Problems starting Vista error: 0x8000FFFF catastrophic failure

Similar Questions

• Wireless Service disabled with error 0x8000FFFF: catastrophic failure

  My laptop has developed the following error after deleting files Apple of the system:

  Wireless disabled failed with error 0x8000FFFF: catastrophic failure.

  Network card status: media disconnected.

  HTTP, HTTPS, FTP connectivity: Passive FTP: error 12007 connecting to FTP.Microsoft.com. the server name or address cannot be resolved.

  This copied 5 times then

  Error - could not make an HTTP connection

  could not make an HTTPS connection

  could not make an FTP connection

  I had previously deleted remaining Apple files of the registry, after uninstalling gave me this error message code error "CoreFoundation.dll."

  Hello

  1. when exactly you get this error message?

  I suggest you to follow the steps from the link below and check if it helps.

  Method 1:

  Wi - Fi and in Windows network connection issues:
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2: Try to reset the TCP /IP stack:
  To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:
  http://support.Microsoft.com/kb/299357

  Method 3: Try the procedure described in the article below.

  http://support.Microsoft.com/kb/811259

  Method 4: "CoreFoundation.dll was not found" or "Apple Application Support is missing" alert: http://support.apple.com/kb/TS2211

  Hope this information is useful.

• Trying to turn on system restore, I get an error 0x8000FFFF catastrophic failure. Can anyone help?

  System Restore died in Win 7 64 bit. When you try to turn it on, I get an error 0x800FFFF.

  Hi Abe Iskander,

  ·         How long have you been faced with this problem?

  ·         You did it last changes before the show?

  Method 1: Try to perform the SFC scan on the computer and check to see if you can turn on system restore.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2: You can put your system to boot (in normal mode) to solve the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Hope this information helps.

• Getting error code = 0x8000ffff: catastrophic failure COM + internal information Services.

  {Original title: 02D4B3F1-FD88 - 11 D 1 - D 960-00805 FC79235}

  Hi, I am getting following error messages: Please advice.

  A condition occurred that indicates this COM + application is in an unstable state or does not work properly. Assertion failure: SUCCEEDED (hr) of Server Application ID: {02D4B3F1-FD88 - 11 d 1 - D 960 - 00805 FC79235} ID of Instance Application Server: {5E40DAD1-716A-4093-AFE5-EB0B8A5194E0} ServerName Application: Application of the system of the serious nature of this error has caused the end of the process. Error code = 0x8000ffff: failure catastrophic COM + internal information Services: file: f:\xpsp3\com\com1x\src\comsvcs \tracker\trksvr\trksvrimpl.cpp, line: 3000 c:\windows\system32\comsvcs.dll file version: ENU 2001.12.4414.702 shp

  Hi Joseph,.

  1. when exactly you get this error?
  2. is your computer connected to a domain?
  3. you remember to make changes to your computer before the problem?

  I suggest that you follow the steps in this article for a possible fix (if connected to a domain).
  COM +-related events may be recorded in Event Viewer when you install Windows XP Service Pack 2 and connect the computer to a domain

• Problems starting Vista Service pack 1 update - buckle boot - now

  Hello

  Vista Home Premium (SP0) ran on our home computer. Due to the loss of IE7 support on some sites, that we needed to update IE and then install Service Pack 1 (SP1). After 3 hours of nail-biting install the computer hooked to black screen. Reboot and reset revealed a restart loop. (SP1 was choice of Native Windows updater)

  This was the beginning of a strange troubleshooting. I consider myself a PC tech, but I discovered that this is not the case.

