Problems with Instagram feed with Fancybox

Similar Questions

• Problem with Knowledge Base detailed RSS feed

  Hello

  I've subscribed to the Feed detailed Knowledge Base via http://feeds.feedburner.com/vmwarekbfeed.

  Because the power source has moved around Jan, 14 I get the same items over and over again, every day.

  Statistics of Google Reader for the last 30 days, there are 309 new article / per week which is a lot more than before.

  Is it a problem with the power supply itself or with the tag "updated date" items change all the time?

  Any help is appreciated!

  See you soon,.

  Vincent.

  Sorry for all the problems with the RSS feed. We look for ways to solve this problem, as the diff鲥ntes involved pieces do not play well together.

  Here are some alternatives for you that you may want to consider:

  1. KB Digest is published every Monday with a list of all the new articles from the previous week.  The correct URL for RSS feed of this blog is here. The RSS feed of this blog works, we are committed
  2. If you're on Twitter, follow @VMwareCares. This account tweets per day for each new KB article.

• Portege R500-12J: problem with feeder

  Hello

  First of all, sorry if my English is bad, I'm French (Yes, that's an excuse ^^).
  I have a problem with my Portege 500 - 12J.
  I can not recharge 6 months... I used to do something with the CAP to make it work.
  But now, this trick no longer works.

  Being a geek, I tried many things to fix it, but it seems that I have to change the plug AC (female, the computer).

  Do you know if there is a way to change this?

  Kind regards
  Tom

  An FSL may fix it for you.

  Here is a list of ASP:

  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

• Problem with driver with Agilent 6031 A feeding

  Hello and goodmorning,

  I tried to develop my first application of cvi in which I need to use a power supply (model Agilent 6031 A). I first use direct command of GPIB and I managed to make it work, but with some difficulty, due to the fact that sometimes orders are missed.

  So I downloaded the driver from the website of OR, and I tried to implement in my code. I found a problem with the first statement, the init it. Here is my code:

  ViPSession InstrumentH;
  
  ...
  
  ...
  ...
  
  All = hp6xxxa_init ("GPIB0::5:INSTR", VI_ON, VI_ON, 1, & InstrumentH);

  After running the above code, I found in 'All' value '-1073807339 "and InstrumentH is equal to NULL."

  Any idea and advice would be much appreciated.

  P. S.

  There is a way, as in Labview, to find the explanation of the error Code?

  Found the problem. Food must be set of SCPI commands on the old controls ARP using "SYST:LANG".

• Satellite A660 - message: WARNING: a problem with the cooling system

  My laptop recenly started giving the error "Warning: a problem with the cooling system has been detected." Please turn off computer immediately and return it for service"- Yes the fan had stopped working and touchpad area was hot.

  So I take it on the type of service (toshiba) and must answer for fan, Mo, HARD drive, he said. Is this possible? -J' I have extended warranty, but is ' t it much? not to mention that it takes a month to get things down.

  He also mentioned that I could use the machine with a cooling pad until then if I wish.

  Any feed back?

  > Yes the fan had stopped working and touchpad area was hot.

  In this case, there is really a hardware problem.
  But I m wondering why he should replace the HARD drive and the motherboard
  Perhaps only the cooling module began at malfunction of course this is just a speculation
  If the technician has checked the material, then they need to know what parts are not OK.
  So don t think you have no choice.

  But the guarantee is valid for all is free

• ENVY5530 e-all-in-one: still some problems with my printer ENVY5530

  My ENVY5530 at the age of one month all the in a has problems.  Firstly, it has not feed paper, then a HP Tec, I help and then it worked fine for a few weeks.   Later, same problem returned, paper does not feed, and now, I still have a new problem.  The document is printed, but the top is folded and torn.   However, from time to time, once a page prints perfectly and I am hopeful, but then the mistakes to come immediately.  I reinstalled, but the book looks always up before it feeds through. It is as if it is to be caught by something while it passes through.  Now of course the store (Best Buy) not exchange it because I went over the allocated period of 15 days.  Of course, I thought it was working fine up until 15 days have expired.  The most irritating thing is well, I can't count on it, what problem there at that time?  Maybe tomorrow it will work perfectly again.  Y at - it something I am doing wrong?  Has anyone else encountered this problem with the top of the paper coming out mutilated?  If I can't understand this point I'll have to return under warranty, HP will repair or send me a replacement.  But I would rather by this argument.  Thank you

  Hi Laylac,

  Thank you for your answer!

