Problem in making recovery disc

Similar Questions

• Satellite L350-17Z: Question recovery disc creation - problem with calibration

  I'm eager to get win xp instead of vista current on Satellite L350-17Z because some soft is not stable and vulnerabilities, while under xp on the desktop computer, I had no problem. XP compatibility mode is not solve this problem.

  So I decided to do it in a cruel manner as a laptop is new and almost empty, not to mention the habit of hard drive xp. Still I tried to make a recovery, using TOSHIBA Recovery Disc Creator.

  Buta * during DVD burning there is a fault and message about some problems with the calibration. I tried a few discs - same result.

  Hi Snen,

  It would be interesting to know what CD/DVD drive you have. Maybe you should try to update the firmware of the drive. For some readers of Toshiba and Pioneer, the site shows an update of the firmware. It s worth a try!
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  And what kind of DVD that you use to create a recovery disk? I have good experience with the types of DVD - R and I use Verbatim.

• Pavilion g6-2306el: problems with the recovery DVD-R discs

  Hello, it's only now that I saw that the DVD + R is suggested for all recovery discs burning. A little too late for me, since I bought several DVD-R to produce my game. Here is what happened: each disk has been created with difficulty; the burning process failed on all the others try. But in the end, I finally got the DVD-R 4 program have been burned and verified correctly. Now, when I tried to insert each disk to make sure that the laptop was able to read properly (the content supposed to be confirmed, after all), to my horror, I realized the first two discs were not being recognized. However, my patience was rewarded when, after a long time, suddenly, an Explorer window showing the contents of the disc. Taking advantage of the situation, I immediately copied this content in a folder on the desktop. It took me a long time to do this process for the content of the first two discs that had recognized problems. Subsequently I also copied the contents of the discs 3 and 4, which was much faster. Now, I have four folders with the corresponding content of the recovery disks in the office. The question is: can I use these content and burn on DVD + R this time, in order to have a working set of recovery disks? Thank you very much.

  Hi @anthony_s

  Thank you for your query.

  I understand that you have created your recovery on the wrong type of DVD disc and does not work.  You have copied the contents of folders on the desktop you and want to know if you can now create new recovery DVD on the appropriate type of files.

  No, it will not work.  I suggest that you contact HP support and inform about events and inquire about obtaining a recovery kit.

  Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.

  World wide phone holder

  I found this link on the HP forum, that you can read, I don't know if it works or not. Please let me know if it is successful.

  This is how to do a 2nd set of recovery disks.

  Good luck!

• Win 7 64 bit... HP Pavilion dv-7... Creating recovery discs... Years later... Problem of recovery?

  Discovered that I never did the recovery disks when I bought the HP Pavilion dv7-4073nr Notebook running Win 7 64 bit.

  Now, because Windows Updater does not work, some programs do not work.  (Have no idea, when he started).

  QUESTION... -What makes the recovery discs now, cause recovery issues when I do an "upgrade on the spot", as recommended by a cat of Microsoft tech?

  There is no virus, the tech ran remote diagnostics and confirmed what I already knew... Windows Updater is corrupted and are not accessible.  Bought a 3 TB external drive and have spent - hours and hours - backup with Win 7 Backup & Recovery tool and the Seagate dashboard. (Redundant).  I can NOT apparently make an Image of the 'system' (failed to backup MS 5 times... So I created a backup successful without it.  Then tried to just an image of the system and says there are files corrupt on C drive.  Has managed to create a system repair disc.  Since then, I try to understand what I'm going along, Kind ' needs to know about the recovery discs, I do now works, or if I'm just recreate the same problems?

  Thank you

  Diane

  Make recovery discs now lets start the laptop and do a fresh install.

• Recovery discs creating problem

  Hello

  I just bought a Lenovo 3000 N500 3 DG and I have this problem when I try to create the recovery disks:

  I do double click on unity of q, and the system then asks me if I want to do the recovery disks. Then I click 'Yes' and the system creates a first disc succesfully (labeled "disc 1 product thinkvantage recovery"), but then I inserted a DVD to make the second disc and when the system is it creates about 80-90%, an error occurs and the process is interrupted. This error occurs whenever I try to create the second DVD, exactly at the same point in the creative process. I tried a few types of DVD and none of them works.

  I think this may be due to a failure of the windows vista software, recording, because when I burn a DVD with Nero everything is Ok and when I try to burn a CD with windows, that an error occurs at the end of the process of the. Could someone tell me how to do the recovery discs?

  I also have a second question: the laptop comes with windows vista Home premium pre-installed, and I want to downgrade to XP Professional. Does anyone know if the warranty expires during a downgrade? And if I decide to do the downgrade, then I remove the three partitions (C:, q and S or the S: partittion is necessary for recovering the system?)

