Problem with Optiarc DVD Drive

Similar Questions

• Problem with Optiarc DVD RW AD-7561 ATA Device

  Hello. Have the same problem as the user with the AD - 7650 A device. for example! and shows incomplete details in the registry. Can I use the same solution for the model AD-7561 or do I need a different key? Thank you

  Marg

  Hi Marg,

  Cause of this problem: A registry problem was detected. This error may occur if one or more of the following conditions are met:

  ·         More than one service is defined for a device.

  ·         There is a failure opening the service subkey.

  ·         The driver name cannot be obtained from the service subkey.

  To resolve this problem follow the steps mentioned below

  Step 1: Uninstall and reinstall the drivers.

  You must be logged on as administrator to perform these steps.

  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. in Device Manager, locate the Cd\dvd drive, and then double-click the device name.

  3. click on the driver tab and then click on uninstall the driver, and then follow the instructions.

  Restart the computer in last good Configuration on the known (LKGC), it is given the registry to the last successful configuration.

  To restart the computer in last known good configuration, follow these steps

  Step 2: Start the computer in LKGC, to do this, follow the steps below

  Access the menu advanced startup options by turning on your computer and pressing the button F8 before Windows starts. Boot advanced options, select the menu LKGC

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Now check if the problem is resolved

  Reference:

  Explanation of error codes generated by Device Manager

  http://support.Microsoft.com/kb/310123

  Device Manager error codes

  http://support.Microsoft.com/kb/953933

   

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have a problem with the DVD drive not detected on Windows 7.

  I built a new PC (I've built a few of them).  This time is not considered my ASUS BD player with Windows 7 DVD burner.  It is not in either Device Manager just do not at all recognized.  The BIOS for the ASUS P9X79 of luxury see the SATA drive without problem.  Sometimes after restarting the BD Player looks and functions perfectly, but when the computer goes to sleep or shuts down is usually not there when it is restarted.  Please help me solve this problem :-)

  Original title: optical drive not recognized...

  Hello

  Please contact the Microsoft Community.

  You have a problem with the driver DVD being missing on the computer. It can be difficult when something that is important to you does not work as expected. It's pretty simple and we're here to help you solve the problem. We work as a team and get this sorted out.

  Please answer these questions-

  (1) that you get an error message or error code?

  (2) did you have performed the steps in troubleshooting?

  (3) have you made changes on the computer before the show?

  I would like more information about the issue.

  Method 1-

  I wish that you are running the fixit-

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2-

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.
  Back up the registry - http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  I would have you look at the article-

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116#top

  Let us know if you have other questions about Windows in the future. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.

  Thank you.

• Failures/intermittent problems with Optiarc DVD +-RW AD - 5560 has

  I have an Inspiron 1720 laptop running Windows Vista. June 1 the DVD drive was declared missing. The Device Manager said "this device cannot start. Code 10. " Looking for solutions? "Could not load driver software. A chat with technical support solves the problem by taking control of my computer and do something in the system registry.

  Two weeks later I couldn't eject the CD that had just been snatched. Restart solved that problem.

  Today, the original problem described above reappeared.

  Technical support advised that, so that they can keep fixing these problems Dell will not replace the disc if the warranty does not expire until October.

  Everyone knows the same problem with this drive and what do I do to fix this?

  
  

• Equium L20-197: Problems with CD/DVD Drive Acoustic Silencer?

  Hey there...

  Recently, I used the small button of software called "CD/DVD Drive Acoustic Silencer" to calm the CD player while a CD is playing.

  Before that, a DVD would play well... now... a wil DVD stutter, it is in ANY player. WinDVD5, Windows Media etc... I clicked on 'Normal mode' hibernated, rebooted, turned off... nothing seems to work...

  DVD jump again... any help on this?

  Hello Danny

  What model of laptop you have exactly? Was this software already preinstalled on your device, or you install on your own?

  Try to use the system restore utility and restore the system to an earlier time. I put t know if this will help but you can try it.

• A problem with my DVD driver

  a few dayes a go, my dvd driver stoped working, it cannot recognize a disc more

  And when he recognize it, gives me the message "that the CD/DVD is not compatibile and asks me to enter a new name to the disc for FORMATE it tis is second."

