Problem with stamp - color

Similar Questions

• Problem with printer color ink large format 7500 has

  Having a problem with the color cartage 920XL

  I tried to print several photos of 4 x 6, where the first is fine and 1/2 way through the other, it starts to print only red

  installed 3 new cartridges, printer head cleaning color, alignment and began to print 4 x 6 photos and the same thing happened.

  Help, please

  I just bought 3 920 new (no large capacity) and was going to try a 3rd time but whated to here from you

  Thanks Mike

  Hi SchneiMB,

  Try the following solutions in the order presented to resolve the issue. When one of the solutions solves the problem, there is no need to continue troubleshooting.

  Troubleshooting print quality problems

• problem with the color picker tool

  Hi there we use Fireworks CS3 and seem to have problems with the color picker tool.
  
  When we hover over a color and select it, we do not get the same color. Sometimes, we choose a blue color and it translates into a green.
  
  Also when we have a color for example chabouni and reduce the color so something lighter, he returned to the Carter.
  
  Can anyone suggest what might be the problem.
  
  This has only started happening recently and nothing major has been installed or removed from Fireworks.
  
  See you soon
  LTA

  Hi Alex,

  Im not sure if you said today or not.

  "Your a chamption!

  Thanks for your help, it works perfectly now.

  I must have accidentally clicked on the nod to the colors for the Web.

  Cheeers
  Malcolm

• OfficeJet 5470 e-all-in-one: Subscriber instant - problem with #62 color cartridge - Cyan Ink only

  I just installed a new color cartridge and our copies look right.
  
  I aligned the printer and then cleaned them (the two cleanings) and Print quality Diagnostic report shows nothing in the column "Cyan".
  
  Is it possible that the cartridge is defective?
  
  Thank you very much for your help!

  Hi @fiveinthetree,

  I understand that you are having some print quality problems with your HP Officejet 5740. I'll be happy to help you.

  It is possible that the cartridge you received is defective, however, there are some troubleshooting, you need to try before you can replace as defective cartridge.

  I recommend contacting instant ink 1-855-785-2777 for support in real time with an agent. If they determine that the cartridge is defective, they can help you with the replacement.

  If this help will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

  I hope this helps and have a nice day.

• Color laserjet 4600 - problem with one color (yellow) for the most part does not print

  Colors look purpleish when printing photos.  It turns out that this is a problem with yellow print.

  We tried to replace the yellow toner cartridge, and it was not fixed.

  PQ troubleshooting, the yellow page is empty except for a thin (16th of an inch) to 99% a horizontal line at the top of the page.

  In the configuration page, all the different areas that should have the yellow are mostly empty, with the exception of the same sort of thin horizontal line at the top of each of these areas.  After updating the firmware from 03.001.0 to 03.016.0: in addition to what is described on the configuration page, some of the fields in the configuration page that should be yellow, have a pale magenta and more this yellow line.

  Our technician came several times and has so far tried to replace the hvps, scanner laser, toner alignment and trainer kit Board.  Nothing has improved the question.  Then for the replacement is the regulator dc ($1000).

  Anyone here have an opinion on what could cause this problem?  It seems they are just throwing parts at home and we're about to tell them to give up.

  It wasn't the dc controller.  I figured out well out - somehow, there was a spring missing behind one of the speeds in the train of drum roll.

• Problem with the color when exporting to other Adobe programs

  Hello

  When I uses 32 bits per layer in my After Effects to get the really nice glow effect and make everything look OK, but when I use the Dynamic Link for Premiere Pro and then try to make my sequence with Media Encoder deferential eye colors inside After Effects.

  Is there a problem with 32-bpc and dynamic link, or I do something wrong?

  Editing programs do not operate in 32bpc, even if PR calculates the effects in 32 bits. This has to do with the range and models of different colors. Usually 32bpc also requires correct color calibration and conversion via LUTs or profiles from your computer screen is not initially 32bpc. This being the case and to avoid the problems of conflicting settings and hardware acceleration (which is also used for color management), in such situations, it is better to make the file and import it in first. Otherwise, you have work major reading and configuration to do.

  Mylenium

• Problem with editing colors in Illustrator CC2015

  Hello

  I'm having a problem when I try to use the function "change colors" in Adobe Illustrator CC2015.  I selects a section/items to be recolored, select "Edit colors > Recolor art" in the "Edit" menu

  When the 'Redefine' window, Illustrator automatically recolors the selected items without my choose what colors I want to change, or what color I would what they changed. It seems that illustrator applies the swatch/colors of something I last selected.

  This makes it impossible to change the colors. I have never had this problem with Illustrator before, looks like when everything started when I upgraded to CC2015.

