Problem starting on my Satellite L50-B-1DZ

Similar Questions

• Sizes of screws for Toshiba Satellite L50-B-1DZ

  Does anyone know the sizes of screws for the base from a Toshiba Satellite L50-B-1DZ? I got one to fix, but half the screws are missing.

  As far as I know that here is m2, 5 × 6 .0b LINKING PLATE screws

• Upgrading RAM on Satellite L50-B-1DZ - need advice

  Hello

  I want to improve my new laptop to use 8 GB to 4 GB. The site of the main product specification provides all the information, I need to know if I should order DIMM or SODIMM memory modules?

  Also, is it possible for a client to easily make this themselvess by removing the panels without having to take the thing completely detached?

  http://www.Toshiba.co.UK/laptops/satellite/l50-b/satellite-l50-b-1DZ/

  standard: 4 096 (1 x) MB, RAM DDR3L (1 333 MHz)
  maximum extension: 8 192 MB
  technology: DDR3L (1 333 MHz) RAM

  Appropriate advice or technical manual covering this would be great.
  The on their site are too "basic" user guides

  Kind regards

  Peter B, UK

  Well, the procedure for the RAM upgrade is a bit tricky. There is no RAM module Bay separated with easy access.

  To access the free RAM slot, the plastic cover of the bottom must be removed.
  You need to remove the ODD (optical disc) as well as the battery and next by the screws around the cover.

  But remove the cover would mean that you would negate the warranty.

  I put t know if you want to lose the warranty, I think that security is a very important fact which should be considered before performing this upgrade procedure.

• My Satellite L50-B-1DZ does not start

  I had my computer toshiba laptop for about 8 and a half months and has worked flawlessly with the only problem being that I couldn't connect to the store windows for a month. (It is now resolved). I went to turn on my computer and it was working fine until suddenly the screen turned white and he died immediately.

  To my knowledge, I had more than half the life of the battery on the left, but I tried to load it is in any case, as I suspected that it was maybe dead. When I hold the Start button, it will do nothing, but flash a few times until stop. I don't think it is heated while I was only on it for 5 minutes. I have not damaged it in any way for example. Spill drinks top etc. I am very confused.

  Help, please!

  What happen exactly when you press the power button / stop?
  You don't see anything on the screen?

• Problems starting with the Satellite C870D - 11 X

  I have a Satellite C870D - 11 X 8.1 Windows running.

  The laptop was running progressively slower, but now when I start it sticks on the screen "Toshiba Leading Innovation". Finally, he moves to a blue screen saying that your computer needs repair "a required device cannot be accessed 0000185 0xc error code. I tried a reset by pressing '0' at the beginning, to the top and I see the process of disk recovery hard screen and press enter for Yes and I get the "Toshiba Leading innovation" screen with please wait. After the circular points are displayed for a few moments, then the screen becomes white.

  Unfortunately, I don't have a recovery disk to try this option. I'm looking at a hard drive failure? I hear a feint clicking of the HD as if hunting for something.

  If I buy a disc is it likely that I will be able to reinstall using this media?
  Thanks a lot for your suggestions.

  At first, I must say that you have made a mistake after that you bought your laptop you didn t create disk recovery or the so-called recovery media with the original version of Windows 8 that you got with your machine.
  I really do not understand why so many people make this mistake and do not create bootable recovery media installation backup image recovery.

  In any case, on this path virtual that is not easy to say what the problem is here and, in my opinion, the better you can do is to back up all your important data and install original recovery image. After doing this, you can test the functionality with the factory settings.

  A few days ago, I found interesting options paper of recovery limited after update to Win8.1 - http://aps2.toshiba-tro.de/kb0/TSB4403L30001R01.htm
  You should try to install the HARD drive recovery original anyway. How is it that you can read on http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm or http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm (Win8/8.1).
  Order recovery media can be your last step.

  Clicking noise could be sign of drive HARD doesn't work well anymore. Is the warranty for your machine still valid?

• Problem starting on several Satellite C50 - C70 models

  The members of the forum and Toshiba, Hello

  Recently, I sold several laptop Toshiba Satellite C50-70 and Satellite Pro series.

  With most of them, I knew starting problems.
  When turn on/off the laptop, I see the Toshiba Logo and then nothing happens.
  I have to turn it on and turn it on again so he can start on Windows. (7 or 8.1)

  Sometimes, I have to power OFF / ON several times.

  What I see is that the NumLock light does nothing. If the system starts, I see this LED flashes on / off 2 times. So, I can see on forehand if the laptop to boot Windows or hangs at the Toshiba Logo.