  Thank you!

  Please take a look at the solution in this post to see if that helps your situation. To let us know.

  If you upgrade to XP is not invalidated your warranty, the warranty covers the hardware and not software.

  If you create recovery discs for your Vista installation, you can delete all partitions, recovery CD will be recreated them when you use them.

  Hope this helps

  Edit; I forgot the link

• Problem recovery disc HARD on the Satellite C660

  My apologies if this is the wrong sub-forum:

  The fool that I am, I changed my WIndows login and password since I use very long passwords, I don't know what I changed it to. Guessing is out of the question.

  So I turned on my computer laptop while holding the key 0, what brought me to the Windows Boot Manager screen. I pressed F8 on Windows 7 for advanced options and opted for "Recovery Mode", as I've used in the past to install the operating system from scratch.

  It asks me to select a keyboard layout, and then enter my user name and password to proceed to the recovery of HARD drive. It is this lack of password which is the reason for the recovery.

  Any advice on what I can do?

  Thank you

  > It asks me to select a keyboard layout and then enter my user name and password to proceed to the recovery of HARD drive. It is this lack of password which is the reason for the recovery.
  On this step, you must enter your login name and login password of Windows. Without correct password, you will not be able to start the installation of HARD drive recovery.

  There is option to install the recovery image. You can do so now using recovery DVDs. You have created using the preinstalled Toshiba recovery disc creator?

• Satellite A210 - 4 1: Winload.exe problem after having used the product recovery disc

  Hello

  I could really do with some help here. I have a PC laptop Toshiba Satellite A210 - 1 4. Disk partitioned with Vista home premium service pack 4.0.

  Last night, I used the product recovery disc supllied with the laptop in an attempt to restore its initial configuration.

  and the end of the procedure, I find myself with a prompt cmd with X:\windows\system32\cmd.exe in the high bit blue box indicating:

  Error: imageX could not apply vista F:\05993xsp.swm Index 2 of ODD to C:\!

  Press a key to continue. Box disappears then an administrator: X:\windows\system32\cmd.exe in the top blue bit indicating:

  waiting for ODD vacancies...
  STRANGE drive f: loan.
  Look for support in the F: drive...
  Failed to initialize the raid class.
  No RAID - continue normally...

  X:\Windows\System32 >

  Now every time the laptop trying to restart it just comes up with the error message:

  CANNOT START WINDOWS. A RECENT HARDWARE CHANGE OR SOFTWARE MAY BE THE
  CAUSE
  FILE: \WINDOWS\SYSTEM32\WINLOAD. EXE
  STATUS: 0XC000000E
  INFO: THE SELECTED ENTRY COULD NOT BE LOADED BECAUSE THE APPLICATION
  IS MISSING OR DAMAGED

  Below I have then have the possibility of esc or continue with the same result of the system attempts to restart.

  The recovery disc has no option of repair on this subject.

  need help please, I have no idea.

  Thank you

  Hello

  Looks like something was wrong during the recovery procedure.
  Have you tried to recover the laptop once more?
  If this isn't the case, you should definitely try this!

  You are right; hasn t drive recovery option for the repair because the recovery disk is not the same as a MS Vista drive. The recovery disk contains image files (it s a package) and the files contains Vista, Toshiba drivers, tools and additional software.

  So if something was happening well wrung out during the recovery procedure, you will not be able to repair the installation of the OS, but you need to run it again.

• I get error code 0e01b5-26-00037200 creating recovery disc

  Original title: what is the 0e01b5-26-00037200 error code

  By making the recovery disc received this error code 0e01b5-26-00037200.

  If you have problems with the process of recovery of the manufacturers make recovery disks or their use at a later stage, contact the manufacturer

  It's their recovery process not microsofts

• How to create recovery discs?

  I just went to the Geek Squad to fix a problem (fixed) and the guy suggested I have reinstall windows because my computer is slow. I just need to know how to create the recovery disks?

  Contact the manufacturer of your computer to make recovery disks.

  This isn't their recovery process, Microsoft.

  Each manufacturer has their own way to do it.

  E-mail/phone them, or look in a manual or on their Web site.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And if you ever needed to do a start-up repair disc:
  

  How to make a Bootable ERD to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon. Mick Murphy - Microsoft partner

• best2serve pile of crap recovery disc

  Hello

  Two weeks ago, I ordered a set of recovery disc for an HP Pavilion ms215uk all in a desktop pc.

  I paid £31.06 for drives that turn up. (7 days from order to receipt) - fair enough.

  However - they did not work. Disc 1 is OK, but on the insertion of disk 2, I got an error in Dutch (not English) that the system recovery discs would not work on this system.

  Great Stuff - Hp cannot even provide the correct disks.

