problem in my touchpad

Similar Questions

• Satellite A300-1EG: problem with the touchpad after installing Windows 7

  Hello!

  I had a problem with my touchpad since I installed Windows 7 (64-bit version) on my laptop (Toshiba) A300-1EG.

  I tried many different solutions to this problem.
  I checked the alignment of the touchpad (be it on) in the BIOS, I tried to install several drivers (on a site of Synaptics, automatically by Windows) and none of these work. Of course, I tried FN + F9 key combination.
  When I check the alignment of the touchpad in the Control Panel, everything seems fine. It is written, that "device working properly.

  I have Toshiba Software, what may be the cause of the problem?
  But I have no idea where I can find something.

  I'd appreciate any help.

  I hope to be understandable - English is not my mother tongue :) Thank you very much in advance for any ideas. :)

  Hi mate

  I'm not quite sure what problem you have but you should first try to install the necessary drivers touchpad m.
  Maybe you used the wrong driver in the past

  So Sat A300-1EG belongs to the series of PSAG4E.
  The European driver Toshiba page does not provide a special touchpad driver for Win 7 for this device.

  But I noticed that Win 7 64 bit drivers touchpad (Alps & Synaptics) for Satellite L500 PSLS3E series is released on the European driver page.
  Try both drivers Touch Pad for this device and test it!

  Welcome them

• Problem with the touchpad after upgrade to Windows Vista

  After that I've upgraded to windows vista I had problem with the touchpad, that I'm not?

  Can U help me!

  Maybe when you tell us what model of laptop you have. ;)

• Problem with drivers touchpad G550

  Hello!

  you have problem when instaled touchpad drivers from here:

  http://consumersupport.Lenovo.com/OT/en/DriversDownLoads/APR_Driver_List.aspx?CategoryID=600154&OS=W...

  This driver:

  Alps Pointing-device Driver

  7.2.1602.1301

  2009-09-10

  2.63 MB

  Windows 7 32 bit

  connected Okey, after restart, touchpad and keyboard does not work, does not

  Maybe someone of you guys have a solution?

  With this driver, I wanted to work my G550 touchpad scroll help?

  Try this one

• Problem with the touchpad doesn't work is not on the computer.

  Today, I was on YouTube, listen to music, when I turned the volume up to full. My laptop (ASUS) is a VERY high - pitched shrill sound that would not stop until I turned the laptop on sleep. When I turned on the laptop back, the screeching stopped but my Touch Pad stopped working. Fortunately, I have a USB mouse which I use now. I tried following the instructions to activate the keypad, but it does not work. I restarted my computer, and that did nothing.

  Help would be GREATLY appreciated.

  (also, I had problems with this laptop in the past, involving having to solve every time turned to have internet access, but a day that goes by and now the internet accessibility works very well.)

  Hi Lucie,.

  Thanks for posting your query in Microsoft Community Forum.

  What is brand and model your computer?

  Problems with the touchpad can occur due to a number of causes, including cables that are not connected properly, lack of updates, corrupt or drivers incompatible or because of hardware problems. So, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Try to run the suite of equipment fixit and see if the problem still occurs.

  Hardware devices do not work or are not detected in Windows

  Method 2:

  See the additional steps provided in the following article.

  Mouse, touchpad and keyboard with Windows problems

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Problems with my Touchpad

  Hello

  I recently bought a HP Envy M6-1125 and love it (for the most part). I can't do the seams to fix one of the problems are my touchpad. I don't know if its too sensative or simply faulty, but it does not normally for me. When I move the mouse, it shakes terribly.

  This becomes a big problem when you try to click a small button or box, because the mouse is shaken violently, even if my finger of does not move...

  Is there a way I can adjust the sensitivity? im hoping that this is the problem...

  If so, can you please guide me through it? This new program of windows 8 is almost impossible to navigate = /

  Thanks in advance for any help!

  Vlad

  You can follow this document for touchpad on win8 problem. http://goo.GL/jPEmg

  This will show you how to set the sensitivity to the touch.

  THX

• Tecra S1 - problems with the touchpad after update BIOS to 2.50

  Hello
  After the BIOS-update to version 2.5, the touchpad does nothing. From the docking station, the l' option option mouse PS2 works without any problem. Starting late, the touchpad no longer works. Normally - before the update - the touchpad began its work immediately after starting not rooted.
  What can I do to reactivate the touchpad?
  Juvenay clevain

  Hello

  Are you sure that your touchpad was not disabled?

