Problems installing software JO 8600 pro hp as wireless on win 7 pro

Similar Questions

• Problem installing software with a nonadministrator account

  Can I install software on my pc using a non-administrator account?

  Can I install software on my pc using a non-administrator account?

  Yes. IF and only if you have the admin password. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Problem installing software of Bluetooth Enhanced Data Rate II (v6.2.1.3100)

  Hello

  Today, I have improved some Lenovo drivers, including the bios v1.20. When I was upgrading software Bluetooth Enhanced Data Rate II to the 6.2.1.3100, offered on the page version drivers for t400s, I got the following error, almost at the end (sorry, the OS is in Dutch): "there there was an error during the installation of the political party...» ». See below:

  

  After that he has automatically restored the update, however probably not completely, because now when I reboot with active BT I get the following error, also in Dutch: "the program can't start because btwhidcs, DLL is missing from your computer. "You may be able to solve this problem in re - install the program.

  

  My backup files, I've restored the previous version 5.2.1.2900 Setup file, but am also unable to re - install and make two mistakes now. I must have been able to install 5.2.1.2900 with the previous bios, because it was the version I checked before you run the 5.2.1.3100 update!

  How can I solve this (apart from doing a full system restore). I would not be able to install the new driver properly? If this is not the case, how can I restore BTtray.exe then.

  Thank you, Jan

  Looks like there's a problem install the Visual C++ 2005 redistributable. You can try to install these first manually by using the links below:

  x 86 version:

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=200B2FD9-AE1A-4A14-984D-389C36F85647

  x 64 version:

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=EB4EBE2D-33C0-4A47-9DD4-B9A6D7BD44DA

  Even if you are using Win 7 x 64 (assuming you are using Win7), according to me, you need the x 86 redistributable og version for this software. If you already have an earlier version of the redistributable installed, you might as well try to uninstall first and then reinstall Microsoft Download or try to install the BT software after uninstalling. So, you can try to uninstall the BT software and start again.

  If you already have version BT 6.2.1.1400 installed, you should ensure that you have a complete backup since this version had a serious bug when installing/uninstalling this version could wipe you HDD. I know that this is related to the 6.2.1.1400 only.

  -gan

• Problem installing CS5 on macbook pro no CD slot

  Hello

  I have Adobe Creative Suite 5 Design standard bought in France in 2010. It was installed on my Macbook Pro 2010 but I just changed to a MacBook Pro retina Yosemite 10.10.2 and there is no slot to insert a CD. I would like to install the software from the adobe Web site, I registered both by using serial numbers, but I don't know how to download CS5 on my new computer. I already uninstalled Adobe CS5 from my old computer, as I probably only a single permit.

  I would appreciate help!

  CS5 - http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS5: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

  If you do not turn off the product before you uninstalled it you should contact Adobe Support by chat and ask them to reset your activations.  Normally, you get to have two facilities enabled so that you do not have to, but it before install and activate the new installation will facilitate as much as to always have an extra activation available if you wish to have a second facility somewhere.

  Chat support - the link below click the still need help? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat
  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

• How to restrict users to install software on XP pro

  I want to know how to prevent users from installing software on our PC. I watched security policies, but it was not completely clear how to proceed. Where can I find the good ploicy of change?

  can install only Administrator/s.

  configure accounts log no administrator for them

  password protect the admin log - on.

• Problem installing software for all-in-one Deskjet F4210

  Hello.

  I have a problem when you install the software for my HP Deskjet F4210 all-in-One printer.

  First of all:

  • I am running Windows Vista Home Premium x 64.
  • I tried the 3 installation methods:

  (1) installation CD.
  (2) installation of downloadable x 64 Installer.

  (3) installation of downloadable x 32 Installer.

  I get the same error message (series) at each facility.

  I also tried each method of installation mode execution "Run As Administrator". Which is not exactly change the result.

  Just to try, I tried to install it on Windows XP, and it has worked very well with no error message.

  I don't know what the problem is, but I have screenshots with legends and a comment by each (to me) that explain everything.

  * Note: You can click ON the picture to SkyDrive show in its own window.

  Images:

  1) HP Installer screenshot 1

  2) HP Installer screenshot 2

  3) HP Installer screenshot 3

  4) Setup HP 4 screenshot

  If anyone can help, please do.

  I really hope that these screenshots can be useful.

  They are in order of appearance.

