Problems burning on Satellite P200-s 10

Similar Questions

• Satellite P200 - HD-DVD Player Toshiba can not read HD-DVD

  Hello.

  I have a problem with my Satellite P200-1: can not read HD DVD. There is a message that says that the video may not be in an external device.

  The problem is the same if I try on the screen of the laptop or on the TV (Sony Bravia Full HD) with HDMI. I have the latest driver and software for vista sp1 installed...

  Some have an idea?
  Sorry to talk so badly...

  Published by: ADMIN

  I think I know what's wrong;

  Check this Toshiba TB document;

  [HD DVD title does not play ("unable to output the video to an external device"): http://askiris.toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=1664 788xml & sliceId = & dialogid = 41741513 & stateId = 0% 200% 20 41739828]

  To resolve this problem, you will need to update the Audio driver Realtek for Windows Vista.

• Satellite P200-1 to 4 does nothing on AC/battery

  Hi all

  I have a problem with my Satellite P200-1 to 4.
  When I connect the battery to the power adapter, the laptop does nothing (no lights, no sounds)

  When I dosconnect the battery and leave the AC in place, the system starts normally.

  I tried another battery of a friends P200-1 has 4 (that works), but in my laptop, nothing is left.

  It seems therefore that I can use the laptop on the sector now.
  One of you had a simular problem or have a solution for me?

  Thank you very much!

  What happens when you start Notepad with ca only, but when loading the battery operating system is placed in the laptop again? Battery is correctly recognized?

• Can not activate WIFI on Satellite P200-1FY

  Hello =)

  First of all, I apologize for my bad English, I will do my best to be understandable!
  So, I got a problem with my satellite P200-1FY: I can not activate the WI - FI card. I have try the combination of keys (fn + F8), and it does not work. I check the center of mobility of Vista in the Control Panel, it says that WIFI is not activated, but [I can't click on the button to activate it. | http://anonlinepieceofmymind.com/blog/images/wifi.jpg]
  I have the latest version of the driver for the wireless card, so I can't understand why it won't work. (but maybe just because I'm just a total beginner ^_^')

  Thank you for your time and help,
  Edward.

  Have you turned on the switch on the side of laptops?
  I put t know not which way the switch is present, but check it must be somewhere on the side.
  This switch must be turned on everything first, then you can use the FN + F8 key combination.

• Satellite P200 - 10 c with a problem of burning in the CD/DVD burner

  I have some problems with my DVD/CD-RW in my Toshiba P200 - 10 c (running Windows Vista Home Premium).

  When I try to burn a CD (audio or data), the software I use (listed below) shows me the progress of burning of 0% to 100% and at the end said "complete engraving process" or something like that, but * when the CD comes out (after burning) *, if I look at his face I see that it is really burnt, because I can see the area where data has been burned. But the problem seems to * when I insert the CD into the computer *, the laser of the CD/DVD-RW drive starts reading and reading and so on... made strange noises and finally, after some time, * windows detect the CD as a void (empty) CD *. And if I try to burn the CD again, the logger simply burn again on the latest burned data and so forth, for the third time, the fourth time...

  This problem only occurs when I try to burn a CD. If I try to burn a DVD, nothing is wrong, and the DVD is properly engraved.

  I already tried the following:

  -Burn a CD with NERO (version 7): same problem
  -Burn a CD with Toshiba CD creator: same problem
  -Burn a CD with MagicISO: same problem

  -Update the drivers (value package)

  -Try to play the CD in my computer (Toshiba laptop)
  -Try to play the CD on another computer
  -Try to play the CD in my audio player (with an audio CD and a MP3 data CD)
  and in all cases, the laser becomes simply crazy, you try to read the CD I burned my Toshiba laptop.

  ----
  I think (it's just what I think), the CD/DVD-RW burn the CD correctly, but do not burn the part of the disk called TOC (table of contents), I think. This is perhaps why the CD may not play in all devices... I think that devices cannot read anything at the beginning of the CD data
  ----

  Please help me... I don't know who do more...
  Need help... Anyone with the same problem?

  Hello

  Have you tried to burn data on blank CD using Vista option (do not use any other burning software)? I've done this several times and in my case works well. I have P200D.

• Re: Satellite P200 - TS - L802a Won't burn DVD on Windows 7

  I have a Satellite P200. Due to the original HDD becomes full, I installed a new drive hard more - and installed Windows 7 Ultimate on it. I can't get my DVD burner to work (TS-L802a). The DVD player is fine because if I put the old hard drive back (Vista) it works perfectly. I have the 6.1.7601.17514 (TF32) firmware installed. I tried to upgrade to the WinVup2_L802A_RATO35 however the installer does not recognize that there is a DVD player - even if it will read DVDs without problem. It says update is not available and the Start button is grayed out.

