Problem installing software with a nonadministrator account

Similar Questions

• Problem installing software of Bluetooth Enhanced Data Rate II (v6.2.1.3100)

  Hello

  Today, I have improved some Lenovo drivers, including the bios v1.20. When I was upgrading software Bluetooth Enhanced Data Rate II to the 6.2.1.3100, offered on the page version drivers for t400s, I got the following error, almost at the end (sorry, the OS is in Dutch): "there there was an error during the installation of the political party...» ». See below:

  

  After that he has automatically restored the update, however probably not completely, because now when I reboot with active BT I get the following error, also in Dutch: "the program can't start because btwhidcs, DLL is missing from your computer. "You may be able to solve this problem in re - install the program.

  

  My backup files, I've restored the previous version 5.2.1.2900 Setup file, but am also unable to re - install and make two mistakes now. I must have been able to install 5.2.1.2900 with the previous bios, because it was the version I checked before you run the 5.2.1.3100 update!

  How can I solve this (apart from doing a full system restore). I would not be able to install the new driver properly? If this is not the case, how can I restore BTtray.exe then.

  Thank you, Jan

  Looks like there's a problem install the Visual C++ 2005 redistributable. You can try to install these first manually by using the links below:

  x 86 version:

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=200B2FD9-AE1A-4A14-984D-389C36F85647

  x 64 version:

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=EB4EBE2D-33C0-4A47-9DD4-B9A6D7BD44DA

  Even if you are using Win 7 x 64 (assuming you are using Win7), according to me, you need the x 86 redistributable og version for this software. If you already have an earlier version of the redistributable installed, you might as well try to uninstall first and then reinstall Microsoft Download or try to install the BT software after uninstalling. So, you can try to uninstall the BT software and start again.

  If you already have version BT 6.2.1.1400 installed, you should ensure that you have a complete backup since this version had a serious bug when installing/uninstalling this version could wipe you HDD. I know that this is related to the 6.2.1.1400 only.

  -gan

• Problem installing software for all-in-one Deskjet F4210

  Hello.

  I have a problem when you install the software for my HP Deskjet F4210 all-in-One printer.

  First of all:

  • I am running Windows Vista Home Premium x 64.
  • I tried the 3 installation methods:

  (1) installation CD.
  (2) installation of downloadable x 64 Installer.

  (3) installation of downloadable x 32 Installer.

  I get the same error message (series) at each facility.

  I also tried each method of installation mode execution "Run As Administrator". Which is not exactly change the result.

  Just to try, I tried to install it on Windows XP, and it has worked very well with no error message.

  I don't know what the problem is, but I have screenshots with legends and a comment by each (to me) that explain everything.

  * Note: You can click ON the picture to SkyDrive show in its own window.

  Images:

  1) HP Installer screenshot 1

  2) HP Installer screenshot 2

  3) HP Installer screenshot 3

  4) Setup HP 4 screenshot

  If anyone can help, please do.

  I really hope that these screenshots can be useful.

  They are in order of appearance.

  Twitter: @mgarcher007
  
  My rig: HP Pavilion a6645f Special Edition: Verde.
  CPU: AMD Athlon 64 x 2 4850e @ 2.50 GHz
  RAM: 5.00 GB DDR2 800 MHz
  HDD1: 500 GB Seagate Barracuda, 32 MB cache
  HDD2: 1.5 TB Western Digital Caviar Green, 64 MB cache
  Optics 1: HL DVD-RAM
  Perspective 2: Pioneer BD-R/DVD-RW
  Graphics card: Single EVGA GeForce GTX 260 896 MB 448 - bit GDDR3 PCIe 2.0 (Yes, the card just fits, I have only one other device PCIe [a HDMI intensity Pro capture card] and I can't even keep the side panel of the computer, because the card sticks out.) I'm working on a mod for that matter).
  PSU: Ultra x 4 850w modular; SLI and CrossFire ready
  Various: Intensity Pro (HDMI capture card) for the capture of Xbox 360 and PS3 game and making game vids/fixtures.

  Hello

  You use Internet Explorer version 8? If so, uninstall Internet Explorer version 8, and then try reinstalling sw of the printer driver. You can reinstall Internet Explorer version 8 after you have reinstalled successfully the sw of the printer driver.

