Problem of the iMac 27 inches 5K after upgrading the RAM?

Similar Questions

• 120 all-in-One desire: analysis of the problems with envy 120 all-in-One after upgrading to Mac OS 10.12 (Sierra)?

  Hello world

  My operating system is Mac OS Sierra 10.12, but the drop of HP does not include yet - that's why the "other" operating system.

  I just upgraded my Mac to 10.12 Sierra, and I've also updated software from my desire to 120. I have also reinstalled the HP utility software on my Mac. And Yes, I restarted my Mac several times too.

  Now, the challenges:

  1 120 feel like in his screen it does not find my computer when I try to scan to the computer. As if he cannot see it, even if the two computers and 120 are on the same network. This problem is new and was held just after the upgrade from Mac OS.

  2. Furthermore, when I try to activate the scan on my Mac computer, an error message appears telling me to update my software HP (see screenshot), although I've done.

  If someone had the same problem, and if you have, how you go about it?

  Thank you.

  

  Hello

  HP software full functionality is not yet available for Sierra, as you mentioned the ysstem functioning is not yet.

  You can scan with the application of ICA Apple (Image Capture or sweepers & Scanners), as well as thorugh HP Easy Scan you will experience, however, some issues you described, as this behavior with the scanning of the façade, this is a known issue with the software that should be fully updated for Sierra soon, it should be available soon, assuming that during the next weeks to come...

  You can insall HP Easy Scan 1.6.1 below and check if you are able to scan from it:

  Note: If there is already a HP Easy Scan of a previous version icon in the Applications folder, remove and empty the tash first.

  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/installations/Essentials/HP-easy-scan-1_6_1.pkg

  Then, try to scan using HP Easy Scan and check if it works.

  If the front panel can now list your Mac, it probably, work if not to use the Scan on your Mac software for now.

  Kind regards

  Shloi

• Latitude E5500 Intel GMA pixels problem after upgrade of RAM > 4 GB

  Hello, I use latitude e5500 with the following specifications:

  • Processor: intel core 2 duo
  • graphic: Intel GMA 4500 MHD
  • OS: Windows 7 SP1 64-bit
  • RAM: 6 GB (2 + 4) 800 MHz

  Recently I have upgraded RAM of 4 GB (2 + 2) 6 GB (2 + 4). They are of the same manufacturer, the two 800 MHz I checked the new memory with the Dell diagnostics - it's ok. After upgrade, I have a serious graphics - parts of my get pixelated screen problems. It is irregularly, with different applications ran - see the screenshot.

  I tried to uninstall the graphics driver - it's ok, but I'm not ;) mode 640 x 480 I have tried different drivers - no improvement. Also, I removed a 2 GB - it works very well with my new 4GBs

  

  Hello

  Yes, I solved the problem. I had to buy an another 4 GB from the same manufacturer with the same properties. With 4 GB + 4 GB, it works perfectly.

  Concerning

  Aleksander

• Problems of network of phones smart blackBerry after upgrade

  After upgrade today, my entire calendar disappeared... and google sync fails!... says connection failed due to network problems, check your settings... Don't know what that means...

  Any ideas? THX

  I also got an error that there in no browser configuration. and to contact my provider... what the hell?

  1 restore your calendar with Desktop Manager > Backup/Restore > advanced. Search your backup file "loader" most recent ending by ".ipd" and restore the database calendar.

  2. for the browser and other connection issues:

  Options > Advanced > host Routing Table > Menu > register.

  If still nothing... send your books to your BIS service provider site.
  http://www.BlackBerryFAQ.com/index.php/Where_can_I_log_into_my_BIS_account%3F

  And finally, as always, with the BlackBerry device switched on, disconnect the battery a few seconds and then reinsert the battery to restart

• HP ProBook 450 G0: Problems of HP ProBook G0 450 icons after upgrade to Windows 10

  Hello

  2 days ago that I have upgraded to Windows 10 my HP ProBook 450 G0.

