problem to connect my acer z160 and my toyota

Similar Questions

• Problems of connectivity windows 7, conflict and the IP configuration errors

  I have an Asus computer with windows 7 installed. My internet provider is verizon fios, and this problem does occur at home with my computer. Other computers or devices work fine on the network. I get a message that says: there is an IP address conflict. I rest and renewed my IP address through cmd with no luck. I found that if I troubleshoot the network by clicking on the red x, recover the wireless connect 2 and it will work for a period of beginning of disconnect and reconnect. I'll try to diagnose the problem to get the error message of 2 wireless connection doesn't have a valid configuration. I tried everything in the forums for weeks without success. Cmd prompts including changing DNS, Hello settings, but nothing has worked.

  Hi Nick,

  Try setting power off all computers or devices connected to Wi - Fi in your home except your computer and check.

  This error message indicates that another computer on the network using the same IP address that your computer uses. Follow the suggestion of this Microsoft article and check if it helps.

  Get help with the message "There is an IP address conflict"

  http://Windows.Microsoft.com/en-us/Windows/get-help-IP-address-conflict#1TC=Windows-7

  I hope this helps.

• I have a Palm Z22. It won't hotsync. It tries to connect, but then "problem, the connection between your device and the desktop could not be established. Please check your configuration and try again. »

  null

  Chillie wrote:
  Sorry I put my question in the wrong place.  I use Windows XP.  My Palm is a Z22.  I restarted my computer, if that's what you mean by a soft reset.  I have no answers-don't know my hot Sync Manager.

  A soft reset is performed on your computer Z22.  Look for the small "Reset" button on the back of the unit and press it with the tip of your pen or a paperclip.

  Reset draw your Palm.  Try to HotSync again.

  HotSync Manager is what your computer to connect to the computer Z22.  Do you see the HotSync icon in the lower tool bar?  If this isn't the case, you can not connect.  Go here:

  Start Manager button / all programs/Palm/HotSync.  This selection must load the HotSync Manager.

  I would help you with HotSync Manager, but you neglected to answer my question on "What version of Palm Desktop?"

  WyreNut

• I have problems wireless on my Acer laptop which has Windows Vista. I am able to connect to my school of university network and used to connect to my home network.

  original title: Wireless on the Fritz

  I have problems wireless on my Acer laptop which has Windows Vista.  I am able to connect to my school of university network and used to connect to my home network (both are networks limited requiring a password or log in).  However, last week my computer stopped connecting to my home network (no one else has this problem with the home network).  I tried to fix the problem, but my computer says that "Wireless association failed because Windows did not receive response from the access point or wireless router."  That said also thatthe connection "(my wireless network)" has been cancelled.  This is perhaps due to a timeout or user action. »

  The only different thing I did last week was click option at my University 'connect long-term' instead of 'connect short term' to their wireless network.  Maybe who has messed up my settings?  That's what my University said of his record long term: "students, faculty and staff also have an option to easily record their computer (or other wireless devices), so that it is not necessary to authenticate each day they connect from the network wireless campus, to resources outside the University.»  However, these settings are saved on their network (I can access it online from another computer), so I think it is unlikely that he messed up my settings.

  I don't really know what the problem is.  Any ideas as to what I can do?  I don't want to reset my computer everything.

  Thank you!

  Hello

  You can view these methods:

  Method 1:

  I suggest you to disable any program of security on your computer and check if it solves the problem.

  After reviewing the question you must reactivate the security on your computer program.
  Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.
  Method 2:
  I suggest also allows you to check in SafeMode with network.
  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
  Method 3:
  I also suggest you to check the settings of the router firewall.

• HP Color LaserJet M277n MFP: HP Color LaserJet MFP M277n, no problems with scan to folder network and internet connection.

  I just bought a 277n MFP which I am running wireless. I have problems with:

  1 - the printer is connected to the internet (no problem connecting to the network and printing)

  2 - definition of networks for scanning file (this is how this problem started because I tried to update the firmware)

  1.

  Searched the forum and found some good articles. Tried to restart and change the DNS as shown without success. Other means?

  2. follow-up guide how to set up an SMB shared folder, but without success.

  I shared "\\Johans-MacBook-Pro\users\johan\documents" under OSX and did the same thing in the printer web setup. Even tried with the entrance of my user name and password. When I press 'save and test' I don't have that "the test failed. Try again. »
  Any suggestions?

  Best regards

  Johan

  Hi @Johan84,

  You can use DHCP or an IP fixed, but you will need to set the DNS.

  Disable the IPv6 setting on the printer.

  Go to the printer settings.

  Configuration of the network.

  Network services.

  IPv6.

  Turn the power off.

  These steps should help with scanning to email.

  Let me know. Thank you.

• having problem to connect with itunes and update my iphone

  I have problem to connect with itunes and update my iphone. Everyone that nows how to fix this?

  What do you mean by communicating with itunes?

  In any case, ask in the Forums of Apple:
  https://discussions.Apple.com/index.jspa

• Whenever I try to open my hotmail calendar this message: there is a problem connecting to Hotmail calendar now. Please make sure that you are connected to the Internet and try again.

