Problems connecting Motorola triumph to the computer. Unable to get the device to synchronize the music with the computer.

Similar Questions

• I have problems connecting my laptop to the TV with 2 ft HDMI connection. Whenever I try to connect "Windows cannot detect tvwizard2ft.exe" appears.

  tvwizard2ft.exe

  I have problems connecting my laptop to the TV with 2 ft HDMI connection. Whenever I try to connect "Windows cannot detect tvwizard2ft.exe" appears.

  Download and install the latest graphics driver. Visit the website of intel to get that. Once downloaded unzip the file and search for tvwsetup.exe.Run this file.

  You may also download and install .NET Framework 3.0 (SP2)

• Problem connecting, Win 7, WPA - PSK (computer think it's WEP). Managed to substitute, but now very unstable connection.

  Hello, I use Windows 7 to my computer. Here wireless signal is encrypted with WPA - PSK TKIP, but my computer could not register as such (he believes that its WEP). I managed to force it to connect, by manually adjusting for WPA - PSK with TKIP (and the correct password) in the control panel.

  However, the connection is extremely unstable. Often, he simply stops working, although the icon says that there is a link. (Note that this window of available connection has a large red cross next to the signal, because he claims that the settings do not match. He just logs occasionally when I start).

  I wonder if there is a way to solve this annoying problem. I don't know what is causing the computer to see the signal as WEP, when it clearly is WPA - PSK.

  Oh, I found what I think, it is the router in the basement: that said on it: Motorola SBS101E.

  PS: I'm not good on the technical stuff (although I understand basic concepts such as network card drivers, etc., don't ask me not to disable or install a protocol without walking me through the steps).

  Thank you!

  As I wrote, your problem is probably related to the adapter wireless in your office. Maybe it's as simple as that requires an updated driver, but it remains to be seen.

  Result of your ipconfig is quite surprising.  Because you are in a university environment, if we cannot identify a problem with your wireless adapter, you may be able to request assistance from the University of the it Department.  See also comments below on the VPN.

  Here - is more as a matter of interest than anything else - what some of your settings mean:

  Wireless network adapter

  • Your card is a Realtek RTL8188CE Wireless LAN 802.11n PCI-E NIC (Realtek RTL8188CE 1 x 1 11 b/g/n Wireless LAN PCI Express Half Mini Card Adapter, which seems to be installed on Lenovo ThinkPads).
  • Your card is automatically assigned (usually by the wireless router, but see below) an IP address of 10.92.129.20.  This address is part of what is called a 'Class A' network, which is generally only used by very large organizations (for example, a University).  This suggests that this wireless network is from University wireless access point rather than a router connected to the modem cable into your basement.

    So it is possible that the antenna on your desktop computer wireless card is not in as good a place as your laptop computer to receive the signal. It's especially if your office uses a built-in wireless adapter, with the antenna at the back of the computer under a desk and near a wall. If you try USB wireless adapter for your desktop computer (or an antenna on an extension cord) move the antenna near a window, if possible.

  • The 'default gateway' for this connection (the address of the wireless router) is 10.92.128.1, which is in the same class A network.
  • The DHCP server (which is what affects your IP address card) is 195.130.132.102.  It is a public IP address belonging to Telenet/Pandora, a Belgian Internet service provider.  In almost all wireless home networks, the DHCP server is part of the router, so your situation is very different.

  Virtual private network (VPN)
  What complicates your Internet connection is the fact that you seem to be using a VPN. This is identified as the 'card Ethernet Hamachi.' I saw many posts complaining that the Hamachi software interferes with various other network connections.  For example:

  After the installation of LogMeIn Hamachi, my continuous wireless network connection disconnected from the internet every few minutes. The wireless connection is ok, but trying to access the internet, I get a message to reset the connection.

  Once I got disabling the network Hamachi (Control Panel-> network) connection and Internet-> network connections, everything is back to normal.

  It happens on two different routers, then the router is probably not the problem.

