Problem with printer or ink system error Oxc6fd0213

Similar Questions

• HP Officejet Pro 8610: Error code problem with printer or ink system

  sent a fax Monday very well and now I'm going to use printer & fax to search for these words in the window:

  "There is a problem with the printer or ink system. Stop printer, then if the problem continues contact HP. »

  I had done this several times as well as other things that HP troubleshooting suggested.

  Hi @MrsQT,

  I see that you get an error on the printer or ink system and made the suggested troubleshooting already. I'd be happy to help and find a document for you to review to make sure that you have tried everything: HP OfficeJet Printers - resolve the error 'Problem with ink system'.

  If the problem persists, I suggest to call the hotline to see if you may be able to get a discount on a newer model, or replace your printer if it is under warranty still. HP printers usually have a warranty of 1 year from the date of purchase, you can check the warranty using the following if you wish; guarantee cheque.

  If however the recommended solutions solve the issue please click on accept as Solution on this post so that others can find what worked for you.

  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on options contact HP - click Get phone number

  File number and phone number are displayed.

  I hope this helps.

• Problem with printer or ink system failure

  I have a HP Officejet 6600, and I get this message:

  "There is a problem with the printer or ink system.  Turn the printer off, then on.  If the problem persists, contact HP. »

  Well, I did it.  I have also run the hardware diagnostic tool, which had me unplug the printer and turn it back on, and I did it a couple of times.  I always get the error message.  I also took printhead of the printer and put back them in.  Does anyone have a solution that might be able to share with me for this problem?

  Thank you

  Melinda

  My problem was solved by the link in the first reaction after my post. I tried power downs and plug the tire, but following this post EXACTLY... worked. The method of pulling on the power cord of the printer with it cleared the error message and everything has worked perfectly since

• Problem with printer color ink large format 7500 has

  Having a problem with the color cartage 920XL

  I tried to print several photos of 4 x 6, where the first is fine and 1/2 way through the other, it starts to print only red

  installed 3 new cartridges, printer head cleaning color, alignment and began to print 4 x 6 photos and the same thing happened.

  Help, please

  I just bought 3 920 new (no large capacity) and was going to try a 3rd time but whated to here from you

  Thanks Mike

  Hi SchneiMB,

  Try the following solutions in the order presented to resolve the issue. When one of the solutions solves the problem, there is no need to continue troubleshooting.

  Troubleshooting print quality problems

• ERROR MESSAGE HP6700 - PROBLEM WITH THE PRINTER OR INK SYSTEM CONTACT HP

  I JUST BOUGHT A HP OFFICEJET 6700 (LESS THAN 1 WEEK), THE PROBLEM OF PRINTER OR INK SYSTEM MESSAGE, TURN PRINTER OFF THEN WE IF THE PROBLEM CONTINUES CONTACT HP. IS DISPLAYED ON THE PRINTER SCREEN. I DID EVERYTHING SUGGESTED, AND MORE MORE, BUT THIS CUSTOM MESSAGE CLEARLY.  ALL DIAGNOSES OF THE PRINTER THE PRINTER IS FINE.  THE OPERATING SYSTEM IS WINDOWS 7.

  Mahamoud,
  Your article made a walkthrough basic troubleshooting, ending with the question if the print head is repairable. Because it is not on the 6700, the article isn't really the problem.
  
