Problems with my A30 recovery CD

Similar Questions

• Problem with the Toshiba recovery process

  Hi guys,.

  I had some problems with my laptop and decided to return to the factory settings. But during the process, because of a few mistakes that I didn't understand, formatting process was broken and I guess that the recovery in my hard drive section was damaged. So, I could not use boot from the hard drive. Becacuse Toshiba did not give me recovery disk when I bought it, I had to boot the pc with cracked windows. I never use illegal software, but I had to do this temporarily. In any case now Toshiba has sold me an extra price, thank you Toshiba!

  Today, I had the cargo, and Toshiba Turkey sent two recovery disks. In the first disc, there are preinst.swm files under the ZZIMAGES folder. And in the second disc, there are some files named as bin, efi, planfolder, boot, sources etc.

  What should I know? Hot to go back to my original windows? And how can I do a recovery of these two DVD recovery usb drive?

  Thank you, best regards better.

  Any help pls?

• Problems with system restore recovery disc

  I accidently turned off my computer when starting, so now it doesn't start any more.
  So, I finally burned an ISO recovery disk, and I use recovery tools by booting from a CD.  I have a system of two days, which has the chance to restore.  However, he says that the disc is damaged.  To restore, I must check the C drive.  However, I can't check that right now, because it is in use.  So I have to schedule a check disk for the next boot.
  However, the next time I start, it starts on the hard drive and then returns to the black screen - the original problem.  So, I have to turn it off and try something else.
  I'm really close, it seems and the files are there, I can't access it.  It is quite frustrating.  What should I do?  Don't forget, I have access to a prompt from here.
  So is there a way to recover my system, or what I need to get a Vista disk and reinstall? I have all my backup files, via Ubuntu, so if I have to, I can reinstall Vista.  I would like to avoid this if possible, however.

  Hello

  ·         Remember to make changes to your computer before this problem occurred?

  ·         You get code or error messages when you start the computer?

  ·         What is the brand and model of the computer?

  ·         You're able to boot in safe mode?

   

  Method 1:

  Try to use the last good known Configuration if you can't start Windows, but it started correctly the last time you have turned on the computer.

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

  Method 2:

  Safe mode safe mode and system restore

  Step 1:

  I suggest you to check if you can connect to the computer in safe mode:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  When you use safe mode to resolve problems with your computer, you might find the tools and useful features.

   http://Windows.Microsoft.com/en-us/Windows-Vista/diagnostic-tools-to-use-in-safe-mode

  Method 3: Startup Repair

  Try running Startup Repair in the windows recovery environment mode and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

• Problem with the Dell recovery and backup system

  Hello

  I have problem with dell backup and restore in my dell laptop (inspiron15). When I select the backup factory option > choose a drive then continues, he said 'Please sustained insert blank to keep media. "
  However, blank disc is already inserted and formatted with the live file system. Please help if anyone has the solution.

  Thank you

  Hello

  Thanks for your reply.

  Usually, the blank DVDs would be already formatted and ready to use as they are writing discs once. Please try to create the backup disk without formatting the DVD.

• Problems with Toshiba HDD Recovery

  Hello

  A few days ago, I bought a new Toshiba Satellite notebook, everything was going well until I started to delete or disable the programs that have been added automatically with Windows 7 Home Premium 64 bit on the HARD drive,
  because for me, most of them is really unnecessary and everytime when I checked the Task Manager it had before any process of more than 80.
  If everything seemed great until I rebooted the computer, after that there wasn't one more chance to log in windows, I tried several times, but without effect, even I tried via safe mode.
  It seemed like they were reduced.
  So I decided I will upload I want to install the new Windows 7 different version on the HARD drive, without thinking that he might restart former.
  and the problem started here because the hardware does not recognize the new version of Windows, I have all the drivers, I tried to download and add them, but did not work.
  Even Device Manager does not properly because it does not show same me I have the graphics card ATI, network card...

  I know I reacted stupidly, but is there a possibility that I can reboot, reinstall the old primary windows again, because I didn't erase them or I na not format the HDD but I installed the new version on
  One older so that they are still in place on the HARD drive, but under another brand windows.old.
  I also have on the other HARD drive recovery partition, or it's just better to him distribute service where they can solve the problem.
  If you have any tips or advice please tell me!

  Thanks for your response

  AL

  Oh AL what are you doing man. I mean why do you all this?
  The first step, you must do it with the new device is to check the s manuals and pick up some info about your new product.

  In this manual is clearly described that original recovery image is saved on the HARD drive and very important, is to create recovery DVD that you can use in the case if the HDD recovery procedure will not longer work.