  Twitter: @mgarcher007
  
  My rig: HP Pavilion a6645f Special Edition: Verde.
  CPU: AMD Athlon 64 x 2 4850e @ 2.50 GHz
  RAM: 5.00 GB DDR2 800 MHz
  HDD1: 500 GB Seagate Barracuda, 32 MB cache
  HDD2: 1.5 TB Western Digital Caviar Green, 64 MB cache
  Optics 1: HL DVD-RAM
  Perspective 2: Pioneer BD-R/DVD-RW
  Graphics card: Single EVGA GeForce GTX 260 896 MB 448 - bit GDDR3 PCIe 2.0 (Yes, the card just fits, I have only one other device PCIe [a HDMI intensity Pro capture card] and I can't even keep the side panel of the computer, because the card sticks out.) I'm working on a mod for that matter).
  PSU: Ultra x 4 850w modular; SLI and CrossFire ready
  Various: Intensity Pro (HDMI capture card) for the capture of Xbox 360 and PS3 game and making game vids/fixtures.

  Hello

  You use Internet Explorer version 8? If so, uninstall Internet Explorer version 8, and then try reinstalling sw of the printer driver. You can reinstall Internet Explorer version 8 after you have reinstalled successfully the sw of the printer driver.

  

  Kiko

• Problem installing software in FPGA

  Hello

  I bought an FPGA (9074).

  Following the help to get it runing it says I need to install the software using MAX.

  The device was found in MAX, the network configuration works.

  Right click on 'software '? "" remote systems "to add the basic software for operating the unit.

  I only get the first option (OR-RIO 3.1.0 minimal, January 2009), the others are grayed out, so he ends up with not a lot of functions in Labview to develop my program, I have no serial communication or the PID function for example.

  I'm using Labview 8.6.1.

  I have the module 9263 (analog output) and his work very well with the 9074.

  What should I do to be able to install a more complete set of software outside the minimum?

  Sandro

  Problem solved, any new, OR just last installed device driver.

  Thanks for the reply.

• Problems installing software hp after system recovery system

  I just replaced the motherboard due to the failure in an hp g60. I tried using the recovery of the system since the partition and the computer reboots after about 20 seconds in the hp software installation process. Then the system recovery screen would jump upward to want to me again the whole process. After 3 times to do, I did a scan of seatools hard disk and it tested ok. Then I thought that maybe there was a file corrupted on the partition, so I ordered the hp recovery discs. I ran these discs today and I got almost 3 quarters thanks to the installation of the hp software when a screen poped and told him to end the windows session and the computer restarted again. When he started upward, poped system recovery window back up and asked me to do it again. I'm looking for any help/suggestions on this subject. Thank you.

  Hello

  This could be the problem as HP recovery disks check for a "tattoo" on the bios to make sure that the operating system is installed on the machine, that it was intended.  One way to confirm this would be to install an OS on a retail disc - even if you don't activate - just to see if this will load ok.

  Best wishes

  DP - K

• : HP Officejet Pro 8500 A909g Pr: problem installing drivers printer Officejet Pro 8500 A909g

  He is a former printer who has worked for years, but whenever I attach a printer Epson Photo to my PC, use it, unplug it, my HP printer fails. I've always been able to reinstall and it works very well. This time it somehow uninstalled the drivers and when I try to install from the CD of HP, he will not reinstall. I get the yellow triangle on Device Manager and the devices and printers Gino PC. When the installation CD fails, I get a message problem found with your network problem may existwith network printer function. Try to fix the problem then clickretry or click next to continue.

  Rediscovery of detected printer problem. Your PC may not be mean track on the line of your printer status changes.

  If you use firewall software, check port427 UPD is unblocked from your printer to 192.168.1.5 to your pc. To solve this problem try to power your printer market.

  Powerinf the printer does nothing. I have disabled the firewall with no result. The UPD port, I don't know what to do. I tried all the fixes from HP and MS and they show the printer but no miracle car.  Does anyone have any ideas what to do next?

  Thank you E - roq,

  I tried everything you mentionrd sxcept msconfig. It did the trick. My printer prints and reset msconfig... One more question if I can - my printer will work with Windows 10 or do I have to buy a new 8630?

• Problem installing software for a purchased HP2544 today

  Hi all

  I tried to install the software using the CD but I get a blue screen and memory dump came?

  I went to the HP website and downloaded the latest software and drivers for it, 64 - bit Windows 7, but I still get the same error during installation.

  I tried to install this several times tonight.

