Problems using the af:switcher correctly.

Similar Questions

• I have updated to ios 9.3.1 now I have no sound for text messages alerts and alert sounds no calendar! I just missed a meeting disaster. Any ideas how to solve this problem, all the settings are correct.

  I have updated to ios 9.3.1 now I have no sound for text messages alerts and alert sounds no calendar! I just missed a meeting disaster. Any ideas how to solve this problem, all the settings are correct.

  Try a reset...

  Force restart your iPhone: tap on and hold the Home and Sleep/Wake buttons for at least ten seconds, until you see the Apple logo.

  If this does not help, tap settings > general > reset > reset all settings

• Can I connect a VGA cable simultaneously with a DVI cable to a monitor and use the source switch?

  I found a similar, but not exact question and I was wondering if I could use the VGA cable AND cable DVI simultaneously on a HP 2159 m monitor and switch back and forth from analog and digital using the source switch on the screen? I noticed that some casual games such as found at BigFish and other gaming sites works best on VGA on DVI but I like to watch movies and other DVI instead of VGA?

  I did two HP 2159 m monitor but it could in fact be wise space more convenient to just use the right now and switch from the analog to the digital format.

  Thanks for any response.

  Hello

  You will need to edit the video in the monitor source selection when you want to switch.  Don't put it on AUTO.

  For a test, connect two monitors and then configure your PC for two monitors. Then, remove the monitor as the secondary (VGA) and now connect the cable to the main monitor VGA port.  Now try the video source selection in the menu of the monitor.  I never tried it on my 2159 m but it can work.

  Some monitors do not react to two active flows.

• problems using the snap have amd, playback of Jpeg files

  Original title: I'm having problems using the component feature snap-in.

  Sometimes a single document disappears. When this happens while the document program is managed by then will not work. The document seems to be flying around the office. The last time this happened I had a doc JPEG upward and now I can't see what is JPEG. I don't know why the document wants to fly around, and I don't know how to get my use of the JPEG back.

  Hey Graham,.

  To view all jpeg images in the Viewer Windows photo or any other photo software visualization, you must configure this software as a default value in the default programs.

  Check out the link that allows you to configure the program as default.

  http://Windows.Microsoft.com/en-in/Windows7/change-which-programs-Windows-uses-by-default

  You can try to run the Aero Troubleshooter and see if that makes a difference.

  http://Windows.Microsoft.com/en-in/Windows7/open-the-Aero-Troubleshooter

  If the problem persists, provide us newspapers observer of events, as well as the error message if you receive a message.

  http://Windows.Microsoft.com/en-in/Windows7/open-Event-Viewer

• I'm having a problem using the slideshow module in LR 6.3. The slideshow contains the background image as one of the images to display. Earlier, I had created a slideshow of practice and the background image was not displayed as an image in itself. How to

  I'm having a problem using the slideshow module in LR 6.3. The slideshow contains the background image as one of the images to display. Earlier, I have created a slideshow of practice and the background image was not displayed as an image in itself. How to make it behave?

  Another approach, perhaps a little more elegant (?). Create a collection that includes images for the slideshow. Include the background image in the collection. Drag the background image in the Panel to designate. Then, remove this image from the collection and create the slide show. I just tried and it works, too.

• Activate Bluetooth using the wireless switch?

  Hello. Mine is Inspiron N5030 Laptop (New). When I try to install the driver of the blue tooth, he asks me "Turn on Bluetooth using Wireless Switch". I tried press f2 & fn + f2. But no change. I went to the BIOS and everything was correct and active. How can I get rid of this problem? Please help me!

  Meanwile: Problem solved

  The problem was not the bios, but the new installation of Windows that has used the wrong device.
  Directly linking the R273948.exe Dell driver has not solved the problem

  I did the following steps:

  1. make sure that Bluetooth is enabled in the bios

  2 removed the generic bluetooth device in Device Manager

  3. manually added the bluetooth device in Device Manager (for me it was the 365 dell bluetooth module)

  4A ran update 'setupbluetoothDFu in the unpacked R273948 driver.

