problem installing sata 2 under Pavilion a6720f

Similar Questions

• problems installing network drivers hp pavilion g6-1d70us

  Hi, I have just again once installed a new operating system which is family Win7 premium g4 bits to my laptop, now I have problems with its network drivers.

  I tried to install the network drivers, but couldn't, I downloaded it from hp.com

  Ethernet controller

  PCi Simple communications controller.

  Properties of the SM Bus controller

  Properties of the network controller

  I think that these problems, why I can't connect to a wifi.tried facility does not solve the network drivers for hp.com.but my problem.it appears with a yellow exclamation point in Device Manager.

  I have to insert the modem to my laptop Pocket wifi just to connect to the internet, everything works well wait these above 4

  IM using a laptop Hp Pavilion g6-1d70us

  Hello:

  Here are the links to the drivers you need for this model.

  TheOldMan already granted by the driver for the controller PCI of Comms Simple...

  SmBus:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102010-1&cc=us&DLC=en&LC=en&OS=4063&product=5103993&sw_lang=

  Ethernet controller:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102007-1&cc=us&DLC=en&LC=en&OS=4063&product=5103993&sw_lang=

  Network controller (based on what HP shows up in the list of the parts for your model).

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-95652-1&cc=us&DLC=en&LC=en&OS=4063&product=5218682&sw_lang=

• problem installing Windows on HP Pavilion m 8070uk

  Hi I have a HP Pavilion m 8070uk with windows vista home premium, service Pack2, 32 bit, when I try to install a new program I get (the windows can not access the service install) my computer came with windows pre-installed vista, any help would be much appreciated, please note that I am no computer expert. Thank you, kev.

  First check if it is available in the services. Go to the start menu and type services.msc. If she is not there, chances are it also went in the registry. You will then use another computer with the same Windows Vista to get the file.

  On the other computer Windows Vista:

  1. go to start and type regedit and press to enter.

  2. in the registry editor, navigate to HKLM\SYSTEM\CurrentControlSet\services\msiserver. Right-click on the msiserver and then choose on export and then save it. It will be saved as a .reg file

  3. move the file using a reader flash or any other removable media to your computer.

  On your computer:

  1. double-click on the file.

  2. click on Yes to the next prompt.

  3. try to reinstall.

• Satellite P300-133 - problem installing Win Xp

  Hello

  I have a problem installing win xp to Satellite p300-133.
  To resolve this problem, I have tried the solutions:
  switch to ahci mode in bios and incorporating storage drivers compatibility intel to the installation cd xp with nlite, but none of them solved the problem.

  Laptop computer starts from the cd of xp and xp installation says "program Setup inspects your hardware configuration" and then a blank black screen comes.
  After that, the installation does nothing and waits indefinitely.

  Any ideas on this problem? Thank you.

  Hello

  > switch to compatibility ahci mode in the bios and the integration of the storage drivers Intel to xp with nlite installation cd, but none of them solved the problem.

  The two methods are good!
  You can install the Win XP without drivers Intel Storage Manager (SATA drivers) but in this case the SATA mode must be on compatible mode.
  It works for sure!

  The second method is the installation of the SATA drivers with nLite (drivers can be integrated into the new drive Win XP).

  I put t understand why this doesn t work on your laptop. I think it's a problem with your Win XP drive. Contains this Win XP SP2 or SP3?
  If this isn't the case, then you should use nLite to include min the Win XP SP2.

  Check it!

• Problem installing PCI-6220

  Hello

  I have problems installing a PCI-6220. The card has been installed a couple of years on a PC and rarely used. I withdrew from the it and connected to a new PC (Intel core i3 2.93 GHz, Windows7). After installing the card on the new PC in a first time, I could read the name of PCI6220 under 'Devices and interfaces' (in the program MAX) but I´d not been able to define it as a device. So I tried to remove the card and plug it in again and now the situation is even worse, I only see an "unidentified PXI system" in the program of MAX.

  Any idea what bad and what can do to make sure that the card does not work properly? As a reference, I need to connect to a CA-1000 enclosure housing a CB-68LPR device.

  Thanks in advance,

  G.