  Someone at - it ideas?

  Have never had this problem before installing any software in the past.

  Thank you very much

  Rob.

  Hello Robflyer3,

  Welcome to the HP Forums!

  I understand when you are installing the software from the CD or the HP website you receive an image screen blue/memory. I will do my best to help you!

  You connect to this printer wireless or USB?

  I need to know at what time the blue screen occurs during installation? Did you see an error message when this blue screen? If so, please send the code of error on this post.

  I would recommend a running System File Checker by following this Microsoft document here. This utility under Windows that allows users to find corruptions in Windows system files and restore the damaged files.

  I will seek forward at the hearing on your part have a good night!

• problems installing software hp photosmart c5180

  Hello my c5180 and my 64-bit windows 7 will not match

  It wil not install more software hp for printing / scan / copy.

  who can give an idea, s/help

  its starts with fr installation a few minutes later, gone is the installation screen.

  and nothing happens?

  I tried:

  AIO_CDA_Net_Full_Win_WW_130_140

  Thank you

  Hello jvdl,

  Welcome to the Forums!

  I saw your post on the questions you have install your Photosmart C5180 on your Windows 7 computer. I understand the installation will start, and then stop and disappear.

  I would suggest after each step from the document below to hopefully help you to install the software.

  On the Software Installation progress bar stops or crashes

  I hope this helps you!

  Good luck

• Problem installing LR6 on Macbook Pro

  I just installed LR6 and received the following message.  Cannot create the required folder: / Users/Bobywis1979/library/application support/Adobe/Lightroom/develop Presets.  I don't know what to do to fix and install correctly.  Can you help me?

  Try the 6 here

  Troubleshooting Guide for errors that can occur when you change the modules in Lightroom

• CP2025: Problem of software driver CP2025

  Problem installing software:

  Windows 7 (64 bit) on printer and custom pc worked fine. Installed the free download of Windows 10 and the problem started. SSD formatted and reinstalled Windows 7. Not able to install drivers CP2025, tried both original CD and downloads online.

  They would not install that it either I have tried. HP pilot program informed me that the system was not enough and that he would cease installation. What is extremely strange, given that the same pc was operational with printer and installed software.

  Any ideas?

  Just for starters I say I do assign assumptions when I write this while I am away feel free to ignore what I'm saying. Also your printer can not work properly with WIN 10 to what is a possibility as well.

  I'm willing to bet that the driver you download is a universal driver. Repeatedly universal drivers do not work like a PCL5, PCL6 or PS driver would be. In some cases when you go to the section drivers and downloads for your printer on the HP site, you can change the operating system to the different versions. Then you can possibly download an older version. If they are universals so sometimes you can shoot the pcl5 or 6 driver on the installation of the software they offer or on your cd. Open the archive zip 7 and in some cases, you can find a folder of drivers with the pcl5 or 6 drivers available.

  Perhaps few things to try.

• Error 1720 when installing software for usb modem

  Hello

  So I'm having a problem installing software called mobilink for my novatel usb wireless modem, actually it's not mine to someone else.  When installing the software directly from the usb port it will stop and say Error 1720.  He had the same problem with a modem former usb from the same manufacturer, but I managed to download the software directly from the manufacturer's website and installed without problem.  With the recent usb model, they do not offer the software online.  The Windows Installer is updated and saved, is this a problem with windows vista or any associated windows? It seems to happen during the installation of the usb modem.

  Hello

  I suggest to refer to this link and follow the instructions in the link below and check, if this can help:

  http://support.Microsoft.com/kb/2438651/en-us

  It will be useful.

• Problem installing HP Officejet Pro 8600 - OJ860x64.msi

  I have a problem installing the printer, when I am installing the printer disk in my computer, it shows

  "The G:\OJ860x64.msi file is not a valid package for the HP Officejet Pro 8600 database software product. Try to find the OJ860x64.msi installation package in a folder which you can install the software from the HP Officejet Pro 8600 database. »

  I'm trying to uninstall the base software of HP Officejet Pro 8600 it shows the same thing and then I press Cancel and shows

  "The Installation Source for this product is not available. Make sure that the source exists and you have access. »

  Someone knows how to fix this? How to uninstall the software?

  I tried to download the driver and it still shows the same thing with the driver downloaded from the HP website.

  This looks like a problem with Windows Installer. Go to the Microsoft website and search

  "The problems with programs that cannot be installed or uninstalled" and you should get an automated fix program.