  So what you have now?
  -screwed to the top of operating system
  -Nothing in the hand who can help you with recovery of OS install

  Only thing you can try now is to start HARD drive recovery in the hope that everything will work OK.
  Here the instructions how to do this > http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

  If this does not work, you have a big problem.
  Anyway send comments and let's see what you can do as the next step.

• Re: Partitioning is a problem with the Toshiba recovery system?

  I'm french, so don't be afraid of mistakes.

  I wonder if I can I repartition my HARD drive I want

  First, I explain what I realized with the FAQ:
  If Vista wouldn't boot, Toshiba Recovery in WinRE (eisa configuration) hidden partition offer we have to fix, and then use the DVD burn or HDDRecovery directory in E: to repair partition.

  My question is if I don't have the DVD (or I lost it):
  If I can I repartition my HARD drive (not the partition recovery, but expand the C: partition to reduce E :) partition without causing problems to recovery?)
  In other words the recovery to the boot partition will update the position of recovering files in E:
  And if it works, can I just copy - paste the E: c: HDDRecovery then E: while I format E:
  Thank you for your answers

  Juju313

  Hello!

  If you copy the folder of disk recovery HARD complete with all the files it should normally work, but I do not know Mr. I had never tried it.

  But if you have the Toshiba disk recovery is on the safe side. So, you can restore the factory settings whenever you want.

  Good bye

• HP a6567c problems with OS and recovery!

  So my desktop came with vista x 64 and it was not compatible with a lot of software that I was working with (audio recording/production). I downgraded to XP and found all the drivers appropriate successfully, but there was a big problem which, if I turned the monitor then next turn the system would block and I see a background with no icons and the manually restart the computer. This happens every time

  My first question is if there is a way to successfully run the XP on my a6567c? I had all the right drivers, but I do not leave the monitor on all the time to avoid the hit... I was running XP instead if possible

  Secondly, at the moment that I am trying to plant recover my original settings. I left the partition image factory of tact, but I guess I have no HP Recovery Assistant little more and cannot find a download for it. How can I recover my system? I tried to do from the start screen by pressing f11 but that doesn't work either...

  Help, please! and if anyone knows how to make XP pro stableon my machine, I'd be happy!

  1. strange problem I've ever seen. You manually turn off the monitor or implement power opt to let XP it turned off?

  You have the latest version of the Driver from Chipset Intel G33

  You have the latest version of the driver Nvidia graphics

  2. once change you the MBR on the use of drive C: F11 recovery no longer works, and as you saw the wizard also went... crushed by installing XP on C:. Did you by chance your Vista Recovery set before you install XP? Otherwise they can be ordered from HP at a low price

  .

  It is a procedure not supported (by HP) who has worked for many people. Use Disk Management in XP to view your hard disk partitions. Select the Recovery partition, right click and "Mark as active. To restart "without typing F11" the pc should start and start Vista recovery.

  http://www.theeldergeek.com/disk_management.htm

  Message edited by CherylG on 03/14/2009 10:05

• Problem with the Vista recovery disc

  I downloaded the neosmart Vista recovery disk.  I also downloaded the iso burner to create a bootable disk.  The first time, I used a DVD to make the bootable disc.  I then went to defective laptop (my dads - will not go beyond the page that is displayed when you stop suddenly).  I went into Setup to make searching the disk first to start.  I inserted the disc and everything works well, but only for the first, a short walk.  It tell me that windows loads the files and I see the bar moving across the screen.  Then I get the screen you see green bars that cross as if its about to start.  Next, I get a screen with a great slider and a small box saying error of Setup.exe.  If I do nothing, nothing happens, if I click OK it starts the whole process.  I decided to try everything from scratch and delete my copy of vista from torrent and re downloaded recovery disk.  I then burned on a CD using the standard iso-burner and exactly same problem again.

  I'm going wrong somewhere or is the computer of my father beyond saving?

  I got Dell fixed in my mind, for some reason any!

  Here is the link to the Forums in XP.

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  See you soon

  Mick Murphy - Microsoft partner

• Problems with HP supplied recovery disks

  HP Pavilion dv6325us

  The hard drive died on this computer so I installed a new and tried running the recovery provided with this computer disks when I bought it.  After you initialize the disk, I inserted the first disc and got the following error message:

  "This CD contains a backup of the software installed on a PC HP Pavilion and cannot be used with a PC HP Pavilion.  If you receive this message on a HP Pavilion, please call HP support. »

  I called support and they wanted me to pay for helping me through what I refused.  When I find the help topic on the support pages, he said this:

  See if you can find a Dell Vista Home premium neighbor installation disc, a friend or co-worker, you can use this to install Vista, after installation you need to change the key, as the Dell installation DVD will automatically put in a tone of Dell, but it will not allow activation, change the key by right click on "Computer" in the start menu put in the key of your sticker.