  • I started popping up in the Vista repair disk supplied with the PC, hoping to get the repair of the system than Vista point created before installing SP1. I got a blue screen after you start the DVD. STOP: 0x0000C1F5.
  • I jumped into a recovery CD UBCD4Win CD, I created a while ago with XP preinstalled runtime environment. Started good CD and read up on some forums. They asked to remove Pending.xml and another file which I can't put my finger on ATM there is no improvement to reboot loop or BSOD STOP.
    http://www.Google.com/search?q=remove+pending.XML+Vista+SP1+reboot+loop
  • I read on some forum more. I created a SystemRescueCD with a preinstalled environment location of linux. I deleted the file $Txflog. Following the instructions I can't boot the PC more: pre-launch control ok, black screen startup Windows system manager ntoskrnl.exe 0xC0000098.
    I have had no problems to start the Vista recovery DVDs. As stated in the guide that I tried to reset the system restore point created Vista before installing SP1. I get an error at the end of the restoration of the system: system recovery failed due to an unknown error 0 x 80070570.
    http://www.Google.com/search?q= \$Txflog+vista+remove+systemrescueCD
  • After a few Snort of the forum more than that I was instructed to copy system files in folder windows\system32 and drivers. However, I could not find the hal.dll file as instructed but copied the remaining files without a hitch. This has not changed the situation.
    (Stange done here, the cmd and the windows recovery environment guest is in Italian, despite the version of windows being a Dutch version. I chose the Dutch at first. is there a way I can change the language in Dutch?)
    http://www.Google.com/search?q=Ntoskrnl.exe+0xc0000098+HAL.dll+copy

  So I'm here. All possible solutions are welcome. Please ensure that they are based. I'll try to uninstall SP1 tomorrow through the Windows recovery environment guest. I do accept solutions involving a complete reinstallation of Vista. I have a Windows 7 DVD, but none touch 2nd. It's another language too (Dutch - 7 English Vista). So installation on a W7 is not a direct option.

  Please let me know something. Thank you guys!

  SP1 is not the issue.  I saw this with a lot of Dell computers at work.
  Unfortunately, the solution is a clean install of Vista with SP1 included in the installation DVD.

  If this is a Dell computer, you can contact Dell to obtain a copy of the appropriate disk Vista with SP1 (SP2) installed.

• I got the error 0x8000FFFF: catastrophic error on windows XP pack 3 service. How can I fix this? I can do everything, but can not get the computer to detect wireless networks?

  I used disc cleanup and bang this error came. I don't know how or why. I can't use internet somehow. Normally, I connect to the internet with our home wi - fi connection. But my computer now sees not all networks wireless at all. I made sure the wireless switch is on and my son checked all settings network... still nothing. I am quite at a loss to solve this problem and do not have money to take right now to a pro. Help please?

  I also got the problem devices following system infor...

  Atheros AR5007EGwireless AVG mini port network adapter driver pnpdevice I\D ROOT/GR_AVGFWMP\0002 error code by using the V & D charger

  Atheros AR81 32PCI-E FastEthernet Controller AVG miniport driver ROOT\GR_AVGWMP | ooo1 failure using the V & D charger

  iecont.dll missing file

  iecontic.dll missing file

  ieuinit.inf not available

  Proxy disabled

  Disabled Access Manager

  Thanks a lot if you can help. The computer is a netbook with a screen 10 inch aspire. It's an older version, but is running windows xp with service pack 3, I use a laptop plus old to communicate with you and will continue to do so, to read your tips, thank you again.

  E-mail address is removed from the privacy *.

  Hello Sharon,

  You did it of any material changes or software on the computer before this problem?

  You can follow this link and check if the problem persists.

  In the Windows wireless network connection problems

  Hope the helps of information.
  Please post back and we do know.

• Problem starting Vista Business

  I have a Compaq 615. A couple of days, he got more slow and slower - response time were tens of minutes. Finally I turned off. Yesterday, I tried to start it again. The first screen displays quickly, but he says then I'm locked and after that, nothing happens (in hours), cursor does not move, no answers with keyboard etc. Any ideas?

  Hello

  Run HP diagnostics, etc:

  "Tests of hardware failures (Windows 7, Vista).

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01443317&LC=en&cc=us&DLC=en

  Tests using HP PC Hardware Diagnostics UEFI
  The basic hardware Diagnostics System Diagnostics
  Tests using HP System Diagnostics
  Tests using HP Support Assistant in Windows 7 or Vista

  See you soon.