  Here is the solution I found to this problem:
  I discovered that eliminating all ink cartridges allows the printer at startup (although there is a message saying the missing print cartridges).
  Putting the cartridges in a binary regression revealed that the ink has been bad. (In my case, I only got the message of failure/printer ink when the yellow cartridge was in the printer).
  Replacement of the restored cartridge the printer functionality.
  That's the good news.
  Now the bad news: for HP.
  The generic error message indicates a failure with the printer or the ink system. No differentiation. With the electronics in the cartridges (that the client pays a high price for), looks that HP could not understand how to indicate a cartridge problem. This error message is not only unnecessary, but misleading. The printer indicates only a power reset and then contact HP. There is no indication that he might be a cartridge problem, not to mention what cartridge has failed. By the way, my customer encountered this problem when you replace the color cartridges. The cartridge failed was a new replacement.
  All of the web enabled features, fax, scanning features, print included with this printer are not very useful if the user can't get the dang thing to print.
  Another problem with this printer, is that, even when you only print in b & W, the printer uses little color (ostensibly make Blacks more "BOLD"). Then, finally, a color cartridge will go low or empty, even if only B & W printing. And guess what, you can't continue to print n & B if one of the color cartridges are out of ink. Thus, HP... How is this useful printer in an office environment, where most print tends to be B & W?

  (I would add; the solution in the message of failure/printer ink cartridge cannot fix your problem if, in fact, there are a few default printer. But if the problem is in the ink system, then the troubleshooting cartridge can help you).
  I have posted similar comments on Amazon, for this printer, in the subject line: shame on you, HP.

• HP Officejet 6600: problem with the printer or ink system

  I have a HP Officejet 6600. I replaced the black cartridge with a new HP black ink cartridge. This message keeps poping up, there is a problem with the printer or ink system. Turn the printer off, then on. If the problem persists, contact HP. It gives me as two solutions. Solution 1: Reset the product. Turn the product off, and then unplug the power cord. Plug in the power cord and then press the key to activate the product. I've done this three times. Second solution: contact HP support note the error code provided in the email (I looked and it does not give me one) then he says, supported to contact Hp. go to: www.hp.com/support. Needless to say that this message keeps appearing on the screen of the printer and I can't do anything with the printer. Can anyone help with an idea? Please, I beg you.

  Hey @popcorn101,

  Welcome to the Forums of HP Support!

  I understand that you get the error "printer failure: there is a problem with the printer or ink system' on the front panel of your HP Officejet 6600 e-all-in-one printer.". Thanks for the troubleshooting steps that you received before reaching out for support, including. Right now, you have completed all the troubleshooting steps available in your efforts to solve this error in accordance with the document of support here. The failure itself is probably due to a failure of the print head. The print head is the part that the cartridges will fit. It controls the "reading" of the cartridges and put the ink on the page. If the print head does not, then the printing within your product system has failed. In this model of printer print head is a non-replaceable. Therefore, the resolution is a replacement of the entire unit.

  I highly recommend at this stage that you contact our Technical Support telephone queue for discover hardware replacement options.

  HP technical support are available by clicking on the following link:

  Contact HP support

  (1) once the page opens, please select the country in which you are located. Then, enter your HP model number on the right.

  (2) choose the 'Contact Support' tab at the top and scroll down to the bottom of the page "HP Support - contact" to fill out the form with your details.

  (3) Once finished, click on the 'Show the Options' icon in the lower right.

  (4) Finally, scroll to the bottom of the page and select 'phone number.' A file number and telephone number will now fill for you.

  I wish you good luck going forward with this!

• HP b110 printer range, try to print I got the following message: "failure ink system - error 0xc19a0003.

  I bought a HP b110 printer 1 year and there are 8 days, so is no longer under warranty. Yesterday, when trying to print, I got the following message: "failure ink system - error 0xc19a0003. I have renewed all the ink cartridges (I only use original HP) to nothing does not...

  Any ideas would be appreciated.

  Thank you.

  Hello

  As OEM HP is responsible for the good operation of the printer and their
  drivers provided. Check with HP support, their documentation online and
  drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Failure in the printer or ink systems

  What can I check after checking the unit ink and printhead on my printer IPSR 8600?  Get the error message 'problem with the printer or ink systems' have checdked ink cart. and print head.  All seem good.  Where should I go from here?

  Hello

  You have followed the steps in the link below.

  http://support.HP.com/us-en/document/c03096304

• Get the "ink system error message.