  Good so I then sent their emails of support of shit and got a response indicating that they would send others.

  7 days later the disks turned up and guess what?

  Yes - they do not have work - same message - Dutch once again - and after inserting the disc 2 disc 5.

  It's 2 weeks - no recovery drive of work for my system - and 10 coasters.

  What the hell is happening with this crap company. No phone support (now I know why) and only contact by email - which they have not responded to and its now more than 24 hours.

  All brands on the site - even HP Hp can't help saying that I need to contact best2serve.

  Well I can't contact them because there is no way to contact them outside of the email.

  As far as I am concerned the disks are under warranty and that I should beable to call and ask why they do not work or have at least my money I can buy a copy of windows 7 and do a reinstall completely Virgin.

  2 weeks is not good enough - I'm just glad that the discs are not intended for a customers machine. Best2serve are crap - useless - and not very reliable from what I've read on this forum and the net in general.

  Oh - and discs are not manufactured or factory - basically, they are 1 x cd blank with green dye and 4 x dvd with purple dye. In other words discs burned and unprepared discs.

  And they are not scratched btw.

  So my question is what you do about best2serve or Hp?

  I have to go to the negotiation of standards?

  Or

  I have to create a website denouncing the best2web service and support - I could do a good job of it too.

  Your call.

  concerning

  peedoffbigtime

  Hi Paul,.

  As promised I have news on the situation.

  And here are my results.

  After many phone calls and e-mails to Hp and best2serve, I figured out that the Pc should be sent repair.

  That's why the recovery disks wouldn't work - pc necessary fixation. EVIL.

  The recovery discs would not work because I had installed a new hardrive.

  The recovery discs check the dmi information in bios or dmi on the "original hard drive" string that is automatically written in sector 8 hard drive at the factory.

  Replace the hard drive or the motherboard and your recovery disks do not work.

  BIOS updates can mess up too, the dmi information which was not the case with this pc.

  It's the original Bios HP 2009 - there isn't another available on Hp website.

  However for some reason any (nothing that I did at all)-

  Model number: MS215UK

  Serial number: 123456789

  Version identifier: 94WEv6PrA2

  The string Featurebyte: 333rd 2S2V and so on

  Part number: VG256AA

  The country Code: #ABU

  has all the missing since the information screen of the bios by pressing F10 to access the bios.

  It was like that for / to the plant.

  To solve this problem, I used an Hp dmi tool that is not accessible to the public, but a google search for cpc_dmi hp tool should get what you need. He made me.

  The 2010 version is the one you need.

  So, I used the Hp Dmi's tool and the cpc_dmi.exe of a bootbale disk file and published this information.

  Once I had done that and saved the settings of the chip rom all the correct information was shown on the system bios screen.

  Now armed, knowing this info has been tattooed in the rom chip system I proceeded with the recovery disk install again.

  I used the cd 'First use this disc' and then started the drive 1 0f 4

  This now gave me a good screen of Hp recovery option rather than the screen in Dutch say the recovery discs would not work on this system message.

  Disc 1 0f 4 installed perfectly and so the other 3.

  My system is now recovered and working as it did in 2009 when purchased new.

  Then

  I corrected the error of recovery disks don't work do not.

  I stuck two fingers up to the Hp support.

  I saved myself over £100 + by sending only not in Hp update bios dmi information. (FIX my donkey)

  That said it took me two days to get this working correctly through complete trial and error, but I'm a happy guy now.

  Oh - and don't will never buy Hp again. They suck.

  Thanks for the help

• HP PAVILION ELITE E9280T D: CTO need new recovery disc

  I have a pair of old HP Pavillion E9280T desktop systems. I have recently installed a new hard disks on the two (both are identical machines, ordered that a pair of HP).  I also have a two sets of recovery disks that I made when the systems are new, saved on DVD.

  On a single system, I was able to successfully perform a full restore (return to factory settings).  On the other system, recovery stops on the 3rd disc in 68% and gives me the following error message: "Recovery Manager is unable to restore your computer by using the original image. Please contact HP support. 0xe0ef000e error code.

  I've searched the forums and found that many others have experienced this same problem.  I tried some of the proposed fixes, such as clean rags and Re-partitioning the hard drive.  None of them worked.
  
  For fun, I also tried to recover the system using the recovery of the other machine disks.  I discovered that I was able to do a full system recovery using these disks.  It tells me that I have probably a corrupt set of recovery disks and not a hardware problem.

  Unfortately, while it was fun to find out where the source of the problem, I can of course use the same set of recovery disc for both machines (I'm sure that Windows will blow up as soon as I connect to the internet and connect to MS servers).
  
  So my question is... what should I do?  I don't think that HP sells the recovery discs any longer.  But I have a copy of Win7 Pro that I paid for, trapped on the recovery discs that don't work.
  