  I mean the FN + F9 key combination to activate and disable the touchpad.

  This is why you should check this first.

  On the other hand a 3rd mouse driver part could affect the functionality of touchpad too.

  In my opinion, you should try to reinstall the driver for the touchpad and test it without connected part 3 mouse.

  Good luck

• Satellite 1905 - problem with the touchpad after awakening from Hibernation/standby

  Greetings.

  I've known a few interesting problems with my Satellite 1905 - S301.
  Whenever he wakes up from hibernation/standby my touchpad stopped accepting "taps" as a click on the left button of the mouse. It works normally with finger motion detection, but stops at all but it is quite annoying to restart the machine whenever he returns from hibernation mode.

  I've done a small workaround and after I close the laptop lid still works but this isn't the way it should work, I would have preferred that she either Hibernate than running for 10 hours without any sense;).

  Can someone give me the solution to this problem, please?
  Thank you in advance.

  Kind regards
  Akar

  Hello

  I agree with you. It s very boring to restart the machine each time to use the touchpad.
  This problem appears on the first day?

  I think there might be a software problem and, possibly, the new installation of operating system recovery CD Toshiba could help.
  I know, the complete installation is not the best solution, but it might help.

  You should also check you the touchpad. Satellite 1905 - S301 was designed for the U.S. market and so I checked the American website for available drivers.
  It seems that 5.3.203.2 is a newer version of the Alps touchpad driver for Windows XP.

  I suggest to reinstall the touchpad driver and check if there is no improvement.

• Problem with the touchpad on the Qosmio F50-108

  Hi all

  A few days ago, I bought this beauty of the machine.
  It works fine, except:

  My touchpad responds to no movement and any click I do.
  He worked a few hours, but then I disabled it, because I have a mouse, so I don't need in particular, but is not the result I wanted.

  After that I enabled again to work in a space where I can not put my mouse on the side you can imagine my surprise when it stopped working.
  In BIOS Pointing devices are turned on, and I think the keyboard Fn + F9 shortcut is activated, it still does not, tried the Synaptics driver (not compatible), only the ALPS drivers work.

  What can be the problem here?
  I posted here because it's very annoying send a laptop here in Croatia on Service, if it is possible I want to avoid.

  Thank you
  Mario

  Try to do a restore of the software to be sure (remember to backup everything!) but it sounds like a hardware failure.
  You might be able to get a replacement from the store that you bought it if you just bought it. Call them and see.

  Post edited by: alt236

• Strange problem with synaptics touchpad v6.2 on Satellite L30

  I get a 'bubble' come telling me that an another pointing device is leading my touchpad, and so I am unable to use the touchpad because it freezes / jumps / constantly displays this message.

  It started 4 weeks ago (only had the laptop 7 weeks) and the problem gradually becomes aggravated; It starts faster and only stops when I reboot (which takes some time with Vista!)

  Received no response and really at the end. Its so frustrating!
  I'm not very good with computers, but have checked all the settings & even when the pointer is not working, it says he works very well on its "Properties".

  None of my neighbors have wireless / bluetooth or infrared pointers. At the end of the mind.
  Help, please!

  > I get a 'bubble' come telling me that an another pointing device is leading my touchpad

  It is very rare, and my first thought was a problem of software because of the above message.
  As was suggested by the installation of the recovery CD should help.
  If this problem appears after installing some programs third 3rd and then it seems that these programs could have a bad influence on the installed touchpad driver

• HP 15 laptop: problem with the touchpad and the key "stuck."

  Hello!
   
  Last weekend, I have an irritating problem with my HP 15 laptop. Bought two years ago and upgrades to Windows 10 a year ago.
   
  First of all, my touchpad started to not work properly. It "freezes" and I can't use it until I click the ESC key, but it doesn't last and "freezes" again a few seconds later. Then, everytime I open a window where there is a text box (Start menu, edge browser, Control Panel, etc.), the number 5 is entered automatically and permanently, as if the button 5 has been blocked. I did a quick check and button 5 do not seem physically stuck.
   
  Yesterday, I restored the system to the factory settings, so I'm back to 8.1 for Windows and then upgraded to Windows 10. Everything seems to work fine, but this morning, the problem was back. Is there something I can do? What is the problem caused by Windows 10 or the computer? Should I restore it to Windows 8.1? Everything worked great til last weekend, I don't know what that was.
   
  Thank you in advance for your help!

  Welcome to the HP support community @gouch3.

  I understand that you have a problem with the keyboard and the touchpad on your laptop from HP 15.

