Problems with monitor CF11

Similar Questions

• Problem with monitor

  Hello!
  Is it possible that windows vista dosn´t load Samsung SyncMaster 910 m monitor? I just put on my windows vista PC, but he does´t recognize my monitor? There is also no disks for vista on the samsung.com website?

  Strange, is that there is no problem with the same monitor when I used XP.

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  They will help you with your question in the Forum Vista Hardware at the above address.

  See you soon.

  Mick Murphy - Microsoft partner

• problem with monitor and system

  the power light is on, but the system is unresponsive and freezes until it can I do to solve this problem

  Hello

  BTW, if the monitor is separate from the computer (not a laptop) then check the cables
  at both ends - drop, and then hang them up in case there is a connection problem.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I have problem with monitor emachine

  The good towerworks emachine, but the emachine monitor keep saying NOT of SIGNAL and blue color turns orange. I had the same p roblem a year ago and emachine helped me. I remember just what was the answer. Please help.silvy

  The good towerworks emachine, but the emachine monitor keep saying NOT of SIGNAL and blue color turns orange. I had the same p roblem a year ago and emachine helped me. I remember just what was the answer. Please help.silvy

  Could be a faulty graphic card or video cable, or you may have turned off the output to the screen (as if you were to use a projector

  One thing for sure, however, nothing to do with Word.

• Serious problem with monitor 4K

  I use Bridge CC (Ver6.2) with a 4K screen and there is a problem, the font looks like a lot of ants, is too small, and I couldn't find the 'Interface' in the 'Preferences, so I couldn't adjust any setting on HiDPI, kills me, could someone else tell me what I need to do? I spent a lot of time searching for solutions, but I can't solve it yet! I use the bridge in my work, and I have totally no idea where is the solution!

  Hey Benz Lee,

  Could you please try updating your bridge to the latest version which is 6.3.1.186 x 64?

  Kind regards

  Sahil

• I have a strange problem with my RAM supported by installers. When I check the activity monitor, 3 installers are open and they start around 80 MB memory RAM used for about 7 or 10:08 minutes or so.

  I have a strange problem with my RAM supported by installers. When I check the activity monitor, 3 installers are open and they start around 80 MB memory RAM used for about 7 or 8 concerts after 10 minutes. I have to force them to quit, but I don't know what I am closing or why they open in the first place. Applications downloaded on iTunes?

  

  In addition, the Console has opened with the same message several times, but I don't know what that means.

  Any help would be appreciated.

  Hello

  The last is a picture of the Terminal window.

  Just because it lists 'Console' does not mean that it has nothing to do with this application.

  You have not said why or what you're trying to install so I can't help with that.

  You can use the activity monitor to leave their.

  After you select an item, use the X in a type of stop sign icon and confirm force quit.

  

  21:36 Thursday; September 15, 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• Connection problem with the second monitor, macbook pro 2014, OSX El Capitan

  There are a few threads describing problems with two monitors, but I have not found a match.

  I like for the operating system ask login password once the lid is closed, no matter how much time has passed (even for a moment). Also, I work with a dual monitor. However, when my macbook is plugged into the monitor and I close the lid, the macbook don't disconnect but spends just primary monitors. Understand that this could be a feature and not a bug, I tried to unplug the monitor before closing the lid. But the OS seems not to realize that the monitor has been disconnected, and when I close the lid he didn't ask me for my password once that I reopen it. Does it also if I wait a bit (i.e. one minute) after disconnecting the monitor, but not if I wait a while (or 15 minutes), well that I've not enough highlighted how long is necessary so that it starts locking on my closing the lid. He does it with different monitors, so I doubt that it depends on the particular monitor. In both cases, I used the HDMI port.

  This is quite annoying, because I need to be able to disconnect safely in a short period of time, and I was not able to find a workaround on mine. Everyone knows this? Thank you for any help or advice.

  Emilio

  You might have invoked indevrtantly this obscure 'functionality' of MacOS. Read the article and see if you do these things:

  Use your Mac laptop to view closed with an external display - Apple Support

  .