• Can I switch to windows 7 if it is impossible to start Vista error: 0xc000000e?

  original title: my OS windows vista Home premium is damaged, my computer do not start, my is... question can I update to windows 7 in these conditions?

  my screen said only: file: \windows\system32\winload.exe

  status 0xc000000e

  the selected entry could not be loaded because the app is missing or damaged

  You need a version of Vista running to upgrade it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• problems reinstalling Vista, error code 0 x 80070017

  Hi help someone can help you. I'm selling my pc and wiped the hard drive by using the drive to kill her. The problem is now when I try to reinstall, I get the error message - windows cannot install required files. The file is corrupt or missing. Make sure all files required for installation are available, and restart the installation. Error code 0 x 80070017

  Please can someone help?

  Hello

  You don't say how you try to reinstall the operating system.

  It's the opinion of their website on relocation:

  I'll be able to use my drive HARD after Active @ KillDisk erase operation?

  In order to use the HDD again you must:

  • repartition the HARD drive using standard utility like FDISK
  • reformat the hard disk using the standard utility like FORMAT
  • Reinstall the operating system using bootable CD-ROM or USB / floppy

  http://www.killdisk.com/KillDisk-FAQ.htm

  See you soon.

• Windows vista error - catastrophic failure - error occurred during automatic backup of files

  • Windows vista service pack 2
  • error 0x8000FFFF catastrophic failure code
  • update browser GOOGLE chrome
  • Run the disk check, have also partioned disks (supplied with the new laptop), but still keep on this error

  SOLUTION:

  The solution to the problem, I met is the following:

  Step 1: RESTART your computer, press F8

  Step 2: select the first OPTION (depending on the manufacturer of your computer, it may be first or second, and so on...)

  The option is: fix my (the) computer

  Step 4: It will load the same in SafeMode (just an example), select your OWN USER NAME (though more are available), log in as an ADMINISTRATOR (if you are the one)

  Step 5: It will change into a small window asking you connect by using the command prompt: check this option (this may vary according to manufacturing, but it should be there)

  Step 6: Now when you log in you should see X:\Windows\System32 >

  Step 7: Change of disk C, D or E (essentially select your disk where the OS is installed)

  NOTE: If NO leave are present select your ONE and ONLY by CAR.

  If left are, for example: D and E (D contains BONES, E contains - your stuff)

  Select drive with OS, i.e. D drive

  Step 8: After your decision to step 7, it would look like

  X:\Windows\System32\C:

  Step 9: The result would now be C:\ >

  SO BASICALLY WE ARE ACCESSING THE HDD FROM OUTSIDE

  Step 10: Type Chkdsk/r/f

  Step 11: wait for the results

  The first 3 steps will be complete as soon as POSSIBLE, the 4th and 5th stage will TAKE ABOUT 120 minutes (variable, based on the hard drive, the computer specifications and especially your processor)

  The result should tell you more about the DEFECTIVE AREAS, indexing ERRORS and similar stuff, and also they could be repaired.

  When finished: TUPE OUTPUT

  At the end of OUTPUT

  and REBOOT

  step 12: now even ONCE, go to the BACK UP CENTER, launch a NEW BACK UP, it should work :)

  NOTE: I appreciate the incredible help with MICROSOFT research, engineers who were very thoughtful and dedicated to get my problem sorted out and help out me.

  All these steps are suggestions for these engineers, NOT MY JOB: p

  KUDOS TO MICROSOFT AND HIS TEAM!

  See you soon,.

  Jay

  BTW: these guys who gave METHODS of TRIALS AND ERRORS, thanks to you also, I learned a lot.

• Error "failure 0x8000FFFF catastrophic" when running on Vista computer backup system

  Original title: you try to run the backup.
  You save stopped running, catastrophic failure 0x8000FFF error message.

  Hello

  This problem occurs because the backup process detects that the system drive is dirty.
  Windows Vista backup always includes the system as part of the backup drive. If the system drive is dirty, the backup process skips the system drive.
  and no snapshot of the system drive is created. Therefore, the backup cannot locate a snapshot of the system drive later, and the error occurs.