  Have you tried to use a keyboard external and mouse at all?

  Have you tried to go to Safe Mode to see if the problems persist in there?

  Have you tried to perform a material or forced reset Reset?

  Did you do a test of material?

  Have you updated your drivers?

  gouch3 wrote:

  ... Is there something I can do? What is the problem caused by Windows 10 or the computer? Should I restore it to Windows 8.1? Everything worked great til last weekend, I don't know what that was.

  It could be a driver problem to be able to look at that for you, I need your model number. I wish I could give you an answer or not, but at this point without the troubleshooting results and the model number, it is difficult for me to say.

  I can say that if everything works in point 8.1 of Windows without problem, the driver TROUBLESHOOTING is a great place to start. Please try to follow these steps for the keyboard and the touchpad of troubleshooting:

  • Beginning
  • Search for Device Manager
  • Search results, open Device Manager.
  • Click on display
  • Show hidden devices.
  • Click the arrow next to keyboards.
  • Right click on the name of the keyboard device.
  • Select uninstall.
  • Continue deleting the names of devices in the category keyboards until the feature of all the names have been uninstalled.
  • Restart the laptop twice.

  Touchpad:

  • Type of research, "Device Manager."
  • Click on Device Manager,
  • Expand mice and other pointing devices.
  • Right click on the TouchPad,
  • Click on uninstall.
  • Restart the computer laptop twice,
  • Reinstall the TouchPad card.

  I found a document of troubleshooting for you to try also called Portable keyboard troubleshooting. Please be sure to follow the steps described in this document.

  The best document I have for TouchPad problems is the use and troubleshooting of the TouchPad and ClickPad document. 

  Here is a link to the HP Support Assistant, if you need it. Just download and run the application and it will help with the software and drivers that need to put up-to-date.

  This is a great question other clients may also be questioned. When we came to a resolution, please share what has worked for you with others by marking this post as an acceptable Solution. If you want to show appreciation for my efforts today, please take a second to click the Thumbs Up button below.

  If you need assistance, I would be more than happy to continue to help you. Please re-post with the results of the resolution of the problems. Could you please also provide your model number (How can I find my model number or product number?)

  Thank you!

• HP 15 Notebook P: I had a problem with my touchpad!

  my touch pad left button is still active as if she is always clicked and which prevents the touchpad from working
  I tried to reinstall the drivers and format my laptop and it didn't work

  Thank you

  It's a hardware problem. The button has somehow stuck in a mode clicked with two constantly connected contacts. It will have to be examined by a technician. The touchpad is aprt of the upper cover together so not inexpensive or easy to replace. Are you still under warranty?

• Problem with the touchpad left click

  I recently posed some problems with my left click under the touchpad. The touchpad is very well when I scroll over it with my fingers, the cursor moves, the right click (it opens upwards) also works very well, but the left click is not responsive at all.

  I'm on a Toshiba Satellite L305D

  Hello

  1. What is the exact model of the laptop number?

   

  Method 1:

  I suggest you to check if the easy access in Windows settings are appropriate.

  You can specifically uncheck the Activate a window by hovering over it with the mouse to the title of the ease of access Center if activated.
  You can refer to the link below for more details on the same-

  http://Windows.Microsoft.com/en-us/Windows7/make-the-mouse-easier-to-use

  Method 2:Remove drivers touchpad from Device Manager, and then reinstall.

  To reinstall the drivers for the touchpad by uninstalling current drivers

  Sometimes, there may be driver errors that prevent the touchpad from working.

  a. Click Start; on the start menu, search type devmgmt.msc and press ENTER.
  b. If you receive a quick click, consent to continue.
  c. expand mice and other pointing devices.
  d. right-click on the component of touchpad and click on uninstall.
  e. once the uninstall is complete, restart the computer.
  f. download the latest drivers for the touchpad of your computer manufacturer website and install it.

  Try to follow the link provided to update a hardware driver that is not working properly and check the question below.
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Problems with the Touchpad drivers and printer without administrative privileges.

  Original title: my drivers are slowly disintigrating.

  Hi, I have a Toshiba running Windows Vista.  Lately, the pilots were wrong.  My mouse driver is "undetectable", so I can't turn off the option to click the touchpad, and my printer driver not working or the other.  I tried to reinstall my printer software, and (even though I have administrator privileges on my login account), the driver will not be installed, indicating that it must be done by an administrator.  I have checked the computer of viruses and have found none.  What should I do to fix this?

