Problem with scanning chips string token

Similar Questions

• Problem with scanning from the new laptop with Windows 8

  I have a Photosmart C4480 all-in-One printer/scanner/copier.  Since getting my new laptop, I have problems with the analysis feature.  I installed the software CD, and think I have downloaded the drivers for this printer.

  Indicates the serial number found on the bottom: model of regulation SNPRB-0721

  I hope you have a resolution for me.

  Thank you!!!

  I've found a workaround.  If I used Windows software to scan, it works correctly.  It works just not when I use the button on the printer itself.

• HP Color LaserJet M277n MFP: HP Color LaserJet MFP M277n, no problems with scan to folder network and internet connection.

  I just bought a 277n MFP which I am running wireless. I have problems with:

  1 - the printer is connected to the internet (no problem connecting to the network and printing)

  2 - definition of networks for scanning file (this is how this problem started because I tried to update the firmware)

  1.

  Searched the forum and found some good articles. Tried to restart and change the DNS as shown without success. Other means?

  2. follow-up guide how to set up an SMB shared folder, but without success.

  I shared "\\Johans-MacBook-Pro\users\johan\documents" under OSX and did the same thing in the printer web setup. Even tried with the entrance of my user name and password. When I press 'save and test' I don't have that "the test failed. Try again. »
  Any suggestions?

  Best regards

  Johan

  Hi @Johan84,

  You can use DHCP or an IP fixed, but you will need to set the DNS.

  Disable the IPv6 setting on the printer.

  Go to the printer settings.

  Configuration of the network.

  Network services.

  IPv6.

  Turn the power off.

  These steps should help with scanning to email.

  Let me know. Thank you.

• Problem with scanning of document in PDF format for computer

  someone had a problem with the computer scanning a document to PDF from printer series wireless e-all-in-one-hp Photosmart 7525? The document will appear in My Documents, but when I try and open the document I get an error message that says that the document cannot be opened. I can scan and open the document as TIF format. I am running Windows 7 Home Premium and I just installed the printer Photosmart 7525. I uninstalled and reinstalled the printer using the CD.

  Hello

  Can you open other pdf files? Do you have Adobe Reader on your computer? Please download and install on your computer and then try to reopen the file (s):

  http://get.Adobe.com/reader/

  Kind regards.

• Problem with scanning HP f4580 printer.

  Problems with printer hp f4580 all-in-one. It prints and copies fine, but I cannot scan documents. Tried to reinstall the software package hp and nothing. When you try to scan, I get a "error detected no scanners were. Pls HELP crazy me!

  Hello

  Uninstall and reinstall your printer using the right drivers and installation on the HP Web site information.

  And there are some troubleshooting steps for her there too.

  Range of all-in-one printers, HP Deskjet F4580

  Or you can also ask in the Forums of HP's Support.

  http://h30434.www3.HP.com/PSG/

  @@@@@@@@@@@@@@@@@@@@@@@

  This can also help you:

  "Solve printer problems.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  "Solve printer problems.

  In the upper right corner, select your operating system from the menu drop-down.

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  See you soon.

• HP MFP M127fw Pro: Problem with scan/fax and adf on HP MFP M127fw Pro

  After that I faxed a couple of pages, the device does not work. Now, when I want to fax, he asks me if I want to scan from the plateau, even if I fed the ADF with the paper. When I want to scan, it says "Calibration."... "for a while, but nothing is happening then. It receives the fax and print documents. I unplugged the cable of electricity for more than 60 seconds, downloaded the new drivers from the HP site and installed, but it did not work. Could you please help?

  Best,

  Farrokh

  Hi @Habibzadeh,

  Welcome to the Forums of HP Support!

  I see that you are unable to fax and scan with your printer HP LaserJet Pro MFP M127. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I can understand the frustration you are experiencing. Whenever the printer is calibrated, it will not be able to do anything until it is complete.  We must determine why it is calibrated.

  I see that you updated the drivers, but you updating of the firmware of the printer?

  • Click here for the HP LaserJet Pro MFP M127/M128 series Firmware Update
  • Make sure that the printer is connected directly to a wall outlet (do not use a bar or a surge protector). This ensures that the printer is full on and can help this situation.

