problem installing PES 12 (unzip unfinished)

Similar Questions

• Problem installing PES 12 on Win7

  Yesterday, I bought a physical copy of the PSE 12 at Staples; He had a redemption card.  In my first attempt to install, I don't have a serial number right, so opted to install the trial version; I got in Organizer and pull up a photo, but he made no changes.  Then I registered with an Adobe ID & got the serial No. from your Web site.  Tried to install non-evaluation PES 12 of my drive, but it says "the expir├⌐ trial" when I tried to enter in PSE.  Tried again with the same result.  Deleted stuff PES of my programs files and later the Adobe folder in my library of Documents.  Try again to install the PES of disc, I find once again "trial has expired".  I know that I have not followed the instructions of Adobe precisely (I'm a clueless user who depended on GeekSquad for my PC that was bought new in October 2013 with Win 7 and works very well). What should I do to get the PSE running?

  ADDED a FEW minutes LATER: Oh.  Now I see that it actually allows me to use PSE after all. So with the message expired trial just being here for a month and then disappear?

  Yes.  When I say the message about the trial being expired, I thought that PES would not let me do anything. Then I realized that I should just try it.  If everything is OK now.

• Problem installing PES

  I have not tried a bunch of times to install 10 PSE on my Windows 7 (32 bit) desktop.  It stops at the point where it is installing the package Shared Technologies and fails and a rear roll in is uninstalled.  I looked at the Setup log and messages to the effect that some of the 'payloads' can not be installed there "" dependencies are x 64 payloads that don't are not supported on this machine x 86".

  Interesting, I was able to install the program on my laptop which is Windows 7 64 bit.

  Have no indication as to why I can't install on my 32-bit desktop?

  Thank you

  Doug

  I solved the problem by doing one of the things suggested on the basis of knowledge of the elements that was to start in clean boot mode.  First of all, I tried just to start with all my startup programs turned off and that he did not.  Then, I turned off all non-Microsoft services and started in minimum mode again.  Who did the trick.  I noticed that one of such services was Spybot and it could have prevented installation make certain changes in the system registry.  So I guess the answer is to make the installation with a minimal system completely!

  Doug

• Problem installing PES 11 on Macbook Pro

  When I try to type the serial number to install, my computer will let me type numbers in the boxes but will not let me type some letters.

  you need to find your serial number: http://helpx.adobe.com/x-productkb/global/find-serial-number.html

• Problem installing Windows 7 from PES 9

  A while back I bought Photoshop Elements 9 and he was properly executed on Windows XP.  Now, I have a Windows 7 computer (with service pack 1) and try to install PES 9.  Autorun starts as soon as I get the message: "the version of this file is not compatible with the version of windows that you are running.  Check your computer system information to see whether you need a x 86 or x 64 program version... »

  Any help on this problem is appreciated.

  You can buy Photoshop elements 11. PES 9 is not compatible.

• Problem installing device a1530n

  Running Win XP Media Center Edition.  Had minor graphical problems at the top of the IE bar periodically endangered.  Decided to remove the Intel (r) 82945G Express Chipset adapter in Device Manager and then do a scan for new hardware.  And now I get the message of the new hardware detected that says.

  Cannot install this hardware

  There was a problem installing this hardware:

  Intel (r) 82945G Express Chipset Family

  An error occurred during the installation of the device

  Access is denied.

  I am connected to the computer as an administrator.  I tried to install this even in safe mode and get the same error above.  Any clues on what do I do?  The computer runs only in VGA mode.

  Thanks in advance.

  Link to screen shot of the error message.

• Satellite P300-133 - problem installing Win Xp

  Hello

  I have a problem installing win xp to Satellite p300-133.
  To resolve this problem, I have tried the solutions:
  switch to ahci mode in bios and incorporating storage drivers compatibility intel to the installation cd xp with nlite, but none of them solved the problem.

  Laptop computer starts from the cd of xp and xp installation says "program Setup inspects your hardware configuration" and then a blank black screen comes.
  After that, the installation does nothing and waits indefinitely.

  Any ideas on this problem? Thank you.

  Hello

  > switch to compatibility ahci mode in the bios and the integration of the storage drivers Intel to xp with nlite installation cd, but none of them solved the problem.

  The two methods are good!
  You can install the Win XP without drivers Intel Storage Manager (SATA drivers) but in this case the SATA mode must be on compatible mode.
  It works for sure!

  The second method is the installation of the SATA drivers with nLite (drivers can be integrated into the new drive Win XP).

