Problem Z5P touchscreen (tap)

Similar Questions

• HP Touchsmart problem with touchscreen driver ect...

  Hello

  I have a big problem please help me.

  HP TouchSmart 520-1018fr desktop

  Model: H0N17EA

  I no longer Recovery Manager pour restore drivers and software under Windows 8.1 home 64 bit because I want to put the ' with touchscreen.

  HP TouchSmart 520-1018 en

  Manufacturer: Hewlett-Packard
  Maximum resolution: 1920 x 1080
  Screen size: 23.1 "(51 cm x 29 cm)
  Manufacturing date: 31/12/2001
  Aspect ratio: 16:9
  Type of video input: Signal digital DisplayPort

  I had Windows 7 home 64 bit on this PC before then I do a reset completely uninstall w 7 on this pc I wanted to have the computer naked complement that he nor more nothing on the hard drive.

  Pour Installer w 8.1 home 64-bit is now I have nothing

  not covered or the touch screen or HP update since I installed w.8.1 home 64 bit.

  I go into the device from the pc it does not find the driver to download.

  I have search the Internet to find the driver pour have new ' screen touch but cannot find the driver pour reinstall l ' touchscreen under aw 8.1.

  Thank you in advance pay help me.

  CDL

  PS: Besides the Pc reboots of it is under tension (EDF) unless I press the Start button of the computer...

  Hello
  I found the solution, that it is in the BIOS
  This good so good
  Thank you

• PROBLEM WITH TOUCHSCREEN KEYBOARD AND WRITING - LENOVO SU230 TWIST

  Hello, please request your support that I do not appear on the numbers and the symbols of the touch keyboard, only to show the letters LISTED SQUARE SMALL INSTEAD OF THESE characters, but characters that should, if someone could give me the model to overcome this drawback does not allow me to use my laptop when I use it as a Tablet

  Lenovo Thinkpad model SU230 Twist

  Hi Ricardo,

  It seems to be a problem with do not have updated or updates relevant driver/firmware. I would like to know some information about this problem so that we can help you further.

  1. have you made changes on the computer before this problem?

  2. do you get any error code or error message while starting?

  I would suggest trying the following methods and check if it works for you.

  Method 1:

  Run the hardware and devices Troubleshooter and check if that helps.

  Follow the steps to run the Troubleshooter:

  a. press Windows + W on your keyboard to move to the search option.

  b. type Troubleshooting , click Troubleshooting.

  c. now, type Hardware Troubleshooter in the option Search .

  d. click on Troubleshooting of hardware and devices and follow the prompt to run the troubleshooter.

  Method 2:

  Download the update of firmware of the touchscreen controller on the Lenovo site and check if the problem persists.

  Atmel touch tool updates firmware of controller for Windows 8 (32-bit, 64-bit) - ThinkPad Twist S230u:

  http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS035873

  Please reply with the status of the issue so that we can better help you.

• problem with touchscreen

  I use the hp Pavilion TouchSmart. I can't access the computer by using the touch screen. is it because of the place or my pc has problem with its screen?

  Hello

  Please follow the instructions below:

  http://support.HP.com/us-en/document/c03488148

  Kind regards.

• iPhone 5 s. problem SMS. Tap the screen blocked text

  Above the keyboard, there is a gray "audio box"? This means that I don't see what I am typing until it is sent.
  Is anyone know what it is and how you turn?

  This question was in fact addressed and corrected in an older version of iOS. Have you updated your device at all lately? What version of iPhone you have and which version of iOS are you using?

• want to sleekbook 41115dx: touchscreen not working not

  my touch screen doesn't work anymore.  don't know if due to the 8.1 update.  When I went through 10 hours online and HP diagnostics download driver included, computer does still no pen and touch detected on this computer.

  tried recovery to earlier point in time. all advice appreciated...

  Hi @ml1588

  Welcome to the HP Forums!

  It is a fantastic place to find answers and ideas!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I understand that your touch screen is unresponsive and you aren't sure if a Windows 8.1 update caused the problem.  You have been through 10 hours of online help and diagnostics of HP, but have not been able to solve the problem.