  The printer may need maintenance, please use this guide to help you determine the cause:

  • Fixing poor print quality

  You use Genuine HP Toner?
  What are the levels of toner?

  Note: HP recommends you to use genuine HP cartridges. HP does not guarantee the quality or reliability of cartridges HP cartridges refilled HP. If you use genuine HP, the following cartridges no can not solve the problem.

  If you have a faulty cartridge, it might be under warranty. To check the warranty on your ink supplies, go to hp.com/go/learnaboutsupplies, select your country/region, and then check the information of limited warranty for your supplies.

  If you have completed all the above steps and your product still has a problem, service the product.

  Contact HP for service in all countries except Asia-Pacific.
  First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
  Cost of repair out-of-warranty printers may apply.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on options contact HP - click Get phone number
  File number and phone number are displayed.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• C410a - problems with scanning and copying

  Recently bought a new computer (Windows 7 64-bit).  The old computer had the c410a Photosmart all-in-one installed and works without any problem.  PCMover to transfer files from the old computer to the new.  Had some problems at the beginning, but downloaded the drivers for the c410a and could do print from the computer.  However, it does not scan or copy.  I've uninstalled and reinstalled the software several times to drive and keep it for the same problem.

  If I try to scan or copy of the printer, I get an error message saying that I should try to scan/copy of the computer instead.  When I try to use the HP Solution Center, I get an error message that says: Hpqdirec.exe - system error - "the program can't start because libexpatw.dll is missing on your computer.  Try reinstalling the program to fix this program. "Then a second message appears that says Configuration ASF Broadcom -"system is busy and can not initialize.  Try again later. "As I said, I tried to reinstall the software that came with the printer several times and still get the same error messages.

  So, what don't get me?

  Any help is greatly appreciated.  Thank you very much.

  Well, I think that I thought about it.  When I reinstalled the software, I assumed that all software has been reinstalled.  But apparently, only the drivers were installed and not the HP Solution Center software.  Is returned on the disc, saw a button for installing additional software, and then installed the Solution Center and that seems to have solved the problem.

• HP Officejet 5740: Problem with scan after passage of a wireless network to a USB between PC / printer

  Hello

  I would like your advice about my inability to scan from my printer control panel after establishing a connection USB with my PC. Previously, it was established as a wireless printer.

  I get messages like "Scan of the computer is not activated", "connecting to the computer has been lost' & ' The HP scanning Application has encountered an internal error. Pls restart app & try again. "

  There is no problem to use the HP scanning software in my PC for scanning or printing of my mobile device functions.

  I tried different ways to solve problems for example to turn off my printer & restarted, print HP & Scan Doc, restart my PC but nothing is.

  Your advice would be much appreciated.

  Thank you.

  Hi @Chrissy_61

  Thanks for your comments.

  If it is connected via the USB port the computer Scan is on the front of your printer default.

  Go to your control panel and select "Scan to.."  your computer should be listed.

  Hope that helps!

• problem with scanning/image area for hp photosmart 2610 WIN XP

  Well well probably XP is half the problem since it is no longer supported... But I am havig problems scanning anything on my hp photosmart 2610. Area of the image go up and keeps telling me to insert my all in a disc and I evetually must use master to close the processes of HP. I tried everything to have HP on the phone (for 4 hours) and they could not uninstall and reinstall new drivers so not that I have two monitors of image digital hp running. Printing is not a problem but pulling to the top of photos and attempt at analysis of the new photos just do not work. I have the original disc of photosmart hp, but when I put it in my dvd player I get a message to put in an all in one disc I did not. I even downloaded the latest driver from HP and tried running that, but it does not say that it is alread installed... Should I just delete anything that has to do with my printet hp and then run the installation of new I removed the HP site? It makes me very nervous because I can print at least currently... If I delete everything and the installation fails, I can't live with printing capabilities. However, I want to be able to scan your photos of family, etc...

  Thanks for the help

  Robert

  Cheetah12

  Thank you for the information, he worked with a few minor changes since my system was a mess. But I would never have solved the problem without help...

  Great job

  Bob

• Problem with SCAN VIP

  Hi dear,
  
  Please help me fix this strange problem.
  After the installation of G.I. 11 g
  "srvctl config scan" returns this and I can ping the IP.
  