  This happens with the wired connection.

  I use Windows 7 Home Premium SP 1 64 Bit, Hamachi 2.0.3.89, Intel WiFi Link 5300 AGN.

  LINK

  This is beyond my area of expertise.  If you are unable to determine a driver (or hardware) problem with your adapter wireless and you have installed Hamachi VPN software on your desktop and your laptop, assuming that you really need, you need to get help from the support service of some entity required or recommended use of Hamachi VPN software.

• I have a problem connecting on ebay if you use firefox, I get a message saying that the page does not not despite having cleared my cache and cookies.

  I have a problem connecting on ebay when you use firefox, it has been fine for years, but since a few days, I get a message saying that the page does not when I try to log in. I tried to clear my cookies and cache, but it makes no difference. This does not occur in google chrome and I can log on fine there so what's the problem with firefox?

  Do you also have this problem if you temporarily switch to private browsing mode?

  • https://support.Mozilla.org/KB/private+browsing
  • Tools > Options > privacy, choose the setting Firefox will: use the custom settings for the story of
  • Select: [X] 'always use private browsing mode '.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  See also:

  • https://support.Mozilla.org/KB/fix-login-issues-on-websites-requrie-passwords

• Problems connecting MacBook Pro to the television screen.

  I'm trying to connect my MacBook Pro (retina, 15 inches, end 2013) to an external TV monitor (KONKA). I bought the cord VGA and HDMI adapter. When I connect to the monitor, he doesn't always says "no signal". The screen of my MacBook, but flashes black, then normal, then black, then normal...

  What is output on the Mac?

  Which input on the TV?

  What adopting / specific adoptive parents?

  Maybe a bad adopter.

  What entry TV and cable work on another computer?

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• Problem connecting SM30-154 when the batterypower

  Hello
  I have a sm30-154, intel pro 2200BG wireless card.
  When I use my card, no connection problem 54 / 48 M with my dlink 624 router +.
  But I'm going to the power of the battery after about 5 minutes, the speed drops to 24 M and I lose connection, reset is necessary to connect again.
  Anyone know how to prevent this?

  concerning
  Bert.

  Hello

  Check the properties of the card wireless in Device Manager. On the Advanced tab you can check the settings of the wireless card power management. I don't know if this will solve your problem, but and it highest level.

• Problem connecting to Internet after the reconstruction of 600M

  I recently rebuild my 600 M/XP SP2. I downloaded the new drivers from Dell.com, and everything seems to work except for my ethernet card. It shows an error (!) on the map of Broadcom570X Gigabit Ethernet network adapters. I downloaded the Broadcom 570 X (Dell) drivers once more and I tried to update the drivers but the system hangs when you think that the update is almost finished (tried several times). And on top of this system hangs when starting (on the Windows Welcome screen) to the next immediate reboot. For more of this, I had to restart my computer in safe mode, uninstall the drivers of ethernet card. This bring me to square. An interesting, I noticed is when I restart in safe mode, the ethernet adapter shows no errors, but I don't always get internet (tried both networks of safe mode w/wo).

  Could you please help me to get this problem resolved? My dell is 2.5 years old and out of warranty.

  
  

• Having problems connecting to a client in Adobe Content Viewer. get the authentication failure

  How do people get with the content viewer Adobe?

  It is always a struggle for us. We have a customer struggling with her now - had created an adobe id, a week ago and dow nloaed the app followed the troubleshooting guide. but still no luck...

  
  

  They have to go to digitalpublishing.acrobat.com, sign in with the Adobe ID and accept the terms of use.

  Note: this must be done one desktop computers. It cannot be done from a mobile device.

• Problem connecting Dlink - the connection with this computer still only shows "Local".

  My Dlink wifi can connect to all of my other computers, with the exception of a laptop Fujitsu running Vista. Only the connection to this computer always shows "Local".

  Dlink and Fujitsu point to another, and Microsoft has no viable solution. Help!

