise all traffic to syslog to log Insight area, we would need to use UDP 514.

  Those who have actually set up load balancing, you followed a guide? If not, could you share how you accomplished, setting up your environment to balance between several workers?

  Any help is appreciated!

  -Patrick

  Hey Patrick,

  I just posted a more practical guide this morning: http://sflanders.net/2014/06/24/log-insight-external-load-balancer-configurations/

  You can use HAproxy, but if you need UDP, then you're right in that it will not be to your needs. If you are looking for a free/free alternative, take a look at: downloads | Load balancer Zen

  If you have any other questions, please let me know!

• Load Balancing configuration failed with the failure of the connection shared after 11.1.2.2 11.1.2.3 upgrade

  Hello

  We have our EMP system had put 11.1.2.2 to 11.1.2.3 and it's a broadcast environment (Windows 2008 Server) and in one of the server, we installed FDM and after 11.1.2.2 upgrade to 11.1.2.3.

  When we load balance FDM Configuration, SSP is failed with " Shared Services Connection Failed '

  What I did:

  Deleted all entries in the object load balancing DCOM {E652643D...} and the Application Server Config {26AD6592..} and the COMJNIBridge DCOM objects. Re-directed EMP config for FDM application server

  and reconfigured the FDM with mycmsc\svc_hyperionfdm of the user application server. Config of load balancing is still unable to the connection of Shared Services with the error "Shared Services cannot connect".

  I tried the local administrator user but fails in the same way

  Windows system log entries:

  The application-specific permission settings do not grant Local Activation permission for the COM with CLSID {E652643D-6CC1-48AC-915D-01842B04F292} server application and the APPID

  {E652643D-6CC1-48AC-915D-01842B04F292} the user NT AUTHORITY\SYSTEM SID (S-1-5-1 of the address LocalHost (using LRPC).

  This security permission can be modified using the Component Services administrative tool.

  Windows Application log entries:

  Recovery of the class factory COM for component with CLSID {E652643D-6CC1-48AC-915D-01842B04F292} failed due to the following error: 80070005.

  COMJNIBridegWrapper.log entries

  08/07/2014 10:42:06: unknown COMException error

  at Microsoft.VisualBasic.CompilerServices.LateBinding.InternalLateCall (Object o, Type objType, String name, Object [] args, paramnames, CopyBack [] Boolean String, Boolean IgnoreReturn) at

  Microsoft.VisualBasic.CompilerServices.NewLateBinding.LateCall (Object Instance, Type, Type, String MemberName, Object [] Arguments, String [] ArgumentNames, TypeArguments, Boolean] [] Type

  CopyBack, Boolean IgnoreReturn) at Hyperion.Fdm.Api.Common.Security.Authentication.AuthenticateUser (String userName, String password, the domain, String String & ssoToken)

  Hello

  Finally, we could solve this problem. Thank you for all your help.

  Kind regards

  VJ

• The implementation of hyperion IR application load balancing while 2 servers point to a DB?

  There is a DB production. Some time need to configure the load balancer for Hyperion interactive report achieve high availability.

  As know there are a lot of method to implement load balancing, want to know if

  given two machines virtual (each of them has its own application server), and two of them going to point to the same DB via shared Assembly called/U01 player.

  After the official documentations of oracle documented, there are scarce resources can refer to, any who knew this case of configuration before?

  Hello

  We have implemented this type of solution:

  (1) server 1: install and configure in usual way. Better to use different patterns for each product.

  When you configure Reporting and analysis framework services give repository location as shared drive location.

  (2) server 2: Installation of any product that has been installed in the server 1. While configure the database for the shared services registry point to detail diagram 1 server, it automatically configure the database for all the other remaining products.

  When you configure Reporting and analysis framework services give location of the repository as a shared drive which gave in Server 1.

  Make sure that the Shared disk is accessible from both servers.

  You can deploy applications weblogic Server from Server 2 by giving details of server 1. ensure that the weblogic Server 1 service must always be upward and running for Server 2 workspace to work.

  So if we set up the web server in both servers, then you must have load balancer and configure logical web address to this server for load balancing.

  If you configure only in one of the server, then this workspace server that url will act as load swing url.the problem with this is always THAT OSH must be running or workspace url will not work

  hope you understood.

• RV042 load balancing problem

  We have two network connections coming into the office. One is a private Wan, and the other is a WAN on the internet. We have a RV042 router configured for load balancing. We have our private WAN which includes Exchange and 6 VPN Wan1. On WAN2, we have a public IP address and home workers. Both connections are 5 Mg T1s and both have the ability to access the internet but only wan2 has a public IP (76.x.x.x) were as WAN1 has a private IP address. (10.x.x.x).

  Were now the problem lies is our new website based on payroll, system does not support load balancing. We have on one hand stop when we do pay (Tower load balancing off.)

  Now is it possible to use our computers to pay only one side? change the host file maybe? Or force a certain MAC address of use only the WAN1 or is there a better router to achieve?

  Any help would be appreciated

  Peter Labelle

  I don't have a RV042 and have had reference to the Administrator's guide:

  http://www.Cisco.com/en/us/docs/routers/CSBR/RV042/Admin/Guide/RV042_V10_UG_C-Web.PDF

  I hope these comments are useful. Perhaps you can comment and let me know if it works for you. Check balancing load and the binding protocol section.  These changes are disruptive... Please assume a failure during the change.  Not a long interruption, but the sessions at the same distance could be lowered.

  Out, you can use the protocol binding. This could cause some problems with the VPN client... you can try this after hours?

  For entrants, how customers and remote computers know the accounting software?  You are advertising this IP address via a link or another?

  If you are, then you can have a preference through one of the links.  If you advertise this IP address then you will not be able to provide a preference to a supplier of services on the other.

  Do please see the Administrator's guide and let me know your thoughts.  Sincere greetings and HTH,

  Andrew Lissitz

• Hyperion Planning11.1.2.3. Server load balancing

  We will install and configure Hyperion planning in the cluster environment. After you have configured the servers planning successfully how to implement load balancing. Do we need to use hardware or software load balancing. I have no idea on balancers load. We must use to configure logical address that points to the load balancer server but do not know how the load balancing server must be? Please notify.

  Install all along planning to Server1 products and configure them.

  Go to Server2, install only the planning and deploy using the same database.

  WebLogic will create 2 (Plannin0, planning of the depenses1) servers in single Cluster (using the Round robin algorithm).

  Thus, at the time of access automatically weblogic will redirect requests internally.

  Thank you

  Mady

• Hyperion 11.1.2.3 Linux load balancing installation - how to test?

  Hi all

  I installed the version Hyperion 11.1.2.3 on 2 Server (6) of Linux. We installed the Foundation Hyperion Planning and Essbase on Server1. Hyperion Planning on Server2 (Load balance).

  Installation and configuration performed and workspace, planning of work in both servers. In the Weblogic planning Cluster is created by EMP Configurator only and deployed Planning0, planning of the depenses1 servers.

  Now how to test the load balancing happens or not?

  Thank you

  Mady

  As demand would go through web server (OHS), first thing to try would be to stop planning0 and check if you are able to do things, then vice - versa. By default, I think that the load balancing would be responsive, so as the first request goes to planning0 then the depenses1 planning and planning0.

  Thank you

  Vivek