Problem with Recovery Manager (recovery failed)

Similar Questions

• Problem with Lifedrive Manager on a Machine MS Vista

  I used my Lifedrive for a long time since a MS Windows XP Home Office successfully.  This summer, I got a new laptop which has Windows Vista Home Premium.  I am able to use the Palm Desktop software and hotsync for the XP desktop and laptop of Vista.  I am, however, problems with Lifedrive Manager.  Whenever I start the laptop, I get a message that the machine could not initialize "PalmOneRemoteLibrary."  I ignored the message because I could do everything I needed up to today.  When I tried to start the LifeDrive Manager (impetus provided by a message that asked that I install my photos using LifeDrive Manager), I got the PalmOneRemoteLibrary error message.

  I realize that this machine can be a relic, but I really like it, and I did a lot of use of it.  My LifeDrive machine runs Palm OS Garnet 5.4.8.  I recently put a mass of images on the internal drive using 'Training Mode'.

  Am I correct the LifeDrive Manager is inevitably incompatible with Windows Vista, and which is the source of my problem?  Any difficulty that I could try?  Any other ideas?

  Hello blue8star and welcome to the forums of Palm.

  The LifeDrive Manager application, unfortunately, is not compatible with Windows Vista.  Palm said they aren't going to release a update for the abandoned PDA.  (By the way, I have a palmOne LifeDrive and always use it often.)

  To load on the LifeDrive bulk data, you have the right idea, use the Drive Mode.

  Alan G

  Message is about: Treo 755 p (Sprint)

• satellite 2410: problem with recovery CD

  I had problems with laptop computer virus and decided to use the recovery cd

  At the end of installation, I get the message extraction failed and that there are currently no operating system on the laptop.

  How can I fix this problem?

  Hello

  check the BIOS settings? Turn on the laptop and immediately press the ESC key, load default settings and change the CONFIGURATION of the DEVICE to 'Installation of the OS' and try again!

  Second step: is your CD ok? Is there anywhere a scratch?

  Hans Bye

• Problem with recovery dvd - Win 7

  Hello

  After you perform a clean installation of Windows 10 I had problem with closing down my pc, it's a bug to win 10. So I decided to reinstall Windows 7 on my Acer Aspire M3920 of my recovery DVD made by Acer eRecovery management.

  The problem is, Setup stops and the #1 restore disc pops out after that the files were loaded from disk and is ready to begin the installation.

  This is the message: "there isn't enough free disk space on the drive for the files needed to continue the operation.

  PS: Before installing Windows 10, I deleted all the files and partitions on the hard drive. Maybe it's the origin of the problem?

  Someone who can help me?

  http://www.partitionwizard.com/Partition-Wizard-bootable-CD.html
  Download the .iso file
  then use a software to burn CD/DVD or USB flash drive and burn the .iso file
  Once completed, put the CD/DVD/USB on your PC, boot from CD/USB (maybe you need to start under the legacy if you have the UEFI BIOS)
  Press F12 on startup and choose the CD or USB
  at the level of the Office
  Select your HARD drive
  Right-click on the icon for your HARD drive and choose completely erase your HARD drive (it will erase any GPT or MBR at the disk), choose the first option after selecting the clear function.
  Exit the wizard partition, boot from the BIOS, UEFI return of the Legacy (if you have the UEFI BIOS) and boot from media erecovery.

• DV 6-6170 ee problem with recovery partition

  my restore partition does not work when I try to start by F11 shows a partition allocation failed message, I did an extra partiton tool so when the problem of recovery occurred I removed this partition and when I tried to set the partition as active I can't rely on it because it is disabled.

  in the window manager, that it shows that I have 4 partitions C, system recovery, Hp tools is true and how do I reactivate my recovery to work properly, please advice me.

  After you apply the changes - restart the laptop at least once. Then, stop and restart after 1 minute - press F11 to check if the recovery work.

• Satellite C655D - problem with recovery

  Hello
  I have the Satellite C655D-S5515 with no additional DVD.
  I want it back or fabric.
  When, during boot press 0, not getting no RECOVERY option not only choose the operating system (Windows 7 only).
  How can I make laptop recovery?

  At first, I must say that since a long time, Toshiba and many other manufacturers of laptop also, doesn t offer disk facility with new laptops. Recovery image is saved on the HARD drive and the laptop owner should create backup recovery, recovery media creation. Its operation is clearly described in the document s user manuals.

  In General, when your laptop has a factory settings and changes nothing, you should be able to begin the installation of HARD drive recovery. I don't know what the problem with your machine and what is the reason why this option is not available, but what you need now is the installation of recovery disc.