  

  Kiko

• Problem installing Bluetooth with Satellite C875 - 136 PSCBCE

  Satellite C875-136 PSCBCE-01J002FR

  Hello

  I have a problem with the installation of the Bluetooth driver.

  I tried to install the driver bluetooth on Windows 7 x 64 but the freezing of the "driver installation" installation in Toshiba Bluetooth monitor

  I have installed Realtek WLan, battery Bluetooth Realtek and after the Toshiba Bluetooth monitor.

  Do you know how to solve this problem?

  I tried also with the Toshiba Bluetooth monitor v9.

  Installed files:
  http://Support1.toshiba-tro.de/Tedd-...0510093258.zip
  http://Support1.toshiba-tro.de/Tedd-...0510084139.zip
  http://Support1.toshiba-tro.de/Tedd-...0914172315.zip

  Hello

  The point is that you have installed the BT tools and software in disorder

  To get the BT working, you need to first install the Realtek Wireless LAN Driver then the
  Driver Realtek Bluetooth package filter then battery Toshiba BT
  The reason is that mobile use a WLan / BT combo card.

  The application of the monitor BT transforms the Bluetooth module power in conjunction with the Bluetooth stack.
  If its not really necessary get the BT working.

  Here you can find the BT portal, including the BT stack!
  http://APS2.toshiba-tro.de/Bluetooth/?page=download-Toshiba

• problem of password with former iCloud account Apple

  My wife's iPad has suddenly developed the following fault.

  A box with "connect to iCloud / enter the password Apple ID for"old account"appears every time." The problem is that the Apple account he mentions has been disabled or cancelled a long time ago [email address doesn't even exist now] so I can't enter or reset the password.  I looked on the forum and there are problems that closely resemble this but they say to go to the settings, but I can't because the Tin just appearing! I also re started several times, but the box until I can try anything.

  I sync ipad with iTunes and it is currently updating the software as is currently ios 7.0.3, however, this update takes a long time to download. Could be the problem?

  I did contact the Apple support line, but because I live in Spain their system is in Spanish which I am not competent enough to understand.  I tried to open a session as long as UK, but their call back is only a UK number.

  I hope that above makes some sense, and someone can help!

  Thank you very much.

  Response to my question above, I found the answer on youtube and incredibly, the answer is to change the date on the ipad [you must move fast to click on the buttons to the right until the box keeps popping up again]. It was as simple as that!

• Problem installing software in FPGA

  Hello

  I bought an FPGA (9074).

  Following the help to get it runing it says I need to install the software using MAX.

  The device was found in MAX, the network configuration works.

  Right click on 'software '? "" remote systems "to add the basic software for operating the unit.

  I only get the first option (OR-RIO 3.1.0 minimal, January 2009), the others are grayed out, so he ends up with not a lot of functions in Labview to develop my program, I have no serial communication or the PID function for example.

  I'm using Labview 8.6.1.

  I have the module 9263 (analog output) and his work very well with the 9074.

  What should I do to be able to install a more complete set of software outside the minimum?

  Sandro

  Problem solved, any new, OR just last installed device driver.

  Thanks for the reply.

• How many times can you install reflow with a single account?

  I have installed by reflow to the computer of my job, because it's free on the preview mode, but then I realized stupidly that Adobe would not install many of the same program on the same account in another computer? I want to install reflow at home as well using the same account. Adobe will stop me to do this?

  There should be no problem with installation of reflow on both computers using the same account Adobe Creative Cloud.

  VIC

• Problems installing software hp after system recovery system

  I just replaced the motherboard due to the failure in an hp g60. I tried using the recovery of the system since the partition and the computer reboots after about 20 seconds in the hp software installation process. Then the system recovery screen would jump upward to want to me again the whole process. After 3 times to do, I did a scan of seatools hard disk and it tested ok. Then I thought that maybe there was a file corrupted on the partition, so I ordered the hp recovery discs. I ran these discs today and I got almost 3 quarters thanks to the installation of the hp software when a screen poped and told him to end the windows session and the computer restarted again. When he started upward, poped system recovery window back up and asked me to do it again. I'm looking for any help/suggestions on this subject. Thank you.

  Hello

  This could be the problem as HP recovery disks check for a "tattoo" on the bios to make sure that the operating system is installed on the machine, that it was intended.  One way to confirm this would be to install an OS on a retail disc - even if you don't activate - just to see if this will load ok.