  I have a HP Officejet 6500 printer all-in-one.  I had to remove the back plate due to a paper jam and now I get a message "ink system error" evern if I turned off the machine, he unplugged and tried again. I did this several times.  Can anyone help

  I was unplugging the power of my HP Officejet 6500 printer instead of unplugging from the wall outlet in.  When I unplugged from the wall, he took care of the problem and it works fine now.

• Connected HP OfficeJet Pro 8600 Plus status reads "problem with printer."

  I could just ePrint on an OfficeJet Pro 8600 Plus replacement and them have not used for printing yet. I was in the devices page to manage the settings and change an address for one of my devices. The newly added column 8600 State reads 'Online', but also 'problem with printer '. Instructions I was referring to the display panel of the unit for Outlook2003 on the given problem. A check of the display surface showed no information, just a typical home screen. I checked through the display print and found no problems-all functionality is enabled and fully functioning. I checked then the functions of printer in the window 'Printers and devices' of all computers (all running Windows 7 Professional) on the office network. The 8600 are active and full functionality works correctly between the printer and all the computers.

  I then close the printer 8600, left for several minutes, and then lit it back and reconnected. The State says 'Problem with printer' remains in the device window HP.

  I am at a loss as to what this supposed problem can be and don't know what should be a next step. Does anyone have any advice or information that could help in this situation? It would be appreciated. Thanks in advance to those who could help

  HP support responded to my question by e-mail. I was told that the message 'Problem with the printer' is due to a bug in their system. Also said that as long as the status column indicates the printer is "Online" and everything else is fnctioning correctly, don't worry about this.

  I consider that a resolution of the post!

• I have a problem with printing on Windows Vista.

  I have HP desktop with Microsoft Vista operating system.  The printer I have is HP Laser Jet P1006.  1 months ago about the computer wouldn't print or download an attachment to an email.  I uninstalled the printer and re-installed, but the problem persists.

  What happened, it was this.  With an email (from gmail.com or hotmail.com) once I clicked 'print', the normal menu for printing that should go up.  Then I clicked 'print', the monitor would show a display of the menu "save under" and showed the formulations of XPS as 1 line and XPS Documents like the following line.  When I chose the option search for a printer and typed in the name of the HP Laser Jet P1006 printer and click "select", the system responded to that file name is not valid.

  Please explain what was wrong and how to fix these problems with printing and download of attached file.

  Hello

  Please contact the Microsoft Community.

  Have you tried to print using a different printer?

  I would have you try the steps of troubleshooting in these articles.

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/troubleshootResults/?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_e97ce00a6f76436cc859bfdeb053ce01=wsrp-navigationalState%3Daction%253Ddoclist%257Ccontentid%253DK.01.05.02&javax.portlet.tpst=e97ce00a6f76436cc859bfdeb053ce01&sp4ts.oid=3435682&ac.admitted=1402468218790.876444892.492883150

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_task=solveCategory&CC=UK&DLC=en&LC=en&product=3435684

  Note: I would first try to 'doctor HP Print '.

  If this problem is limited to the HP printer, so I'd like you to contact the respective support]-

  http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&LC=en&DLC=en&product=3435684

  We know if you need help.

• Common problem with Windows 7, what causes errors with itunes, the software adobe reader, TurboTax 12

  Is there a common problem with Windows 7, what causes errors with itunes, the software adobe reader, TurboTax 12?  I get error messages when I try to use one of these programs

  Hello

  Thanks for the reply with the details.
   
  Problem with opening PDF documents, please see the link and follow the steps in the article:
   
  Error "Windows cannot access the specified device, path or file" when you try to install, update or launch a program or file
  http://support.Microsoft.com/kb/2669244#top
  Important: Disable your antivirus or changed settings can make your PC vulnerable to viral, fraudulent, or malicious attacks. Microsoft does not recommend that you disable your antivirus software or change settings. If you need to temporarily disable your anti-virus software, you should reactivate as soon as you are finished.
   