  Hi AlLohUX,

  Thanks for posting your query in the Microsoft Community Forums.

  According to the description of the problem provided, I understand that you are unable to connect to the network on the Windows vista computer. Wifi connection Dlink says local only.

  You can follow the steps below and check if that helps you solve the problem.

  Method 1

  Try to power cycle the router and the computer and check if it helps.

  On the PC:

  Save your work and restart the machine.

  On the router or the modem:

  1. Unplug the router and the modem.
  2. Wait 30 seconds.
  3. Plug in the modem and wait for it to come to the ready state.
  4. Plug in the router.

  After you put cycle check the connection between the router and the computer.

  Method 2

  If the steps above do not help, you can reset the TCP/IP stack. To reset access the link below and either click on "Fix it for me" or follow the instructions to fix it yourself: http://support.microsoft.com/kb/299357

  (a) disable the IP helpdesk:

  (b) hold Windows key and type R, type "services.msc" (without the quotes) and press enter

  (c) scroll down to the IP assistance service, right-click on it and select Properties
  In the drop-down list box that says "Automatic" or "Manual", set it to disabled and then click 'apply'.

  (d) then click on 'Stop' to stop the service from running in the current session
  Click OK to exit the dialog box

  Also, check out the help articles and check.

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  It will be useful.

  Let us know if you encounter problems under windows in the future. We will be happy to help you.

• I'm unable to access my computer (windows 8) with my microsoft account. The password works for the connection to outlook on the internet, but not the computer.

  Original title: connection problem

  I'm unable to access my computer (windows 8) with my microsoft account. The password works for the connection to outlook on the internet, but not the computer.

  The message I get when trying to connect is simply that I cannot connect you at this time and that I should follow a link to reset the password - what I've done without result. The computer is connected to the internet.

  Hello

  Thanks for posting your query on the Microsoft Community.

  With the publication of the description, I understand that you are unable to access your computer using Microsoft password account on the machine Windows 8. I will certainly help you get this problem.

  I would be grateful if you could help me with more information:

  1. Since when you are facing this problem?

  2. What is the exact error you receive by accessing the computer?

  I would say to you follow the suggestions provided by Cliff_N responded on 7 December 2012 in the below thread Microsoft:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-security/why-cant-i-sign-into-Windows-8-with-my-Microsoft/7662ea57-c321-4bfe-84e9-fc9ebb87a44b?TM=1355519512755#_self

  Important information: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Note: When updating, the applications you have installed Web sites and DVDS is deleted. The applications provided with your PC and applications that you have installed in the Windows store will be resettled. Windows puts a list of apps removed on your desktop after you refresh your PC.

  For more information, you can consult the Microsoft article.

  What to do if you forget your Windows password

  http://Windows.Microsoft.com/en-us/Windows/what-do-forget-Windows-password#1TC=Windows-8

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• BlackBerry Smartphones Blackberry "BOLD" - problem connecting Wi Fi "unable to associate the network."

  Hello

  I am trying to configure my Blackberry "BOLD" new, I am new to the platform - from an iPhone.

  Unfortunately, I have problems to connect to my home wireless network. I tried two routers, the first being a pre-configured Tiscali (WPA encryption) and the second a Netgear mine. With the Netgear I tried to connect the Blackberry without security at all and the WEP. The Blackberry scans and detects my network, but is then unable to connect each time. Simply, I get the following message on the phone:

  Unable to connect 'Impossible to associate the network '.

  It really spoil things for me, because it is important that I can connect to the wi fi network. I had no problem before by connecting the iPhone, Nokia or Windows Mobile devices.

  Thank you in advance,

  Wendy.

  You will need to remove your battery, wait a few seconds and then put the battery in.  You'll notice that whenever your blackberry starts acting weird, remove the battery usually solves the problem. Turn off the phone, is a bit like putting your computer into sleep mode more.  Take out the battery if want to make a stop, cold-start of a computer.

