problem unziping

Similar Questions

• Module FPGA unzip problem

  I downloaded the FPGA module in a PXI controller, running XP.  When I tried to unzip it, the unzip operation fails every time.  What is the cause?  Is there some sort of requirement for this unpack?  Hard disk size requirement?

  Thanks for help.  I discovered what the problem was.  I downloaded the FPGA module via the link below.  When I tried to unzip it, I would use the default path.  Apparently, the default path is a space at the end of his 2nd record, counting from the end of the path.  It is a small bug in NOR, but it needs to be fixed.  It is difficult to catch, because I don't expect something like that happening.

  https://lumen.NI.com/nicif/us/evallvuser/content.XHTML

• problem with "could not create ' users\locals1 ~ \Temp"-unzip operation cancelled. "

  When you try to install the Blackberry software, I get an error "could not create ' users\locals1 ~ \Temp"-unzip operation cancelled. " How can I fix it?  I am the only user, and I have administrator permissions.

  Try right click on the system icon and then click on run as administrator and see if that helps.

  (t which does not help and because the problem is the installation software Blackberry, pleaee transfer your question in the Forum program at the: http://social.answers.microsoft.com/Forums/en-US/vistaprograms/threads , where programs other than Vista experts will be more than happy to help you with your problem.)  There may be a special procedure to install the Blackberry software that requires additional or different steps.

  I also suggest that you contact Blackberry technical support to see if they can help you - they must be very willing to help you (as they otherwise lose a sale, as you can return it for a refund if you do not it works properly).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• problem installing PES 12 (unzip unfinished)

  Hello

  Windows 7 home edition - 64-bit, at the end of the process of unzipping the files (from contains the indication 100%) a window opens with 'a problem occurred during extraction of some files. CONFEZIONE available space on the computer as well as the writable access rights pour the destination folder of. »

  By clicking OK, back to the drawing board. I have not restricted access (regardless of the directory where I one, the problem is the same) and there are 290Go of free space!

  Thanks in advance for your help.

  Thank you for your response.

  I finally solved my problem by installing the trial version and enabling it with the serial number of my purchased version.

  It seems to work now.

  Good day.

• Satellite P850 - 30 p problems to unzip / run driver update BIOS_V190_WIN.exe

  Hello

  I have a Toshiba Satellite P850 - 30 p and received a message from the
  TEMPRO I need to update a driver, bios 20120907133343.zip, containing [BIOS_V190_WIN.exe | http://nordic.computers.toshiba-europe.com/innovation/download_driver_details.jsp?ID=84198&OSID=-1&OSBUILD=7601&OSBITSIZE=64&driverLanguage=42&SOUR CE = TEMPRO & LNG = 16 & VERSION = V3.3]

  The problem is that when I try to run the update, it initiates
  My Comodo and Comodo sets the program in quarantine.

  Message from Comodo:
  C:-users-user-AppData-Local------Temp------7zSD3B2.tmp------setup.exe Malware @ # 2wsy0bjk3xkui - quarantine - success

  Even if I stopped Comodo, I get problems via a small pop-up that says that 7-Zip access denied.

  Anyone have any idea what could be the problem?

  Ignore this message Tempro.
  If there is no problem with laptop functionality don t change anything.

• Unzip the problem - causes computer unstable

  Whenever I try to unzip a file everything that happens is my computer becomes unstable and I need to turn it off with the main switch (close not normal)

  Try to update Windows and run the check disk, disk clean up and defragnment. If you use a software to decompress, such as WinRAR or WinZip, then try to uninstall it and restart your PC and reinstall the latest version of the software. Before you open the zip files, also scan for viruses.

• Problems to unzip the file in Notepad

  I am trying to unzip a registered ebook which opens in Notepad, but the notebook is full of symbols and signs that make no sense? Can you advise?

  It is supposed to, probably not to open in Notepad. Right click on the file and choose "Properties", and under "file type" in the tab "general", you will see "Text Document (.txt)", "Document of PDF from Adobe (.pdf)", "EPUB (.epub) file" or something like that.
  If she says text (.txt) Document, the zip is probably corrupted, or does not decompress correctly. Download or unzip again to see if it works.
  If she says the Adobe PDF Document (.pdf), open it with adobe reader.
  If it says file EPUB (.epub), download the software Adobe Digital Editions http://www.adobe.com/products/digitaleditions/#fp and open with that.
  If she says something else, search on the web (for example. "epub file open"), or display the file type and extension here, and I'll find one for you.
  I hope this helps.