  [*[Grid@RAC1 ~] $ $ORACLE_HOME/bin/srvctl config scan *.
  SCAN name: sky - scan.cluster.oracle.cloud, network: 1/192.168.7.0/255.255.255.0/eth1
  SCAN VIP name: scan1, IP: /192.168.7.107/192.168.7.107
  SCAN VIP name: scan2, IP: /192.168.7.102/192.168.7.102
  SCAN VIP name: scan3, IP: /192.168.7.100/192.168.7.100
  
  and nslookup shows also 3 IP address.
  
  After a few hours of restarting I realized I have a 10 IP address and also, nslookup displays 10
  
  [*[Grid@RAC1 ~] $ nslookup *

  Sky - scan.cluster.oracle.cloud.

  Server: 192.168.7.69
  Address: 192.168.7.69 #53
  
  Non-authoritative answer:
  Name: sky - scan.cluster.oracle.cloud
  Address: 192.168.7.128
  Name: sky - scan.cluster.oracle.cloud
  Address: 192.168.7.129
  Name: sky - scan.cluster.oracle.cloud
  Address: 192.168.7.100
  Name: sky - scan.cluster.oracle.cloud
  Address: 192.168.7.102
  Name: sky - scan.cluster.oracle.cloud
  Address: 192.168.7.107
  Name: sky - scan.cluster.oracle.cloud
  Address: 192.168.7.114
  Name: sky - scan.cluster.oracle.cloud
  Address: 192.168.7.115
  Name: sky - scan.cluster.oracle.cloud
  Address: 192.168.7.117
  Name: sky - scan.cluster.oracle.cloud
  Address: 192.168.7.123
  Name: sky - scan.cluster.oracle.cloud
  Address: 192.168.7.124
  
  and of course I can communicate only with 3 IP address.
  
  Who can help me with advice.
  
  It's 2 node RAC with GNS system, SCAN, ASM and my DNS and DHCP servers is installed in the separate linux machine.

  Hello

  Try it there:

  # nslookup sky-scan.cluster.oracle.cloud
  Server: 192.168.7.69
  Address: 192.168.7.69#53
  
  Non-authoritative answer:
  Name: sky-scan.cluster.oracle.cloud
  Address: 192.168.7.114
  Name: sky-scan.cluster.oracle.cloud
  Address: 192.168.7.115
  Name: sky-scan.cluster.oracle.cloud
  Address: 192.168.7.117
  Name: sky-scan.cluster.oracle.cloud
  Address: 192.168.7.128
  Name: sky-scan.cluster.oracle.cloud
  Address: 192.168.7.129
  Name: sky-scan.cluster.oracle.cloud
  Address: 192.168.7.100
  Name: sky-scan.cluster.oracle.cloud
  Address: 192.168.7.102
  Name: sky-scan.cluster.oracle.cloud
  Address: 192.168.7.107
  
  as Grid user
  $  $GRID_HOME/bin/srvctl stop scan_listener
  $  $GRID_HOME/bin/srvctl stop scan
  $ $GRID_HOME/bin/srvctl remove scan_listener -f
  
  $ srvctl modify gns -D sky-scan.cluster.oracle.cloud -A 192.168.7.114
  $ srvctl modify gns -D sky-scan.cluster.oracle.cloud -A 192.168.7.115
  $ srvctl modify gns -D sky-scan.cluster.oracle.cloud -A 192.168.7.117
  $ srvctl modify gns -D sky-scan.cluster.oracle.cloud -A 192.168.7.128
  $ srvctl modify gns -D sky-scan.cluster.oracle.cloud -A 192.168.7.129
  
   "DONT REBOOT"
  
  After that nslookup must return only 3 IPs
  nslookup sky-scan.cluster.oracle.cloud
  Server: 192.168.7.69
  Address: 192.168.7.69#53
  
  Name: sky-scan.cluster.oracle.cloud
  Address: 192.168.7.100
  Name: sky-scan.cluster.oracle.cloud
  Address: 192.168.7.102
  Name: sky-scan.cluster.oracle.cloud
  Address: 192.168.7.107
  
  As root :
  
  # $GRID_HOME/bin/srvctl remove scan -f
  # $GRID_HOME/bin/srvctl add scan -n  sky-scan.cluster.oracle.cloud
  
  As GRID user :
  $ $GRID_HOME/bin/srvctl add scan_listener -p 
  $ $GRID_HOME/bin/srvctl start scan_listener
  

  Hope this helps
  Levi Pereira

• G0T59AV: Missing Coolsense and weird problem with graphics chip intel

  Hello

  Due to many problems I had with Windows 10 I reset my windows. After that, I downloaded all the drivers from this link. I have two problems:

  1. There is no driver for coolsense in the list.

  2. when I try to install the graphics driver intel I encounter an error that says my system does not have the minimum requirements .