  I am pleased that the solution is an easy solution for you!

  Please consider tagging 2 Message like "Accept as Solution" so that someone else in the community who may encounter this problem can more easily find the solution.

  Best regards!

  "Please click the Thumbs up icon below to thank me for having responded."

• Problem with external monitor when used with the Satellite P100-434

  I'm trying to use a Vizitron L - 151 monitor flat screen connected to the VGA port on the back of my Satellite P100 - 434 (PSPADE)

  I find that the screens seem to periodically - feeding cycle windows resize themselves and then the screens settle down again. This happens with the laptop and the external monitor.

  I've updated the latest available BIOS V4.20 (November 2, 2007) I use 7.15.11.6369 NVIDIA GeForce Go 7600 driver version. I'm under the edition of Vista Home Premium to standard build.

  I even resorted to the use of the dvd system recovery to rebuild completely the laptop and the problem persists. In Device Manager I have generic Non - PnP monitor and below that I have a generic PnP monitor I tried and it is not possible to get specific drivers for the monitor Vizitron L-151. * NOTE * I saw dxdiag that the external display is identified the Non - PnP device

  The display configuration that I'm trying to use is to have my laptop as the main screen with the external display on my left as an extension to the desktop. In display config my computer screen appears as number 2 with the additional display in the poster as a device 1

  While typing this my screens have made this three times and the last time, this IE7 window installs itself to the external display in restored down to size.

  If anyone has a glimpse of it, I would be very grateful. There are no problems when the external display is deleted.

  _I can reproduce this problem on demand_ by uninstalling the monitor Non - PnP Device Manager.

  Sorry, mate, but you ad confuses me a little and be hones I m not 100% sure what you take on
  You have some problems with the resolution of the external display or what?

  I've found another thread on the setting of the external screen as main screen:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=96263#96263

  According to this statement:
  > In display config my computer screen appears as number 2 with the additional display in the poster as a device 1
  It seems that the external monitor has been on the main screen and display books internal as external.

  I recommend you change this settings and to use books appear as 1 and the external display form 2.

• Envelope printing problems with M401dn

  When you print the envelopes with a M401dn Pro LaserJet, the return address is not properly merged, and there seems to be some random jobs printed in the buffer zone; the main address is printed correctly and properly merged.  I noticed the problem with greeting card envelope, and I've never had problems with before on three printers LaserJet previous (LaserJet II, LaserJet 5 p and LaserJet 2100).  With a few #10 envelopes, the return address is properly merged, but I always get the tasks in the buffer zone.

  I get the same problem if I fold a piece of paper in half and then pass it in the envelope feeder.  If the envelope feeder is empty and the paper feeds from the main Board, the return address is properly merged but I always get the tasks in the buffer zone.

  There no problems when you print just the documents.

  I seem to get the same results using the PCL 6 or the PCL 6 UPD driver.

  Any ideas?

  Hmmm... I could have sworn that I updated the paper type "Envelope", but obviously, I did not; with that restored, the problem seems to be fixed. Apparently, the fuser is powerful picky about the thickness of the paper.

  Anyway, if someone experiencing similar problems, the paper setting could well be the cause.

• Problem with the generation of multi-sinus wavefrom of random phase using PXI-5412

  Hello

  I am trying to generate random phase multi-sine waveform using the PXI-5412 14 bits 100 M/s AWG on LabVIEW8.0.

  The version of LabVIEW8.0 for the PXI-5412 comes with a sample VI on multi-tone waveform generation. When I tried with a different combination of frequency and amplitude, there is no problem with the sample VI.

  Because I need the phase to be random for each frequency component, I had tore the tone cluster containing 3 elements, i.e. frequency, amplitude and phase, which feeds the generator of signals, and rebundle the cluster with elements of reading a CSV file by using a loop, a fixed value amplititude and a number of random phase of the frequency generated by a random number (formula lournies elements (: pi - 2pi x r). When the waveform multi-sinusoidale generated on the PXI-5112 100 MHz Digital Oscilloscope, it was pointed out that the waveform would change with the tested frequency range.  However, the amplitude of the wave is always ~1.4V (guess that's always default to 1 V x sqrt (2)).  There is no question also when testing the same combination of frequency and amplitude by using sample VI without modification.