  Best wishes

  DP - K

• Problems installing software JO 8600 pro hp as wireless on win 7 pro

  Computer no HP Officejet Pro 8600 Premium N911N, Win 7 Pro

  I installed the printer as wireless six months initially.  It worked without problem until a few weeks ago the scan function would no longer work.  The screen of the printer has an error message which I have omitted to write but as I recall it was a failure of communication and listed the possible reasons [3].  The print function worked fine.  Printing and scanning doctor froze after choosing to set the scan function.  I uninstalled the existing software to install the full features software, that I downloaded.  I was not able to reinstall the software from.  I chose the wireless connection and the software crashes when searching for devices, never find any yet the printer is connected to my network.  I repeated the process, more than a dozen times and times [2] the facility found the printer but has frozen shortly after that I chose and I continued.  I have to finish the program in the Task Manager.  I currently installed the device in USB and tried to convert wireless, still frozen.  Scan and Disk Doctor does not work because it says I don't have the full software installed.

  I'm sorry that the link does not work. I have re-posted here 'Windows 7: the Network Installation hangs on the control environment of the network screen'. Please let me know how the troubleshooting.

  Thank you.

• Problem installing software for a purchased HP2544 today

  Hi all

  I tried to install the software using the CD but I get a blue screen and memory dump came?

  I went to the HP website and downloaded the latest software and drivers for it, 64 - bit Windows 7, but I still get the same error during installation.

  I tried to install this several times tonight.

  Someone at - it ideas?

  Have never had this problem before installing any software in the past.

  Thank you very much

  Rob.

  Hello Robflyer3,

  Welcome to the HP Forums!

  I understand when you are installing the software from the CD or the HP website you receive an image screen blue/memory. I will do my best to help you!

  You connect to this printer wireless or USB?

  I need to know at what time the blue screen occurs during installation? Did you see an error message when this blue screen? If so, please send the code of error on this post.

  I would recommend a running System File Checker by following this Microsoft document here. This utility under Windows that allows users to find corruptions in Windows system files and restore the damaged files.

  I will seek forward at the hearing on your part have a good night!

• problems installing software hp photosmart c5180

  Hello my c5180 and my 64-bit windows 7 will not match

  It wil not install more software hp for printing / scan / copy.

  who can give an idea, s/help

  its starts with fr installation a few minutes later, gone is the installation screen.

  and nothing happens?

  I tried:

  AIO_CDA_Net_Full_Win_WW_130_140

  Thank you

  Hello jvdl,

  Welcome to the Forums!

  I saw your post on the questions you have install your Photosmart C5180 on your Windows 7 computer. I understand the installation will start, and then stop and disappear.

  I would suggest after each step from the document below to hopefully help you to install the software.

  On the Software Installation progress bar stops or crashes

  I hope this helps you!

  Good luck

• Problem installing RCU with ADR: database Version does not match

  People,

  Hello. I have implemented PeopleSoft Campus Solution 9.0 revision 5 for a University.

  I need to develop the application for Admission online for future student to apply for admission.

  My installations of PeopleSoft are below:

  Server machine: Oracle Linux 5.10 (64-bit)

  Client computer: Windows XP Professional (64 edition) with the Internet Explorer browser

  Architecture Internet Oracle Linux 5.10 Server:

  (1) database server: Oracle Database 11 g version 11.1.0.6.0 is

  (2) the server application: Tuxedo 11 g

  3) web server: logic of Web 10.3.6.0

  (4) browser: Firefox Mozila

  (5) two Instances of huge database on the database server: 8.53 PeopleTools and Campus Solution 9.0.

  In order to develop the application for Admission online for students from the perspective, I need to make 3 parts below:

  (1) ADR installation (Application Development, Runtime) 11.1.1.6.0 (64-bit)

  (2) install the RCU 11.1.1.6.0 to create the scheme of OWSM_MDS (32 bit)

  (3) create or expand the WebLogic domain

  I installed Oracle ADR 11.1.1.6.0 (64-Bit) with Weblogic 10.3.6.0 in machine Server Oracle Linux 5.1 with success.

  Now I install RCU 11.1.1.6.0 (32-bit), on step 2 of 7 audit of the overall requirements, I face a problem like below:

  Type of database: Oracle Database

  Host name: 192.168.196.102

  Port: 1521

  Service name: HRCS90

  User name: SYS

  Password: mypass

  Role: SYSDBA

  Database is connected successfully. Verification of the 2 first elements are passed successfully.