  5. install the driver R273948

  Worked for me.  (Dell N5010 wind 7 64 Premium bios A12 version wow)

  Good luck

  Luke M

• M277dw: Reset zero problem using the USB to M277dw

  Hello, I'm just trying to see if anyone else has had this problem. I use the laserprinter HP M277dw and use a current running nine Imac El captain. If I print anything on my printer and then decide to reboot my computer for some reason any, if I keep the USB cable connected to my computer that is connected to the printer, the computer hangs on reboot. It is the same on a full stop to the low and new start up as well. It's almost as if the printer is not disconnected somehow when I shut down or restart. The solution I found is to unplug the printer USB whenever I have to restart or shut down and then reconnect to the computer up and running again. My feeling is that this is related to the El captain, but I can't say for sure. Anyone else see this problem?

  Hi @andrewdawson11,

  Welcome to the Forums of HP Support! I see that you have problems, turn off the Mac, it crashes on restart when the printer is connected by a USB connection. I will definitely do my best to help you. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  Run Apple updates.

  You download and install the latest drivers for the printer? If the latest driver is not installed, which can cause this problem. Here is the link if you have not already: HP Easy Start.

  Make sure that the correct driver is added.

  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (Laserjet M277dw)

  If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  

  

  If the problem persists, try the following:

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the printer name) Then click the Add button.

  Test the printer and try to restart the Mac again.

  If there is anything else I can help you, let me know. Thank you.

• Problem using the serial port with windows 7

  Hello

  I have a modem of SIM cards (used to update remote controller of the electronic gate) that connects to my computer via the serieal port (COM1).

  The modem comes with its own piece of software that worked fine on my old computer with windows 7 (I had a similar problem, but then I just need to update the driver).

  I now have a new computer and I am unable to connect using the modem (I think I'm using the latest drivers for the serial port).

  Is it possible that I need an older version? If so, how can I get a?

  My motherboard is a GIGABYTE H81M-D2V.

  Any ideas?

  Thank you

  AVI

  Hi Avi,

  Thank you for the update on the issue.

  The UART, or Universal Asynchronous Receiver / Transmitter, is a characteristic of your microcontroller useful to connect serial data (text, numbers, etc.) to your PC. The unit switches incoming parallel information (in the microcontroller/PC) to series data that can be sent over a communication line.

  According to the description you provided it seems that your modem isn't connecting with your Windows 7 computer, then I would contact Duetech Berès your modem manufacturer, so that they provide you with the steps to set it up.

  Get back to us after contacting them and please get back to us with your question was last updated.

  Kind regards.

• Problems using the file on the server

  Lately, we have difficulties to use the suite of creative cloud files. When the file is opened for some time, the software crashes. However, if the file is copied to disk local is not a problem.

  Contact support via chat, he guided me to use the file locally, because Adobe does not guarantee the functionality of the files on the server, only disk locally on the workstation.

  Anyone knows help me or have experienced this situation?

  It's just that: work locally.

  For some people indeed does the work on the server, but it's a very personal thing as there are a lot of different hardware and software solutions interfering (all the different servers and switches, and cables and their operating system). For some people, it can even run on a computer but not on the other in the same room.

• Anyone else had problems with the connection switched to the internet automatically? More details

  I had this problem since the first part of January 2011. I use a dial-up connection, I have windows vista home Premium 32 bit. I can click on the internet icon on my desktop what the little box that has a checkbox to automatically connect to the internet, the diallog which is supposed to have the name of the internet connection is empty, it tries even to compose, but he does not open the port to dial an outside line. All the time I have a tick on my tab internet connections dial options each time that a network connection is not present or always dial my connection default slot choose settings if you need to configure a proxy server for a connection, it will not work on one, I can manually connect using of these (one at a time) but every time I click on the internet icon does not recognize a connection already exists, I get this message telling me that I need to connect to the cause of the internet, I work in offline mode. Whenever I get that message I click on connect to go online then it trying to connect automatically by calling and then I get this message, it cannot establish a dial-up access and still it does not open the port to dial an outside line.

