problem with windows server 2003 sp2

Similar Questions

• Dell PowerEdge R710 with windows server 2003 R2 is not start windows in normal mode.

  Hi Sir,

  Dell PowerEdge R710 with windows server 2003 R2 is not start windows in normal mode after upgrading the RAM to 64 GB.

  Arrangement of RAM is made 4 our 16 GB of RAM on 2 channels. I get no error message about the RAM configuration. It is booting in safe mode but not start in normal mode, his hanging during windows startup.

  Please give me guide to solve this problem.

  I thank & regards

  Ramanantsoa D

  Thanks for the reply.

  My version of windows is 32-bit Windows server 2003 Enterprise Edition Service Pack 2.

  Although I have not tried switching/EAP, I will try that and get back to you.

  And again something I have an idea of the installation of windows server 2008 R2 Standard version on this server, it will support? Please let me know Chris.

  Thank you.

• "Application has stopped working" - in windows 7 double started with windows server 2003.

  I did a system to dual-boot with windows server 2003 and windows 7 both 32 bit.

  Server works well, but in windows 7, not a single application as 'MS office', 'Adobe Reader10', "mozzila FF 17', USB modem software etc. can be installed." Application has stopped working-check online for the solution, close the program "-l' display message."

  These applications have been executed successfully on the same windows 7 installed alone, stand not to dual-boot.

  As for example, in the case of Mozilla, I get the following details of problem:

  Signature of the problem:

  Problem event name: APPCRASH

  Name of the application: Installation of Firefox 17.0.1.exe

  Application version: 4.42.0.0

  Application timestamp: 5080c0b6

  Fault Module name: Firefox Setup 17.0.1.exe

  Fault Module Version: 4.42.0.0

  Timestamp of Module error: 5080c0b6

  Exception code: c0000005

  Exception offset: 00029000

  The system version: 6.1.7600.2.0.0.256.1

  Locale ID: 1033

  Additional information 1: c828

  More information 2: c8281d65ef26473d0d73e61539f36991

  3 more information: c4b2

  Additional information 4: c4b2e9bb96fe79d0a8d8b1d891ab6cf4

  These BONES are compatible?

  What is the solution?

  Help, please.

  Thank you...

  Hi Sounak,

  Thank you very much for the detailed information.

  You did changes to the computer before the show?

  The process of installing or uninstalling a program may fail for several reasons. This article describes the following issues (click on each question for corresponding resolution):

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  How to solve problems when you install or uninstall programs on a Windows computer

  http://support.Microsoft.com/kb/2438651

  Let us know the result.

• VMware vCenter Converter Standalone 5.5.0 build-1362012 - unknown internal error trying to P2V Windows Server 2003 SP2

  I have a box of Windows Server 2003 SP2 Standard that fails to convert using vCenter Converter Standalone 5.5.0 build-1362012. After you submit the task in the wizard's GUI, I get "a general error has occurred: unknown internal error". A virtual machine is created and deleted and then a few moments later.

  Create the virtual machine

  192.168.1.201

  Completed

  Search entity by UUID

  Completed

  Search entity by UUID

  Completed

  Remote disk open read-write

  Completed

  Search entity by UUID

  Completed

  Remote disk open read-write

  Completed

  Search entity by UUID

  Completed

  Delete the entity

  SRV-cspnsn. CSPNSN.local

  Completed

  The destination is VMware ESXI version 5.5.0 build-1623387 managed by vSphere Client version 5.5.50 build-1618071. The destination data store is a 5.60 VMFS volume with block size of 4 MB, on a local SATA HDD with 923, 50GB.

  Both machines are in the same network and have no any King or firewall or ACL in switches.

  In the log file, the only error is "error"Ufa.HTTPService"] Impossible to read the application; "flow: io_obj p:0x03403f24, h:-1, < tube"\\.\pipe\vmware-converter-server-soap">, < pipe"\\.\pipe\vmware-converter-server-soap"> >, error: class Vmacore::TimeoutException (Operation timed out).

  Any help would be appreciated.

  Thanks in advance.

  Hi all

  Once the converter VMware-converter-en - 5.5.1 - 1682692 does not work, with a touch of friend uninstall the 5.5 version of Converter Standalone Client, look for the VMware converter version - 4.0.0 - 146302 and install this version to the other machine. No not that I had to be Converter, but the windows 7 Pro 64-bit.