• Using an IP191 monitor, have random horizontal stripes on the screen - have no problems with other browsers. also no problem with FF on the other PCs on the family

  Using an IP191 monitor, have random horizontal stripes on the screen - have no problems with other browsers. also no problem with FF on the other PCs on the family.

  These "streaks" seem to be the domain of the high frequency analysis; they can be eliminated by scrolling upwards or downwards.

  Hello, maybe it's a problem with hardware acceleration - try updating your graphic driver, or in case this does not solve the problem, or there is no new version available at the time, disable hardware acceleration in the firefox menu

  

  > options > advanced > General.

• Firefox has only display problems in the upper left region of only my Dell U3011 monitor; the monitor does not have these problems with any other application

  Some parts of the Firefox window are translucent, allowing the image of the desktop to show through. These regions are anything but great internet site central image which behaves normally. Unless the desktop is completely black this problem makes reading the tabs, address bar and the bookmark are difficult if not impossible. I encounter this problem only on my new Dell U3011 monitor. Firefox is the only application that has this issue on the Dell monitor. The monitor built into the laptop that animates the Dell monitor does not exhibit this problem. The laptop is a Lenovo W540 running Windows 7 64-bit. Thank you very much for your help. Steve Schupbach

  Hello stevesch

  first see : problem with Firefox going transparent troubleshoot and find a solution

  then with patience to see:

  questions/940393

  questions/940389

  questions/940374

  questions/940377

  questions/940384

  questions/940395

  Thank you

• Problems with external monitor and the Satellite U200 - 10 d

  I have a Satellite U200 - 10 d running Vista Business Edition. When I attach an external display screen flickers (horizontal lines on the screen)... It's worse when you move the mouse on the screen. The monitor on the laptop is fine I just have problems with the external display.

  The screen that I is a model VG1930WM viewsonic (widescreen) here is the specs of res for this screen...

  PC VGA up to 1440 x 900 non-interlaced
  Analog analog/digital RGB (75 Ohm, 0.7 Vc - c) / DVI - D

  Anyone have any ideas? I checked the graphics driver for vista and this is the latest version...

  HM, it's a nice solution, I have a friend with a similar problem.

  We will try your suggestion, snipe and perhaps give feedback if it worked for us.

  Welcome them

• Qosmio G10: problem with Port Monitor

  Hi all

  I have a Qosmio (G10), but I have a problem with the functions of 'Port Monitor-in '. However, I have connected my computer cassette player output ports "port monitor" with the proper cables and jack and get good sound but get no video.

  where I go wrong?

  Thanks in advance.

  Hello
  you need to go to "start / all programs/toshiba/utilities/photo Enhancement utility ' and then click 'monitor input parameters'"
  choose s-video and monitor-in.

  Good bye

• External monitor display problems with Dynadock U10 on PC Toshiba laptop Win7

  I just started with my current compnay and they allocated me a new from Toshiba Satallite laptop running with Windows 7 64 - bit operating System.

  They hooked me up a Station of reception Dynadock U10, separate keyboard and a mouse and a monitor external 22 ".
  I experienced a problem of compatibility with some software, but I currently have a major problem with slow internet pages freezing or general display issue when the VGA is connected to the docking station.

  The laptop works fine when the VGA is connected directly to the laptop. I have download the recent software/driver upgrade loaded 18 (TC30322400A) without fixing the problem.

  I also loaded the upgrade diplaylink 5.6.31548.exe, as mentioned in other forums, once again, without success.

  Any help would be appreciated.

  Alex

  Are you using the latest driver?
  In my opinion you should not update BIOS.

• Satellite A500 - problem with the monitor after restoration

  Hello
  I have a Satellite A500. He has a problem with the monitor for a while, when you turn it on it's all lines etc. and you can not read but once the laptop to boot completely it is fine. My problem is that I wanted to do a restore, but I couldn't because the screen problem it started so I plugged into an external monitor and perform the restore. That has worked well.

  But now the laptop recognizes any my laptop screen. When you go to view it offers no other monitor choice other than external, I used for the restoration. I downloaded the display driver but nothing has changed.
  ANY IDEAS?

  Thank you

  (I have the disks for the restoration, if that helps.)