  P. S.

  --------

  My address is up to date.

  I checked the intel driver with Device Manager and it says my graphics driver is up to date.

  Regarding

  Hi @massoudd3j,

  Thank you for your query.

  I understand that you updated to Windows 10 but due to difficulties, you did a reset back to Windows 7.

  You install the drivers for the DESIRE for laptop - 15 t - k100 CTO HP software and drivers , but have been unable to install the graphics drivers or locate the software feel cool.

  To install the graphics drivers download and save the appropriate driver in a location known as your office.

  Uninstall and remove the graphics drivers.

  Restart your computer.

  Now try to install the driver of the saved DOWNLOAD.

  Uninstall the software Cool sense.

  Restart your computer.

  On the page of software and the driver under "Software Solution", you will find the software Cool sense. Download and reinstall.

  To say thank you for answering please click the icon below thumbs up .

  If this solved your problem, please alert people by choosing the solution provided.

  Good luck!

• Problem with scanning from printer to PC under win8

  I have a HP Officejet pro 8600 that I moved PC on XP again PC under windows 8. having problem scanning the computer.

  Get the software error message attempts to save the scan pdf file in the directory "C:\Documents and Settings\userid\my documents" but access is denied.  There is no such directory in windows 8.

  I've uninstalled and reinstalled the software for windows 8 and run HP print and scan doctor, he says that everything is ok.  I can scan if I start it from the pc because when it gives the same error there is a way to save in a different directory.   The scanning started from the printer does not provide this option, seems to be wired, maybe an environment variable needs to be reset?

  Try using the wizard provided in the options of the Officejet.

  1. double-click on the icon of the Officejet 8600 in the office.

  • 

  2. then, select in the HP printer Assistant and look for the option Scan to Folder Wizard.

  • 

  3 follow the instructions in the wizard, also do not forget to provide the user and the password for your Windows account to allow the scanner saves the file in the folder.

  More information on > http://h71036.www7.hp.com/hho/us/en/ep/articles/scan-to-email-network-folders.html

  Hope these steps help you,

  * Click the stars KUDOS to say thanks

  * Click the accepted Solution if the answer to the question.

• Problem with scan

  Hi, I used my hp deskjet f 2480 for my laptop to another. After that whenever I try to scan an error is appear, shows "some other computer using this device to image" somethig like that. I use the HP scan diagnostic utility to solve my problem. But it's not working. Can we have solutions for this. Please please help me... I'm in big trouble...

  NB:my scaner used to work properly.before I use my laptop to another.

  Thank you

  Hello optimist123

  Try the following article. It should help to solve your problem. If you continue to have the same problem please include the computers operating systems and how the printer is connected to them.

  Another program has control of the scanner

• HP 6500 has when I click on print save as page is in place, no problem with scanning

  After restarting the computer and the printer after a break of three days, whenever I click on print, I receive a save as message.

  I ran the HP convenience store and make the message that no anomaly.

  What operating system? It seems that the printer port is set to LEAD: rather than a physical port.  In Windows 7, for example, you would click on start, devices and printers, click with the right button on the series, Officejet 6500 printer properties Ports.  If the printer is connected with USB port would be something like USB001:, for a network connection, the port type would probably be the re-discovery of the HP network or port TCP/IP Standard HP.

  Running the diagnostics to http://www.hp.com/go/tools can help solve the problem.

• Problem with the installation of token of debugging with an existing pair of record file

  Hello

  I created token of debugging with recording files successfully. The debugging token has worked well for me. My first debugging token has expired and I have created a new token of debugging the same procedure. But when I installed them on playbook it shows that is not valid. Please help me with this.

  Thanks in advance,

  Praveen

  I got it fixed. The issue was that time in the playbook was not in sync with the time system.