  If you don't you should be able to order it. For making this visit https://support.toshiba.com/repair?orderType=SFF

  Good luck

• M1V66UA: problem with recovery media disk drive

  my laptop is HP envy x 360 bought around December 2015(it is still guaranteed).

  Today, I had a problem with my laptop (inaccessible boot device error) and a HPteam even could not able to solve it and told me that the recovery order media disk.

  the problem is:

  I bought the laptop in the United States when I was a customer place and now I am in India .

  HP India has informed me that they will not consider my request for recovery media order disk since I bought the laptop outside the India and told me to contact them.

  My question is

  How can I order the disc of recovery in India?

  Hello

  First of all, you can download microsoft iso and burn it to DVD or USB without needing a key, so do a good job of it for future use.

  If you have a real Windows 10 installation the system map is saved as your key with microsoft, so you do not need a new.

  Once you have fixed starting problems, MAKE YOUR OWN RECOVERY MEDIA IMMEDIATELY.

  Jelly Beanstalk will find your product key for future use, but it is locked to the system board.

  Piriform Speccy and Belarc Advisor will also add your serial number for a knowledge need.

  If in doubt please ask.

• problem with Update Manager 4.1u1

  When I upgrade from Esxi host I have problem: clean failed for xxx.xxx.xxx.xxx
  SingleHostRemediate: Cannot download Vibs.error

  Help, please

  JP

  The log files that the last days would be sufficient

  Newspaper:

  Connect to https://hostupdate.vmware.com/software/VUM/PRODUCTION/main/esx/vmw/embeddedEsx/4.1.0/ESXi-4.1.0-patch04/vmware-esx-tools-light-4.1.0-2.18.582267.i386.vib with off proxy failed: error 12002 of WinHttpQueryDataAvailable for the url https://hostupdate.vmware.com/software/VUM/PRODUCTION/main/esx/vmw/embeddedEsx/4.1.0/ESXi-4.1.0-patch04/vmware-esx-tools-light-4.1.0-2.18.582267.i386.vib

  and below

  Download {323612704} job execution throws the error message: download limit of attempts reached

  It seems that you have a network problem,

  As troubleshooting step I suggest

  (1) verify that you download this vib by browser (vmware & moustapha sites should be in trusted sites).

  (2) test change the timeout value (steps in article VMware vCenter Update Manager UMDS fails with the error: error 12002 WinHttpReceiveResponse to url )

• Problem with disk management.

  To increase the size of drive, I installed win 7 64 bit from a cloned on a WD Green 3 TB hard drive backup.  When I go to disk management I have the following: Disk 0: base / system reserve 1.87 GB NTFS healthy, "C:" 2046,13 GB NTFS healthy, no Boot affected 746,52 GB.

  I could not wish 'C' in the unallocated space.  Is this possible and if so, what is the procedure?

  Thanks for the help

  There is a specific problem with windows that imposes a limit of 2 GB on hard drives. This can be overcome by using a GPT partition table, but then needs a UEFI BIOS in order to boot from it.

• Problems with the management of the CSC/Cisco (associated with SSO) site

  Dear friends,

  I came across a problem with single sign - on (SSO) used in the Cisco's Web site and CSC which begins to be more and more awkward:

  1. I visit the CSC and connect you to reply to a thread. Then I start to reply to a message.
  2. In response, I need to consult the technical documentation, guides, configuration or other documents on Cisco's Web site. In another tab in my browser, I visit the Cisco's Web site and do my search/navigation.
  3. At some point, Cisco's Web site acknowledges that I am already connected to the CSC and begins to produce URLs with the /partner/ inside component (for example in the search results). By clicking on this URL causes me be redirected to the page of connection again. This is the first question - why do I have to log in again because I am already connected and SSO is supposed to take care of this?
  4. Well, I re-enter my credentials, get connected, access the necessary document, then I go back to my post on the CSC, finish it and submit it. KABOOM - CCS quickly informs me that I am without permission to perform this action, lose my answer in the process! Logging on to the Web site (as described in step 3) Cisco obviously invalid my current session on CSC! I need to connect again to the SCC (until I do that, she considers me as a guest once again, but when I click on the login link, I suddenly make me connected without enter my credentials) and, well, write again my answer. Sometimes, a part is recoverable, but usually, it is only a small fragment.

  Would it not be possible to correct this behavior? I lost a lot of time my lost rewrite responses.

  Best regards

  Peter

  Hi Peter,.

  I wanted to give you a quick update on the two issues.

  First question:

  We are currently working on a long term and short fix for this problem. Unfortunately the long-term solution will be a drawn out effort as we begin our new data of all content in our heritage Center. The team is currently testing the short-term solution, will keep you posted on the progress that I get more details.