  You tried to do a restore, but that did not help.

  I don't know if you tried or not, but here is a link to the HP Solution and the finder update

  Here is a link to HP TouchSmart PC - troubleshooting problems of touchscreen in Windows 8 , which can also help.

  If the problem is still not resolved, you could do a recovery in factory

  Performing a recovery of HP (Windows 8) system

  There will be an option for you to back up your personal files to avoid any loss of data if you do not already have one.

  Restore files that have been supported to the top using HP Recovery Manager (Windows 8)

  You can contact HP support for assistance at any time. They can access your system remotely to help.

  Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.

  World wide phone holder

  Good luck!

• Two fingers tap right-click (ALPS, Yoga 500) - here's how...

  Hello

  I just wanted to share and in which case I need information later it's nice to be able to find it on the internet if I forgot.

  I bought a Yoga 500 14 - IBD (born to Win10 - not upgraded) as is was on sale and I thought why not I need a second machine. It's actually a very nice machine and the Pentium seems much better in daily chores that I imagined (but her as Atom - like execution but in fact it's more like just below i3)

  However not everything is rosy red. Like the 900 and probably many other laptops of Lenovo, he got a very annoying problem. NO TAP TWO fingers FOR a RIGHT CLICK ! Argh! Beyond me a deemed manufacturer manage to get two bad finger tap!

  The Yoga of 500 I got is like the low end version of the 500 (although it got FHD IPS) and that's probably why they put in a touchpad ALPS while my 900 has got a Synaptics.

  I have not found any information about to enable two finger tap, right-click on ALPS touchpads on the internet so I messed up a little round in regedit (I'm confident enough so has not been worried, worst restore values) thought why not share.

  1. open regedit

  2 Goto - HKEY_CURRENT_USER\SOFTWARE\Apls\Apoint\Gesture

  3. change the value of 2TapShow to 1

  4. change the value 2TapSupport to 1

  5. modify 2TapSetting value set at 13 decimal hex d

  6. do the same for HKEY_LOCAL_MACHINE\SOFTWARE\Alps\Apoint\Gesture

  7 restart the machine

  Step 5 is optional. You are now in the control panel of the ALPS under multi finger set what you want two finger tap to do! Most likely, you want to have in the context menu, but there are also other options if you care right click.

  This information is for Windows 10 ALPS driver v8.201.1611.252 so things are not exactly the same on your laptop and of course the use of information is at your own risk. Messing around in regedit can make operating system unusable if you make a mistake!

  - ENJOY YOUR 'NEW' TOUCHPAD! --

  Also while adjusting your touchpad settings you can adjust the speed. Diffinately scroll speed to the maximum and sensitivity to the max as well. ALPS seems to jerk and get the fantom clicks if you're the type who just slightly touching the touchpad. Affecting sensicity max and the touchpad features very well no involuntary jerkyness and click.

  Sorry for a minor error!

  I was writing this in my OneNote and discovered an error.

  Point 5 is 2TapFunc NOT setting (!) However, this doesn't mean probably much - only that you should open the ALPS Control Panel to then hit the function instead of working just after regedit and restart both with the fingers together.

  Sorry for inconvinience but the forum does not allow me to edit a post efter sometime!

• X 1 carbon TouchPad 'tap' issue

  From a T400 and T430 I used to work perfectly keys touch. Side with keyboards cela an important reason for me to buy premium priced at Lenovos on other areas of activity. And I use the TouchPad almost exclusively in particular places of clients and on the trips, which represents 80% of my work.

  With the new X 1 carbon (3448AW6) that I have a very annoying problem with ~ 70% failure in grateful 'tapping', such as mouse clicks. Wet conditions feel bad at the beginning, which is mentioned by UltraNav documentation. A few observation I find that it is pretty much the same in very dry air of winter in Europe.

  Description of the problem:

  By tapping touchpad causes the mouse pointer stirring a little left and right, as if there was a small movement - and not tapping. Sometimes it wiggles and also recongnizes look, but most of the time it isn't. With very firm tapping, this can be avoided about 90% - but is not an acceptable solution, the same thing with using the TrackPoint buttons only.