  I put t understand why this doesn t work on your laptop. I think it's a problem with your Win XP drive. Contains this Win XP SP2 or SP3?
  If this isn't the case, then you should use nLite to include min the Win XP SP2.

  Check it!

• Problem installing PCI-6220

  Hello

  I have problems installing a PCI-6220. The card has been installed a couple of years on a PC and rarely used. I withdrew from the it and connected to a new PC (Intel core i3 2.93 GHz, Windows7). After installing the card on the new PC in a first time, I could read the name of PCI6220 under 'Devices and interfaces' (in the program MAX) but I´d not been able to define it as a device. So I tried to remove the card and plug it in again and now the situation is even worse, I only see an "unidentified PXI system" in the program of MAX.

  Any idea what bad and what can do to make sure that the card does not work properly? As a reference, I need to connect to a CA-1000 enclosure housing a CB-68LPR device.

  Thanks in advance,

  G.

  Install the latest (9.3) DAQmx-drivers for your PCI, which could help.

  http://Joule.NI.com/nidu/CDs/view/p/ID/2337

• Problem installing LAN USB adapter in a new copy of windows 2000

  After having reformatted my hard drive and install a new copy of window 2000, I'm having a problem installing device drivers.  When I enter the correct inf file path, it reports that this window has not found a driver for the device.  Whithout the possibility to connect to internet, I have exhausted all my options and still need to install several other drivers with the same problem.  help help help help

  Everything you try to use (you do not give the brand / model of the LAN USB adapter) made drivers for Windows 2000?

• Problem installing Webroot for MSN (part of the Internet software of MSN Premium subscription) "error 5: access is denied" and "Setup could not create the directory"C:; Program Files/Webroot/security /...

  Original title: problem installing Webroot for MSN (part of the Internet software of MSN Premium subscription)

  Try installing Webroot to MSN but when I run the installer, I get "error 5: access is denied" and "Setup could not create the directory"C:; Program Files/Webroot/security/current/plugins/antimalware/Backup ". OS is XP with Service Pack 3. I tried to delete my existing Webroot program and turning to the bottom/off other security options... Any suggestions? Thank you.

  Thanks for the reply. I was able to finally get the new Webroot program to install after running a Microsoft Fix affecting the directory uninstall the old prgm Webroot and meets a new error code (1603), which led me to this site to permissions Grant full control to the SYSTEM account.

  http://support.Microsoft.com/kb/834484

• IPod Classic 7 G 160 GB ' there was a problem installing this hardware: Apple iPod USB Device ".

  I have recently (June 2014) bought a brand new Ipod Classic 7 G 160 GB Model A1238.

  Whenever I connect via USB to a PC running XP SP3 and Itunes V10.0.7.2 it is always treated as if it were a new connection, i.e. "new hardware found". After trying to install it, it says so "cannot install this hardware" and "there was a problem installing this hardware: Apple iPod USB Device."
  I have also a 2009 16 GB Ipod Nano 4 G model 1285 and this is recognized by the PC whenever it is connected through the USB port itself.
  I connected the Ipod Classic 7 G to a laptop running Vista and Itunes V10.0.7.2 where the Ipod is recognized and installed.

  Even if the PC States that there is a problem installing the Ipod, it still appears in Itunes and I can download music to it and disconnect by using safe mode disconnect.

  PC XP SP3 - Ipod Classic
  I watched "Device Manager" under "Drives", the Ipod Classic is listed as an "Apple Ipod USB Device", but has an exclanation score against it.

  Right-click on the 'Apple Ipod USB Device' properties and the "Volumes" tab it shows the drive with the exact name and the size of the data, by clicking on the properties of "Driver" tab it says 'Unknown' driver provider, driver Date and Driver Version as being "not available". By clicking on the "Driver Details" properties, it shows a driver file-

  C:\WINDOWS\system32\drivers\PartMgr.sys, File Version 5.1.2600.5512 (xpsp080413-2108).

  Under "Device Manager" USB controllers, there is an entry for "Apple Mobile Devices USB Driver" and a "USb Mass Storage Device"

  The 'Apple Mobile Devices USB Driver' lists two drivers:
  C:\WINDOWS\System32\Drivers\usbaapl.sys and
  C:\WINDOWS\System32\usbaaplrc.sys

  The "USB Mass Storage Device" list a driver:
  C:\WINDOWS\System32\Drivers\USBSTOR. SYS

  PC XP SP3 - Ipod Nano

  I repeated the steps above with the Ipod Nano, connected to the PC and the driver provider is presented as Microsoft with the driver as 07/01/01 Date and Version of the driver as 5.1.2535.0.
  In the "Driver Details" properties, it shows TWO driver files:

  C:\WINDOWS\system32\DRIVERS\disk.sys AND meanings
  C:\WINDOWS\system32\drivers\PartMgr.sys.
  At the same time with the Version of the file 5.1.2600.5512 (xpsp080413-2108).