• I'm unable to connect to wireless modem, the message's problem is the network cable is unplugged got new cable still

  network cable unplugged wiundows xp

  I'm unable to connect to wireless modem, the message's problem is the network cable is unplugged got new cable still

  Hello Verashanley

  Since how long did begin?
  You have added a new software or hardware to the system?
  If the issue took place recently then you can try the system restore.
  How to perform system restore in Windows XP.
  If you have recently added anything to the system (hardware or software), then remove.
  If the system restore does not then check in Device Manager and verify that the network card is considered and no errors appear.
  To open Device Manager, click Start, and then click Control Panel. Click performance and Maintenanceand then click System. In the hardware tab, click Device Manager.
  Check the type of network card you have and that you try to update the drivers from the hardware manufactures Web site.
  Also, check the connection for the network adapter. Do you see any physical damage. When you plug the NIC saw all the lights on the network card lights up? If not, then you can deal with a hardware problem and need to contact the manufacture of the system and see about obtaining the card replaced.
  Let me know the results. Thank you.

• I have a problem connecting the Netgear model No. RPV3000 Extender. So I can not see my network_EXT computer and therefore cannot link to this Netgear

  I'm AT & T PACE router connected to Internet. However, I have a problem connecting the Netgear model No. RPV3000 Extender. So I can not see my network_EXT computer and therefore cannot link to this Netgear. I tried to use another network with the name of my network_ext and provide the same passkey that my router, but it was impossible to connect to the Extender.

  I would appreciate it, if I can get any suggestion/help to bind and connect to this extension of NETGear. I have WIndow7 system on my computer.

  Thank you

  Harshad João

  First, make sure that the netgear device is not a router.  An Extender is very good.  You can't have more than one router in a network.  Also make sure that if you use the router wireless integrated into your modem, the router ONLY in use.

  There is a very specific configuration for the Extender.  It should have come with detailed instructions.  If you can't find them, call Netgear for assistance.

• Windows 7 RDP refuses the connection, this computer cannot connect to the remote computer. Try to connect again. If the problem persists...

  Error is the standard:

  This computer cannot connect to the remote computer. Try to connect again. If the problem persists...

  The error I get in Event Viewer is the layer of security event 56 TermmDD the Terminal Server has detected an error in the protocol stream and has disconnected the client.

  When I disable RDP and remove certificate from the Office is restarted remotely and then restart RDP I get one login before it fails again. It also shows only the download of the certificate on the first computer that connects to try and MOP in. If I try to another, it will not download the certificate.

  No matter if I try anyway to RDP with Windows XP, 7, Server 2003, 2008 r2 and I tried all RDP to see if it would at least somehwat work.

  All computers on the domain work for RDP is only now a single computer.

  Error is the standard:

  This computer cannot connect to the remote computer. Try to connect again. If the problem persists...

  The error I get in Event Viewer is the layer of security event 56 TermmDD the Terminal Server has detected an error in the protocol stream and has disconnected the client.

  When I disable RDP and remove certificate from the Office is restarted remotely and then restart RDP I get one login before it fails again. It also shows only the download of the certificate on the first computer that connects to try and MOP in. If I try to another, it will not download the certificate.

  No matter if I try anyway to RDP with Windows XP, 7, Server 2003, 2008 r2 and I tried all RDP to see if it would at least somehwat work.

  All other computers on the work of field for RDP is only now a single computer.

  This post on the forum of MSFT Services Office to remotely help...

  http://social.technet.Microsoft.com/forums/en/winserverTS/threads

• I have problems connecting to my wifi... it is my modem or is it the computer card that is faulty?

  I have problems connecting to my wifi... it is my router or is it the computer card that is faulty?... There are moments when the appropriate lights are on, but the router says touble shooting is out of reach... or the adapter needs to be reset...?

  If you have access to different PC, try to connect by using this PC to check if this is a problem with Wi - Fi or your PC.

  Try to reset your router and reconfigure.

  If she asks to reset the adapter to your PC, please follow the steps and do.