  Change the 'touch' sensitivity in the UltraNav settings does not lead to any improvement on the standard parameters, which is surprising. I guessed that the sensitivity would be the reason for all this.

  I want my reliable TouchPad behavior of the T4x0 return series. They worked reliably in humid Southeast and Asia throughout the rest of the world. Someone at - it an idea to solve this problem?

  Hi again, ixomon

  There is a latest driver that we can try to install it. This driver is the base of Synaptics driver. This driver has helped other issues where the UltraNav driver didn't, so it can provide assistance. This driver is located here.

  Good luck
  Adam

• Screen touch problems when you use the converter

  We just bought an Envy 27 tilt to our Caravan for all the good characteristics that HP has and TV

  Cause sometimes will want to run the HP converter 12v 400 watt true sine wave.

  We tried this to find a problem, the computer functioned well but the touchscreen ran a muck and did not work as usual.

  So after much googling and some reading I'd like here to answer fo HP.

  As I can't believe, I'd be the first to come on this problem and want to put it all in one in a motor home.

  What I read, it could be a matter of dirty power of the inveter, but we thought we have purchase the best brand true sine wave, we could leave our guys of battery here in Australia.

  Any advice would be received with gratitude.

  Thanks Lou, first of all for your time and on the other hand for your thoughts and advice.

  We have it finally working outside a performance of the inverter with number.

  But I have to say without any worthy of official telephone hotline support of HP.

  Lou, I'm working through several of your suggestions, pending the official response to my survey on what brand or type of UPS or UPS I should use with my desire to tilt.

  Well, it is very sad that a massive company like HP with what you would think would be a very large R & D service, cannot answer a simple question, like what type of UPS or UPS if they recommend to work with the touchscreen of the tilt.

  The poor people, I was talking to, had no idea what I was talking about, or what I was trying to do. How a computer call center peason knows not what a UPS, I can understand on an inverter, but the tech people, these are things really very similar in the different boxes.

  OK, if you have this problem with your inverter and touch screen, first of all not all inverters are equal even in the same brand that I discovered. I want to thank my provider inverter & battery for their time and for allowing me to put in place the HP Envy of tilt on the back of their store and try different UPSs, inverters and batteries.

  I'll talk about brands here, not rat on the brand, but as it may be useful to someone else in Australia in the future. It seems that my "Epower DCAC 400w 12v true sine inverter" wasn't at the height when it came to clean AC power required to operate the touch screen without problem.

  In the end, we tried a "Epower DCAC 1000w true Sine Wave 12v', really just to give it a go, thinking it would be a better to be the same brand as the unit of 400w, well it worked quite OK

  This unit of true sine wave Epower 12 v 1000w, fixed our problem with touchscreen and ran HP Envy tilt as if it is running on AC power.

  If anyone is interested for camper here, I found this configuration to draw between 4 and 5 amperes of batteries of 12v and about 41 Watts @ runing 240 volts a you tube clip.

  Well it is my experiences and the final result, I hope this helps someone else in the future, I'm sure that HP will not be able to.

  Thank you all.

• Edge 13 sleep problem win7 (intel)

  Hello

  I think I have a sleep problem with my edge. If I close the lid, I can still hear the hard drive by clicking on current time to time and CPU fan. I checked all the power settings and it should go to sleep and nothing should stop going to sleep. Case may be where the cover he never sleeps, but if I choose sleep from the start menu, it will sleep. And I checked all the places it should go sleep by closing the lid.

  Thing worries me a bit, it is that if I run in prompt command "powercfg - a" he reports this computer only supports the S3 (hybrid sleep) and S1 and S2 modes are not supported.

  Mystery solved:

  HW problem!

  A magnet located in the lower right corner of the cover of the computer, under the screen rectangle shaped box is too low!

  I tried one of my magnets "fridge" on the top of my power button and computer went to sleep state and _stayed_ in mode standby.

  * Sigh * I wonder what I should do to fix this problem? Magnetic tape to improve the weak magnet on my computer?

• Play/Pause for the SmartBand swR10 problem

  Hello

  The only question I have now with my SmartBand SWR10 is so is not play/pause my media file. Does anyone else have this problem apart from me?