  Then I realized my graphics drivers are not working, I tried to update to the last registered in the section to download the drivers for my model.

  After that, I got BSOD and couldn't even see login screen. I removed the update installed in safe mode.

  If at the moment I use some default driver I guess.

  In the Device Manager on Intel(r) HD Graphics 4000 I something like (manual translation) "Windows has stopped this device because of disorders raported. (Code 43) ».

  I can't use the HDMI & display internal. To use the HDMI, I have to restart my PC. After using HDMI, I can't use internal display. A lot of questions, because this driver...

  I really need this, as I am a teacher and I ', using both internal display & HDMI for presentations...

  All solutions? All the newspapers that I can get to help you help me ?

  Kind regards

  Jakub Krol.

  Hello

  In case anyone is interested, my PC is now fixed

  More information: https://windowsforum.com/threads/graphics-issues-after-upgrade-to-windows-10-system_service_exception-sgfxk64-sys.220205/page-2 .

  Kind regards

  JK.

• 13 - a071ng: problems with the RAM upgrade - where is the crack?

  Hey there,

  so today I got my new x 360 a071ng HP. I wanted to upgrade my RAM from the standard 4GBs to 8GBs and replace the HDD with a SSD.

  Replace the HARD drive has been frank and I have not encountered any problems. But there is a problem: I can't find the slot of the RAM.

  The HP website is not saying something about a RAM memory that can be removed and nor does the Crucial site that actually says that there are two available slots.

  -Is anyone can help me? Is it hidden somewhere? Perhaps under the motherboard or the battery? Or is the site condition information simply false and there is no way to upgrade the RAM?

  Best of the Austria,

  Jannis

  Here is the Manual:

  Manual

  See Page 49. Memory access requires the removal of the motherboard I hate to say but if you on the hard drive, you were close. Just pay attention that HP will not honor the warranty if you damage the laptop in the process. Good luck and post if you have any other questions.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Problem with the ram upgrade.

  

  I have a laptop DV4-5100 and I received the new ram for it, but there is no way for me access to the ram compartment, apparently there is no screws or anything to open. So exactly how am I suppose to upgrade ram?

  You should be able to drag the yellow locks for the compartments and remove the panels.

• Satellite L30 - frequent BSoD after upgrade of RAM.

  This problem is almost identical to [this post | http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=144540𣒜], but given that the response was too general and did not help, I want to provide more details about my problem and hope for a better answer.

  My L35 (i.e. American L30) came with Vista Home Basic and only 512M of RAM. It was slow, but smooth otherwise. The problems started after I upgraded the RAM to 2 GB occasionally a BSoD will appear, and the computer restarts after a second or two.
  Most of the time, instances of BSoD are not taken at random; usually, it happens when you watch a film or multimedia and online during the wake her up after suspend.
  Also, it happens much more frequently if an external monitor is attached. He does, connect an external monitor and watch a movie will result in BSoD with 100% certainty. My laptop has shared video memory, maybe it's a question here.

  The problem prevailed after that I installed Windows 7.
  Memtest86 + showed no problems with my memory
  Memtest86 covers all aspects of the use of the RAM?

  Is it possible that some problems may be overlooked by memtest86?
  Are there other tests of memory, that I could use, specifically to test the shared video memory?

  Not every hardware problem can be detected software.
  You have tested the RAM with Memtest86 +? Try using Memtest86 (no +).

  In the worst case, you must replace the RAM. Ask the dealer for a new computer. I m sure they will help you.

• Problems with two of my OPOS hardware after upgrade from XP to 7

  I have two HP rp5000 point of sale systems and I'm having a difficult time linking two of my OPOS hardware components.  My receipt printer, A794, even after installing the new drivers still is not recognized by the computer.  The other thing that doesn't connect also the HP Pole display, I think that it's an LD220.  I recently updated the OS from XP to 7 and that's when I had the problem with my computer, try to recognize them.  The pole display is USB and the USB printer to series.  Is there any firmware for the latter to try to make them work again?  I have download the firmware for the Pole display, but that didn't work either.  I don't think I saw one for the printer.   Any help would be useful.  Thank you.