  Hi KateGreen,

  1. What is the number of brand and model of your printer?

  You can try to uninstall the touchpad drivers and try to install the driver using administrator privileges.

  Step 1:

  Uninstall and reinstall touchpad drivers.

  a. Click Start, point to settings and then click Control Panel.

  b. double-click system click on hardware and then click Device Manager.

  c. click on the PLUS SIGN to expand unit

  d. click twice on the device driver.

  e. tab driver, click on uninstall

  f. download the latest drivers from site Web from Toshiba.

  g. right-click on the installation files and select run as administrator to install the drivers.

  Step 2:

  You can also uninstall the drivers for the printer and install the driver with administrator privileges.

  Check out the link:

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I have a problem with the touchpad does not not on Windows 7.

  Original title: help. My touchpad scroll has stopped working.

  I have a laptop of Acer Aspire 5750z-4830. Touchpad scrolling does not scroll when I try. How can I put it to the top after that I took it to be repaired? Since I got it home now it won't work. And I don't have the cd to reinstall.

  Hello

  Thanks for posting your question in the Microsoft Community forum. I understand that the touchpad scroll has stopped working.  I'll help you with this problem.

  Before troubleshooting, provide us with information.

  1. don't you make changes to the computer before this problem?

  This problem may occur if there are some differences in the file system or the associated scroll Touchpad drivers. Follow these methods:

  Method 1.

  Open the hardware and devices Troubleshooter: http://windows.microsoft.com/en-us/windows7/Open-the-Hardware-and-Devices-troubleshooter

  Method 2.

  You can also follow this link and check if that helps.

  Mouse, touchpad and keyboard under Windows problems: http://windows.microsoft.com/en-us/windows/help/mouse-touchpad-and-keyboard-problems-in-windows

  Method 3.

  Check if control panel touchpad mouse is enabled or not. Follow these steps.

  1 - click on 'start '.

  2 - Select 'Control Panel' click the icon of the '' mouse. '' If you don't see the mouse icon, select Classic view of the control panel.

  Tab 3 - Click the "peripheral" in the window that appears. Select the 'enable '.

  4 button - Click on the 'apply' and select 'OK '.

  Method 4.

  Alternatively, you can also try the following steps.

  1 - Locate the "Fn" button in the lower right or left side of the keyboard of the laptop. The 'Fn' key has different text color on it or the key itself is a different color.

  2 look for the function key (F1-F12) on the top of the keyboard that disables or active the touchpad on the laptop. The key usually has an icon that looks like a touch pad with a finger touch she or a touchpad with a diagonal line through it.

  3 - Press "Fn" both the touchpad function key simultaneously to reactive the touchpad on your laptop. Move your finger on the touch pad to make sure it works. Press to disable the touchpad again at any time.

  If you need help on this particular issue or any other related Windows issue, let know us and we will be happy to help you.

• Problem with the touchpad: Tap to click does not work if I use a standard account

  Hi all

  I have a problem with my laptop that I don't understand and I need help from the community.
  As the title says... If I connect to my laptop using a standard account the touchpad does not work if I try to tap to click. Left and right buttons work, move the slider works, works of scrolling, but endearing tape... not even a single tap. If I log in with my account as an administrator, the touchpad works like a charm, no problems. Tap to click and everything you want. If I disconnect the admin account and sign in as a standard user, the problems are back again. I can move the cursor, click on the two buttons (left, right), but I can't type to click...

  I tried to reinstall the driver for the touchpad (which is MOMENTUM...) but it did not. I tried to see if there is any option that can prevent this tapping or something... but in the control panel > Touchpad > Tap is turned on. A strange thing in the control panel of the Touchpad is that [when loggend as a standard user] I get an error "unhandled exception has occurred in your application. If you click on continue the application will ignore this error and attempt to continue. If you click on exit the application will close immediately. "and a new line saying"index was outside the bounds of the array. If I click on continue the error disappears, but reappears if stationary "double-tap" enable/disable option. If I click on leave the Touchpad Control Panel closes...

  All this trouble occurs only when I use the standard account. With the administrator account, I don't get any errors so I soar options, disable them, activate them and most importantly, the tap to click works.

  What is the problem with the standard account?

  I have Windows 7 Home Premium 64-bit Service Pack 1.

  Can someone help me please?

  Hi Johnxf,

  ·         Did you do changes on the computer before the show?

  As he works in an administrator account, then probably your standard user account have been damaged and would need a fix.

  Follow the article provided below to fix the corrupted user profile:

   

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Let us know if that helps.