  I searched high and low for a solution and I'm out of ideas. Can anyone offer a solution please? Thanks in advance.

  NB: I have not upgraded from Vista - I bought Windows 7 to install on new hard drive.

  Hey,.

  > even if it will read DVDs without problem
  This means that DVD burning function is affected, but you can play DVDs without problem, right?

  Well, this could be also related to the brand of DVD. This DVD you use for burning discs?
  I m using the DVD - R Verbatim and TDK. The two brands works fine on my laptop.

  What burning software do you use? Have you tried with CD Burner XP?

• Satellite P200 - problem with the use of disk HARD original as external drive

  I've been pulling on my hair for a month now and could do with help

  I have a Satellite P200 series PC laptop and have recently updated from the 200 GB for a pair or 320 GB HARD drive. No problem

  The question I have is that the old drive of 200 GB system I am unable to use it in any other machine or according to and external storage device.
  The original secondary disc works fine few matter where I use it... (In my PS3 at the moment)

  When I install the orgional system drive in my laptop and rebuild windows it it still works 100%.
  Hance a good work of 200 GB of HARD drive.
  Take it out and serve in another machine of storage that it won't - boot all I get is cyclic redundancy errors

  I formatted, low level run endless disk tools
  WD test came back with diagnostics Test::Read 11 - cable sector error!

  Even as a drive on the original laptop is the same

  All ideas taken with gratitude that I don't want to lose a good 200 GB HARD drive

  Thank you very much
  Roger

  Hello!

  The external box is maybe defective, because you said that the HARD drive works in your laptop and the PS3 without problem.
  You can test the HARD drive in another external case?

  WD test unknown to me but I always use the Drive Fitness Test:
  http://www.HitachiGST.com/HDD/support/download.htm#DFT
  With the Drive Fitness Test, you can test your HARD drive. Download the CD image, burn it to a CD and boot from it. You can then the HARD drive.
  On the same site is a user's guide if you want to know more.

  Good bye

• Satellite P200 - 14 H - problem with the software after reinstalling Vista whindows

  I have a Satellite P200 - 14 H, who bought systems Activ of Romania. I got a Toshiba DVD with an image pre-configured Windows and my driver's license windows vista Home premium. After several blue screens windows crashed after 5 days. It was a software problem. I am a network administrator and I need several virtual machines Linux vmware server Windows.

  The DVD provided with the laptop is not really suited to my needs to reinstall windows because it throws my entire hard drive and is not an option. I took a friend a DVD windows vista Home premium and using my key from the sticker on the back of my laptop I reinstalled win without deleting all of the hard drive but only the partition c. I downloaded all the drivers of your site even if I found them really hard (model PSPB6E because that model PSPB6E I don't find it anywhere) everything is good except that "Flash Cards Support Utility" and «» Hardware Setup' give me the following error: "serial number is invalid '. I don't know what to do to be able to use the function keys I knew which are installed by 'Flash Cards Support utility'.

  If it is not good that I did give me another solution that does not need to wipe entire HARD drive, but only the C drive and use the DVD that you have provided or give me access to some place to be able to download all the drivers and software that can be found on the original DVD (those above and to burn DVD and Norton internet security center and so on)

  Thank you very much and please be so kind to give me a solution quickly because I really need this computer and I am unable to use it.

  Hi Adrian

  I'll try to clarify a few things;
  First the drivers for Satellite P200 - 14 H PSPB6E series are placed on the page of Toshiba Europe and it of really not difficult to find.
  Secondly the Vista serial key, which is located on the bottom of the unit cannot be used with another copy of Vista OS! This will not work!

  You have installed the operating system Vista from the CD to friends, but you used a serial key that does not match with the Vista on CD to friends! As a result, you get the message error "serial number is invalid!"
  The utility of Flash cards is required to use the keys FN under Win Vista. It visually shows the use of the FN button.

  I would recommend another way of installation
  First, you must use the DCD from Toshiba recovery. Back up your data first!
  Then after installing the OS, create a new partition and install your favorite OS (Linux, XP, etc.)

  If you n t to use the Toshiba recovery but CD the original Microsoft CD Vista then you need to use the original series OS key that belongs to the MS Vista CD.