• Unzip problem

  Hi, I tried to install a zip file for il2 1946 and all of a sudden, all the programs wher and zip files and cannot be opened IE chrome ccleaner sytem restore etc and I can not open the system back restore which im sure would fix the prob HELP!

  Use this utility to unassociate it
  so you can then he reassociate with the program, you need.

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html

  best of the good...

• Installation of Sierra of macOS problems

  I downloaded the software of the day the software out and I tried to install it.

  I use a Macbook 2012 mid pro running El captain.

  Installation of macOs Sierra hung. I checked online that there was a way to see the progress of the installation by typing Command-P and I did but my macbook pro kernel panicked and rebooted and it was happening in loop.

  I called support apple customer and tried the following steps:

  1. I went into recovery and verified mode hard drive.

  2. in recovery, I tried the option "Reinstall macOS Sierra.

  3. I have reset the PRAM and the SMC

  and in the end after all that, I restored my macbook pro from a Time Machine backup.

  At first, I thought that it might be a problem of material, like the RAM, but the computer started beautifully after that I restored it to El captain.

  Then I thought that it could be the software so I re-uploaded it tried to install it again. Same question. Kernel panic and the loop.

  If anyone has any fix for this please tell me that I really don't want to use macOS Sierra

  Hello Aniket8880,

  Thank you for your question on the kernel panics and upgrade to Sierra on your Mac. We love never heard of problems with the updates or upgrades. I want to offer another method for updating your computer on Sierra.

  The first thing we want is that all your data on a Mac is safe and that you have a recent Time Machine backup. Once you have confirmed your backup, we want to format your drive and reinstall the current operating system, and then try to upgrade to Sierra without any of your personal data on the computer. We need to try it because the information in this article help: OS x: when your computer restarts spontaneously or poster "your computer restarted because of a problem." says that if your Mac restarts unexpectedly, known as a "kernel panic" error. After the reboot, you will see a message that your computer has restarted because of a problem. The most likely cause is a faulty software. A kernel panic can also be caused by damaged or incompatible, hardware including external devices attached to your Mac.

  Before you erase your hard drive, make sure that the license for the El Capitan is connected to your Apple ID. If you went into the App Store to download and install El Capitan with your Apple ID, while the license is here. To check, please open the App Store, and then click purchase. Make sure you see OX S El Capitan in the list. If you do not, look for OS X El Capitan and click on 'Get' to attach it to your Apple ID. You even don't need to let him complete the download at the moment. Once you know the El Capitan license is attached to your Apple ID, please open this help article: How to reinstall OS X. See the section titled "If you sell or give away your Mac» We use this section steps because we want to completely erase the hard drive, as explained above. Then, reinstall the current operating system on the Mac, which is the number of step 3.

  Once you restart the Mac, it will look new as when unzip you it in the first box. Set up your account, but don't restore all personal data from the backup disk yet. Once your account is set up and you can access your desktop, go ahead and reopen the App Store. Search for Sierra and download and install it now.

  If the installation finishes successfully, and you can start up to the account you made, we recover your data from the backups that you made. Because the backup is in an operating system that is older than what is on the computer now, you will need to use the Migration Wizard to retrieve the data. This Help article will help you with this: move your content to a new Mac. We can say that the accounts are the same; or there may be an alert, you must check before you do. or it will ask to replace the account, make a new account, or merge the data. I recommend you make a new account. This way if you have a kernel panic when you try to start the account that had the backup, but do not know the question when you start in the new account that you created, we will know that there is a problem with your backup data.

  Thanks again and have a great rest of your day.

• Resolution of some 870 X gtx670m problems

  WARNING:
  I can not guarantee the accuracy, completeness or the assurance that it will work for you *.

  Hello forum,.
  My video card recently gave me problems, given the lack of amazing info on the web, I'll try to make this kind of a tutorial.
  * My rig:
  Toshiba Qosmio X 870 PSPLXK-00Q00N
  Storage: Samsung Evo 850 500 Gb / Toshiba 1 TB HDD
  RAM 16 GB (4 x 4)

  * Video:
  NVIDIA Geforce GTX 670M / 3Gb
  Model number V000280680
  B of MXM 3.0 type housing

  For an easy understanding, here is a picture of my motherboard

  https://drive.Google.com/file/d/0Bwq...EW?USP=sharing

  -J' tried to bugs:
  1 format and reinstall windows 7 and 10.
  2 reset the CMOS.
  3 disassemble the laptop to check on the CMOS battery.
  4. clean and renewed thermal paste to the GPU and the CPU.
  5. comparative analysis with 3DMark and Prime95. Throw the RAM, the processor and the motherboard, being the GPU as the culprit of the problem.