  Thirdly, if he saw the disc, read, when I pull the driver, the LABEL still stick (i men if the album nsme was plapla, afer, take driver disk label must becom back - CD-DVD-ROM - but it does, its plapla yet)

  Hello
   
  1. don't you make changes before the show?
   
  We recommend that you download and run the automatic Troubleshooter to find and fix errors in CD/DVD. To do this, visit the following Web site and download and run the Troubleshooter: http://support.microsoft.com/gp/cd_dvd_drive_problems
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• problem with the DVD drive when I installed win 7

  When I installed win 7, my dvd player appears, but when I eject it then I have at the time he works in it for a minetus of serval he disappeared again

  Thanks for responding, but I remedy upon entering the acer site, I downloaded the chipset and sata driver

  Note: a lot of people who have even my acer pc 5332 aspier if they install win 7 I advise them to follow my advice

• problem with TSSTcorp DVD +-RW Drive SN - 208BB driver

  Hi I have a laptop Inspiron Windows 8, only about a month and the DVD continued to show.  I put a cd or dvd and shows nothing.  He makes noises but doesn't show anything.  I ran a material and problem solving devices and it says there is a problem with the above drive and the USB-drive IF port.  I select apply this fix, but it says it can't be fixed and the driver must be reinstalled.

  Ive tried to find this driver on the dell website, and I can't seem to find it.  I think it's a Toshiba product but am really stuck now.  Can anyone help? :(

  Hmm, well I went into Device Manager, uninstalled and it did something and came back!  I tried the same thing with the USB driver, I had trouble with, but who did not return :/  Hmmmm...

• Having a problem with my DVD player with regard to media playback

  Hello

  I have recently had problems with my DVD ROM read drive media correctly, when I put in a computer game (lets say Star Craft 2 as an example at random) Autorun makes me up some options and says it's an image and request either 1.) Open the files and view them, or 2.) See all photos in Windows and some other similar options.
  It will not recognize the game as a game and will not bring up the menu to install the game or whatever it is, sorta solve this problem I put the automatic run settings so that it opens files in the photo (since it is the software game image processing) and once he opens the folder I click on the installation program manually.
  I checked my driver to ensure that it is up-to-date.
  For any help or suggestion will be welcome.

  SOLVED!

  I found out with a little research it was Vista blocks the autorun.inf files in games and keep them to read and run the .exe files automatically and so he held a photo, thank you for the help and suggestions.

• Problems with the DVD on Pavilion dv6-2010sa

  HP Pavilion dv6-2010sa laptop computer (under Windows 7 x 64), I bought less than a week ago.

  I started the disk recovery software to back up my OS in the event of future disasters.

  I used a DVD + disc, so it would take 3 discs to do the recovery disks.

  First DVD completed successfully. Software asked me to enter the disk 2.

  This is where I started to have problems.

  Drive recovery software couldn't recognize my blank dvd +.

  The drive makes a lot of noise, but then stopped making noise.

  I tried a few other DVDs +, but to no avail.

  I rebooted the computer laptop and tried but same problem.

  So I tried to play a dvd movie to see if it was the disk recovery software or the dvd player.

  He would not play a dvd movie.

  I also tried to play an audio CD but the same problem.

  The drive icon appears in Windows Explorer, but does not display any info (or open the CD / DVD) when I have a CD or a DVD in there.

  So it seems to be a problem with the DVD-> grateful not any CD / DVD

  If someone can advise?

  PS. I searched the driver DVD (so I could Reinstall driver) but the HP Web site does not contain the driver for 2010sa (DVD software only)

  Thanks in advance

  Gary

  Problem solved.

  Uninstall the device dvd player:

  -Device Manager > do a right-click post dvd/cd player > uninstall the device

  Restart the laptop and OS will reinstall the driver and the DVD/CD drive should start working again (well this is what has happened to me)

• Problem with still DVD CS6. Cancellation writing disc

  Hello. I need help - I have a problem with Encore DVD CS6. When the DVD disc is written the end of the process program cancel displays this text: "Still could not complete the operation due to an error in hardwar (detection code 40902)" it is in mac os. In windows, the problem is the same but the detection code is 300200. What is it?   Disk space is sufficient.

  As a test, generate an image rather than burn them to a disc.

  Sense errors are usually, but not always material.

  You use the same drive (external?)? Are you using the same disks? (Sense code errors can be disks.)