  Install the latest (9.3) DAQmx-drivers for your PCI, which could help.

  http://Joule.NI.com/nidu/CDs/view/p/ID/2337

• IPod Classic 7 G 160 GB ' there was a problem installing this hardware: Apple iPod USB Device ".

  I have recently (June 2014) bought a brand new Ipod Classic 7 G 160 GB Model A1238.

  Whenever I connect via USB to a PC running XP SP3 and Itunes V10.0.7.2 it is always treated as if it were a new connection, i.e. "new hardware found". After trying to install it, it says so "cannot install this hardware" and "there was a problem installing this hardware: Apple iPod USB Device."
  I have also a 2009 16 GB Ipod Nano 4 G model 1285 and this is recognized by the PC whenever it is connected through the USB port itself.
  I connected the Ipod Classic 7 G to a laptop running Vista and Itunes V10.0.7.2 where the Ipod is recognized and installed.

  Even if the PC States that there is a problem installing the Ipod, it still appears in Itunes and I can download music to it and disconnect by using safe mode disconnect.

  PC XP SP3 - Ipod Classic
  I watched "Device Manager" under "Drives", the Ipod Classic is listed as an "Apple Ipod USB Device", but has an exclanation score against it.

  Right-click on the 'Apple Ipod USB Device' properties and the "Volumes" tab it shows the drive with the exact name and the size of the data, by clicking on the properties of "Driver" tab it says 'Unknown' driver provider, driver Date and Driver Version as being "not available". By clicking on the "Driver Details" properties, it shows a driver file-

  C:\WINDOWS\system32\drivers\PartMgr.sys, File Version 5.1.2600.5512 (xpsp080413-2108).

  Under "Device Manager" USB controllers, there is an entry for "Apple Mobile Devices USB Driver" and a "USb Mass Storage Device"

  The 'Apple Mobile Devices USB Driver' lists two drivers:
  C:\WINDOWS\System32\Drivers\usbaapl.sys and
  C:\WINDOWS\System32\usbaaplrc.sys

  The "USB Mass Storage Device" list a driver:
  C:\WINDOWS\System32\Drivers\USBSTOR. SYS

  PC XP SP3 - Ipod Nano

  I repeated the steps above with the Ipod Nano, connected to the PC and the driver provider is presented as Microsoft with the driver as 07/01/01 Date and Version of the driver as 5.1.2535.0.
  In the "Driver Details" properties, it shows TWO driver files:

  C:\WINDOWS\system32\DRIVERS\disk.sys AND meanings
  C:\WINDOWS\system32\drivers\PartMgr.sys.
  At the same time with the Version of the file 5.1.2600.5512 (xpsp080413-2108).

  The 'Apple Mobile Devices USB Driver' and "USB Mass Storage Device" are the same as for the Ipod Classic.

  I followed the procedure to remove Itunes and even the update to Itunes to V11.2.2 nothing works.

  I am aware that the system is also that XP can now be updated.

  So, why not not Windows Installer Ipod Classic and why the disk.sys driver does not appear

  According to the details of the pilot?

  Is the 7 G Ipod Classic not compatible with XP SP3?

  Yes it is compatible with XP SP3.

  Try asking in the forums of Apple iPod:

  https://discussions.Apple.com/community/iPod/ipod_classic?CategoryID=204

• How to install XP on HP Pavilion DV2710US... Please help me

  Hi all!

  I tried to install Windows XP on my laptop HP Pavilion DV2710US but no success.

  Please help me, how to install XP on HP Pavilion DV2710US.