  Second question:

  We currently do analysis of the root causes of this problem and give you updated each week on this issue that deploy us the patch.

  Thanks a lot again for you continued support and patience.

  Sainaba.

• Problem with creative management account?

  I've been on creative cloud since 01/01/2016 (LR & PS). Last month, I receive a notice from Adobe everytime I open LR, indicating that there is a problem with my account plan and my last payment (June) has not been charged. NO explanation of what the issue actually is, I checked my card information of credit on my account plan, everything correct, even entered the details to make sure.

  Continue to receive this error notice, without any explanation, with the addition of a meter running backward until my account will cease to be active.

  I now have 6 days left.

  I was twice in contact with Adobe helpdesk, twice they promised the team counts would return to me by e-mail.

  So far - no email, no responses, don't explain - and the meter keeps running!

  Use a browser that allows cookies and pop-up windows, please contact adobe for hourly pst support by clicking here and, when it is available, click "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html

• Problems with Recovery Manager and wireless

  Hey everybody,

  I have an a HP Pavilion dv7-1245dx with Vista 64 bit.

  My HARD drive crashed after that the computer was hit. I bought a replacement hard drive, but could not use the HP Recovery Manager because my recovery disks were lost when I recently moved into a new House.

  I managed to get the Vista desktop of base up and running again, but without video card or wireless capability. To resolve this problem, I tried to re - install my drivers for hardware manually via

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2100&LC=en&cc=us&DLC=en&sw_lang=&product=3860...

  However, whenever I try to install Recovery Manager, I get say an error message: "this Setup program cannot be installed on this system, Installation with abandon!" InstallShield.

  Also, I tried to download and install all drivers wireless on the HP site, but I can't always operational wireless capability. Even after that I installed all drivers, Device Manager still does not recognize the wireless device.

  Any thoughts on solutions to these problems? Buy the HP recovery disk or install a new operating system Windows 7 would help solve these problems? Is it possible any other hardware become damaged when the computer was hit, and that is what causes these problems? Thank you.

  -NDEco

  Vidya,

  This problem solved-I had the drivers for the wireless and then updated the rest of the material from there. Thanks again for your help!

  -NDEco

• Z210: Bad support/problem with recovery of an Z210 system when changing the RAID configuration backup

  My Z210 accompanies stripped Bay RAID-0, which currently consists of 2 x 1 TB HDD where the OS partition. I want to change that in RAID-1 mirror, but as the application of TSRI does no such RAID level migration, I thought I would try another approach.

  As a solution, I'd do a backup using the Windows backup and restore application. Then, I would change the table using the Boot ROM TSRI before restoring the backup to this new array. But obviously backup 1.9 TB in a table of 932GB will not

  So, to make a backup, I firstly disabled 'System Protection' and the file 'Page '. This allowed me to reduce the OS partition to about 50 GB using disk management. Then I re - activate 'System Protection' and the 'Page file' before making the backup and the creation of a system recovery disk. This resulted in a backup of 35 GB that I stocked up on a USB external drive. And now a backup of 35 GB can fit on my reconfigured 932GB RAID - 1 mirror

  As such, I cold booted my system and during the boot process, I pressed CTRL-I to get the State of mind RAID Intel Boot ROM. you, CTRL-I've worked only if I started cold and the HP USB keyboard directly connected the first USB slot at the back of the system. The first USB slot is at the top left when you look at the back with the portrait of the tower. Connect the HP USB keyboard in USB port or in the hub of my Dell monitor does not allow me to access the ROM to Boot Intel RAID!

  HP should really study this fault

  In any case, when I could access the Intel RAID Boot ROM, I deleted the RAID-0 stripped existing and created a new RAID-1 mirror. Obviously, the process is destructive and wipe the BONES of the table but that's what my backup was to

  Then I started on the Windows system recovery disk, plugged the USB external drive and proceeded to recover my system.

  Everything worked as expected with the operating system partition uses about 50 GB. A simple trip to disk management enabled me to extend the volume to occupy the space allocated, as presented by the RAID-1 array. As such, I find myself with about 932 GB partition that appear in the windows disk management tool. After a check disk and reboot (which fixed some minor issues) all seemed well.

  But no, everything was fine

  Well that ROM boot RAID Intel sees that a mirror RAID-1 about 932 GB and the operating system sees a partition about 932 GB, both as expected, demand for Intel RST in windows States the following:

  

  I don't seem to have indication of what type of table, it is, an options to change the name of the table or an option to check the integrity of the array through the TSRI application in windows. If something is screwed

  But after the update for the application of iRST version 10.6.0.1002 Intel (the newest HP of) version 11.2.0.1006 (version Intel got very practice), the question seems to correct itself. Now the RAID, Windows boot ROM and the request of TSRI in Windows all agree that the table is indeed a mirror RAID-1 932 GB.