  I can connect manually using the same connection and put the check box on the never dial a connection under select parameters if you need to configure a proxy server for a connection on the connections to internet options tab and I don't have a problem connecting to the internet. I did a reset and set up a new connection and that didn't work either.

  The Connection Wizard recalled the correct information, it was not correct that then I would not use this same computer online now. The reason is that I am currently using the same computer that has the problem of not being able to connect to internet automatically online. This same computer that has the problem of not being able to connect to the internet automatically, it will connect manually using exactly the same ISP configuration by routing the connection in order to never establish a connection on the internet connections tab options, while I'm on dial upward, it is assumed to be always dial my default connection under choose settings If you need to configure a proxy server.

  I have windows Vista Home premium 32-bit with service pack 2

• Continuing the audio problems using the Kona card

  MAC PRO 2 x 2.93 GHz 6 Core

  12 GB 1333 DDR3 Ram MJZ

  Kona card 3

  Kona driver 10.3.1

  Adobe for Kona 10.3.0 utilities

  Graphics Quadro 4000 card

  Video player Apple XServe raid

  more 2 TB G-raid & 3, 7200 RPM internal 2 TB disks

  10.7.4 OS

  CS6.0.1.31

  So I've dealt with this problem since I downloaded and started using the Kona 3 with PPCS6.0.1 drivers

  Often when I start my computer after it turned off the day before and restart the Prime Minister in the same project that I left that worked very well.  I'm broken audio playback mode.  When I check my audio computer system to preferences they mysteriously turned on in Kona, which is what causes the problem.

  I try to change their return to the line output line, preferneces and close then reopen and that the switch did not and they are back to Kona.

  I repair permissions and restart and make the change again... sometimes when I do this I get a kernel panic, so need to stop and start again.  Someties it will fix the problem today, sometimes not.  Today, after the kernel panic, everything seems to work properly.

  It's a bit boring and a 15 to 20 minutes exercise every morning.  Of course, I could leave my machine all night, but I'd sure appreciate all the ideas on how to fix this ongoing issue.

  I've turned into a bug report today, because I think that it is indeed a bug somewhere.

  THX... Jim Watt

  I found a post in the apple forum that solved this problem...

  If you have problems with your sound 'exit by default' in Snow Leopard, try the following...

  Go to your hard drive (root level) and open the library folder. Open the Preferences folder, and then open the Audio folder.

  Remove the two preference files in the Audio file:

  -com.apple.audio.DeviceSettings.plist

  -com.apple.audio.SystemSettings.plist

  Restart your mac, and I hope that your problems will be solved.

  This solution worked for me, and I hope that it will be too much for you.

• Insert the statement do not using the MultiSelect values correctly

  I have a set of boxes MultiSelect displayed with in a cfloop. I named the MultiSelect boxes "MultiSelect #ID # with #ID #
  
  the value of KP for each record retrieved. I do this to make sure that each MultiSelect box has a unique name so that when I
  
  Insert data by using a query of < cfloop > names of are not in conflict. Here's the HTML for the selectbox.
  
  < select name = "" MultiSelect #ID # ' several size = "3" > (query #ID 'getNonRoleItemDetails) "
  < cfloop query = "getMultiitems" >
  < option value = "#AddInfoID #" > #Name # < / option > (these two values are taken from the "getMultiItems" query
  < / cfloop >
  
  Here's the query insert I use on the action page that uses this data.
  