  Thank you all

  HP Pavilion DV2710US

  -

  CPU AMD Turion 64 X 2 Dual-Core Mobile Technology TL - 60 2x2.0ghz
  (2 x 512 KB of cache L2, 1600 Mhz FSB)

  -

  RAM 2048 MB - up to 4096 MB

  -

  HARD drive 160 GB SATA 5400 RPM

  -

  LCD display 14.1 "WXGA high definition BrightView Widescreen Display (1280 x 800)

  -

  VGA nVIDIA GeForce 7150 M - up to 799 MB

  -

  Optics: Support of X drive with Double layer LightScribe Super Multi 8

  -
  -

  3 x USB 2.0, VGA, TV, RJ-11, RJ-45, IEEE 1394 firewire (4-pin) out
  Camera + microphone Built in

  -

  "Dimensions: 13,15" (L) x 9.33 "(W) x 1.02" (min H) 1.54 "(maximum H)"

  -

  Weight: 2.0 Kg

  -

  PIN: 6cel Li-ion

  -

  56K modem, NETWORK card

  -

  Intel 802.11abg wireless

  -

  OS Windows Vista Edition Home Premium

  Message edited by hoannh on 06/09/2009 09:16

  Dear Alex!

  It comes from overheating while using Vista. But no self closed.

  How to try to use the cooling package when installing XP.

  Currently I use XP SP2 CD to install. What version of MS for DV2710U? (SP1, SP2, SP3)

  Thank you for your support

• Problem installing HP Deskjet F2280 and Windows7

  Hi people,
  I have a problem installing my printer hp deskjet F2280 all-in-one printer. Its saying its compatible on the windows 7 and custom allow to be the command "run under...". ».  This printer is only 6 months old :(
  Anyone got around this problem yet?

  Thank you

  Hello SeaCos,

  Thank you for using the Microsoft Windows Vista Forums.

  If notifies you that it is not compatible with Windows 7, you need to contact HP support to see all the drivers compatible. Are you following the steps below to set up your printer? Please let us know status. Thank you!

  http://www.HP.com/SBSO/bussupport.html

  Windows 7 install a printer
  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Open devices and printers, click the Start button, and then click the start menu, click devices and printers.

  Click Add a printer. In the Add Printer Wizard, click Add a local printer. Choose a printer port page, make sure you use a button existing port and the recommended printer port are selected and then click Next.

  On the installation of the printer driver page, select the model and manufacturer of the printer, and then click Next.

  If your printer is not listed, click Windows Update, and then wait while Windows searches for drivers additional. If none is available and you have the installation CD, click disk, and then navigate to the folder where the printer driver. (For additional guidance, see the printer manual.) Perform the steps in the wizard and then click Finish.

• Problems installing ZTE made map of internet data MTS on Vista

  Hi all

  I had problems installing a basic manufactured ZTE map of MTS internet data on my 32 bit Edition operating system, Windows Vista family. It's a HP Pavilion Desktop PC.
  When I install the data card a pop-up box comes up saying SETUP.exe. Then I run the installation file and it begins to install. Only towards the end it shows installation modem, then a pop with a Cape "Driver Installation" box comes up saying - "FAIL TO INSTALL MODEM. () - 536870389). »
  I spoke with the Multilateral Trading System (sellers of internet data cards), and they said to try the card of internet data on another system. I did and it works on my laptop and my office who has Windows XP. Then, it was clear that there is no problem on the side of MTS. The problem was with my HP Pavilion Desktop that is running on a 32-bit operating system, Windows Vista Home Basic.
  I then called HP customer support and they said to remove any program extra antivirus that I may have. I did but still no help. Again I called HP customer support and they said to take back all my files and perform a system recovery. I do that and then downloaded relevant drivers of drivers.blogspot.com and installed on my computer. After doing all this again I got the same error.
  Customer support HP said that there is no problem with the equipment and that I would need to Microsoft when there may be a problem with the WIndows Vista software. I called Microsoft customer service and they said to type the details of this error on answers.microsoft.com so here I am.
  Can someone help me solve this problem?
  I'd be willing to provide any other necessary information.
  Thank you.
  Concerning
  Jackie.V.H.
  Bangalore
  India

  Hi Jackie.hin,

  Method 1
  I suggest you to install the data card drivers in the clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: follow step 7 of section of boot KB929135 to the computer in normal mode.

  Method 2
  If the steps above fail, then I suggest uninstall you the data card completely drivers by running the fixit and then re - install.

  Diagnose and solve the program installation and uninstallation problems automatically
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

  Additional information:
  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer
  http://support.Microsoft.com/kb/2438651#reso3

• Error "Windows has encountered a problem installing the software driver for your device." Windows found driver software for your device but encountered an error trying to install it.