  Npgwi2000, welcome to the forum.

  I'm sorry you have to do another post, but this is the Forum for the POS systems.  Experts it will be able to help with your problems.

• Anyone had problem with access to their musical application after upgrade to 9.2.1?

  I upgraded my IPhone 6-9.2.1 - and again, I am sorry that I have improved - lol!

  I am not always able to access my music app now... after pressing the music icon, I get a picture of a lady standing with headphones - can not access my music.

  Someone else has the same problem and if so, were you able to solve?

  Thank you-

  I can access my music, but it crashes after a few moments and let me only access to some songs. Also sync with itunes is broken.

• HP Deskjet 6122: Problems printing to my HP Deskjet 6122 after upgrade to Windows 10

  Hello

  I used the above printer on Windows 7 OS by downloading the driver for the HP Deskjet 990c printer and it worked well.

  After that I had upgraded to Windows 10, I wasn't able to find the printer printer & devices on the list.

  The icon appears very much (like HP990c), but when I try to print, it is just straight up with an error message.

  The ironic part is that I have a 1220C HPDekjet, who is an older printer, and which has been added successfully as a new printer and prints well.

  Optionally you can give guidance will be highly appreciated.

  Hello

  I'm afraid that the HP Deskjet 6122 is inompatible with Windows 10, it is no longer supported on Windows 8 or any later operating system.

  You can find this information below:

  http://support.HP.com/us-en/document/c04658195

  Kind regards

  Shlomi

• Split HP 13 x 2 PC: problem of its HP Split x 2 after upgrading to win 10

  I upgraded my laptop to Win 8.1 to 10 .but I have a sound problem... sometimes I can't see the videos on Youtube, facebook... If I start a video from the video stucks and a start-up sound comes... .but the problem will automatically and back again... .This ih happening since I upgraded my laptop to win 10? is there a permanent solution

  Hey @Rdx12311,

  What happened with the troubleshooting and resetting the BIOS?

  Thank you.

• Charging problem battery blackBerry Smartphones BB Curve 8520 after upgrade to OS 5.0 Bundle 1682

  I just upgraded my BB Curve 8520 OS 5.0 Bundle 1682 of the Bundle 5.0 1096 and now I can´t for free my phone to my PC via USB cable, no matter what, even if I run the BB Desktop Software. Also, when I'm "wall-load" my phone, the icon representing a regular Flash on battery is completely default, asi if she required, although it is, I see the upcoming bar upward and obviously because I use my phone. Could someone help me with this problem? Thank you!

  You are using a theme? Some show no battery charge status...

• I have a problem with the RAM

  I was having 2 GB of ram, after I added more than 2 GB, but windows use 2.94 GB what can I do to use all the memory? I have Windows 8 Pro x 64 bit (sorry for my English)

  Hello NicusorStoian,

  As I understand it, you initially have 2 GB of RAM then you added another 2 GB of RAM. Currently, you have a total of 4 GB of RAM. Your computer is currently using 2.94 RAM (more or less) of 4 GB. However, your question should be the opposite, don't use any memory because if the use of RAM reached the highest usage, you can expect your computer to delay or slow but if you want to try to use all available memory, simply open programs as much as you want

  Hope this helps ;)

• Problem w DVD Eject on Studio 1558 after upgrade Win10

  I have a Studio 1558 that I upgraded to win 10 of Win 7.  (Now I see that this machine never has been tested for Win10... sigh)   I put a DVD in the machine last night to watch a video educational and found that I can't eject the media.  The key on the keyboard does nothing when you press.  Strangely, the DVD has no autorun and it took me some time to discover the new Windows player.  Anyone has any ideas on how to get my DVD out of the short a machine physically dismantling of the device?

  Thank you very much.  I forgot that one!