  Hotmail calendar error

  Whenever I try to open my hotmail calendar this message appears

  connection error

  There is a problem connecting to Hotmail calendar now. Please make sure that you are connected to the Internet and try again.

  For sure, I understand what his average, but it's weird because when I open it, I'll be online.

  Thank you for visiting the Microsoft Answers site.

   
  The question you have posted is related to Windows Live Hotmail and would be better suited to the Windows Live community. Please visit the link below to find a community that will support what ask you:
   
  http://windowslivehelp.com/product.aspx?ProductID=1

• CISCO RVO42 problems to connect to Internet and continues to give up internet connection

  I just bought for a new router in WAN VPN Cisco RV042 Duan (Small Business Series) Firmware version 4.0.08 - tm (released January 14, 2011). 1 WAN is configured to obtain an IP automatically add and 2 WAN is TRP with the username and password provided by our ISP. The two WAN configured for load balancing mode (auto). State of two WAN is connected, but most of the time only adds WAN 1 shows the WAN IP, DNS, etc. While WAN 2 Add sometimes shows WAN IP, DNS, etc, but most of the time 2 WAN is equal to zero all the. When this happened, I click on connect and sometimes it worked, but most of the time he cut it on the connection and everything will go back to zeros.

  1 WAN works too, but most of the time he gave up the connection to the ISP. I continue to live lost internet connection.

  I don't know what the problem is with my setups, the firmware or the router. Attached are snapshots of the basic configuration of the router.

  I'm disappointed because I thought when I bought this router that it can provide me with a more stable connection but after three days of usage, I have more difficulty to connect to the internet and my boss scolded me already. Help, please!

  

  

  

  

  Hello Gary,.

  My name is David Aguilar, and I'm a support with Cisco Small Business Support Center Engineer. Sorry you are having these problems. Several things:

  First of all, you will want to upgrade to the latest version of the firmware (version 4.1.1.01). It can be found here: http://www.cisco.com/cisco/software/release.html?mdfid=282414010&softwareid=282465789&release=4.1.1.01&relind=AVAILABLE&rellifecycle=&reltype=latest

  Second, if you use both WAN interfaces, you will need enable HTTPS protocol binding. If (encrypted) HTTPS traffic is distributed between the two WAN interfaces, it can cause instability when you browse to secure Web sites. To avoid this, you must direct all HTTPS traffic on a specific interface.

  To do this, go to system management > Dual WAN and select HTTPS as the service. Enter your LAN range as the IP source address and the 0.0.0.0 - 255.255.255.255 as the address IP of Destination. Simply bind HTTPS to the WAN 1 or 2 WAN.

  You can refer to the following screenshot:

  

  If you still have questions, please call us at the 1-866-606-1866. We are open 24/7 and would be happy to help you.

• I get errors certificate on the websites I visit. How will I know if my connection has been intercepted and how can I fix this problem if it has?

  I get errors certificate on the websites I visit. How will I know if my connection has been intercepted and how can I fix this problem if it has?

  Check your date and time system and make sure that they are correct.

  Update your Windows.

• Im having problems to connect my helmet at the entrance in front of my laptop, and I can't use my microphone, which says that the "device" is not connected.

  Hi im having problems to connect my helmet at the entrance in front of my laptop, and I can't use my microphone, which says that the "device" is not connected. What should I do? Thank you

  Hello

   
  1. have you checked the problem by plugging the headset to another computer?
  2. it worked before?
  3. What are you talking about ""device"is not connected?
   
   
   
  I suggest you to connect to another computer and check.
  Also check if the device is compatible with Windows 7.
  Reference:
  Windows 7 Compatibility Center
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/
  If it's compatible, perform the methods below
  If it is not compatible, see the following articles:
   
   
   
   
  What is program compatibility?
  http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility
  
  Make older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
   
   
   
  Method 1: Run the audio Troubleshooter and see if it helps.
  Open the audio playback troubleshooting utility
  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter
   
   
   
  Method 2:
  Run the Fixit described in the article and perform the steps:
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
  See also:
   
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems
   
   
   
   
  I hope this helps.

• Hello, I have problems with Creative Cloud Packager. I bought this product yesterday and since then I can not download completely all components. 59% or 65% of the download I get the message: "connect to the internet and try again." I am connected to Inte

  Hello, I have problems with Creative Cloud Packager. I bought this product yesterday and since then I can not download completely all components. 59% or 65% of the download I get the message: "connect to the internet and try again." I am connected to the internet through Ethernet, I checked my connections through various steps recommended buy Adobe to see if my connection is correct and he is!, so why I can't complete the download process. I feel frustrated because I have clients awaiting results of my work that I can do right now. I have read all the information on the Adobe pages but nothing shows that can help solve my problem also the way things are described sometimes seem complicated and exotic as; not everything I understand particularly when it comes to some technical descriptions or abbreviations. I would be grateful someone help and advice on this topic. Thank you Nina

  Hi Nina,

  This link might help: cloud creative activation and troubleshooting of sign-in

  Kind regards

  Sheena

• Bought LR6 DVD but the installer does not connect to the internet for I can register it.  I downloaded the trial version to work around this problem, but I can't get the program to start.  I get the same message that I should connect to the internet and c

  Purchase DVD LR6 Adorama, but Setup does not connect to the internet so that I can record.  Internet works fine.   I have Adobe account.