  Many of us don't burn ever with still, using ImgBurn for PC or for Mac toast.

• Satellite P30 turn off - also problems with burning DVDs

  Hi Please help me.
  I had a row with my brother and it won't help.

  My Pc is only a year old and it turns off. I would say it was because of overheating, but he just did and it isn't really that hot.
  I put on the books, not on my knees, keep him away heat, crash back to the desktop.
  It makes me crazy, please, any help or advice or anything like that would be a great help.

  I also have problems with my dvd burner, always, he gets to about 17% and said that there is a mistake, thought it was the discs but surely it can be all 100 of them, I tried turning on and off but no use.
  Also the advice would be great!

  Please help a girl in need of a working Pc! Who does not know a lot of technical stuff!

  Hello

  Overheating problems usually occur because the cooling module cannot work properly.
  Fans are unable to work because of the dirt and dust inside the laptop.
  The best way to clear the fans is to use the vacuum cleaner.

  On the problems of DVD writer: well, it's not easy to say why it happens. Have you checked media dvd from different manufacturers? Many CD/DVD media works differently, and you should check it out.
  In addition, there is a problem with the burning software. I put t know what application you're using, but you should try to use Nero. It's very nice software and I m very happy. Check it out

• Problem with new HARD drive and Qosmio Player installation

  Hi all
  I hope someone can help, I had my Qosmio for 2 1/2 years now and recently had a problem with the hard drive. I decided to replace the hard drive, because it was the fastest solution. The problem I have now is that I can't receive TV on media center. I tried to install qosmio player at the disk to see if it made any difference, but when I run the provided recovery disc software tells me that there is not enough disk space! The laptop came with a 60G hard drive and the new HARD drive manufactured by the same manufacturer is a 150 GB, can someone help me out with this would be appreciated.

  Thank you
  ED.

  Have you tried to install Qosmioplayer initially, then on operating system? If I remember well, on this first portable Qosmio, it was very important to install Qosmioplayer initially.

• My computer Toshiba Satellite keeps the 'blue screen' and that is to say that it is caused by "a problem with a USB driver. How can I fix it?

  Resolve a problem with a USB driver

  You have received this message because your universal serial (USB) bus driver caused a stop error, also known as a blue screen error. This error means that the computer has stopped abruptly to protect against potential corruption of data or loss.

  What is a driver?

  A driver is software that allows your computer to communicate with hardware or devices. Without drivers, the hardware you connect to your computer (for example, a video card or a webcam) may not work properly.

  The recommended steps that follows can help to eliminate this problem, or at least reduce its frequency. Try them in the order listed. If a step cannot solve or reduce the problem, then move on to the next.

  Steps to fix this problem

  1. Adjust your computer's power settings

     The following power settings may help reduce the frequency of this problem.

     1. Turn off the USB selective suspend setting:

        1. Click on the Start button .

        2. In the search box, type power options, and then press ENTER.

        3. Find the plan selected, and then click change plan settings.

        4. Click change advanced power settings.

        5. Double-click the USB settings , and then double-click on USB selective suspend setting.

        6. Make sure that the USB selective suspend setting is disabled. If it is enabled, click it and select disabledand then click OK.

     2. Disable power saving mode (computer portable computers only):

        1. Click on the Start button .

        2. In the search field, type power options, and then press ENTER.

        3. Under Preferred Plans, ensure that High Performance is selected, and then close the window.

  2. Look for an update of the BIOS for your computer system

     Several computer manufacturers whose computers have this problem published BIOS updates to fix this known issue. Contact your computer manufacturer to see if a BIOS update is available for your computer model.

     What is the BIOS?

     The basic input/output system (BIOS) is software built into a computer that runs when the computer is turned on. Among other things, this software starts the operating system, and supports the transfer of information between hardware devices (such as the keyboard and the monitor).

     How can I find the manufacturer of my computer?

     Click on the Start button , type msinfo32 in the start search box and press ENTER. The manufacturer of your computer is listed as the manufacturer of the system in the right pane of the system information window.

     Click here to go online to see the contact information for most of the computer manufacturers

  3. Download and install the latest updates and drivers for your computer

  It's a good idea to periodically check the updates of driver for your computer, especially if you added new hardware recently, such as a USB hub or other USB device.

  What is a USB hub?

