problems of Crysis 1 has No black screen now.

Similar Questions

• HP Compaq has a black screen at power up... The BIOS Corruption failure?

  I have a Compaq Presario CQ61 product: VM9496Q2X model: CQ61-319WM series: [edited by moderator serial number], which has a black screen when I turn on.  The wifi button stays red and the caps lock flashes twice.  I think that it indicates a BIOS curruption faliure.  I tried to reset by unplugging and removing the battery and holding the power for 30 seconds button.  I tried the f8 key and esc repeatly to power upward. I also tried pressing the windows and the B key and the power key, but nothing has worked.  Any help would be greatly appreciated!

  I'm very disappointed with the lack of response of an HP Service Technician.  I ended up taking my laptop to a computer repair shop.  My problem is that the graphics card has become dessoudée of the motherboard.  They have rearranged my motherboard and it works fine.  fix $ 79.00.

• My computer has a black screen and a cursor and there is no menu start more

  Original title: replay Vista operating system

  What I would like to know, is my computer only has a black screen and a cursor, there is no menu start, so I can stop and start a new installation of windows vista? If anyone can help please. I thank you very much for your time and have a fantastic day. Shawn

  Hello

  What changes have been made on your machine for there to be a black screen with a cursor?

  Rather than doing a clean install of your operating system, I suggest you do the following.

  Step 1:

  Remove all external devices (printer, USB flash drive), as appropriate, and start your computer again and check.

  Step 2:

  If this is little help, start your machine in safe mode and check if it starts on the desktop.

  Let us know the status of the issue.

  Azeez Nadeem - Microsoft Support [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Computer has a black screen with a message "power off, then reinstall the jumper in normal mode position."

  Original title: black screen?

  My computer has a black screen with: turn off power and reinstall the jumper in normal mode position? Help!

  Hi Miguel C.
   
  a. What is the brand of your computer?
   
  b. do you remember of any changes to your machine before the question?
   
  I don't know what motherboard you have, but some is shipped with the 'Clear CMOS' jumper in the position unequivocally. Check the manual of your motherboard for this rider and make sure that it is in the normal position.
   
  J7B1 computer configuration jumper block requires a single rider set the configuration of the BIOS Setup utility. This allows the configuration in the configuration utility BIOS, including the frequency of bus and the processor motherboard speed.
   
  Note: Do not move this jumper with the computer turned on.
  
  Warning of the BIOS:
  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
   
  I think, you'd be best to contact the manufacturer of the motherboard as this seems to be a motherboard problem.
   
  Aziz Nadeem - Microsoft Support
   

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• I hope someone can help.my p7-1054 has a black screen

  I hope someone can help.my p7-1054 has a black screen

  Hello

  Follow the steps listed in the link below

  http://support.HP.com/us-en/document/c01896806

• My computer takes 20 minutes to start and also has a black screen

  Hello world

  I have a Dell Dimension 9200 and recently every time I start my computer or it reboot, it takes 20 minutes to get to the desktop and also has a black screen. This issue has occurred only recently and I don't know what is the cause and so advice would be welcome.

  Other strange things include all my system restore points are missing and so I can't return the operating system to a previous date when it was working properly.

  And when I did a test on the hard disk, one of the internal drives have had a "Fail" result - Code 7 back. I don't know if this was caused by a virus or is the result of a mechanical failure in the hard drive itself.

  Thank you very much.

  Gordon

  

  Bev.

• NTFS check... black screen now? Help

  Yesterday my computer started to appear a message, something about a "runtime error, c:" I turned it off for the night, when I rebooted the computer, he does control of 3 phase on a blue screen and says something NTFS file and the folder C:. My office then drew up without the icons, then I restarted and it now has a black screen. Now what? And why does this happen? Thank you.

  .. He was quite well until yesterday :/

  Follow the instructions HERE.