  Looking for maps of replacement which gave me ideas to upgrade the GPU. I called the service $400-600 repair center.

  -L' idea:
  I came up with the crazy idea to Flash the vBios with another firmware, some time ago, I was me sleeping with GPU - Z and made a copy of my firmware, I searched and found others on the internet, so I decided to give it a shot. I knew I could probably kill the video card so in order to access my laptop I installed teamviewer, logmein, AND I tried with the video card taken flight and worked. Then I have a video card, flash video is totally dead. Then I flashed back to my old firmware and that is, I used it for a week by monitoring the behavior with the msi afterburner and everything is fine, even with long game sessions. Therefore, I think that the firmware may got corrupted somehow.

  -Method:
  Here I describe the flashing method used in this case, it's very simple, but be careful.

  1. download teamviewer and logmein. Put in place to start with windows and connect from another device without getting anything in the laptop, if you need to enter something after the laptop running trying to memorize what to do because you could be blind!

  2 download GPU - z
  https://www.techpowerup.com/GPUZ/
  Make a copy of the vBios firmware, just click on the button next to the BIOS version, it should create a ROM file
  Then there's a link with some roms for GTX670M

  https://www.techpowerup.com/vgabios/...Emsize=&since=

  This ones is verified, here are the ones available for the unverified GTX670M from Toshiba, I transferred my ROM not so long ago, more precisely the 70.24.44.01.03 is exported by me:

  https://www.techpowerup.com/vgabios/...memSize=&since=

  3. download the tool here nvflash
  https://www.techpowerup.com/download...ashing/NVIDIA/
  Unzip and place these files and the ROM all files in a folder.

  4. Enter cmd in admin mode and go to the folder where the files are located.

  5. type:
  nvflash64-6 *.rom
  (* the name of the rom,-6 file cannot ignore any error).
  NVFLASH will ask to you if you want to continue, enter y for Yes. It will end to make a beep very hard.

  6 cut, remove power, remove the battery, press the power button to drain remaining power.
  Put back in place the battery and the power cord, press shift + f8 + power button, if this doesn't start t try to do this a couple of times more.

  7 done!

  If you want to go a look deeper for tutorials and videos to youtube of nvflash.
  I hope you guys find this little guide useful to solve your problems my methods were perhaps not the best, because I am not an expert, but if you have doubts write them on the forum, good luck!

  SECOND PART:

  Various:
  -I recommend to install msi afterburner to check temperatures and usage, you can configure it to display it in the game. Here is the video tutorial for that:
  https://www.YouTube.com/watch?v=OZx8PbFmeEM

  -When I almost abandon a friend came with a mini pci-e adapter attached to a massive video card, we have removed the wireless adapter and plug the adapter, immediately recognized the laptop! So, in case your video card is really ruined or you want serious juice here is the link, you can find it on ebay or amazon. Link:
  http://m.banggood.com/Mini-PCI-E-ver...p-1011222.html

  -When the installation/reactivate Windows 10 If you think that the function keys do not work, here are the drivers:
  http://Support1.toshiba-tro.de/Tedd-...1002134400.zip

  -J' found a Turkish forum where someone asked on the upgrade to 770M NVIDIA, he worked not just as plug-and-play, but a guy recommend amending the vBios, replacement of the id of the map and linking a tutorial to upgrade 460M to 560M, here is the (Turkish) link if you dare to do
  https://www.technopat.NET/Sosyal/Kon...asyonu.105493/
  If you succeed, please share the knowledge!

• HP 250 G3: Graphic driver problem

  HI, this problem is literally driving me crazy: I recently bought a laptop very nice and cheap: HP 250 G3 professional laptop. The laptop was very cheap because it came without an operating system, but it was not a problem for me because I already had my own. Now, after I installed Windows 7 32 bit, I had and service pack 1, I went to the HP site to look for drivers, only to find out that they are only available for the 64-bit system. For some of the components, I managed to find the drivers online. However, I can not install those Intel HD graphics card. I tried everything, downloaded a lot of different versions of the driver, tried to install manually from the Device Manager, but all I can see there is the standard VGA and spare no effort to update did not work: the .exe file tells me that I have no required system, so that when I do it manually it tells me that the appropriate driver has been installed. In addition, the HP utility cannot detect any driver, chipset or anything like that. Please help me and tell me that the only way is to install a 64-bit version of the operating system, which sucks!

  There is only one driver in the world who might work, and it took me awhile to find it.

  This one... Download, unzip and run the exe to install.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=23889

• Game Minecraft OpenGL satellite L650 - driver update problem - PSK1E

  Hello

  I know that several posts have already highlighted this problem.