  A USB hub is a device with multiple (USB) universal serial bus ports. USB ports are narrow and rectangular connection points to connect USB devices to your computer. A USB hub is used an Extender of port or port replicator, providing more USB ports to run from a USB connection on your computer. USB hubs can be external devices that connect to a USB port, or they can be internal devices built into your computer.

  To check for driver updates:

  1. Use Windows Update to find and install updates:

     1. Go online to Windows Update

     2. Click the check for updates in the left pane, and then click view available updates.

        What happens if I see any updates available?

        • If you see you receive updates: managed by your system administrator, you can try clicking on the link to check online for updates from Microsoft Update or Search online for updates from Windows Update, but you should maybe contact your system administrator to get the desired updates.

        • If you do not see the message above and no update is available in Windows Update after clicking on the link check the updates in the left pane, then the available updates have already been installed.

     3. Select the driver for your device updates and more updates to install.

        Note
        We recommend that you install all Important updates and recommended. These updates improve the security and stability of your computer.

     4. Click on install. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. If you recently added a new hardware device on your computer, go online to the manufacturer's Web site to see if there is an update to the driver.

  3. If you recently added a new program on your computer, go online to the manufacturer's Web site to see if an update is available.

  Steps to work around this problem

  Warning
  These measures are intended to solve a specific problem, but could do so by temporarily disabling or removing some features on your computer.

  1. Try to remove newly added USB devices

     If this issue occurs after adding a USB hub or other USB device, consider removing to see if the problem goes away. If this resolves the problem, contact the manufacturer of the device for the updates or other recommendations.

  2. Do not disconnect USB devices while the computer is to stop or go to sleep

  This problem is known to occur when USB devices are disconnected when the computer is trying to stop or switch mode to 'sleep'. This is common with cell phones, especially those with a docking station, as docking station can act as a USB hub. The frequency of this problem could be reduced by allowing your computer to completely close or completely in sleep mode before detached from its docking station or unplug it or the docking station USB devices.

  If you know which USB device is causing the problem

  It may be possible to prevent the Blue error screen by choosing the option remove the device safely in the Notification area, before putting your computer into sleep or Hibernate mode.

  1. In the system tray, click the icon to remove the device , select the USB device that you think that the origin of the problem and then click OK.

  2. Do not physically remove the USB device.

  3. Perform the action which resulted in the Blue error screen, so that was taken the functioning of your computer after the mode standby, hibernation, or, in the case of laptops, close the laptop computer or place it in a docking station.

     1. If the Blue error screen persists, it is likely that the problem is with another USB device. Try this procedure using other USB devices until you find that at the origin of the problem.

• If the Blue error screen disappeared, you have probably identified the device causing the problem. Contact the manufacturer of the device for more information on how to solve this problem, or use the option to remove the device safely to work around him.

Note
Depending on the manufacturer and model, some USB devices will become available automatically when you resume using your computer. Others will require that first disconnect you physically and then plug back in front, they will be recognized by the computer. Check the system tray to see if the USB device that you removed safely become available when you started to use your computer again. If she did not become available automatically, then physically unplug it and then plug it in again.

This is the screen it gives me. Help, please! If problem fixed, will BE AWARDED!

Hi ChayceSteffiare,

For instructions on solving problems with USB devices, see the following article:

Tips for solving problems of USB devices

To fix blue screen errors, see the following article:

Pick up the pieces after a computer crash

See also:

Optimize Windows Vista for better performance

Ways to improve your computer's performance

• SOLVED problem with my DVD/CD _

  Hello

  I have a problem with my DVD/CD. Although Device Manager says, "this device works properly.". It does not at all.

  I'm very suspicious of the cable connections. The cable has been severely pinched by my grandson. It did not close, and instead to find the cause, he forced its closure.

  So what I want to know is if I can buy the cable online and install it myself.  I have searched but cannot find a place to buy one, and although I searched on the Dell site, I couldn't find anything there either.

  Thanks for reading...

  Inspiron 5721

  Op - MS Windows 10 Home system

  Intel Core i7-3517U

  BIOS - Legacy mode

  RAM - 8 GB

  Name TSSTcorp CDDVDW SE-208DB USB Device

  I appreciate the responses and suggestions.

  I finally got my problem solved by replacing the CD-ROM unit.  I was lucky enough to get an opportunity from a computer at a price store very low. If all goes well.

  Thanks again to all.