  But check the 3rd issue "Check condition for the specified database" has not passed. The error message is below to:

  "The database that you are connected is not a supported version. Enter the database with version equal to or greater than 10.2.0.4.0 in 10 g or a version equal to or greater than 11.1.0.7.0 in 11 g. See the matrix of certification for the supported DB version".

  My database is the database Oracle 11 GR 1 material which is 11.1.0.6.0. This version corresponds to Tuxedo 11 g and WebLogic 10.3.6.0. If changing the database version, the entire Architecture of Internet PeopleSoft should be changed.

  The version of the RCU I install is 11.1.1.6.0 (32 bit) which does not really match ADR 11.1.1.1.6.0 (64 bit).

  My questions are:

  (1) what version of the RCU can be installed with Oracle Database 11 GR 1 material is version 11.1.0.6.0 (64 bit) and MARC 11.1.1.1.6.0 (64 bit) ?

  (2) is there another way to solve this problem? Find the right version of the RCU or update the version of database?

  Thanks in advance.

  Or you can try to do this work around (this work around will ignore checking the version of database)

  http://www.xenta.nl/Blog/2009/11/17/install-Oracle-fusion11g-repositories-on-11g-DB/

• Extreme problem of airport with the guest account

  It drives me crazy! I had the extreme AC router from the airport for a couple of years now. It works perfectly if the guest account is disabled. Whenever I try to enable the guest account access, I have a time very very difficult to connect to this account. The main and guest account are both set to wpa2. When I connect, I get proverbial bells and whistles go telling me airport utility system is set to be implemented via cable wan which decreases the Security (in my own home that is not a problem) and it tells me to put it in bridge not NAT and DHCP mode. If the clipping the guest account value absolutely not allow internet connection. What I am doing wrong?

  The macbook, I am trying to connect is running LION

  What is the brand and model of the modem Internet you have your AirPort Extreme, directly connected by Ethernet?

  If this device is actually a combination modem & router, then your extreme must be configured as a bridge. Guest network does NOT work in Bridge mode.

• Problems installing driver with a clean install of Win7 on envy hp 15 t - j100.

  I was able to install Windows 7 Pro USB on my laptop.  The drivers that I downloaded from hp site have errors when I try to install.  Most of them said that the driver was not installed correctly and gives the opportunity to try again or did it install correctly.  I tried to reinstall, reboot, etc.

  One of my biggest problems is that I can't connect to wifi even if I use the recommended drivers.  When I tried the NVidia driver, he did not recognize the card on my device and I cannot adjust the screen resolution.

  Should I have installed the drivers in a specific order?  Thank you!

  That's ok.

  Here is the wireless drivers you need... They are arranged in the same way as other...

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=24170

  Bluetooth:

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=24189&lang=eng&ProdId=3714

  ACPI\INT33A0

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127800-1&cc=us&DLC=en&LC=en&OS=4063&product=6521374&sw_lang=

• Problem blackBerry software with link BB when syncing with BB Q10

  I've been using link BB 1.2.3.56 on one of my PC for 8 months now, but a particular type of behavior has recently developed.  After connection Link tries to synchronize the calendar and other data and then a pop-up window will appear as follows:

  ---------------------------
  Microsoft Visual C++ Runtime Library
  ---------------------------
  Runtime error!

  Program: ...es\research in motion\blackberry link\BlackBerryLink.exe

  This application has requested the execution to terminate in an unusual way.
  For more information, contact the application support team.

  ---------------------------
  Ok
  ---------------------------

  I tried to repair and reinstall same link, but the problem persists.  Any ideas?

  Thanking you advance a solution.

  OK, so the operating system is WIN 7 SP1 and Visual C ++ could be 2005, 2008, 2010 and 2013.  I don't know you are using.

  Some programs have been installed before the fault that appear, but some have been uninstalled.

  I was encouraged to re - install Link, but this time I checked the box to delete the existing settings so that the later installation would be "clean".

  It worked, so that some of the settings were incorrect due to the Elimination of some programs that are accessible by link.

  I would recommend to all those who have problems of this type link check the deletion settings to uninstall because clearly this would cause the link to fail if anything here is false.

  Thank you for your time and I hope that it will be useful to others.