  
  
  < cfloopquery getNonRoleItemDetails >
  
  < cfquery = name "Datasource =' #application.dbname # of the Insert_Multi_Records" >
  
  INSERT INTO tblItemDetailUpdates (ItemID, ItemDetailsListID, ItemDetailValue, ActionItemID)
  
  VALUES (#getNonRoleItemDetails.ItemID #, #getNonRoleItemDetails.ID #, ' #form ["MultiSelect" & ID] #', #ArrayOfIds [Counter] #)
  
  < / cfquery >
  < / cfloop >
  
  
  
  The problem I have here is that the query works correctly, but it is the insertion of the ID MultiSelect values selected (104, 105,
  
  (106), rather than the real names of these values (IOC, AP, AR... etc).
  
  
  I looked at the source code and each MultiSelect box is named correctly and uniquely. Insert inserts the correct ID
  
  values, but not the names.

  Sigh too bad I am a fool. Well at least I thought about it.

• Problem using the View object for validation

  Hello
  I defined a form of simple to practice swing. It has an entity object and two objects in view. One of these objects in view is an editable VO based on area of occurrence, and the other has a simple 'select count (*)' table. I defined a validation of the method on one of the EO attributes to see how to use the VO for validation. However, I set the Module of the Application to use both from my point of view. As much as I undrestood, when I define a VO for AM, AM will instantiate it the first time it starts to run. Here is the code inside the method for the FirstName attribute validation:
  
  / * Validation for first name method
  */
  public boolean validateFirstName (String data) {}
  ViewObject vo is getDBTransaction () .getRootApplicationModule () .findViewObject ("CountEmployeeInstance");.
  If (vo == null) {}
  System.out.println ("vo is null");
  }
  else {}
  vo.executeQuery ();
  If (vo.hasNext ()) {}
  System.out.println ("count =" + ((CountEmployeeRowImpl) vo.next ()) .getCount ());
  }
  else {}
  System.out.println ("vo has no other");
  }
  }
  Returns true;
  }
  
  The problem is that vo.executeQuery () does not return a any folder. In fact the vo.hasNext () returns false and I get the message "vo has had no news" on the console. Please be careful that the sql statement in the VO is always SELECT COUNT (*) and it returns a record. I found that if I use vo.closeRowSet () vo.executeQuery () before everything is working properly.
  Please tell me what is my problem and why it works that way?
  Best regards
  Alireza Vali

  Sorry Alizera, on transit to the officer of the WATCH.

  This can be the 'compulsory' classic of the substitution of issue position iterator. Take a look at the post following Sascha Herrman who addresses the issue and as solution suggests the creation of a new RowSetIterator to avoid the problem:
  Re: viewObject.executeQuery does not work the second time

  There are a number of positions where Sascha has solved this problem so a search can be useful to the effort on your part.

  Next post gives an interpretation of long-term by myself if accidentally you use getRowSetIterator that you might find useful, but essentially Sascha answer is correct, "to create a new RSI", I was talking a slightly different point:
  Re: [SOLVED] Re: how to browse all lines

  Let us know how you go.

  See you soon,.

  CM.

• Problems using the iPad Pro notes app

  I have a new iPad Pro (IOS 9.2), but the notes app doesn't seem to work properly with a pencil. There is no line doodle icon and I can't write with a pencil. Can I use the pencil to 'click' on the functions as "BOLD" and new, but not as a pencil. Someone at - it experience with this and how can I solve this problem?

  Have you updated the Notes app in the app itself.

• 7000 R as point of access one using the integrated switch

  I use the first 7000 R as a router and the second 7000 R as an Access Point. I can even if need the integrated switch of one Access Point is this switch automatically connect with the same netzwork?

  Marcel

  You can use all of the ports on the R7000 in AP mode. They are in the same network. If your access point is configured properly on the ports of the AP devices, should receive a valid IP address / gateway to the Base R7000 (DHCP server). You could even hang it cut one of thos ports, if you wanted to... Make sure that you are running at least cable CAT5e Ethernet between the R7000 AP and the Station of Base R7000 to connect the two devices.