• Re: Satellite A300D-13 has: problems starting - starts not or only black screen

  Hello, I have a Satellite A300D-13 has and the problem is, when I try to start the laptop for most, he tries to boot from the hard drive or the DVD drive but then he just stops and starts again immediately to do the same. In this case 4 or 5 times. Once it seems that it starts well, but the only thing I see is a black screen. And the keyboard does not work either.

  If I try several time with closing by pressing the power button (you know who I mean), I managed it starts normally (but such a situation is always annoying). Moreover, it seems that this happens only when I did use the laptop for a while. So maybe it has something to do with the temperature. But more or less 20 ° C in my room.

  In the Bios I have change the boot order of the sources (I can't change it much more)

  I am grateful for any kind of help.
  Thank you for your cooments in advance

  Hello

  The issue could be related to software, but also for the hardware problem.
  But first, we have to check if it s a software problem.

  You are using the original operating system preinstalled by Toshiba. Is this good?
  AFAIK the most recent series of laptop is equipped with HARD drive recovery option.
  In this case, the Toshiba Recovery DVD has not been delivered with the laptop but there is an option to create a.
  HARD drive recovery option can be used to reinstall and update the operating system.
  I would recommend to repair the operating system and reinstall it again by pressing the F8 key. The Advanced Startup menu should appear and then you must choose to repair your computer.

  This option will start the recovery procedure and the BONES to relocate again.
  Please check if a new facility will improve the situation with Notepad.
  In addition, it would be desirable to update the BIOS, if a newer version of the BIOS is available on the European driver Toshibas page.

  If this suggestion won't help you then whole notebooks material must be check by a local ASP.

• Vista starts and has a black screen with a white pointer, what should I do?

  I have a toshiba satellite laptop computer with vista.  It seems to boot into an operating system, but I don't see a white mouse with a completely black screen pointer.  Is it a problem of theme, and in this case how to fix?

  Hello

  Try following the methods provided below and see if it helps:

  Method 1:

  Try logging in safe mode and check if you are facing the similar question:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If you are able to boot into safe mode, you can try a clean boot

  How to troubleshoot a problem by performing a clean boot in Windows
  http://support.Microsoft.com/kb/929135

   

  Note: Don't forget to reset the computer to start as usual when you have found the culprit. Follow step 7 on top of the kb article.

  Method 2:

  I would say that you want to run System Restore in windows recovery mode and check if it helps. See the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Method 3:

  I suggest to update the graphics drivers on the manufacturer's Web site, click on the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Also, try to restart the computer by pressing F8 and in the advanced startup options, select Enable VGA Mode and check.

  Disconnect external devices and check

  Hope this helps,

• My PC has a black screen on normal mode

  I accidentally downloaded a virus on my windows 7 PC and all I get is a black screen to normal mode. I tried to remove this safe mode, but it could still give me the black screen. If anyone has any support it please tell me.

  Hello

  Please contact Microsoft Community.

  I understand that you are faced with the question on the black screen.

  I will definitely help you with this.

  I suggest you go through the links below:

  Refer to the suggestion given by Julie replied on January 6, 2010:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-update/Windows-7-black-screen-with-mouse-cursor-in-normal/9fea95dc-7dd6-415e-BBC2-7115311c196c

  Also check out the link below:

  Why my screen is black when I start Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  I hope this helps. Please post back with the State of the question and we will be happy to help you further.

• Computer has a black screen and does not show the normal startup logo and more

  The computer that I use usually works well, until the next day, the day that I used it, ruined everything. My computer shows not the Windows 7 logo normal at startup, but instead, a bar with green lines in movement like the ones you see in older versions (Windows Vista), but now only the bar and did no logo in it and after starting does not display. It shows a completely black screen, but it makes a noise like the sound when she welcomes you to Windows 7. I tried safe mode and disabled the NVIDIA GeForce GT 220 graphics card and the screen works, but he is stuck at 800 x 600. In addition, the start screen is always the bar. How can I fix it? (Tried updating the gpu but still displayed black screen)

  Hello Rafael,.