  In advance, thank you for any suggestions or advice.

  OK... im going to answer my own question... I should have realized this earlier, before posting my initial question.

  I had a set of recovery disc for an HP same machine... at the beginning I don't think that I could use them... I did not know that the unique product key MS is not copied or assigned to the recovery discs... and since both systems where the same in all respects... it worked!

• Satellite A505-S6005: creating recovery discs power calibration error

  Hello

  just bought a satellite A505-S6005 and try to create recovery discs.
  I am using Dynex DVD - R.

  He created the 1st disk after the slightest mistake 2 times and when I started the 2nd drive continued to get again the message that is OE01BS-26 error Code - 2 said A 037303 power calibration area error occurred, check the disk for dirt or scratches.

  The disks are not scratched, and after going through 5-6 discs wonder if something is wrong with the optical drive & not the disks.

  Any help appreciated.
  Thank you.

  Hello

  I think it's a problem with your DVD media
  You are using incompatible disks!

  Try different DVD from different manufacturers.
  I m using the Verbatim or TDK DVD-R and my CD/DVD drive handles these discs without problem.

  Check it! I'm sure this will help you!

• where can I get the recovery disc for my hp pavilion a6863w

  Hello

  I got a blue screen of death issue. So I was setting the pc to the factory settings using the recovery on the HARD drive system. During the process, the pc has picked up on and now it won't do anything. Right guard reboot, not even start in safe mode. My HP Pavilion a6863w did not come with recovery discs, a section on the HARD drive has been designated for this. Before this happened I was able to run diagnostics and everything going on. processor, memory, hard drive, everything passed. How can I get the disks to recover. I have a HDD Seagate Barracuda 750. Help, please. Thank you for your time.

  Hello

  You can order a recovery ofSurgeons of the computerdisk.

  Jaco

  I'm not an employee of ch *.

  "" "" Please give a "Bravo, Thumbs Up" If the notice is relevant or "accept as Solution" to help other users of the forum having a similar problem.

• Satellite M30X: Trojan horse - total Formate with recovery disc?

  Hello

  I had a Trojan horse on my Satellite M30X. My Antivirus deleted, but every time I've been connected to the Internet, it appeared again. Not connected to the Internet it doesn't give me any problems. As I couldn't get rid of him, I backed up all my data and do a fresh install from the recovery disc. As long as the button for LAN wireless is disabled, everything works fine, but just a little while, after I turned on it, I get a blue screen. When I restart my computer with WIFI turned on, it produces a blue screen before Windows is properly loaded, even during installation. I tried restoring 3 times, but it's always the same result.

  1 is it possible, that the Trojan horse destroyed things of the pre installation?
  2. I can't choose to make a formatting during the recovery process. All data are lost, but I feel that's not formate the hard drive correctly, when everything is destroyed. It crushes just stuff?
  3. is there a way to make a good formatting, then install completely new Windows?

  It is not a problem of my WLAN card, internet being no problem under Linux.

  Thank you for your help

  Todier

  Hello!

  If you use the whole HARD disk Toshiba Recovery disk will be formatted so if you have any virus or Trojans on your laptop, they will be also deleted.

  But what BSOD code are you have? Are you sure that's the reason why the virus?
  You have the same problem if you connect a network cable to the laptop?

  Good bye

• Cannot install Windows 7 on Envy 14-1211nr of HP recovery disc sent twice

  Cannot install Windows 7 on Envy 14-1211nr of HP recovery disc sent twice

  The Recovery Manager starts well. He correctly completed the following steps:
  1 format HDD

  2. copy the files from the CD to the drive. It copies all the 3 CD.

  Then he ask the driver (the 4th CD) CD. Once I have this CD, then after awhile I get messge below:

  Contact HP support

  In most cases, recover the hard disk will solve your problems.

  If your problem persists, you may have to contact HP support. Find details of support HO in the documentation of your PC.

  After that I see above meaage the only button I can click is "Finish". Once I click on finish, then in a minute, I get a message that "recovery completed successfully.

  The laptop restarts and displays the message on the screen "Bootmger" not found

  I called HP support and asked to run the hard drive and memory test and he succeeded.

  I can install windows on another CD I have with.

  But I can't install WIndows using the recovery CD, I received from HP. It's the 2nd CD series that I received these don't work or the other.

  I have two identical laptops. Tried installing on both and having the same problem on both.

  Can you please help with this.
  HP sends fake CDs?

  Kind regards

  Hello

  Here is another solution, you can try to see if you can get Windows 7 to install correctly.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create an installation disk yourself using another PC - just download the good Disk Image ( this must be the version exact same origin supplied with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software, you may need can be found here.

  Kind regards

  DP - K