  Anyone having the same problems?

  I put t know if anyone has had this problem but I guess that if the books are new and covered under the Toshiba warranty, you must contact the maintainer authorized Toshiba in your country to check the material part.

  The Toshiba start screen freeze means that the POST (power on self-test) could not be transmitted correctly and it is especially a sign of hardware malfunction.

• Problems starting with the Satellite A100-662

  Hello

  I appeal to your jurisdiction after a first contact with the Toshiba support on the phone.
  My problem is the following: your computer Satellite A100-662 begins at random, sometimes it starts the first time, and other times it starts only partially sighted power and ignition in market, drive hard s ' lighter than 1 second, the fan runs but the screen remains black.
  To start, I tried several things, I had read on the Internet: removed / delivered the battery; power supply only. removed / delivered the same RAM and hard drive.
  The Toshiba support me make an initialization of food and a BIOS upgrade. I also set the fan but no improvement!
  Because I noticed something by chance: the computer does not start, I tapped on the lower right corner of the computer, and it started but not on the screen. I turned off the computer, and then I'm turned again... He has started!
  What do you think?

  Thank you.

  Hey Buddy,

  first of all: THIS IS a USER FORUM

  That means, Toshiba bed tie this messages or give any kind of support. So, please Don t think that one of Toshiba will call you the next day and give you press your problem. Be prepared to discuss with other users to solve your problem and get some knowledge from other users here autour.

  Regarding your problem:

  I think you have some hardware problem that must be fixed by a partner certified. I guess that an electronic part of the motherboard of your computer does not work correctly and from causes of this boot.

  In your case, I would follow this [LINK: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_whitepaper.jsp?service=EU&WHITEPAPER_ID=0 000000871], find the nearest authorized service partner in your country and ask them a health check of material.

  That's all, good luck...

  Welcome them

• Satellite L50-B-1DZ - wireless network adapter does not work

  So, my network wireless adapter completely stopped working. 2 days ago I couldn't connect to networks wirelessly without problem (although I've disconnected and will need to run the troubleshooter every few hours to reset it...), but yesterday I started to get the message "not connected - no connection is available. In broadcom 802.11n network adapter in Device Manager, the icon has a yellow warning symbol and the error message "this device cannot start. Code 10 ".

  I tried to update the drivers, but it gives just the same error message. I also tried to do a restore of the system since a week ago, but it has not fixed either.

  I found a youtube video that said that the problem can be caused by a software conflict and change value from registry, but that no longer works, and now I'm full of ideas.

  How have you tried to update the driver WLan?
  Have you tried to uninstall the driver first, and then after reboot again to install the new driver downloaded from Toshiba UE driver page?

  Try it!

  You said you reset the system in the past?
  How? Have you used the Toshiba recovery procedure and have you installed already preinstalled system once more?

• Problem starting with the Satellite A500-134

  Hi guys

  My laptop is a few years and two months back, the battery has just stopped charging (death), but because of the work schedule, I didn't get time to replace.

  In any case, I was working on a report and took a 20-minute break and when I came back the laptop was turned off by itself and that a single led white light for the AC adapter was.

  When I pressed the power button the camera and light led light power which ends of the AC adapter / light turned on and at the end a dry stop the laptop with the power and the orange light battery light on. Orange light battery led was off after 6-8 sec.

  I tried again and again and the same thing is happening

  Can someone please tell me what is the problem that I really need to finish this report and I am lost.

  Thank you in advance for all your backup stream.

  Try resetting your laptop. Unplug the power plug, remove the battery and press the power button for 20 seconds. After leaving it for a while, only connect the power supply and try to start your laptop.

  What happens when you do this?

• I can't start up by Satellite L50 - B - 27 p

  First of all sorry for my English

  My battery is charging - I'm sure my battery lamb being white.

  After that I pass on the power button, nothing happens. (as free)

  I hope you could understand me... Ty for help.

  I don't know what model of laptop you have exactly, but in most cases, this short workaround might be useful to solve the problems of starting time:

  Remove the AC adapter and the battery.
  Power button press and hold long 30-60 sec
  Now connect the battery and the AC adapter and try turning on the device...

  Your comments would be appreciated as well as information on the laptop model.

• Is compatible with Windows 10 Satellite L50-B-1DZ?

  I received the notification windows 10 on my laptop but when I try to book a copy it tells me that my processor is not supported! This laptop is less than a year and came with pre-installed Windows 8.1... Surely this cant be the TOSHIBA case?