  > There a problem with the monitor for a while, when you turn it on it's all lines etc. and you can't read
  If I understand you right you can see when laptop starts and you see Toshiba welcome screen. Is this good?
  When you enter the BIOS settings you see thise lines too?

  Later, when you see the desktop on the external monitor, you can use the FN + F5 key combination to switch between an LCD and external monitor. Please try to use it and post comments if it works or not.

  What operating system do you use?

• Problem with external monitor when used with the Satellite P100-434

  I'm trying to use a Vizitron L - 151 monitor flat screen connected to the VGA port on the back of my Satellite P100 - 434 (PSPADE)

  I find that the screens seem to periodically - feeding cycle windows resize themselves and then the screens settle down again. This happens with the laptop and the external monitor.

  I've updated the latest available BIOS V4.20 (November 2, 2007) I use 7.15.11.6369 NVIDIA GeForce Go 7600 driver version. I'm under the edition of Vista Home Premium to standard build.

  I even resorted to the use of the dvd system recovery to rebuild completely the laptop and the problem persists. In Device Manager I have generic Non - PnP monitor and below that I have a generic PnP monitor I tried and it is not possible to get specific drivers for the monitor Vizitron L-151. * NOTE * I saw dxdiag that the external display is identified the Non - PnP device

  The display configuration that I'm trying to use is to have my laptop as the main screen with the external display on my left as an extension to the desktop. In display config my computer screen appears as number 2 with the additional display in the poster as a device 1

  While typing this my screens have made this three times and the last time, this IE7 window installs itself to the external display in restored down to size.

  If anyone has a glimpse of it, I would be very grateful. There are no problems when the external display is deleted.

  _I can reproduce this problem on demand_ by uninstalling the monitor Non - PnP Device Manager.

  Sorry, mate, but you ad confuses me a little and be hones I m not 100% sure what you take on
  You have some problems with the resolution of the external display or what?

  I've found another thread on the setting of the external screen as main screen:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=96263#96263

  According to this statement:
  > In display config my computer screen appears as number 2 with the additional display in the poster as a device 1
  It seems that the external monitor has been on the main screen and display books internal as external.

  I recommend you change this settings and to use books appear as 1 and the external display form 2.

• Problem with T400 and external monitor (1920 x 1200 resolution)

  Hello

  My laptop:

  ThinkPad T400 2767-C99 * (graphics: ATI Mobility Radeon HD 3470 256 MB / X4500MHD (Switchable Graphics)), OS is Windows XP

  I just installed the latest video driver from lenovo page (which also installs "ATI catalyst")

  Externale monitor:

  I just bought a Samsung SyncMaster 2443FW, 24 "TFT monitor with a maximum resolution of 1920 x 1200

  Problem:

  Monitor works fine with my new T400s and my old Acer laptop. However, with my T400 (described above), I can't do the monitor uses the 1920 x 1200 resolution. However, all the other ugly resolutions so I need it to work with 1920 x 120

  -If I change the resolution of right on the desktop of Windows XP (and then properties-online settings) and set the screen on 1920 x 1200 resolution, then my monitor used only a lower meanless (1440 x 900) and effect of scrolling as I move my pointer on the screen

  -If I use the ATI catalyst software to set the resolution, I can only chose smaller resolutions (he not go 1920 x 1200)

  Questions

  Is it a hardware (maybe the graphics card does not support 1920 x 1200) or a software problem (maybe a problem with the driver) or just a matter of adjustment?

  What can I do?

  Help would be much appreciated!

  * Original description: 2767-2JG base: T9550(2.66GHz), 4 GB of RAM, HD 250 GB at 5400 RPM, 14.1 LCD in 1440 x 900, 256 MB ATI Radeon 3470HD, CD-RW/DVD-RW, Intel 802.11agn wireless, Bluetooth, Modem, 1 GB ether, UltraNav, chip dry, RPF, camera, 9 c Li - ion, BACK license

  Problem solved:

  I was using my old monitor vga cable that doesn't use 14 pins (worked fine with my T400s and Acer laptop - but not with the T400).

  => When I switched to cable 15-pin that came with the monitor, the problem was gone!