  Please find attached the VI of the sample, snatching up to the version and the CSV file I used. Is there something wrong with the table 1 d of the cluster of 3 elements that I built and assembled causing the signal generator to ignore the value of input amplitude and, possibly, the input value of the same phase (as it seems that the amplititude is always set to the default)?

  The other question that I found on the two sample VI and ripped version is on the news of sampling.  The waveforms appear on digital Oscilloscope PXI-5112 always default to 10 cycles no matter how changed the sampling frequency and the number of samples.  For example, if the frequency is 10 Hz, sampling frequency is 1000 Hz, and I put the number of samples to 10000.  I'm supposed to get 10000/100 = 100 cycles.  However, I could see 10 cycles no matter how, I changed.  What should be the correct way to change the number of cycles?

  Really appreiciate your help and advice. Thank you.

  1 phase unit is in degrees (-180 to 180), no - pi pi.
  2 standardize Waveform.vi always normalize your amplitude of the signal. You can remove it to use your desired amplitue, but must make sure that it is not above 5412 spec.

• Problem with output 5VDC NI 9411 channel

  Hello

  I'm having a problem with output 5VDC NI 9411 channel. According to the specification of the module, it was stated that the module required external power from 5 to 30 VDC. Game of supply the module with the requirement of tension, I am still unable to get the output voltage of the output channels. Does this mean that the output voltage may be available depending on the program?

  Thanks in advance,

  Kind regards

  Mike640

  Hi Mike,.

  Thanks for posting on the forum of National Instruments.

  You should still be able to get an output voltage in properly feeding the NI 9411 and your external device.

  If you don't have a power supply of 5V to power the external device directly, or if you want to simplify the cabling, you can connect an external power supply to the Vsup and COM terminals on the connector terminal block screw NI 9411 and connect the external device to one of the pins Vout + 5. If the external device is already powered, you have not need connect a power supply on the NI 9411 or plug the Vout of + 5 to the external device.

  I hope this helps.

• Strange problem with RE4000W

  Had a job that put re4000w in place as follows:

  1. dsl with router, feeding an E3200 configured as an AP bridge mode. When I upgraded my dsl, I changed the E3200 to be my router for the simple fact of being an AP to serve the floor of my house.

  2 RE4000W down and, using a different SSID... upstairs is "HomeNetwork", is down "HomeNetwork_downstairs".

  There are a few reasons I wanted separate SSID, but above all, this approach worked and worked well. Were very pleased with the RE4000W.

  Last week, had a huge storm, power outage for 2 hours and the Extender not on battery backup. Everything else was on the backup, so no problems when the power came back, other than the Extender. When the power came back, the extender did not work, so I thought I'll reconfigure everything, thought he had lost its settings. And no, unfortunately, I save a backup configuration file.

  I again and again to make it work the way I had it before. Can't seem to save the settings and works correctly with a SSID dffierent. I've tried everything, including:

  1 using the dhcp, so a static IP address

  2 configuration with ethernet cable and via a wireless connection

  3 reload firmware

  4. try different settings, etc., thinking that I'd forgotten something about how I had it configured... nada

  5 resets, including the dsl router, e3200, etc... no luck.

  When I configure with separate SSID and connect to the Extender, I get the "oops" screen, says the wireless network is down... when I get back the 'site survey' page and 'connect', it then changes the SSID back to match the SSID of the AP.

  If it was my first time configuration, I would be open to accept that, for some reason, I can't have 2 SSID separate, even though the manual says its possible, but I had to work this way... stable like a rock for more than a year. The other concern is, I can't say for sure it appears the extender works using the same SSID... but did not signal any measure to confirm its operation. And with the same SSID, not sure the application I use the difference between the two by mac id.

  While I didn't think it was a problem with the Extender, as in, power bounce and perhaps fortification he caused no harm, I'm starting to look like that. That said... nothing else in the affected House, then I struggled with it a little.