  I hope that the screenshots below will help you to show my problem.

  This is the work I'm going to select to recolor:

  

  Then, this is done AUTOMATICALLY as soon as I select edit colors - illustrator applies colors in my work without my said to do:

  

  Or, if I had just done a red rectangle, Illustrator automatically apply red in the pane to change colors:

  

  If anyone has AN idea of what's going on, please help - I tried to understand what is wrong for weeks.

  This is a bug and it is being investigated. As for now, you can click the eyedropper icon in the Recolorier Art dialog box to reset the graph.

• Problems with the colors and the other in CS6

  Hello world

  I ask your help today for the first time, because I'll have some pretty big problems with colors in Adobe Photoshop CS6

  I'll let you watch this video I recorded for you show what kind of problems I have. As you can see, a very specific color black...
  In addition, you can observe the framework arround the image flashes sometimes...
  

  and two screenshots, the firt we're here to show you the problem, the second to show you my configuration:
  On the one below, you can see the tray black is supposed to be the same blue as selected...
  

  
  
  I also sometimes flashes of the space work and other things like that... But I'm sure that all the problems are related: if I can solve the problem I have with the colors, everything should get back in order.

  Thanks for your help!

  Edward - France

  Update your graphics driver.

  Mylenium

• Problem with my colors

  I installed Photoshop CS6 trial. I tried to create a surface of blue color (r: 0 G:0) B:255) but it was black instead of blue. But only on screen (Screenshot), I have this same problem with the Green surfaces (r: 0 G:255 B:0). But with the red color (R:255 G:0 B:0) it works. But can you help me?

  

  Saved file

  

  Screen (the language is 'German')

  Looks like a known issue with some AMD/ATI graphics card drivers: pixels with red = 0 are displayed black. As far as I know, the very recent 13.2 Catalyst beta 5 is good.

  http://support.AMD.com/us/KbArticles/pages/AMDCatalyst132BetaDriver.as px

  If you do not want a beta driver then use Catalyst 12.8.

• Problem with clip color when you export a sequence

  Work on an iMac i7, CS 5.5

  I created a composed sequence 3 staples. I color corrected the first two (using the RGB curves Corrector) but not the last one. The clips are transcoded DNxHD original AVCHD (which I can't treat gently on my iMac). When I saw and/or make my sequence, the colors are great for all the clips.

  When I try to export it as a Quicktime H.264 movie, the first two clips are rendered as I want to, but the last of them (with no color correction) only has the plan of the blue color!

  I tried to export directly (without delay) or by using the queue of the SOUL, but the results were identical.

  One solution is to 'pretend' to correct the colors the last clip (barely, I adjusted the Red). Then export works very well.

  Sounds like a bug to me candidate!

  Known problem and workaround: movies have a blue cast when exporting through Adobe Media Encoder in Adobe Pro CS5 first or CS5.5

• problem with the colors when printing to PDF in FM9

  Hello

  We have some problems with printing to PDF with FM9 colors.

  FM document files eps (1) with a green box and (2) a rectangle created with the tools chart FM, filled with the same values of color green (91/0/60/44)

  In FrameMaker both colors is really different, but too bad, in the PDF color (eps) and the rectangle obtained the same correct green color.

  OK, him differed in creation, so they were CMYK and RGB, but your printing coming.

  Now in FM 9:

  (1) if I do a "save as PDF" and turn off "convert to CMYK in RGB" resulting PDF is the same from FM8 (correct)

  (2) if I print to PDF via distiller and set job options for "convert all colors to CMYK" resulting rectangle Green is very different from the greenery of the eps.

  I tried different options, the best result was "convert all colors to CMYK", the other options just very more ugly.

  Does anyone of you know a solution to your problem? The help is very appreciated. I could send examples of files if necessary.

  Thanks in advance.

  PK

  PK - ulm wrote:

  But we want to use the option to print using the Distiller.

  PIA,

  This sentence needs some explanation, I think. Why you want to use the print option?

  Using the print option,-you're always going the same route that FrameMaker Win has always been, that uses the postscript RGB driver only Windows. Now with FM9, you have the possibility to get CMYK directly to PDF, as defined, without any color conversion. And it * is * works, as long as you limit your documents CMYK or spot from the FM library.

  So, once again: why do you want to use the print option?

  On a sidenote: I do not know if I interpret your username correctly, but if you are able to understand German, you will find some tests deep color manufactured FM9 here: http://www.hilfdirselbst.ch/foren/FM_9_und_Farben_in_PDFs___getestet_P387800.html

  Bernd

• CS4 problem with background colors

  Hello

  I've recently upgraded to Dreamweaver CS4 from CS3. Since the upgrade I have a problem with the background colors for the divs layout. I can't make them appear.  I use a PC and use any programming on this other than xhtml and css work. I created a div named "main_content" so that I could change the background color. The div is written in xhtml as usual and color is listed in the CSS file as appropriate and the CSS file is attached to the html page and it's normal, but no color appears.