  So I got a wireless mouse for my first time and it won't even install on my computer. It isn't the mouse because I tried other wireless mice and none of them work. In my device under other devices Manager there are only 2 USB receivers listed with question marks next to them. It is said that they can not find the drivers for the device. Then under my HIDDEN I tried to update the HID-compliant device and the USB input device, nor able to update. This is the message I get.  Windows encountered a problem installing the software driver for your device. Windows found driver software for your device but encountered an error trying to install it. Peripheral HID-compliant, the system cannot find the specified file. I already contacted EVGA about the issue, because there is where I got my motherboard, but they said to contact Microsoft and I didn't really want to pay 50 dollars to send them an email. That's all just ridiculous.

  Well, I found the solution, just in case anyone has the same problem.  Apparently some day caused Wireless does not work on several computers. So you go into Manager for all of these research and device drivers manually. Then, you look for in C/windows/winsxs. Then the wireless mouse/keyboard should work.

• Problem installing vmware in Ubuntu 11.10 tools

  I've upgraded from vmware workstation 7 to 8 on a windows 7 pro workstation. I've added to my VM - 11.10 Ubuntu guest. Now I have a problem installing vmware tools.  That's what I did:

  ((1) installed Ubuntu 11.10 CD in the drive, 2) open vmware and Tools CD added to office.  (3) connect you open terminal window.and.  Since I'm new to Linux, I'm stuck on how to set a password.  I type sudo passwd root, and I can't type anything in the window.

  Ideas or suggestions will be greatly appreciated.  Thanks in advance.

  You have two questions unrealated

  (1) with respect to the OS - Ubuntu 11.10 - these shoud guest invited on ubuntuforums.org Creafe a connection there and ask in the beginner's forum.

  Tip - You don't really have need a password for root in Ubuntu.  Use you sudo to run root permisssions wherer programs are needed.  He said on top of each terminal.

  (2) you have any questions on how to install VMware Tools in a Linux (Ubuntu 11.10) Guest.  You most certainly need assistance with this.  In the toolbar of the program, you will see a tab called "Help".  It only contained other information you are looking for.

  See the sections on VMware Tools.   They are really useful!

  Tip: You do not use the OS installation disc that you used to create the virtual machine. Look closely under the VM tab at the top. There will be an option in the drop-down list that says "The Install Vmware Tools" you need to select this option.  The insatll will be mounted as if by magic in SLE directory/Media in the comments.  Copy the tarred on this cdrom in / tmp.  Then naviagate (carefully) in / tmp and unpack the file you copied.  Carefully change (look at you spelling - do what I say - not as I do in this post!) to the directoyrf that was created.  Exceute as su (i.e. root - like in the 1 trick.)  the .pl program wiil be contain breast.  Technically, this is called a "script" don't forget to put a. / before the script name or the bad dthing don't know he lives there.  He will ask youj on many issues.  Answer Yes to all these thatg you can.  Most likely, he will say he does not find the gcc compiler (gcc to learn more about the new program of thisbrfand the man.  He complains of missing headers.  Exit the script (Ctrl + c).  Run a progarlm (as root!) called apt - get.  Type the command apt - get install build-esseential.  Thatt is going to install the compiler you need!   Yes still needs to install the header ogical file well! Phew!  The best way I found to do this is to install a nifty program called synaptic. Use apt - get install synaptic.  I think that Ubuntu even comes with a somewahat more easy to program called apt - get it will tell you and have fun there no Super Powers mean if you type an incorrect order!   I digress from the subject.   So, you can use use "sudo aptitude install synaptic l.  Now issue the command uname - r.  He sleeps on the same kernel you use since I use Ubuntu 11.10 asI type while I'm about to uplgrade to the very scary Ubuntu 12.04.  You don't want to do it yourself.

  3.0.0 - 12-Generic

  Now launch Synaptic.  There will be a message the first time on the program expalining.  If you want to see it every time to understand this program if y0ou forget don't check the box saying you don't wang to see this every time.  BTW youi will be asked for your root passworfd to run the program.  Hope you rfemembered it!