  Good bye

• Graphics problems in World of Warcraft on Satellite P200-123

  I bought a Satellite P200-123 to surf the net, play and for general use. I have read many reviews and chose the p200-123 because of his good grades. I play wow on a daily basis. World of Warcraft was an extension called burning crusade that came out a couple of years. When the expansion of BC the grx will all mess. Its as if there is a new effect of grx etc which does not agree with the toshiba range drivers. I get lots of polygons on the screen after being in the Burning Crusade expansion. I thought the grx was defective, so I exchanged it. Once again when I get the new laptop at home it happened again. It is a driver problem that it happens to the expansion of the BC. Ive tested it on other games and everything works fine. I want to know is we're going to have a bad selection of drviers or will they get updated.

  http://I219.Photobucket.com/albums/cc215/maltonbranch/WoWScrnShot_033108_213654.jpg

  To solve this problem, I have to change the resolution, then back to the setting I use. problems with polygons etc seems to leave for 5 minutes then the pips apear. I thought he could heat or a damaged GPU. But getting a laptop brand new just to do it again shows me his non-defective material and a driver problem.

  Ive posted this on world of warcraft forums and aparantly its a problem with the ATI driver toshiba shut down. Bottom line, I want to know if the drivers will be updated and not just old ATI modded those of toshiba. I feel ripped off the coast. In all my years of owning PCs and laptops, I never felt so disappointed by a company in terms of software support.

  Hello

  I understand you completely, especially when you play with a few new engine that requires pilots who work quite at 100%.

  Maybe you should check some 3rd third-party drivers.

  This driver have been adjusted for mobile systems, so when you try these, your problem should go away and performance are expected to increase a little.

  Welcome and good luck

• Satellite P200-1EE PSPB6E: problem of battery and Webcam

  Hiya People,

  New on the Toshiba Forums here and stuck on a problem I have with this laptop.
  I have a Satellite P200-1EE model number: PSPB6E 0GM028EN. The election House of Uni a few days ago my refuses to laptop to turn on the laptop on and happening only when I put a Power cable in.

  I took out the battery cleaned with a can of Air and put it again and it worked but the next time I did nothing happened.
  Strange thing is that, once it is running, and I take the power wire, it works fine.

  2nd problem is the software integrated Webcam won't work for me. Sometimes, and when I restarted the laptop it works fine again.
  I tried to reinstall the driver but it gives warning that the newest is already installed on my laptop.
  Am I right in thinking that its due to the new version?

  Any help or Suggestions are appreciated and thanks in advance

  Seamus

  > Laptop on and lights up only when I put a power cable. I took out the battery cleaned with a can of Air and put it again and it worked but the next time I did nothing happened. Strange thing is that, once it is running, and I take the power wire, it works fine.

  It is maybe something wrong with the battery of laptops of s?
  How old is your laptop? Guarantee is valid?

  As far as I know, the guarantee covers the battery for one year. Then maybe you should ask and ASP in your country for a control? Maybe the battery doesn't work as it should.

  > 2nd problem is the software integrated Webcam won't work for me. Sometimes, and when I restarted the laptop it works fine again. I tried to reinstall the driver but it gives warning that the newest is already installed on my laptop. Am I right in thinking that its due to the new version?

  I n t have a solution to deliver you but I assume that it s associated with the software/driver of webcam.
  You should visit the European driver Toshiba page from time to time and need to check if an update is available.

  Good luck

• Satellite P200 - unexplained MIDI file problem message

  Satellite P200 - without any sound media playing I regularly get the pdf file following poster "If you have problems with playback MIDI files please perform following steps.»

  I have no problem with the sound, DVD, MP3 etc.
  No explanation and how can I stop it?

  I always put t understand when this message appears.
  Can you please be more detailed description of the problem?

• Weird display on my Satellite P200 - 1 g 8 problem

  I bought my new laptop Satellite P200 - 1 g 8. I had some problems with the display cable.
  After that switch on and work for a few hours, the display is corrupted, or you can say distort.
  It is very difficult to explain in words. But when I restart or switch users, it starts, works very well and then again after 1-2 hours the screen suddenly corrupts.

  I've updated the drivers and Vista too, but I still have this problem. This problem comes then it distorts everything on the screen gave nothing.
  It is not overheating issue.

  If someone knows about it or anyone can help with this, thanks in advance.

  Thank you
  Cecile

  Hello

  To be honest, it is not easy to understand exactly what is happening. All you can do is install Vista with delivered recovery DVDs. This image has been tested and it should work well. If the problem persists, it must be checked by the service.

  Sorry, but I don't see another solution for you. As I have written before that it is not easy to understand exactly what is happening and what it looks like.

  This occurs if you use a specific application?

• Graphic problem on Satellite P200-13Z

  Hello

  Satellite P200-13z running 32-bit vista - intel graphics software displays + does not work because of insufficient resources + other checks indicate that the chip has no allocated memory.
  Machine runs Ok'ish on the LCD screen in mode VGA base but of course, for many programs, it is no good.