  I have not ordered a new, but it's my next step, unless there is something of a point of view of configuration that I'm missing/forgetting.

  Thoughts/ideas/comments?

  Thanks in advance.

  Following this... I've finally just went ahead and ordered a new RE4100W. Worked fine the first time, able to implement different SSID with no problems. The web interface with the 4100W is certainly easier to work with.

  Still don't know what happened with the original RE4000W, but given a reloading of firmware, resets, etc did not work, would seem she hired some kind of equipment with power failure problems. I have trouble with it, but no other explanation I can think makes sense.

• Problems with Vista OS SP2 after automatic updates: using OneCare; application of integrated keylogger HP CPU "HP SDP" made by IBM in Durham, North Carolina (?); corrupted Samsung print driver downloaded from the website of the company

  Entered possible hacker:

  1. techie OneCare WINS access - probably not unauthorized and do not believe it causes always provided a quality service, but they have had access in the past.

  2 HP technicians - have had access to my computer once - did a good job with computer crash (not sure cause), but tried to sell me more HP products when I have no money...

  3. after the technicians HP did good job with crash, started to have pop-ups keep HP application that appeared as an add-on that works without permissions on my computer. Google the name of the HP SDP application > recovered information said program is IBM in North Carolina. Called them. Nobody gives any information on the program until I got ahold of a person who gave me the phone to techie Dept. It took all day. Not have not yet contacted technology because they have closed before I could call.

  4. called HP to inquire about the search info from HP SDP. on his goal? HP said he works as a keylogger you sell stuff. But what was weird is after the system crashed and repaired, there was one day that he has opened three times in ten minutes! The behavior of the application has changed after my OS has been repaired. Then after that I indicated HP where I found information on this program, the program disappear from the list of "run without permissions" in internet options explore > manage add-ons > run without the permissions list

  5. one day, I'm working on a word document, and the printer stops abruptly, impression. No amount of turn, or by clicking 'Cancel' will get doc from the printer queue. MS literature said this could be a security issue. The printer says "printing of documents", but no printing at my end.

  This problem is compounded when I delete browsing history and try to refresh the internet Explorer. That activity seems to take pieces of the program Samsung printer with it, even if I had excellent results in the past with Samsung printers and their downloads, and I never had the damaged printer driver to exercise this activity in the past.

  If I didn't have a short term in the Court of appeal in a week, I would say it's a question of OS, or program problem, but it's as if something falls down as soon as another issue is fixed and the unusual behavior of the computer, more timing and the purpose of the brief to me 90% sure that this is a pirate or a virus the surplus of the Samsung driver deleted pieces being left on my machine after uninstall.

  Dear Karena R,.

  Thanks a lot for your excellent advice. The Techies MS OneCare fixed the popup of HP before I read your message. (I was remiss to check my email...). I'll follow the instructions you sent me and am running the OneCare security right now, online scanner that I already know an excellent and effective tool because it has repaired my MS operating system and programs after that I accidentally deleted parts of the operating system by removing a .dll file, I need or such a thing! I also wanted to thank you for the information about the object of the HP SDP pop-up window. I saved your instructions on how to remove this case, the pop up appears again. One thing I noticed is that, after removal, some keys on my keyboard don't work, and I've read that other HP users encounter the same problem with the keys on the keyboard. The keys that seem to be affected are the keys that automatically open and close the door of the CD burner. Not a problem, because it is another way to open and close the drawer. It's one that HP must improve. In regards to your advice on the printer driver you have been 'right on' new! I reinstalled the driver using my own CD (not the latest driver, but one that works!) I think that the problem with the update of the Samsung driver that I downloaded from the Web site doesn't have some kind of problem. It is very unusual for a driver to Samsung, because I got excellent results with printers Samsung and free updates downloaded from their Web site. The first Samsung printer I had worked so well, for so long as the small rubber roller that takes the paper and it feeds through the printer wore out until the printer is, literally in a 100,000 pages printed after that I bought for about $80.00 dollars! So, I went out and bought another one, and that's what I use now. The printer works fine now, except for some reason, the icon in my taskbar notification area, allow to check the printer the status of jobs, cancel or repeat printing as before. Once. from time to time, a job stuck in the queue for the printer and will not erase unless I unplug the printer from the central unit. Nor will it print. But since I reinstalled the driver, this has happened only once. With the downloaded update, it happened all the time. It is possible that my OS is misconfigured, but I started to run the routine tune ups and analyses using OneCare and unless I used to defragment. I learned that the defragmentation of the hard disk too can cause problems also. The last thing is, I think that sometimes, tiny files needed to run my OS and files other programs can be sent to my temporary folder by accident. MS still once, All_Knowing computer, somehow recognizes the files I need and pushes me to ignore them, but perhaps it does not work for non-Microsoft like Adobe programs. I will use the link in your message to run the fix with the printer driver just to see if it works. If it is not the case, I can always reinstall the driver with my CD that came with the printer. Thanks for the excellent and informative tips and forgive me if I do not respond sooner!