  

  I don't know what caused the problem, if it's related to something that was wrong with the process that I used, if she is simply resolved by reinstalling driver, or if this is a fix for a known issue that Intel has included in their questions later from the pilot.

  But what I know is that Intel has resolved a number of issues in the version 12.9.0.1001 driver (which is the latest version for the Cougar Point chipsets) compared to the old driver version 10.6.0.1002 HP has on its support page for the Z210.

  And HP seems unwavering in his lack of interest in the Intels 12.9.0.1001 test pilot and then make it available on its support page for what is a product still under warranty

  It is a mediocre service if you ask me...

  Some HP forum administrator or HP support person hide these forums should impose it in the HP management station and get it looked at. The Z210 is still under warranty for some customers and HP needs to pick up the latest drivers available to all suppliers, test them and then release them to their customers via the support page for this product. All the rest is little change us all.

  I was able to resolve the application problem Intel RST by updating to the latest v11.2.0.1006 Intel driver but it has highlighted a few points that HP should address, see linked post above.

  PS: Add this post so I can mark the thread as solved.

• Problem with recovery Partition(After i got a Virus)

  Hi all

  I use HP Envy 15 laptop with windows 7 Home premium x 64 bit installed. I don't create the recovery discs since I've had this laptop and what happened is that I had a virus on the internet but I have fixed almost all the defects of the system caused by the latter, but the main problem for me, is that it changes all the Player main file name in Virus1232 for example (d:\recovery converted d:\virus1234) and I spent hours on the internet for the names of folders and files right and I got them all but only a single file, not sure. My problem is when I enter the Recovery Manager it detects none my recovery partition (but the virus is not responsible for any deletion of file it just caused some change system) and just to talk I've also corrected the names of folders and files in the c: drive, since they are necessary also.

  

  What are the names of files I got in the D: drive: bootmgr - BT_HP.flg - CSP. DAT - DeployRp.log - HPSF_Rep.txt - language.ini. and let him file name is the one im not sure of: "HP_WSD.dat" (it's a file of size zero).

  The recoverymgrdump.txt just works & "leaving CSBRMgr::GetRPTOOLPartIndex!
  then he said to me:

  "Win32 System Info Code = 3, Message Info = the system does not have the specified path."

  and he also said:

  "CSBRMgr::HpcdFlgIsExistInUP : \WINDOWS\hpdrcu.prc does not exist."

  I don't know if this is normal, but also the deployrp.log gives me this error:

  "The package does not exist: c:\RM\Tools\DeployRp\WinPE_LangPacks\64\winpe-setup.cab.

  of course there are errors more in both files, but I guess that those who are the most important.

  
  

  So my question is: the attributes of file in the d: drive would be responsible for this error (I changed all the attributes to be hidden and read-only system)

  OR

  If anyone has a solution please tell me what to do.

  Thank you.

  
  

  You are the best to order that a set of recovery disks from HP, doi a full restore using those.

  You can order here recovery media

  http://support.HP.com/us-en/document/c00810334

  .

  Or call HP on the phone to order a set.

  U.S..
  http://welcome.HP.com/country/us/en/contact_us.html

  Everywhere else
  http://welcome.HP.com/country/us/en/wwcontact_us.html

• The urge to Ultrabook 6 problem with recovery after failure of hard drive (out of warranty)

  Hello

  Please can someone tell me if it is true that to use HP factory recovery disks, hardware must be exactly the same as when purchased.

  After hours wasted trying to get the recovery disks to work, I find myself with the same "failed to retrieve @ screen and some unnecessary lines of code."

  In reading the various posts, it seems that I have a replacement for HP HARD drive of the same type that came with the computer. If this is the case, then the links on the support pages should say this before I have pay £39 for a set of disks.

  For me, a hard drive is a hard drive. I replaced a drive fried (1 month out of warranty expires) with a good brand replacement, but larger. Disks won't load.

  However, I could load W7 form an iso file and get that to work. I need the recovery because I do not know how to configure raid which allows the QuickStart on this laptop, and I don't have the time or no further inclination to make it work.

  Partly a rant, sorry, but I'm wrong, and is there a solution?

  Concerning

  I have seen others with this problem. Unfortunately, the only working solution, I remember the top was where a guy removed the player cache Msata, ran recovery then reinstalled.

  On a single charge of Win 7 I think you could install the Intel Quick Start software, then use it to activate the quick start. I have more a laptop Win 7 with Msata to test, but I remember the software could be opened from the icon beside the system clock and used to toggle the quick start.