  After this race, the Standalone Client 4.4 Converter and everything work fine.

  Now I have the P2V converted and good machine, as was the real operation!

  I thank all of you.

  Best regards

  ADAJio

• Essbase 9.3.1 and Windows Server 2003 SP2

  Is anyone Essbase 9.3.1 successfully under Windows Server 2003 SP2?
  
  The documentation I have mentions only SP1, but we would like to upgrade to SP2 providing that there is no problems to do.
  
  Thank you
  
  Svejk

  There is no problem running on SP2.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• CHM compatibility with Windows Server 2003

  I just finished creating the first version of a help with RoboHelp HTML CHM file, and it works fine on the machine, I used to write, as well as several others. When I tried the consultation on our production machine, running Windows Server 2003, I received the good Table of contents and Index, but all pages display the error "cannot display Page"standard. Right click on the page and selecting Properties said it had res://ieframe.dll/dnserrordiagoff_webOC.htm.
  
  I checked the specifications of RoboHelp, and indeed, the standard version of RoboHelp is not compatible with Windows Server 2003. However, I had assumed that this meant that I couldn't run the program on a Windows Server 2003-based computer, not that I couldn't run to the exit.
  
  This error is caused by a compatibility problem? It would help to upgrade to Server edition, or resign myself to use separate HTML files? Or is it another problem?

  Hi, Sydney, and welcome to the forum,

  The problem you described usually occurs when you view the contents of a file .chm remotely over a network and are due to security restrictions that Microsoft introduced in 2005. See this article for more information and workarounds:

  http://www.Grainge.org/pages/authoring/chm_mspatch/896358.htm

  So the solution is either to move files .chm on a local drive or to implement the registry changes that are described in the article (on your local computer and not on the Windows 2003 Server). The best way to make these registry changes is to use the free HHReg utility, which is available here:

  http://www.EC-software.com/products_hhreg.html

  To answer your question, however, I do not think that there is a difference between Windows Server 2003 and other versions of Windows as .chm files are concerned.

  Pete

• Windows Server 2003 SP2, not bootable iso

  The downloaded ISO file of TECHNET is not bootable, how can I make bootable so that I can create a virtual machine from him.  Pleae be explicit as to how I can make the ISO bootable, or, how I can use the ISO file to create a virtual withput machine it is bootable.

  I just took a glance on the MSDN web site. FFL you downloaded is "Windows Server 2003 Service Pack 2 (x 86) - CD (English)" that contains only the updated SP2 files. What you should look for is a file named for example en_windows_server_2003_with_sp1_standard.iso 'Windows Server 2003 Standard Edition with SP1 (English)'.

  André

• Wireless AP do not communicate with Windows Server 2003 box on the cable network

  I have a wired network which has 2 PC under Windows 7, 1 PC Windows XP Pro, 2 LAN printers and a Windows Server 2003 as customers.

  The network through a switch and a router Comcast of class business.

  I am trying to add a wireless network access point and when I do the AP and the box of Windows Server 2003 are unable to speak / ping each other, even if strangelyboth of devices are able to communicate with all devices and clients on the network. These two will be just talk to each other. It doesn't matter if I use an access point or wireless router. Any wireless device attached with a cable of the switch won't talk on the server and vice versa.

  Laptop wireless connected to the AP take a DHCP of the router/modem Comcast address and can get on the internet, they just can't see the server as cable customers can. Any suggestion would be appreciated to grreatly.

  Thank you

  Greg

  Hello g_gauthier70,

  Your question of Windows Server is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.

  Please ask your question in the Technet Windows Server General category.
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads
   
  Thank you

• Problems installing Windows Server 2003 on a T61

  Hello:

  I had installed Windows Server 2008 on a T61 and it was an installation smoothly with minor hickups.

  But some of the other required packages Windows 2003 Server (they do not support Server 2008 yet!). So I started to install Windows Server 2003 and that's where I found a lot of questions:

  1. I had to change the SATA in compatibility mode (Windows installation has complained that no hard drive found).

  2. I installed Windows Server 2003.

  3. I can't get the wireless network adapter to work. I tried the drivers for Windows 2000/XP on the Lenovo site, but the system does not recognize the card.