  I went to Safari to Chrome and downloaded the trial version in the hope to bypass the DVD version, but I can't get the program to start.    I get the same message that I should connect to the internet and connect.  It seems impossible after 3 hours.  Spent an hour chatting with the support of the India.

  Also remove the cookie file and reg Lightroom then enter the serial number and check.

  Windows:

  Press Windows button (located between Ctrl and Alt buttons) with the key R together at once, you will get a command window.

  Type below command and press the enter"" key.

  programdata %

  It will open the ProgramData folder. inside locate Adobe folder.

  Go to Adobe > Lightroom.

  Open Lightroom and delete all the files inside,

  Then run LR 6 and enter the serial number,

  Mac:

  (1) right-click on the icon in the Finder, then select the 'Go - To Folder' option.
  (2) you will get a text box, type in the following command and then press the 'return '. (" Do not miss ~ symbol" "')

  ~/Library

  It will open the folder of the user's library.

  (3) then navigate to Application Support > Adobe > Lightroom.

  Open Lightroom and delete all the files inside,

  Then run LR 6 and enter the serial number,

• Problem of liquid E700 Acer when the music is playing in the car

  Whenever I connect my acer e700 to my car to listen to music in the car, the music seems to stop, then I manually play it again, then it stops again. So I went back to the phone and got a replacement and hope that the problem would be resolved, but the same thing happened (Im using the pre-installed music btw player)

  At first, I thought it was my power cord (connecting the phone to the car) for pla music, but the problem is not the power cord because my old samsung y duos plays music in the car without stopping or problems at all.

  I also tried to download a free music player (AUDIO STREAM), it seemed to diminish stop the music but a few songs always stop when is played in the car.

  Any thoughts on why this is happening? My opinion is that this phone, the Acer Liquid E700, (I mean all of it) is partly defective and cannot play music hen plugged the car wihtout stop smoothly.

  I bought the E700 liquid Acer a few days ago. And I had the same problem. On Spotifu, the music just stops after a short time I was playing in the car, connect my phone via a cable to the stereo in my car.

  I found a workaround to the problem. It seems it has something to do with DTS, which must be introduced in Middle > DTS Studio Sound. When you turn off this setting the music no longer stops. When you do not want that it turned on, do not set the volume of your phone up, but around 70 percent level. You can then increase the volume of your car stereo to adjust.

  It is not a solution to the problem, but it is at least a workaround until Acer solves this problem.

  I hope this helps.

  Dan

• Unable to connect to other PC and installed protocols are empty

  Original title: serious problems of networking on Vista w / Atheros AR5007EG wireless card

  Hello

  I have a laptop Acer Extenza 5620ZG running Windows Vista 32-bit and have serious problems of networking. In this laptop's wireless card is an Atheros AR5007EG. I can not even find a site that has a list of drivers, or a lot of information about this card other than message board posts from people having problems. The current driver that I use is the most up-to-date downloaded via Windows update. The wireless card works fine as well as to connect to my router to get on the internet, but there are several other problems.

  When I go to my properties of wireless cards and click "sharing" it tells me I must install a Protocol and ask if I want to select a. I click Yes, but absolutely nothing happens. 4 and 6, Internet Protocol versions are both installed or not. When I try to install one of them, I get an error "can NOT add APPLICATION FEATURE: ACCESS IS DENIED." I have all the permissions set and everything and the only person who uses this laptop. Access should not be denied. And I'm not using a firewall on this laptop or my desktop computer running XP, yet the 2 computers don't even ping them. The laptop connects to the network and connects to the internet perfectly.

  Also, when I go to 'MANAGE WIRELESS NETWORKS' and try to access the properties of my home network, I get a "WINDOWS has ENCOUNTERED YEAR ERROR SAVING THE wireless PROFILE." THE SYSTEM CANNOT FIND THE FILE SPECIFIED. "

  So many errors of this machine Vista makes it obvious that the problems are coming from. I did more research and found similar problems, but still no solution! I also made analyses of viruses, adware scans, etc. and everything is clean. I am stunned with it.

  Any advice would be greatly appreciated. Thank you.

  Hi Cap191,

  1. what was the result of SFC scan on the computer?

  If possible, try to use a wired connection and see if the problem still occurs.

  If you are facing a similar problem with the wired connection, then you will need to back up data and then reinstall Windows vista.

  Installation and reinstallation of Windows Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista

  Back up your files

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-files

  I hope this helps!

  Halima S - Microsoft technical support.

• Im having trouble with my iphone 16 GB ios 9.3.3 5s (G 13, 34) receive error code 22 tries to connect to the server, and nowhere suggestions?

  Im having trouble with my iphone 16 GB ios 9.3.3 5s (G 13, 34) receive error code 22 tries to connect to the server, and nowhere suggestions? I have tried almost everything turn power switch wifi in the middle and doing it to try to track down the problem in the Device Manager and im completely disgusted

  Have you tried turning off and back on again?