  The 'Apple Mobile Devices USB Driver' and "USB Mass Storage Device" are the same as for the Ipod Classic.

  I followed the procedure to remove Itunes and even the update to Itunes to V11.2.2 nothing works.

  I am aware that the system is also that XP can now be updated.

  So, why not not Windows Installer Ipod Classic and why the disk.sys driver does not appear

  According to the details of the pilot?

  Is the 7 G Ipod Classic not compatible with XP SP3?

  Yes it is compatible with XP SP3.

  Try asking in the forums of Apple iPod:

  https://discussions.Apple.com/community/iPod/ipod_classic?CategoryID=204

• Problem installing disktop 800 wireless drivers for windows xp

  Problem installing disktop 800 wireless drivers for windows xp

  Hi Samir,

  I see that you are unable to install the drivers disktop 800 wireless. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  3. have you made changes on the computer recently?

  4. What is the error you get when trying to install the driver?

  Please provide us with more information to continue troubleshooting as a result.

  See the link on how to ask questions or help on the Forums.

  Suggestions for a question on help forums: http://support.microsoft.com/kb/555375

  Refer.

  Wireless and wired network problems: http://windows.microsoft.com/en-US/windows/network-connection-problem-help#network-problems=windows-xp&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• When you try to install the HP Laserjet 1300 printer error there is a problem installing this hardware.

  Original title: HP Laserjet 1300 Windows XP, SP3 error installation

  When you try to install the HP Laserjet 1300 printer, I get the following error message and the process stops and restores.

  CANNOT INSTALL THIS HARDWARE

  There was a problem installing this hardware

  HP Laserjet 1300 PCL 6

  An error occurred during the installation of the device.

  The specified Module could not be found.

  I have used the original printer installation cd, bought a new cd from HP and downloaded the drivers directly from the HP Web site and I get the same error.  The record show error install printer on each attempt of events. Can anyone help?  Thank you

  Hello

  You are able to install other programs?

   

  Method 1: See the following article:

   

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02073861&LC=en&cc=us&product=3795406

   

  Method 2: view the following steps and see if that helps.

  (a) disconnect the printer

  (b) uninstall the software and drivers on the computer

  (c) plug the printer back

  (d) allow the Hardware Wizard search for drivers

  e) if it does not, it asks you to install the source for the drivers, the installation driver CD and install the drivers and see if that helps.

• Problem installing KB2728973 ' Unathorized digital certificates could allow spoofing "which was released 10JULY2012

  Has anyone had a problem installing KB2728973 ' Unathorized digital certificates could allow spoofing "which was released 10JULY2012?  I could not this patch to run after double-clicking on it.  This was true for XP SP3 and Server 2003 SP2.  Your comments are appreciated.  By-the-way, I met all three requirements that are suggested in the section "Known issues" section of Microsoft.

  Help us help you: start by reading this post 'sticky '...

  What information to post in the Windows Update forum
      http://answers.Microsoft.com/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

  ===========

  It is a forum for specific consumers. You will find the Windows Server support in these forums: http://social.technet.microsoft.com/Forums/en/category/windowsserver

• Problem installing HP Deskjet F2280 and Windows7

  Hi people,
  I have a problem installing my printer hp deskjet F2280 all-in-one printer. Its saying its compatible on the windows 7 and custom allow to be the command "run under...". ».  This printer is only 6 months old :(
  Anyone got around this problem yet?

  Thank you

  Hello SeaCos,

  Thank you for using the Microsoft Windows Vista Forums.

  If notifies you that it is not compatible with Windows 7, you need to contact HP support to see all the drivers compatible. Are you following the steps below to set up your printer? Please let us know status. Thank you!

  http://www.HP.com/SBSO/bussupport.html

  Windows 7 install a printer
  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Open devices and printers, click the Start button, and then click the start menu, click devices and printers.

  Click Add a printer. In the Add Printer Wizard, click Add a local printer. Choose a printer port page, make sure you use a button existing port and the recommended printer port are selected and then click Next.

  On the installation of the printer driver page, select the model and manufacturer of the printer, and then click Next.

  If your printer is not listed, click Windows Update, and then wait while Windows searches for drivers additional. If none is available and you have the installation CD, click disk, and then navigate to the folder where the printer driver. (For additional guidance, see the printer manual.) Perform the steps in the wizard and then click Finish.