  Refer to this article and follow the steps to solve the problem:

  Error message when you try to perform a backup system on a Windows Vista-based computer: "catastrophic failure (0x8000FFFF)":
  http://support.Microsoft.com/kb/973558

   

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers Feedback Forum and tell us what you think.

• Get a message from catastrophic failure with error 0x8000FFFF on backup code

  Original title: I get a message of catastrophic failure.

  Error code 0x8000FFFF while trying to backup files every time. What should I do about it?

  Hi granniewilsey,

  This problem occurs because the backup process detects that the system drive is dirty.

  Windows Vista backup always includes the system as part of the backup drive. If the system drive is dirty, the backup process skips the system drive, and no snapshot of the system drive is created. Therefore, the backup cannot locate a snapshot of the system drive later, and the error occurs.

  To resolve this problem, run the disk check to fix the error on the system drive. To do this, follow the steps mentioned in the article below:

   

  Error message when you try to perform a backup system on a Windows Vista-based computer: "catastrophic failure (0x8000FFFF)".

  http://support.Microsoft.com/kb/973558

  Note: CHKDSK would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I get a failure 0x8000FFFF catastrophic when you try to do a backup, even with a new drive. Suggestions?

  I made several attempts to make my back upward, using the back to the top and Food Center. I thought the problem was the drive, so I was using brand new in packaging. The diskette formatting program, but then at some point, I get a failure 0x8000FFFF catastrophic. Any suggestions out there?

  Hello

  Did you change your computer before this problem?

  Follow the suggestions and check out them.

  Method 1

  You can follow the procedure in the article.

  Error message when you try to perform a backup system on a Windows Vista-based computer: "catastrophic failure (0x8000FFFF)".

  http://support.Microsoft.com/kb/973558

  Note: You may lose small amounts of data when Windows tries to repair bad sectors on your hard drive.

  Method 2

  Check if the backup-related services are running.

  (a) click on start.

  (b) in the search box, type services.msc

  (c) right click on Volume Shadow Copy and go to the Properties.

  (d) select Automatic from the Startup type drop down.

  (e) click on start.

  (f) repeat the steps for service Windows backup.

  (g)   to restart your computer. Note: make sure that the services of dependencies for Windows and Volume snapshot backup are also started.

  Method 3

  Check to see if the problem exists in a clean boot state. How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a troubleshooting follow step 7: reset the computer to start as usual

  See also:

  Back up and restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

• My files fail to back up automatically. I get an error code: CATASTROPHIC ERROR: 0x8000FFFF. Someone knows what to do to fix this?

  My files fail to back up automatically. I get an error code: FAILURE SIGNS: 0x8000FFFF. Someone knows how to fix this?

  Hello

  
  1. you have Windows Vista Service Pack 1 installed on your computer?
  2. have you done any software or hardware changes on your computer before this problem?
  3. you make a system image backup?
  This problem occurs because the backup process detects that the system drive is dirty.
  Windows Vista backup always includes the system as part of the backup drive. If the system drive is dirty, the backup process skips the system drive, and no snapshot of the system drive is created. Therefore, the backup cannot locate a snapshot of the system drive later, and the error occurs.
  Error message when you try to perform a backup system on a Windows Vista-based computer: "catastrophic failure (0x8000FFFF)".
  http://support.Microsoft.com/kb/973558
  
  Note: CHKDSK.exe would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.
  
  Hope the information is useful.

• Whenever I try to back up the computer I get an error message: Catstrophic failure (0x8000FFFF).

  Original title: irremediable failure?

  Whenever I try to back up the computer I get an error message: Catstrophic failure (0x8000FFFF).  I don't know how to solve this problem.

  Hello

  1 have had any changes made to your computer before this problem?

  Please, try the following methods and check if it helps:

  Method 1:

  Error message when you try to perform a backup system on a Windows Vista-based computer: "catastrophic failure (0x8000FFFF)".
  http://support.Microsoft.com/kb/973558/

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

  Hope this information is useful.