  Version 1.7, nothing in there to allocate memory for the graphics chip - as in other systems with built-in BIOS system memory for graphics.

  System has 1 GB of ram - updated 2GB with no difference.

  When I bought the laptop H/d has been deleted for reasons of safety, replaced by the new HD & reinstalled vista from a recovery P200D disk then download specific files for this machine from the Download Center, am I missing a file important?

  How do I allocate memory of the chip or do I have a defective chip / / cpu / / mb or other?

  You can not install image of P200D on P200. Both models have completely different hardware platforms. Images of recovery are individual and model specific images.
  If you want to play a little bit and test if you get it working it's Ok, but you also expect that some problems will occur.
  All with images is not so simply as you think.
  Toshiba has designed images for the use of certain models only. It will be too easy to buy a laptop and use some images on different specifications.
  I mean you pay a license and install on 10 laptops. You understand what I mean?

  If you do not have original disk recovery facilities use bare BONES Setup with disk Microsoft facilities and subsequently install all necessary drivers, tools and utilities download page following the link you have posted here. You will see that everything will work well.

• Installation of Satellite P200-144 recovery disk problem

  Model Satellite P200-144 PSPBGE

  Hi all

  Today I received a 2nd recovery disk mail via UPS directly at Arvato distribution GmbH

  Yet once there not in the exact same place as the 1st disk that I received but returned and they replaced.

  My original recovery disk was lost around the House 3 months back, which I am now myself kicking on.
  Reason for restoring factory default settings was that I wanted my pc to be clean like a cell phone factory default as it was full of registry errors.

  In any case on the problem, after that 67% of image recovery happens with the corrupted file, here is the installation proc.

  Try to rename all the letters of potential left to HDD0
  Try to rename all the letters of potential left on HDD1

  Microsoft DiskPart version 6.0.6000

  Copyright (C) 1997-2007 Microsoft Corporation.

  On computer: MINWINPC

  Disk 0 is now the selected disk

  DiskPart succeeded in erasing the disc

  DiskPart succeeded in creating the specified partition

  Partition 1 is now the selected partition

  DiskPart successfully assigned the letter of the drive on the mountpoint.

  100 percent complete

  DiskPart successfully formatted ther volume

  DiskPart succeeded in creating the specified partition

  Partition 2 is now the selected partition

  DiskPart successfully assigned the drive letter or mount point

  100 percent complete

  DiskPart successfully formatted ther volume

  DiskPart marked the current partition as active.

  Define RECO-info-guid = 4D2AE583-8FD5-4D7D-AE07-B098C1CBA1B5
  RECO-info-imagecount value = 2
  define the RECO-info-partnumber = 1
  RECO-info-numsplit value = 5
  RECO-info-bootindex value = 0

  L ' ImageX for Windows tool

  Copyright (C) Microsoft Corp. 1981-2005 all rights reserved.

  Progress: 67% 06:44 minutes

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [ERROR: 1392] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  ResourceExtractToFileByStruct: (seq. 50)-> Uncompress or WimCopyFileEx failed

  [ERROR: 1392] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  Error image restoration.

  The file or directory is corrupted and unreadable.

  Error: ImageX could not apply E:\05021XSP.swm Index 2 Weird Vista in C:!

  Is there a reverse this problem?
  My thoughs is that the image is corrupt.

  The error that you declare, is a fault with the Vista disk image cannot be applied to the hard drive.

  Which you used 2 recovery discs of different product, which would indicate that there is not support for product recovery but a defective hard drive, possibly bad sectors on the hard disk.

  If the laptop is in it duration of warranty, then give Toshiba a call for the book on deposit for a repair of the equipment.

  0844 847 8944

• Audio problems with Satellite P200-1BA

  ... Hi, first, my English is bad... :D

  I have a problem - I bought the Toshiba Satellite P200-1BA
  After I bought the laptop, I reinstalled the operating system (recovery DVD 1 time)-j' have audio, but I m missing the settings for the subwoofer + virtual surround sound + equalizer! ...
  Now I m help legal windows Vista Ultimate Edition, installed all the drivers + utility for my laptop, the Toshiba site, but I can't yet find the settings...

  Do I need an additional program for the improvement of the sound, or I need only the audio driver?
  Once more, I can't speak English, but I hope, someone of you can understand me and can help me - thanks in advance!... ;-)

  Do I have to use my subwoofer bass, virtual sound + Equalizer again?

  As far as I know Toshiba doesn't offer a special software for that. All available parameters, you can find in the Realtek HD Audio Manager in the control panel.
  Each player has own EQ options and when you listen to music with a few players check this option in the drive itself.

  That's all.