  See the link for the question with idevices:
   
  iTunes for Windows: "Could not load the data class" or "Cannot load provider data" alert synchronization services
  http://support.Apple.com/kb/TS2690
   
  Problem with TurboTax 12, check out the links and follow the steps:
  http://TurboTax.Intuit.com/support/IQ/install-product/reinstalling-the--NET-Framework/GEN12673.html
   
  5639 error: Cannot configure the product update system
  http://TurboTax.Intuit.com/support/IQ/update-product/error-5639--can-t-configure-product-update-system/SLN12386.html
   
  http://TurboTax.Intuit.com/support/IQ/install-product/Troubleshoot-installing-and-running-TurboTax--Windows-/SLN63018.html
   
  If the troubleshooting steps above do not help, check in a new user account:
  Reference:
  http://Windows.Microsoft.com/en-in/Windows7/create-a-user-account
   
  If it works in the new user account, then the current may be corrupt user account.
  To fix the damaged user account, follow the steps in the following article:
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
   
  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• Problem with printing in format Adobe acrobat, DC

  Help

  I have can´t open the Printmenu and print my documents in format Adobe Acrobat, DC

  Since some day´s a can´t print my documents in Adobe DC.

  What I did:

  0 reinstall new driver for my printer

  1. New Installation of Adobe Acrobat DC

  2. Installation of the New Apple OS X el Capitan software.

  3. what once again deleting the installation of Acrobat and the installation of new Adobe acrobat DC.

  4. all other software can use the printer on my system.

  Important: before that I had problems with printing works I didn t have had problems.

  What can I do?

  Thank you

  Neugebauer, Germany

  Hi frankn30090339 ,

  Sorry for the inconvenience.

  You can download the latest patch that contains the resolution of this problem.

  Please see this link: failed to print in Adobe Acrobat format

  Let us know if you need additional assistance.

  Concerning

  Sarojini

• Problem with printing pdf from Adobe Acrobat Pro

  Hello

  I have Adobe Acrobat Pro 9.4.3.

  PDF-print has always worked a lot, but all of a sudden, there is some kind of problem.

  After you print a "Print to PDF" built-in excel document in MacOS or Adobes printer I have PDFs corruptet when showing them in Adobe Reader/Acrobat, but MacOS software preview shows them correct.

  So there can't be any problem with printing, but the local preview on my computer using Acrobat or Reader. I don't even use the Myriad in document police, I use Verdana.

  

  You say you use Verdana, but you're not. The error message clearly indicates that you use MyriadPro "BOLD".

  You probably recently installed Mac OS X 10.6.7 update that has a bug with OpenType PostScript as "BOLD" MyriadPro fonts. Use the Verdana or another font TrueType or PostScript, or come back to Mac OS X 10.6.6.

  Discover the problem here: http://www.tidbits.com/article/12078

• Since the last update of Firefox, I don't see a security lock when I connect to my two web sites to secure Bank so am forced to use IE and the two banks said the problem with Firefox, not their systems.

  Since the last update of Firefox (Version 4.0.1) I do not see a security lock when I connect my two web sites to secure Bank so am forced to use Internet Explorer for internet banking. I contacted the St George Bank and the ANZ Bank and both say that the problem with Firefox, not their systems. They advise also strongly me to not perform Internet banking unless the security padlock closed is visible in the window secure. The padlock is not visible when I connect secure site of PayPal. Before the upgrade, this problem did not exist and there is no when I use IE. Firefox is my favorite browser.

  The status bar everything has been redesigned, so now allows you to check if the site is secure the box to the left of the address (green, blue or plain).

  The site identity button | How | Firefox help

  Further discussion on this change mention an add-on, you can use if you really prefer to see a lock:

  Firefox 4 where is the lower right corner of padlock | Firefox Support Forum | Firefox help