  If for any reason, it will not activate with your key sticker (make sure that you type it correctly), call Microsoft on the phone and they will guide you through have activated.

  Activation of Vista hotline 1-866-740-1256

  http://pcsupport.about.com/od/productkeysactivation/HT/changevistakey.htm

  .

• Console the two options at the start - problem with Restart of recovery and XP Professional

  I have the recovery console option at startup instead of wndows XP Professional. Currently, I put my computer starts automatically in Windows XP Professional after ten seconds have passed.

  It works normally except when my computer wants to stop and restart because a new program has been installed or changes have been made to the configuration of the software installed on my computer. In this case, my computer hangs just when it is trying to restart after it has been switched off.

  So my question is, has he entries I can make to the registry to force Windows XP start automatically in XP Professional after he stops for a reboot?

  Thank you for your help in this matter. I appreciate that very much.

  Hi Gak1952,

  Follow the steps in the article.

  Advanced Troubleshooting for General startup problems in Windows XP

  http://support.Microsoft.com/kb/308041

• Constant problem with hotmail account recovery

  Cause there trying to recover my hotmail account after being brutally locked up.  My account was closed for an unknown reason, then blocked password.  I tried many teeth don't get help from the Forums and many times LIVE ID.  Followed the instructions and email subject after email still nothing, account remains blocked and nobody answers to my email... What should I do?

  Hello

  I'm sorry, but we cannot help you in these forums of vista with your hotmail problems answers

  Please repost your question in hotmail in the hotmail link below forums

  http://windowslivehelp.com/product.aspx?ProductID=1

• Windows 7 on Satellite A500-1EE - problems with the system recovery

  After five years of good functioning sth went wrong. The system tries to boot but lack access to a device (HARD drive?). And then tries to download files to recover. After downloading the recovery fails and the only option is to shut down the computer. How can I recover this system?

  Recovery process is very simply.
  Did you create the recovery media (DVD)? If so you can use it for recovery image installation.
  Otherwise, you can use HARD drive recovery option (F8 > to fix your computer) and start the recovery image installation.

  Please test F8 option.

  If you have any other questions you are welcome.

• Problem with system recovery dvd

  I ordered the dvd from hp for my compaq presario notebook and when I got in I put disc 2, it won't return to the vista system recovery. and now my laptop does not start.

  I ordered the dvd from hp for my compaq presario notebook and when I got in I put disc 2, it won't return to the vista system recovery. and now my laptop does not start.

  Hey mjthomas1981

  you encounter a problem with the hp recovery discs, you should contact hp on their products

  Walter, the time zone traveller

• Satellite A100 - 147 Compression file error with the product recovery disc

  I have Toshiba A100-147, just out of warranty. I tried to recover with a disk, disk unpack to 69% and then I get the message "ERROR READING OF COMPRESSION FILE (1). I have no choice but to click OK in the error message box, and then quit the recovery as she stops running.

  Any help would be extremely welcome.

  Hello

  It looks like a problem with the Toshiba Recovery CD.
  Have you tried to repeat this procedure?

  What of the HARD drive? You format the HARD drive using an original CD of XP MS?
  It s very interesting if a format of HARD drive could allows to perform the installation of the OS since the Toshiba Recovery CD.

  I remember that something like this has happened on my laptop s friend was not able to recover the operating system using the Toshiba CD. Finally, we found that some sectors on the HARD disk has been corrupted. Format drive HARD allowed integer and my friend was able to install the image of Toshiba.
  It's worth a try ;)

  But of course, this error could occur because of the faulty recovery CD.

• Problem installing Windows XP Recovery on Satellite 5105-S702

  Don't know if it is the correct newsgroup for this problem.

  Tried to reinstall Win XP Pro on my PC Toshiba 5105-S702 using the recovery CD (circa 2001) that were provided with it, but was blocked at the beginning of the recovery process, with a message indicating that the product key is not valid. I suspect that it happened because originally faulty motherboard on laptop computer had been replaced by a new motherboard.

  Fortunately I had previously bought a Version XP Pro SP1 detail a few years before, so I was able to use it instead of the recovery CD.

  However I still would like to know how to solve this problem (with the original recovery with a new motherboard CD), before buying the retail Windows XP Pro version, in which case this problem also happens with my new laptop Pro M70.

  If you'd be grateful if someone could give advice.

  Thank you

  AlanCB

  Hi Alan

  Can you please tell me where you bought this laptop model? At first I thought that it is a model of cell US but I can't find it supports us page.

  In any case, I also think that this happen because of the exchange of the motherboard. DMI information is false and not identical with information on recovery media. Check please an interesting and similar problem on a thread Qosmio.

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=33330