  For clairity, this is how it is implemented.

  < div id = "main_content" > content goes here < / div > <! - main_content - >

  In the CSS file is written like this.

  #main_content {background-color: #e1e1d6;}

  }

  It has always worked before, including at - it a bug or something in CS4 that I have to work around?  I would appreciate help with this problem.

  Thank you

  quicpic

  It should work. Are you sure there aren't any typos or a bad path to the css file? Can you post the whole code? It works, if you use the CSS dialogue window? If so, are there differences in the code?

  - Alex

• Problems with Spot color gradients

  Hi all

  I have little experience in dealing with spot colors.  I'm trying to mix two colors of accompaniment for a print job.  Unfortunately the spot color gradient (left image) do not mix like the gradient color of the process (right image).  On the contrary, they will fade to a lighter color in the Center where they meet.  I'm sure that someone out there can help you because I think that is more of a technical problem that I'm just not familiar with.  Thanks in advance to all comments!

  Hugues

  

  Hi Hugh...

  The difference between two images, is the color range, mode CMYK is larger than the spot colors, this cause an incompatibility of mixture. If you want a better overview of your spot color on preview test print on the view menu, but don't forget that the reference of the right color is Pantone color card.

• Problems with the colors

  I hope that makes sense for everyone, somehow when I was messing around with the colors on my screen, well, I thought that I just changed the outline of color display box well apparently not whenever I'm looking for something on the bottom of some site web it is comes in blue instead of white like it's supposed to be , and it's really hard to read things on a blue background, I tried everything I know possible to fix it. Please if anyone can help me it will be greatly appreciated! Thank you all! Have a great day!

  If you are using Internet Explorer, select Tools, Internet Options , and then click the color on the first page (e.g. General) of the Internet Options dialog box.

  

  Put a tick the use Windows colors option and click OK at the bottom. Click OK again to close the Internet Options dialog box.

• Problem with "change color"...

  Hello everyone,

  I have a quick question...

  I inherited a Flash map generator. Basically what it does, is that the end user can submit their own design to create their own exclusive gift/loyalty for the specific brand cards.

  My questions, this is one of the customers of our customers complained that their images colors are not printing as the original works of art. They are subject to CMYK images and Flash Builder map spit card finished in RGB.

  I know that this is how Flash handles the colors. but I wonder if it just what I can do to get the card Flash Builder make output color as close to the colors of the original CMYK image as possible? Photoshop color correction is not an option.

  Thanks in advance for your answers/suggestions. Thank you!!!

  In general, because the two areas do not overlap, you are sure not not to convert all colors to another accurately. At best, you might want to find a library that has a lot of logic by guessing the color appropriate for the conversion from CMYK to RGB. You must then take the bitmap you have loaded and use something like a BitmapData to read the color value of each pixel, translating to CMYK in RGB pixel by pixel.

  I have really great basic example of a function in AS3 Basic CMYK to RGB conversion would be:

  function CMYKtoRGB(c:Number,_m:Number,_y:Number,_k:Number):Object

  {

  var r: Number;

  var g:Number;

  var b:Number;

  r = 255 - (Math.round (2.55 * (c + k)));

  g = 255 - (Math.round (2.55 * (m + k)));

  b = 255 - (Math.round (2.55 * (y + k)));

  If (r)< 0)="" r="">

  If (g< 0)="" g="">

  If (b< 0)="" b="">

  return {R:r, G:g, b: b};

  }

  You would end up with something right, close, in RGB. To convert the RGB in number (converts Flash hex numbers in any case) is as simple as:

  function RGBtoHEX(r:Number,_g:Number,_b:Number):uint

  {

  return of r< 16="" |="" g="">< 8="" |="">

  }

  It returns a number, but still just Flash Converts hexadecimal number in any case. If I used this on the original color to CMYK (c: 0 M:38 Y:100 K:0) he would return (R:255 G:158 B:0) RGB or hex (16752128). However to enter this same color CMYK in an application like Photoshop yeilds quality RGB (R:255 G:174 B:0).

  The difference? Here is a box drawn in Photoshop in CMYK color mode with this next to Flash drawing CMYK color 2 boxes, one with the color of Photoshop converted, second with the color conversion codes above. Photoshop and Flash using the Photoshop color conversion is obviously much better than the result on the right. You just need to be a very solid library for the missing color-space conversion. And even as good as Photoshop, you can still see a difference between Photoshop and Flash together.