  I have a Satellite L650 PSK1EE.
  Sorry if this is not the right place to post but I could not find anywhere else to start a new thread.

  Essentially my children want to use * Minecraft * on this laptop. I downloaded it but get the error message that my graphics driver is not compatible opengl. I only have Intel. So I tried the usual driver updates, then I tried to download a generic Intel driver but I don't know which one is right.

  Once I have selected * chart * then * laptop graphics driver * s then I get the choice between 2nd or 3rd generation processors, accelerators and mobile chipsets, which none means nothing to me and I'm stuck.

  It seems that some people have managed to circumvent the built-in graphics card driver and update manually one this way, once you know what you download and then unzip and so on...

  Of course, I can waste my time.

  If anyone knows how to proceed, I'd be very grateful for any help so that I can stop spending hours Googling this.

  Thank you very much

  Hello

  You must install the Intel HD driver.
  Try this driver of graphics Intel HD for Win 7 and Win 8

  You must choose the zip (NOT exe) for System 32-bit or 64-bit package according to the version of the system that is installed on your laptop.

  [Drivers Mobile Intel HD graphics | http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Graphics& ProductLine = graphic + portable + pilots & ProductProduct = 2nd + generation + Intel % C2% AE + Core % E2% 84% A2 + Processo rs + with Intel % C2% AE + HD + graph + 3000% 2f2000]

• Download windows 8.1 update to correct the problem with compablity with discs for WP - 4540 printer.

  HP Pavilion TouchSmart 23All all-in-one, Windows 8.1. After you download the Windows 8.1 update, the problem is the computer will not Unzip.exec program to fix my problem.

  Yes, once you have downloaded the latest version 8.1 of windows it fixed compatibility with readers for the printer Epson WP-4540. It seems that you need to download windows 8.1 whenever Microsoft updates windows 8.1. Microsoft adds new software for the devices and programs. My Hp computer has windows 8 and I had to upgrade to 8.1 windows. Then I had to download the latest version of windows 8.1. And this corrected the problem.

• Satellite U500 - 1-8 - BIOS update problem

  Hello

  I have a problem with * BIOS * update on my Toshiba * U500 - 1 d 8-PSU9ME *.
  Currently, the BIOS is + v1.50 +, but on this page http://eu.computers.toshiba-europe.com/innovation/download_bios.jsp?service=EU
  I found the new version + v1.90 +. (I know that the BIOS update should be made not when any problem occurs, but I occasionally some problems on startup etc...)

  When I run the update * UBIOS.bat* that nothing happens, but the thread * WinFlash.exe* is running on background.

  What can I do? I found this manual http://aps2.toshiba-tro.de/kb0/HTD9502M10000R01.htm, but it is not useful.
  Any idea?

  Thank you
  Concerning

  Hello

  If you have downloaded the BIOS v1.90 so you need to unzip (uncompress) first of all, this package. Inside the packaging, you will find the BIOS190.exe
  You must run this exe file.

  You say that WinFlash.exe is running on the background. Well, try closing this process and start then start the update
  You can also reboot the device and might try to start the procedure once more

• Qosmio F60 - hibernation of freezing and problems starting

  Hello...

  The problems started when my computer goes into hibernation mode and when I press the power button to launch once again, it remains frozen.
  I then press the switch to turn on it works again.
  Option just to start normally or in safe mode.
  Either way comp freezes in the middle of loading and I must push the switch down to the Tower model

  Then the new restart msg saying there is a problem in the start menu and asks me if I want to solve the problem
  I click Yes and a number of things have happened several times:
  (1) computer sets and loads normally
  (2) computer says he can not solve the problem and continues to load correctly
  (3) the computer freezes in the middle of loading or during the process of setting
  (4) computer sets and restarts but crashes in the middle of reloading

  I often have to go through this time half a dozen before I can load normally

  either way my norton antivirus has been come with messages saying I need to reactivate (my subscription is not exhausted) or an error has occurred
  have done a full virus scan - none found

  is this a virus problem? I do a system restore? any other advice?
  help much appreciated

  Hi kkle4,

  You use the preinstalled version of Windows 7 in Toshiba? I can t find any information in your posting on OS :(

  Otherwise I agree with Akuma and you should check the BIOS version and probably an update would be useful. Before you begin to update of the BIOS here are some useful tips:
  -Close all running programs (also, antivirus, firewall, etc.)
  -Make sure that you are logged on as an administrator
  -Unzip all files from zip archive
  -Connect the AC adapter before you can update the BIOS and make sure the battery is fully charged