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the issue.

  This problem may occur because of corrupted display driver.

  I suggest to start your computer in safe mode, uninstall the display driver, restart your computer in normal mode

  mode and update driver from the website of the manufacturer of the computer display.

  Please see this link:
  Why my screen is black when I start Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Important notes:
  Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry#1TC=Windows-7

  When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Fable III has a black screen when the game restarts in the locker room.

  I loaded Fable III, but the locker room screen was black. I went to Nvidia and downloaded the latest driver for the Ge Force 7800 GTX. I have Windows 7 with an Intel dual core & 4 GB Ram. I rebooted Fable III but I still have a black screen when the game restarts in the locker room. The internet shows that my CPU will launch the game. How can I solve this problem of black screen?
  Thank you

  Original title: Fable III problem

  Hello

  Fable III is a graphically demanding game designed for next generation equipment. Your computer must have both a powerful CPU (processor) and a graphic chipset (video card). The video card must also be using the latest video card drivers for the highest level of performance and compatibility between your hardware and Fable III.

  The issue is limited to Fable III for PC? Are you facing other than display issues when reading Fable III for PC?

  You can view the following link to learn more about this:

  Fable III for PC: video and required system configuration problems

  http://support.Microsoft.com/kb/2547300

  I hope that helps!

  If you need help on this problem or any question of windows in the future let us know.

• Creating cloud has a black screen

  Updated Creative cloud today and came back to a black screen with no possibility of dialogue, photo is below.  I tried to delete the OODB or folder in the user/local folder and started in safe mode to connect, but when I came back to the normal environment, this problem is still there.  Of course the customer contact center cat care had me waiting more than two hours.  Any thoughts?

  

  So it's a combination of things.  First I had to completely uninstall all Adobe (which is unfortunate) products, and then run the cleaner, reboot.  Install CC, reboot.  Then configure compatibility 256 TIMES color put on switching to energy saving chart, then the update.  It finally worked.  But thanks for your help, it was a great help to get through all this!

• Satellite A100 has a black screen and will not charge in the Bios

  I bought a Satellite A100 - (model psaa8c-0fh00e) about 5 months ago. It was left overnight, which is not uncommon, and when I came back using about 15 hours later it was just a black screen. moved from the touch screen and keys, and nothing did. so I cold it starts and he died. I then turned it back as usual and the laptop turns on but the screen is completely black. It's not loading the normal Toshiba Bios screen.

  Now my question: If there is any way I can solve this, I am familiar with computers and parts. I don't get this cause I've ever had to reflash the wood or something like that. I am unsure of how to activate and I really want to have to take it to a shop, any suggestions would be helpful.

  Thanks in advance.

  Hi Conrad,.

  If your 100 starts normally (spinning HARD drive, optical drive LED flashes, fans turn etc.) then I suppose that your FL inverter or LCD screen is not. You can check this by connecting an external monitor to the laptop to see if it shows the normal display.

  On the other hand if there is no activity at all portable computer turn when you turn it on then I guess you have an internal hardware failure, possibly the main card, which must be checked by a Service partner authorized Toshiba since the unit is still under warranty if it is only 5 months old.

  Kind regards

• HP Pavilion 8 Windows: my hp pavillion windows 8 has a black screen after I put my password in

  After i.put my.password in expenses n then goes to a black svreen. I have tried f11, taking battery, reboot, close to the bottom.., .nothin works... Please.Help

  Hello

  Try the following.

  Boot the computer normally and log.

  Black screen, old the ctrl and alt keys and press delete.

  Select Task Manager.

  Click on file and select the new task.

  Type rstrui - also enter a tick in the box for "create this task with administrative privileges" - and click on Ok.

  When the system restore interface is loaded, choose a restore point at least 48 hours before the log - it occurs first and then proceed to the system restore.

  Kind regards

  DP - K