  I don't have a Smartphone Sony but a Samsung Galaxy S5 and everything seems to work fine, but a problem with the tap once for the play/pause is annoying me. I can still go and return songs, but every time I type once he just stops for a split second then continues to play.

  Your comments would be greatly appreciated.

  On Z1, it works pretty well. Have you tried a reboot of your SGS5? It records all the water from the tap correctly however.

• 1/4 of the touchscreen unresponsive touchsmart 23 inches while a pc hp

  Hello, I got this pc touchsmart with windows 8 is already installed last year. yesterday I used it, and all of a sudden the quarter bottem left of the screen stopped working for the touchpad that the rest works fine. any idea ive done research and nothing seems to help.

  Hello bonecracker93,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post on how your screen touchscreen does not respond in the left corner of the screen, and I'd be happy to help you! To start, I have to ask you a few questions:

  • What is product and model number from your desktop?
  • What Windows 8 bit-version you have installed on your computer?
  • Has your computer finished all his important updates from Windows?
  • Have you updated your drivers from HP the HP SupportWizard?
  • What is a current or recent problem?

  In the meantime, I recommend that you follow this document on troubleshooting problems of touchscreen in Windows 8. This should help to return to the inactive area of the touchscreen feature.

  Please re-post with the results of your troubleshooting, as well as the information requested above. I look forward to your reply!

  Concerning

• Photosmart 5510 - part dead touchscreen

  A year and two weeks after I bought it (only two weeks out of warranty!) the right lower quadrant of the touchscreen on my Photosmart 5510 does not respond to touch. So anything that requires the use of the screen such as copying and scanning can be done (two weeks out of warranty!). The printer is not widely used. Everything works fine (e.g. WiFi printing). Y at - there a solution or is it the result of poor quality (anyone else have this problem?)

  Here is the solution! (I'm the original poster). Download the application of remote control hp all-in-one to your smartphone / tablet. This allows you to do all the important things that you should be able to do on the touch screen of the printer. I also had a problem when I changed my WiFi router you normally use the touchscreen to enter the new password. But you can do it via a USB cable to a PC. PS I agree there is a batch number (lots of people have the problem of touchscreen) but hp did not want to know!

• (Redirected) DELL Inspiron 15R - touch screen problems - Windows 8

  Hello

  I use a Dell Inspiron 15R series. She has Windows 8. I did no changes to it. All of a sudden the touch screen is not responding. I saw solutions like uninstall the driver of the touch screen and other things in this forum. But I can't seem to find the touch screen driver in Human Interface drivers in Device Manager.

  Can someone help me with this problem please?

  I had problems with touchscreen becomes inadmissible for a few seconds, but today it has completely stopped responding.

  Hi jncxavier,

  Please repost this in the laptop computer forum for faster assistance.

  http://en.community.Dell.com/support-forums/laptop/

• Two fingers tap (right click) not enabled

  Hey guys, I was wondering if someone could show me how do to activate the two fingers press the pad touch dell. I have an Inspiron 3521 and when I started using it I have to right click with my touchpad and then he stopped for some reason any. Would appreciate the help thanks. :)

  Here is the step by step solution I solved the problem for two tap finger right click with my DELL. Just follow the steps...

  1. Press Win + R to open run, type regedit and press ENTER to open the registry editor.
  2. Go to "HKEY_CURRENT_USER\SOFTWARE\Synaptics\SynTP\TouchPadSMB2cTM2382".
  3. On the right, double-click the "MultiFingerTapFlags" entry and update its value to 3.
  4. On the right, double-click the entry '2FingerTapAction' and update its value to 2.
  5. After, go to "HKEY_LOCAL_MACHINE\SOFTWARE\Synaptics\SynTP\Win10".
  6. On the right, double-click the "MultiFingerTapFlags" entry and update its value to 3.
  7. On the right, double-click the entry '2FingerTapAction' and update its value to 2.

  It is necessary to restart.

  PS: If you do not find the "2FingerTapAction" just create a DWORD 32 bit, rename and update the value.

  I hope it works!