  Hello

  Check to see if your model is listed on http://win10upgrade.toshiba.com/swup...spx?region=TEG

• Satellite L50 - A - 16 Q - problems after upgrade to 8.1 windows

  Hi all

  I have a problem with my Toshiba Satellite L50 - A - 16 Q.

  I decided to update my laptop to Windows 8.1 Win8, unfortunately, it was really bad decision.
  After that my computer is very slow. It takes forever to push the power button to be ready to use browser. Even Chrome does not work correctly. Before the update, my computer was big, fast and stable.

  Is there anyone who had simillar problem? Is it possible to go back to Windows 8 without destroying my C: drive?
  Maybe I should install something more?
  All drivers or another update?

  I just install Win 8.1 update and nvidia drivers graphics.

  Hello

  To be honest, I put t understand the decision to return to Win 8.
  Win 8 contained many bugs that have been fixed with Win 8.1

  Two days ago, I upgraded my new Satellite M50 - A Win Win 8 to 8.1.
  It took some time but finally win 8.1 run on my laptop and its great!

  First of all, you must update the 8 8.1 Win win recommendation of Toshiba:
  Details:
  http://www.Toshiba.EU/innovation/generic/windows8_1-message/
  All Toshiba drivers, utility tools must be updated!

  With regard to the starting time:
  You know the hybrid mode? Default (Win 8) did not stop you probably know other systems like Win 7 offshore. The 8 winning performed the closed hybrid that allows you to boot up the laptop faster. But this has been closed not real mode.

  Here is a good description how toggle this mode:
  http://APS2.toshiba-tro.de/KB0/TSB2B03EY0002R01.htm

• Satellite L50 - B - 16 Q - downclock Windows 10 CPU

  Hello world. A few weeks ago I found the problem with my laptop Satellite l50 - b - 16 q. When I use the laptop all right, after sleep/wake up the processor is clocked at 0.8 Ghz isn't serious battery, battery/AC (power saver) balanced mode. Sometimes when the battery is less than 10% (no matter the battery/AC) the CPU count is 0.1 Ghz. After several reboots and the problem of sleep/wake are fixed. Processor is Intel Core i7 4500U.
  It is clean instalation Pro 10, 64-bit Windows. I have worked with before Windows 8.1 and I have no problem.

  I have another problem. When the laptop's power over the time fan speed is max. I cleaned it dust, change of thermal paste and the CPU temperature is 50-65 ° C, but GPU more than 90 ch. video drivers is updated and Windows with latest updates. Any ideas?

  Originally posted by Papercut
  

  Hello world. A few weeks ago I found the problem with my laptop Satellite l50 - b - 16 q. When I use the laptop all right, after sleep/wake up the processor is clocked at 0.8 Ghz isn't serious battery, battery/AC (power saver) balanced mode. Sometimes when the battery is less than 10% (no matter the battery/AC) the CPU count is 0.1 Ghz. After several reboots and the problem of sleep/wake are fixed. Processor is Intel Core i7 4500U.
  It is clean instalation Pro 10, 64-bit Windows. I have worked with before Windows 8.1 and I have no problem.

  I have another problem. When the laptop's power over the time fan speed is max. I cleaned it dust, change of thermal paste and the CPU temperature is 50-65 ° C, but GPU more than 90 ch. video drivers is updated and Windows with latest updates. Any ideas?

  its gpu is overheating and acceleration prevents your cpu load and speed, have you changed termo glue on video chip you?

• Satellite L50-B-177 - after upgrading the BIOS can not use the Polish symbols

  Hi, I'm newbie here. This is my first post, so sorry for the plain text.

  I have a problem with the laptop Satellite L50-B-177 1 month of my wife. After update BIOS (from Toshiba Service Station) to version 1.70 I have this problem: it is impossible to use symbols of Polish that comes with ALT + z, ALT + x, ALT + c. other - ALT + a - works normally.

  Problem is the operating system independent (even on the live session of Ubuntu). I understand that this is a specific problem for the location of the Poles, but causes cell useless for my wife (she is a teacher and write a lot of text). As much as I know BIOS downgrade is not available for customers, and the weeks of waiting for the new package of BIOS is out of the question.

  Any suggestions will be appreciated.

  Hello

  This problem occurred imadiately after updating the BIOS?

  Have you tried to set the BIOS settings by default once the update is complete?
  If this isn't it.

  Also, check if the Polish keyboard language was chosen correctly and as a default value.

  Comments are greatly appreciated.

• Problem starting Satellite L50-A1001

  installation of the windows computer laptop Satellite L50-A1001 button?

  installation of the windows computer laptop Satellite L50-a1001 button