  Sincerely,

  E-mail address is removed from the privacy *.

• Printing problems with a Canon PIXMA iP6000D

  I have a Canon PIXMA iP6000D printer and problems to print.  It feeds the paper and acts like it is printing but nothing prints.

  I tried all the trouble shooting in the owner's manual options.  I even tried to unplug and reconnect after a few minutes.  Nothing helps.  Someone at - it ideas?

  Thank you

  Hello

  This looks like a problem with the printer inself.

  Support for Canon
  http://USA.Canon.com/Cusa/support

  Canon PIXMA iP6000D
  http://USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_ip_series/pixma_ip6000d

  I hope this helps.

• Problem with bingaerialeurope theme, I wonder not «subscribe to RSS»

  I recently had a problem with the theme of Europe bingaerial.

  It has been installed, but the flow has stopped updating

  I tried to remove and reinstall but I am not asked "subscribe to RSS", and no images are uploaded.

  I can download versions of bingaerial

  Hello

  I suggest to follow the steps provided and check if it helps.

  a. run Internet Explorer and then press ALT + C or Open Favorites Center & switch to the Feeds tab and remove the following feed

  http://themeserver.microsoft.com/default.aspx?p=Bing&c=Desktop&m=en-US
  

  

  b. open personalization (right click on desktop and choose personalize) and shuffle or re - select the Bing Dynamic theme.

  c. He invite you to subscribe flow RSS of Bing and to download attachments to automatically rotate wallpapers or download unique wallpaper for your desktop. Click download attachments

  

  • Now theme will begin downloading wallpapers automatically.

  Hope this information is helpful

• Problems with export low res/compressed images Lightroom

  Hi, I recently noticed problems with the export of images. Even if I did change the pixel dimensions that I used to use (640 x 600 for a blog), the exported image is significantly more low resolution than usual. The only things that have changed is that I upgraded from LIghtroom stand-alone 5-6 Lightroom on creative cloud - and also I got a new Macbook Pro.

  You seem to be using a mac book pro with a retina display. This is that websites must be programmed to feed your browser an image of higher resolution that they would feed to people using a lower resolution screen. Not all Web sites do it properly (not more). I don't know if your site is done automatically. An image of 640 x 600 or 900 x 800 won't cut in general, certainly not to the size you are displayed on this Web page. These sites are usually not this worked well. I've written about how to do it on my blog here: Jao photo blog: a much simpler way to serve the retina displays the correct image but you need a way to use both versions of the image somewhere.

  On your retina display when opening an image of 640 x 600 pixels in preview will also look bad as it will show too default double pixel. A good thing to do is to go to preferences in preview.app, click on the images and select "1-pixel image is equal to 1 pixel of screen. Then when you open small images, it should show the actual resolution of the screen. If your image is larger than the screen, you can press command-0 and it will display the image in the native screen resolution. Assume that you are using "best for display" in the context menu of the resolution in the display of system preferences section. You should have probably defined it this way in any case because otherwise the 1:1 in Lightroom do not display correctly. Your screenshot is displayed to indicate that you have defined properly.

  In addition, there is absolutely no reason to use quality 100. Most of the 75-85 images will be indistinguishable from 100, but will be much smaller in size. Second, ignore the DPI setting. It is not relevant to the images online. The only thing that matters is the size in pixels.