  In any case in the search box copy, then paste the result above (one that ends with - generic - but anything copylthe) there will be l be a long list of items, but choose the one that has the string above and the word "headers".  Insatll who.  After all it can return to the order which took end. / pl and run it once more.  Answere questions.  It will end with the encouraging words (you can take advantage of the VMware Tools.  Then, run the command - vmware-toolbox as it says.

  F well there you have it in short.  My price for Linux and Mwar advice is reawsonable please contact me at one of my addresses, alias - [email protected] and we can talk about payment.

  Enjoy

• Problem installing CF8 on local IIS Server XP

  Hello
  
  I try to install CF8 developer under XP with IIS.
  
  I tried literally dozens of times and always the same result - when I go to
  
  CFIDE/Administrator ( http://127.0.0.1/CFIDE/Administrator/index.cfm)... the .cfm is not
  
  analysis and the system tries to open the file with a text editor. If I try and press on the
  
  Directory ( http://127.0.0.1/CFIDE/Administrator/) I get the message "Server error".
  
  1 > I have IIS installed no problem with default Web site settings and select as 127.0.0.1
  
  It's IP, I also tried once leaving "Unassigned".
  
  2 > I disabled and then went as far as to uninstall any antivirus, firewall etc before
  
  try to install the CF
  
  3 > I tried to remove myself from any LAN access, routers, wireless etc.
  
  4 > I tried all three boxes on the installation screen that appears asking one
  
  configuration of the server, and on the selection of radio 'specify' I tried a little different
  
  configurations of
  
  5 > I have redownloaded the thinnking of installation that maybe something was wrong with that
  
  6 > I tried to install an older version (MX) of CF bit even result.
  
  In the past (my last computer has Win 2000 Prof) I had no problem... IIS, allowed to the left
  
  settings, SEE installed by default and how I worked...
  
  Any ideas on what the Devil's going on or how can I fix this?
  
  Thank you very much! :-)

  Check your configuration in IIS to verify that ColdFusion (cfm, cfc, etc) file extensions are associated with the jrun_iis6.dll.

  In IIS, right click on your Web site and open the properties page.
  On the Home Directory tab, click the Configuration button
  Check your settings on the Mappings tab

  There are batch files installed to C:\CFusionMX7\bin\connectors\ that will automate the IIS configuration in CF7. You could look for a similar directory in CF8.

  Alternatively, you can verify that the changes made the installation of IIS is not blocked by security software.

  This link can help.
  http://livedocs.Adobe.com/ColdFusion/8/htmldocs/help.HTML?content=webservmgmt_5.html

• Problem installing device a1530n

  Running Win XP Media Center Edition.  Had minor graphical problems at the top of the IE bar periodically endangered.  Decided to remove the Intel (r) 82945G Express Chipset adapter in Device Manager and then do a scan for new hardware.  And now I get the message of the new hardware detected that says.

  Cannot install this hardware

  There was a problem installing this hardware:

  Intel (r) 82945G Express Chipset Family

  An error occurred during the installation of the device

  Access is denied.

  I am connected to the computer as an administrator.  I tried to install this even in safe mode and get the same error above.  Any clues on what do I do?  The computer runs only in VGA mode.

  Thanks in advance.

  Link to screen shot of the error message.

• What ieee 1394 pci card Fireware should I install to my hp pavilion h8 1234

  What ieee 1394 pci card Fireware should I install to my hp pavilion h8 1234?  I need to run a Nikon Super Coolscan 8000 Ed currently using Windows 7.

  Thank you

  2Wander

  A PCI Express x 1 card that is compatible with the operating system installed. You can find one at NewEgg.com or another provider online. Use Google or Bing to find the one you need.

• Problem installing LAN USB adapter in a new copy of windows 2000

  After having reformatted my hard drive and install a new copy of window 2000, I'm having a problem installing device drivers.  When I enter the correct inf file path, it reports that this window has not found a driver for the device.  Whithout the possibility to connect to internet, I have exhausted all my options and still need to install several other drivers with the same problem.  help help help help

  Everything you try to use (you do not give the brand / model of the LAN USB adapter) made drivers for Windows 2000?