  4. the Device Manager lists the devices unrecognizable following three:

  Network controller (must be the wireless card. Properties/Details says "PCI VEN_8086 & DEV... »)

  Controller memory PCI (properties/details says "PCI VEN_8086 & DEV... »)

  Unknown device (properties/details says "ACPI\ATM1200\4 & 374CCB25 & 0")

  5. when I insert a USB key, it is recognized and a new disk is assigned. However, I have an external USB drive and when I plug that in, the system does not recognize the drive.

  Help, please.

  Vincent

  Roz:

  Yes, the wireless works on my laptop. Send me a private message and I can send you the driver that worked.

  Vincent

• Problem installing Windows server 2003 on Poweredgeedge R510

  Hello

  I want to install Windows server 2003 R2 SP2 32 bit on R510 server.its gives me the error of the disc is not present... How ever I have successfully installed windows server 2008 R2 sp1 on the same server. Yet once again, I installed server 2008 that it has been installed without any error.

  Can help me please out.why his error on Windows server 2003.

  You will need the drivers of the controller to present at the F6 prompt.  They are native to the Server 2008 R2 DVD, but not in 2003.  Download this DVD ISO to help load the drivers of the controller for your server and load the operating system: http://downloads.dell.com/sysman/cdu_1.6_core_173_A01.iso

  Kind regards

• Acrobat pro dc is not compatible with windows server 2003, I the downgrade?

  I buy Adobe Acrobat Pro DC and need to use it on a Windows Server 2003 computer. I can the downgrade yet?

  No version of Acrobat is for the server... (except Terminal Server). It's technique and license number.

  You can not downgrade retail licenses. Possibly of multi-user licenses.

• Microsoft Sync Center with Windows server 2003 and Windows 7 questions.

  I have an end user who is having an interesting question, the environment is Server 2003 and Windows 7 Pro. This end user was able to use the Center to sync several months ago and had no problems, what they remember. This user also has access (authorization) to access the other users on this network share folders. Two weeks ago, they have lost this ability, and this is where it gets interesting for me.

  When I have their Sync Center activated, I see that this issue to end users. When I turn off Sync Center, all other folders (NEB, they leave too) appear more their. As soon as I re - activate sync only Center files to end-users are available again. I tried to delete the files 'offline' and I tried to go directly to other users files directly with no luck. The only thing that seems to work is to turn off Sync Center, but the user does not like that because they want their backup files. The share is created for the redirection of "My Documents" is administered through Active Directory. I have about 60 other users who do not seem to have this problem because they are the only one who has permission and must have access to other peoples records.

  Any help or advice would be greatly appreciated

  Hi Frank,.

  As you have problems in a domain environment, please post this thread in the TechNet forum for better support.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?Forum=winserverfiles

• A problem with Windows Server 2008, Enterprise Edition

  Hi, I have a problem with ad on windows server 2008 Enterprise that when I try to install active domain services directory for me this message appear:

  
  
  http://img826.imageshack.us/img826/7508/39552832073804633241230.jpg
  
  Notice: I'm sure that password is complex and I erase and I disabled complex password policy and it appears again.
  Anyone has a solution or this problem before him

  Hello mohammedtayea,

  The question you have posted is related to Windows Server 2008, Enterprise Edition, and would be better suited to the TechNet ITPro community.
  Please visit the link below to ask your question in a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  Thank you

• After changing the administrator password in windows server 2003, I can not connect the next day why?

  After changing the password in windows server 2003, when the new password take effect?

  Hello

  In dealing with the problem with Windows Server 2003, it would be preferable to send the same in the Technet community. http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

  Hope the information is useful.

• In windows Server 2003 R2, standard edition, its CPU usage showing the use of 100%

  I have windows Server 2003 R2, standard edition, in recent weeks its CPU usage showing the use of 100%. While treated cheking, a process called 'System', showing the CPU from 97 to 98%, we have stopped other services one by one like Trendmicro and backup but none advantage, can you please help us?

  Hello

  Since you have a problem with Windows Server 2003, you can ask your question in the TechNet for Windows 2003 Server GENERAL forum.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads